9.3.1 to 9.3.3 Upgrade - Configuration utility does not start

Hello,
I am trying to upgrade my 9.3.1 environment (Tomcat/Oracle DB) to 9.3.3. I was able to upgrade Shared Services without issue. The next step from the upgrade documentation was to upgrade Essbase Client (again no issues), then Essbase server. At that point I noticed that I couldn't start the configuration utility, i.e., it just does not open up. It was creating an "hs_err_pid" log which said:
# An unexpected error has been detected by HotSpot Virtual Machine:
EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x08083d77, pid=3700, tid=2896
It seems that I get this after upgrading Essbase server, but not before. Has anyone seen this? Any help would be greatly appreciated.
Thanks in advance

I think this is related to java compatibility, I would try to see if JVM installed is compatible with the upgrade requirement.

Similar Messages

Configuration Utility does not start after 9.3.1 to 9.3.3 upgrade

Hi All,
I'm trying to upgrade my 9.3.1 VM environment to 11.1.2.1. So first i need to get it to 9.3.3 as per the supported upgrade path.
I followed the various readme and other docs and proceeded with the following order:
1. Shared Services
2. Essbase Clients
3. Essbase Server
Now after each of the first two upgrades, the Configuration Utility was working. After Essbase Server upgrade, The Configuration Utility just doesn't start up.
I also restored the original 9.3.1 image and this time tried upgrading the EAS as number 3 in the above order. Same result.
Every time I try starting the Utility, a new log is generated called "hs_err_pidxxxx.log" with the xxxx being a random 4 digit number.
A part of the error is posted below
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d7ce931, pid=3864, tid=12296
# Java VM: Java HotSpot(TM) Client VM (1.5.0_21-b01 mixed mode)
# Problematic frame:
# V [jvm.dll+0x8e931]
Has anybody come across this issue and have any suggestions to resolve this? Any help appreciated.
Thanks
Cheers,
Abhishek

Closing as no response.
Have also currently given up on this. Might get back sometime later.
Cheers,
Abhishek

After 10.5.4 upgrade Disk Utility does not longer format UBS FlashDrive to

After 10.5.4 upgrade Disk Utility does no longer format disk to FAT32 only FAT16.
I have use 2 different Mac to format my USB Drive and I still get FAT16 there is no drop down selection for FAT16 or FAT32. Both Mac are Intel and running the latest OSX 10.5.4. Actually, this happen after I upgraded to 10.5.4.
just wondering is anyone out there having the same issue, if someone know a way to fix this will be greatly appreciated.
P.S. The USB is a Lexar (it never gave me any trouble).

In that case, you're looking at doing an Archive & Install installation. See http://support.apple.com/kb/HT1545?viewlocale=en_US for details.

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

RAID Utility does not work after Vista upgrade

Hi,
I have a Qosmio G30 with 2 HD 120GB each. After I upgraded to Windows Vista from Windows XP, the Toshiba RAID Utility does not work anymore. In WXp it worked OK, but in Vista there is no way I can mirror the HD. That is, the utility itself work, but the button that should say Mirror, or something like that is not shown. I have set the drives to RAID-1 in the BIOS, but no go.
Is there any way to get the software RAID to work again?

Hi,
just a little question: While installing vista, did you installed the RAID-driver at installation time? Maybe this could be the reason why RAID cannot be activated properly.
Please give some feedback, if you installed the RAID drivers for Vista during the installation..
Cheers

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

BUG in iOS7: Post iOS7 upgrade, search option does not work for "Messages". If you want to search a contact name in Messages who is way below the list, the search will not yield any result.

These are user forums. You are not speaking to Apple here. Report your problem at Apple Feedback.

After upgrade to 2.6.28, vmware workstation does not start

After upgrading to the 2.6.28 kernel, vmware does not start. It complains with:
Could not open /dev/vmmon: No such file or directory.
Please make sure that the kernel module `vmmon' is loaded.
I have found that I can run the following command to load the modules:
vmware-modconfig --console --install-all
But after a reboot, the modules aren't loaded again.
Not sure how to get the modules to autoload properly.

You need to go to the wiki under Installing VMware.
Search until you find 2. Start and stop script
Create the script in /etc/rc.d directory and make sure you chmod 755 the file.
Add mkvmdev to the rc.conf file under daemons.
This should now work properly.
I was able to get it working using Vmplayer.

ITunes does not start when I plug in my iphone after I upgraded to Lion?

iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

http://support.apple.com/kb/TS1538

Itunes does not start anymore after upgrade to 6.05.20

I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
Any other idea?
Thanks
Christoph

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

After a ram upgrade to 8 GB mini does not start, control led is blinking and interval tut....tut is hearing..???, After a ram upgrade to 8 GB mini does not start, control led is blinking and interval tut....tut is hearing..???

Hello,
i tried to change the RAM on my Mac mini 2011 up to 8 GB RAM.
After installing the modules the mini does not start, led blinking and tut......tut....tut.
changhing back to the old modules, same problem.
Who can haelp? THANKS

Hello,
The following table lists the new tones and their meaning:
Tone(s)    Description
1 tone, a 5-second pause, repeat    No RAM installed
3 successive tones, a 5-second pause, 3 successive tones    RAM does not pass data integrity check
1 long tone when holding down the power button    Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones    Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538
Try reseating the RAM, or try the old RAM, the new one(s) may be bad or not Mac compatible.

Screensaver does not start after upgrading to 10.7

Since upgrading to 10.7 my screensaver does not start either by hot corner or automatically. I can get it to test from the preference pane, any suggestions?

Okay.... Sorry for calling the technology airplay vice AirPrint. I have done all the standard power reset and wireless tips (i.e.delete the wireless network, re-add the wireless network, even monitored the RF frequency spectrum to make sure nobody is stomping on my wireless signal, solid 32Mbits over a Cisco 1811w). I have over 28 years in networking experience. So, I assume you all the basic stuff has been covered. Before our Apple devices got upgraded to IOS7 (2 IPads and 2 iPhones), we had no problems printing to our Brother HL-5450DN series printer (updated to the latest firmware). I strongly believe it has something to do with the AirPrint discovery process as shared in my last post. My next step is to enable port mirroring and monitor the packet exchange using wireshark or tcpdump. This will probably have to wait until the weekend.

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

After yosemite upgrade junk mail does not work - is this a known issue

after yosemite upgrade junk mail does not work - is this a known issue?

Yes, it is a problem.

MSY does not start after upgrade from 50SP6 to SP11

Hello experts again,
after upgrading from 50sp6 to sp11 I cannot start MSY.
I've implemented note 1099457 - AMT is starting now,
but MSY still does not start.
Has anybody some experience what this could be ?
Thanks and best regards
Gerd

Hi,
as I assume the AMT is installed completely new when doing a SP upgrade because it is a standard tool which you cannot enhance. Therefore it is running properly.
Regarding MSY you need to perform a full generation within MAS (Visual Studio) after changing the generation settings to MSY (similar to MSA) because the runtime files like MSY.DLL need to be fitting to the new SP11 framework dlls.
Regards,
Wolfhard

9.3.1 to 9.3.3 Upgrade - Configuration utility does not start

Similar Messages

Maybe you are looking for