9 buttons to select display in a meter

I have a panel with 9 buttons next to LED's. There is also a Meter and a String indicator.
The idea is tha only 1 button can be active at any given time. The
corresponding label should appear displayed and the value assigned in
the meter. The LED's goes red when value climbs over threshold. I
have done the selction using a Case structure but so far
the button selection does not work.
Any ideas on how to display the different values for each button will be appreciated.
Thanks
Eduardo
(using 7.1)

Sorry, I meant to attach the snapshots. Here they are, I
hope it helps to understand what I want to achieve. The rest of the
program gets the signal from the COM port and saves it to a table. The
bit not working is the selection of what to display in the meter. It
just sticks with the default parameter...
Thanks for your time
Eduardo
Attachments:
Back1.JPG ‏82 KB
Back.JPG ‏82 KB
Front.JPG ‏68 KB

Similar Messages

Please solve Radio buttons (when selected) will then display on the report

Each of these new Radio buttons (when selected) will then display on the report in the same locations, which is after the existing columns.
Check boxes are by default checked.
When the 1st radio button is selected then a new column will be displayed in the ALV output
Next to A.
Like wise when 2nd radio button selected then a new column will be displayed in the ALV output next to B.
Like wise the ALV output is displayed.
A   is a checkbox
B is a checkbox
C   is a checkbox
D   is a checkbox
1   is a radio button
2   is a radio button
3 is a radio button
4   is a radio button

while populating fieldcatalog itself u include these condition....
if Pradiobutton = 'X'.
*--populate field catalog for field u want in specified position....
endif.
similarly u proceed for other fields and other condition

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

New tab in XD01 only when company code data button is selected

Hello all,
I added a new tab in XD01 with the help of BADIs CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS.
But the new tab is appearing at all levels i.e general as well as company code level.
But my client needs the new tab to be displayed only when the company code data button is selected.
How do I restrict this?
Any pointers to this would be highly appreciated.
Thanks in advance.
Regards,
Chandra.

Dear sriraj
If you found solution exactly Make it correct answer but remember in this Post to which Answer you have given Correct answer so dont do like this
Because in future people easily trace there solution
Dear Mahesh .. Here my intention to guide him only not to blame any one
thanks a lot

Error in search help button at selection-screen

hi all,
i have a small issue.
i have created a seach help button in selection screen .
my code is as bellow.
TYPES: BEGIN OF ty_ZSD_SNID,
       KUNNR TYPE KUNNR,
       BAREA TYPE WERKS_D,
      END OF ty_ZSD_SNID.
DATA : it_z TYPE STANDARD TABLE OF ty_ZSD_SNID.
selection-screen : begin of block b with frame title text-000.
select-options : skunnr for zsd_snid-kunnr.
parameters :     pbarea like zsd_snid-barea obligatory.
selection-screen : end of block b.
INITIALIZATION.
SELECT KUNNR BAREA FROM ZSD_SNID INTO TABLE it_z.
SORT it_z BY BAREA KUNNR.
DELETE ADJACENT DUPLICATES FROM it_z COMPARING BAREA KUNNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR SKUNNR-low.
IF it_z[] IS NOT INITIAL.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
             EXPORTING
          DDIC_STRUCTURE         = ' '
               retfield               = 'KUNNR' " data base table field name
          PVALKEY                = ' '
              dynpprog               = sy-repid " program name
              dynpnr                 = sy-dynnr          "screen name
              dynprofield            = 'SKUNNR-LOW' " layot field name
          STEPL                  = 0
          WINDOW_TITLE           =
          VALUE                  = ' '
              value_org              = 'S'
          MULTIPLE_CHOICE        = ' '
          DISPLAY                = ' '
          CALLBACK_PROGRAM       = ' '
          CALLBACK_FORM          = ' '
          MARK_TAB               =
        IMPORTING
          USER_RESET             =
             TABLES
               value_tab              = it_z[]   " internal talble name
          FIELD_TAB              =
          RETURN_TAB             =
          DYNPFLD_MAPPING        =
        EXCEPTIONS
          PARAMETER_ERROR        = 1
          NO_VALUES_FOUND        = 2
          OTHERS                 = 3
    IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ELSE.
    MESSAGE E000(zsdsn).
ENDIF.
my issue is , its working properly if records are there in my z table.
if no records are there in the table then if i do comment the last message statement then its working.
if i do uncomment like the above code, then its dumming.
what i should i do ??
kind regards

closed because of no answer.

Creating push button on Selection screen application toolbar

Hi Friends,
this is a HR-ABAP report. I have to create a push button on Selection screen. when user clicks on that push button 'MODAL DIALOG BOX' has to be displayed containing some data.
plz kindly give some sample code to do this.
Regards,
Radhika Dasharatha.

Hi,
1)Use SELECTION-SCREEN PUSHBUTTON /10(20) PUSH USER-
COMMAND 'ABC'. in selection screen.
2) Give the static name to button in INITIALIZATION event like PUSH = 'PRESS'.
3) At selection screen.
if sy-ucomm eq 'ABC'.
call FM HR_BE_GE_MODAL_DIALOG
endif.
Thanks
Sandeep
Reward if useful

Agent ready Radio button remains selected even though agent is on call.

Hi
issue
Agent logsin to Interacton center and system by default puts him in to NOT Ready Status.
Agent changes the status from Not ready to Ready.
Agent receives a call via queue
Agent accepts call via interaction center
Ready Radio button reamins selected even though customer care agent is on phone with Customer.
In idle situation the radio button should move from ready to not ready or any other state.
Landscape : SAP CRM / AMC MCIS / CISCO IPCC.
we did our system restarts still issue is not resolved.
Has anyone ever noticed this issue.
any Help or guidnace is really appreciated. Thanks in advance
Regards

Hi Alok,
That behavior may be just how your CMS and Telephony system behaves. In all likelihood you are not going to get a queued call at that point, since you already are on a queued call. As long as the state display is correct once the call is ended, that is the most important thing. I have seen some telephony systems where even the hard phone shows ready during the call, and doesn't change modes until after the call is ended. Anyway, you should check with your CMS vendor - in this case AMC MCIS.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Radio button and select option in one line

Hi,
I have an requirement in which i need to display the radio button and select option in one line in an report program.
How can i do it?
Regards,
Arun.

Hi,
Try this code.
TABLES: bkpf.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: p_r1 RADIOBUTTON GROUP a.
SELECTION-SCREEN COMMENT 4(20) text-001 FOR FIELD p_r1.
SELECTION-SCREEN COMMENT 30(12) text-002 FOR FIELD p_date.
SELECTION-SCREEN POSITION 39.
SELECT-OPTIONS: p_date FOR bkpf-budat OBLIGATORY.
SELECTION-SCREEN END OF LINE.
PARAMETERS: p_r2 RADIOBUTTON GROUP a.
text-001 = " Radio button"
text-002 = "Posting date"

Flex 3.5 Rich Text Editor Bold Button is Selected by default?

Hi and thanks in advance,
I'm creating dynamic forms via action script in flex builder with SDK 3.5.
One part of this form is a rich text editor, it creates and works just fine, but I have one little annoying issue the bold button is defaulted to on (selected)
The funny think is, if I lose focus on the text area of the RTE and de-select the bold button, as soon as I set focus to the text area again the bold button is toggled back on. This leads me to think that the text area which is empty is some how bold.
if I show an alert Alert.show( String( _rte.boldButton.selected ) ) after the RTE as been added to the form is shows false.
Even if I set _rte.boldButton.selected = false just to be sure it still displays the bold button as selected.
Its a basic RTE the only thing I'm doing is adding a validator if its required and removing the link bar
_rte.toolbar.removeChild(_rte.linkTextInput);
Any ideas are very much appreciated
flash harry...

Hi and thanks in advance,
I'm creating dynamic forms via action script in flex builder with SDK 3.5.
One part of this form is a rich text editor, it creates and works just fine, but I have one little annoying issue the bold button is defaulted to on (selected)
The funny think is, if I lose focus on the text area of the RTE and de-select the bold button, as soon as I set focus to the text area again the bold button is toggled back on. This leads me to think that the text area which is empty is some how bold.
if I show an alert Alert.show( String( _rte.boldButton.selected ) ) after the RTE as been added to the form is shows false.
Even if I set _rte.boldButton.selected = false just to be sure it still displays the bold button as selected.
Its a basic RTE the only thing I'm doing is adding a validator if its required and removing the link bar
_rte.toolbar.removeChild(_rte.linkTextInput);
Any ideas are very much appreciated
flash harry...

Push button on selection screen

Hi,
I have provided push button on selection screen after input fields I mean just below to input fields by using the syntax selection screen pushbutton.. And it is appearing on the selection screen. As per the requirement I need to enter material number on the selection screen and if I press corresponding push button I need to call one transaction using bdc program. I wrote case sy-comm and corresponding user command ( whatever is there in the selection screen syntax) in when condition under start of selection event.
But the control is not going to that place after I press push button. If I put that code inside of at selection screen it is going. But I can not write all the bdc program and select queries inside of at selection screen event if so please suggest me how I can proceed.
I will give the points.
Thanks a lot in advance.

Hi,
SELECTION-SCREEN BEGIN OF BLOCK b_2 WITH FRAME TITLE text-018.
SELECT-OPTIONS s_fields FOR qpmk-mkmnr NO-DISPLAY.
SELECTION-SCREEN PUSHBUTTON /1(24) name USER-COMMAND flds.
SELECTION-SCREEN END OF BLOCK b_2.
AT SELECTION-SCREEN.
IF sscrfields-ucomm = 'FLDS'.
PERFORM display_fields.
ENDIF.

Radio Buttons on Selection Screen

Hi,
I have four radio buttons on selection screen in a frame, all belonging to the same group.
When the program is called using transaction 1, first two radio buttons are displayed. When the program is called using transaction 2, bottom two radio must be displayed.
I am doing this using the following code.
The problem is : When last two are displayed, there is empty space left on the top and first two are displayed there is empty space left in the bottom of the frame. How can this be taken care of such there are no empty spaces in the box frame?
Code:
Radio Buttons for Table Name
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-005.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_ot   RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-001 FOR FIELD p_ot.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_exp   RADIOBUTTON GROUP grp1 MODIF ID one.
SELECTION-SCREEN COMMENT 5(31) text-002 FOR FIELD p_exp.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_cost   RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-003 FOR FIELD p_cost.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : p_att   RADIOBUTTON GROUP grp1 MODIF ID two.
SELECTION-SCREEN COMMENT 5(31) text-004 FOR FIELD p_att.
SELECTION-SCREEN END   OF LINE.
SELECTION-SCREEN END OF BLOCK bl1.
Initialization
INITIALIZATION.
Display Table Names depending on transaction calling the program
PERFORM display_table_names.
FORM display_table_names.
DATA : l_mod_id(3) TYPE c.
IF sy-tcode EQ 'ZVTEST1'.
    l_mod_id = 'ONE'.
ELSEIF sy-tcode EQ 'ZVTEST2'.
    l_mod_id = 'TWO'.
ENDIF.
LOOP AT SCREEN.
    IF screen-group1 EQ l_mod_id.
      screen-invisible   = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
ENDFORM.                    " display_table_names

Hi,
REPORT Z_SALES MESSAGE-ID ZZ                          .
*                             Variables                                *
DATA: IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
      IT_MSGS LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: V_FILE TYPE STRING.
*                         Internal Tables                              *
DATA: BEGIN OF IT_SALES OCCURS 0,
        AUART,
        VKORG,
        VTWEG,
        BSTKD,
        KUNNR_KUNAG,
        KUNNR_KUNWE,
        KETDAT,
        KPRGBZ,
        PRSDT,
        BSTKD_1,
        KUNNR_KUNAG1,
        KUNNR_KUNWE1,
        KETDAT_1,
        KPRGBZ_1,
        PRSDT_1,
        ZTERM_1,
        INCO1,
        INCO2,
        MABNR,
        KWMENG,
        BSTKD_2,
        KUNNR_KUNAG2,
        KUNNR_KUNWE2,
        KETDAT_2,
        KPRGBZ_2,
        PRSDT_2,
        ZTERM_2,
        INCO1_1,
        INCO2_2,
        KSCHL,
        KBETR,
      END OF IT_SALES.
*                       Selection-Screen                               *
*Selection Screen 1
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE(25) TYPE C,
             O_FILE(25) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
*Selection Screen 2
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS: CAL_TRA RADIOBUTTON GROUP G1 USER-COMMAND FLAG,
            SESSION RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B2.
*Selection Screen 3
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-003.
PARAMETERS: MODE DEFAULT 'X' MODIF ID BL1,
            UPDATE DEFAULT 'X' MODIF ID BL1.
SELECTION-SCREEN END OF BLOCK B3.
*Selection Screen 4
SELECTION-SCREEN BEGIN OF BLOCK B4 WITH FRAME TITLE TEXT-003.
PARAMETERS: SES_NAM(25) MODIF ID BL2,
            KEP_TRAS TYPE C DEFAULT 'X' MODIF ID BL2,
            LOC_DATE TYPE SY-DATUM MODIF ID BL2,
            USER TYPE SY-UNAME DEFAULT SY-UNAME MODIF ID BL2.
SELECTION-SCREEN END OF BLOCK B4.
*                     At Selection-Screen Output                      *
AT SELECTION-SCREEN OUTPUT.
IF CAL_TRA = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'BL1'.
        SCREEN-ACTIVE = '1'.
      ENDIF.
      IF SCREEN-GROUP1 = 'BL2'.
        SCREEN-ACTIVE = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
IF SESSION = 'X'.
    LOOP AT SCREEN.
      IF SCREEN-GROUP1 = 'BL1'.
        SCREEN-ACTIVE = '0'.
      ENDIF.
      IF SCREEN-GROUP1 = 'BL2'.
        SCREEN-ACTIVE = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
*                     At Selection-Screen                             *
AT SELECTION-SCREEN.
PERFORM VALIDATE_MANDATORY_FIELDS.
*****************            INITIALIZATION         ********************
INITIALIZATION.
LOC_DATE = SY-DATUM - 1.
*                       Start of Selection                             *
START-OF-SELECTION.
V_FILE = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = V_FILE
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = ' '
    TABLES
      DATA_TAB                = IT_SALES
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form VALIDATE_MANDATORY_FIELDS
*       text
FORM VALIDATE_MANDATORY_FIELDS.
IF P_FILE IS INITIAL OR O_FILE IS INITIAL.
    MESSAGE E000 WITH 'ENTER BOTH THE FILE NAMES'.
ENDIF.
IF CAL_TRA = 'X'.
    IF MODE IS INITIAL OR UPDATE IS INITIAL.
      MESSAGE E000 WITH 'ENTER BOTH THE OPTIONS'.
    ENDIF.
    IF SY-SUBRC <> 0.
      IF MODE <> 'A' OR MODE <> 'E' OR MODE <> 'N'
      OR MODE <> 'a' OR MODE <> 'e' OR MODE <> 'n'.
        MESSAGE E000 WITH 'Mode should be either A, E or N'.
      ENDIF.
      IF UPDATE <> 'S' OR UPDATE <> 'A'
      OR UPDATE <> 's' OR UPDATE <> 'a'.
        MESSAGE E000 WITH 'Mode should be either S or A'.
      ENDIF.
    ENDIF.
ENDIF.
IF SESSION = 'x'.
    IF SES_NAM   IS INITIAL
    OR KEP_TRAS IS INITIAL
    OR LOC_DATE IS INITIAL
    OR USER      IS INITIAL.
      MESSAGE E000 WITH 'ENTER ALL THE FIELDS'.
    ENDIF.
ENDIF.
ENDFORM.                    "VALIDATE_MANDATORY_FIELDS
Regards
vijay

In table view, how to add one button for selecting page?

Hi Experts,
In the OBIEE 11.1.1.6, we have one uncommon requirement that customers want to randomly select actual page to view expected data in table view.
For example:
We make use of some columns to create one report in table view, and set 'Rows per Page' equal to '5',
if this report contains 60 rows, it will have 12 pages, so customers want to select sepcial page number to view the some data. Is it possible to implement this requirement? Maybe we should write JS code.
Note: Below table view, it has four buttons: First Row, Previous Row, Next Row and Display (500) rows in per page. So we want to add one button to select per page.
We look at orgnial codes in WebBrowse, but do not know the following codes derive from which JS file.
Could you please tell me how to find this file?
<td class="TapeDeckCell"><img class="TapeDeckImage" onclick="" onkeypress="" src="res/s_blafp/viewui/pivot/first_dis.png" title="" alt="" ><img class="TapeDeckImage" onclick="" onkeypress="" src="res/s_blafp/viewui/pivot/previous_dis.png" title="" alt="" ><img class="TapeDeckImageEna" onclick="PTRowScroll('saw_5083_b','5','5', event)" onkeypress="PTRowScroll('saw_5083_b','5','5', event)" src="res/s_blafp/viewui/pivot/next_ena.png" tabIndex="0" onmouseover="PTTD(event, 'res/s_blafp/viewui/pivot/next_ovr.png');" onmouseout="PTTDO(event)" onmousedown="PTTD(event, 'res/s_blafp/viewui/pivot/next_dwn.png');" title="Next 5 Rows" alt="Next 5 Rows" ><img class="TapeDeckImageEna" onclick="*PTRowScroll*('saw_5083_b','-1)', event)" onkeypress="PTRowScroll('saw_5083_b','-1)', event)" src="res/s_blafp/viewui/pivot/showallrows_ena.png" tabIndex="0" onmouseover="PTTD(event, 'res/s_blafp/viewui/pivot/showallrows_ovr.png');" onmouseout="PTTDO(event)" onmousedown="PTTD(event, 'res/s_blafp/viewui/pivot/showallrows_dwn.png');" title="Display maximum (500) rows per page" alt="Display maximum (500) rows per page" > <Span class="TapeDeckRecords">Rows 1 - 5</Span></td>

Hi Kobe,
Thanks for listening me.
I agree 11g have some issues unlike 10g. I've tried the same by creating a measure rcount(1) and name it as Page in RPD. I just pulled column Page in pivot table section 'Pivot Table Prompts' it is working but this may not answer your requirements.
I would suggest to use the column in Prompt and go by between operator to allow user to select the rows between.
In the report make Page as prompted.
If you are okay with this can look forward to tweak it further, like values in the prompt multiple of 5 or 10s some thing like that.
let me know updates on the same.

Using command button to select query - WAD 7.0

Hello all
Can anyone please tell me how to configure a command button (button group) to display a particular query in WAD 7.0?
Here's what I mean -
I have a web template with three queries. I have inserted 3 command buttons on the template. I want to assign one button to one query, so that the users can select which of the three they want to view. Which Command do I select in the command wizard to do this? Also, is it possible to hide the other two queries, when one is selected?
Thanks
Karen

Hi,
Here is one approach - Keep three analysis items in the WT. Assign three different data providers to all three analysis items. If you do not want to show any query when the WT first loads, don't assign any query to the data providers. When a button is pushed, you can use the command SET_DATA_PROVIDER_PARAMATERS to assign a query to a DP so that that query will show up.
Other commands that will help you would be SET_ITEM_PARAMETERS using which you can hide analysis items and also, you can use the command BACK_TO_INITIAL_DP_STATE on data providers so that they do not show up if they were blank at the start.
Another way to hide a query is to assign the analysis item to a data provider which is blank.
For your requirements, you will have to put multiple commands behind each button - you can decide which of the above commands suit you best.

How to Add Push Button On Selection Screen

Hi Experts,
How to add Push button on Selection Screen.
Points will b rewarded for useful help.
Bohra.

Hi,
To create a pushbutton on the selection screen, you use:
SELECTION SCREEN PUSHBUTTON [/]<pos(len)> <push>
USER-COMMAND <ucom> [MODIF ID <key>].
The [/]<pos(len)> parameters and the MODIF IF addition have the same function as for the formatting options for underlines and comments.
<push> determines the pushbutton text. For <push>, you can specify a text symbol or a field name with a maximum length of eight characters. This character field must not be declared with the DATA statement, but is generated automatically with length <len>. The field must be filled before the selection screen is called.
For <ucom>, you must specify a code of up to four characters. When the user clicks the pushbutton on the selection screen, <ucom> is entered in the UCOMM of the SSCRFIELDS interface work area. You must use the TABLES statement to declare the SSCRFIELDS structure. The contents of the SSCRFIELDS-UCOMM field can be processed during the AT SELECTION-SCREENevent.
Ex.
REPORT DEMO.
TABLES SSCRFIELDS.
DATA FLAG.
SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE TIT,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT1 USER-COMMAND CLI1,
PUSHBUTTON 12(10) TEXT-020 USER-COMMAND CLI2,
END OF LINE,
BEGIN OF LINE,
PUSHBUTTON 2(10) BUT3 USER-COMMAND CLI3,
PUSHBUTTON 12(10) TEXT-040 USER-COMMAND CLI4,
END OF LINE,
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'CLI1'.
FLAG = '1'.
WHEN 'CLI2'.
FLAG = '2'.
WHEN 'CLI3'.
FLAG = '3'.
WHEN 'CLI4'.
FLAG = '4'.
ENDCASE.
START-OF-SELECTION.
TIT = 'Four Buttons'.
BUT1 = 'Button 1'.
BUT3 = 'Button 3'.
CALL SELECTION-SCREEN 500 STARTING AT 10 10.
CASE FLAG.
WHEN '1'.
WRITE / 'Button 1 was clicked'.
WHEN '2'.
WRITE / 'Button 2 was clicked'.
WHEN '3'.
WRITE / 'Button 3 was clicked'.
WHEN '4'.
WRITE / 'Button 4 was clicked'.
WHEN OTHERS.
WRITE / 'No Button was clicked'.
ENDCASE.
This example defines four pushbuttons on a selection screen that is displayed as a
dialog box. The selection screen is defined in a statement chain for keyword
SELECTION-SCREEN.
If the text symbols TEXT-020 and TEXT-040 are defined as 'Button 2' and 'Button 4',
the four pushbuttons appear as follows on the selection screen displayed as a dialog box.
Regards,
Bhaskar

9 buttons to select display in a meter

Similar Messages

Maybe you are looking for