9 Pro Extended: Paper Size: Automatic in Configure Presets but get 8.5 x 14 on scan

Using 9 Pro Extended on Win 7 with Epson Workforce 645 Printer.
When I scan a letter size document into Acrobat the page size ends up legal.
In File/Create PDF from Scanner/Configure Presets the Paper Size is set to Automatic.
Is there something else that needs to get set to allow Acrobat to get the paper size automatically from the scanner?
Thanks.

OK, I see.
The scanner needs to be sending the page size info so that Acrobat can use it
for the Auto setting.
I did a scan with the size set to Letter. Now it seems to be sticking with that size.
Thanks.

Similar Messages

How hp laserjet 8150 series pcl can pick from tray any paper size automatically

hi,am using hp laserjet 8150 series pcl and initially tray 2 used to pick a4 papers automatically.i need any of the trays to pick customised paper of 7inches by 11.7 inches automatically

Hi there Wolf!
I have a couple of articles here that I believe will help you out with your question. First, here is an article with some information on custom paper sizes:
OS X Mountain Lion: Manage custom paper sizes
http://support.apple.com/kb/PH10748
Note that in that article, it states:
Custom paper sizes aren’t available for some printers.
The reason for that is because this is controlled by the driver for the individual printer. You will want to make sure you have the latest version of the printer driver installed on your computer. More information on this can be found in the following article:
Printer and scanner software available for download
http://support.apple.com/kb/HT3669
It might also be helpful to reset your printing system to see if that will resolve the issue. More information on this process can be found here:
Mac OS X: How to reset the printing system
http://support.apple.com/kb/HT1341
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Pixma Pro-100 paper size

Is there anything to prevent the printer from using roll paper for prints 13" x greater than 19"?

The on-screen manual states: Non-standard sizes:You can print on non-standard size paper within the following ranges. rear tray- Minimum size: 3.50 x 5.00 inches (89.0 x 127.0 mm)- Maximum size: 12.95 x 26.61 inches (329.0 x 676.0 mm) manual feed tray- Minimum size: 8.00 x 10.00 inches (203.2 x 254.0 mm)- Maximum size: 14.00 x 23.00 inches (355.6 x 584.2 mm)

I purchased the Lenea-pro scanner for my I-touch, where can I get an APP or software for scanning like you do in your Apple stores?

Where can i get software or APP like they use in the Apple stores for their ipod and scanning?

http://ipclineapro.com/ipc/apps/
Regards.

HOW TO CREATE TEXTELEMENTS AUTOMATICALLY I WROTE PROG BUT GETTING ERROR?

DATA: ITAB TYPE TABLE OF STRING,
      WA_LINE TYPE STRING,
      LENGTH TYPE I,
      STRING1 TYPE STRING,
      T1 TYPE STRING VALUE 'TEXT-',
      RESULT TYPE STRING,
      KEY(3) TYPE N VALUE 001,
      IDX TYPE SY-TABIX,
      IT_STRING TYPE TABLE OF STRING,
      IDX1 TYPE SY-TABIX VALUE 2,
      WA_STRING TYPE STRING,
      LIN TYPE I,
      LIN1 TYPE I,
      FLAG(1) TYPE C.
DATA : TARGET_TEXTPOOL TYPE TABLE OF TEXTPOOL.
DATA : WA TYPE TEXTPOOL.
*PROG = 'Z_TEXT1'.
PARAMETERS PROG TYPE C LENGTH 30.
READ REPORT PROG INTO ITAB.
LOOP AT ITAB INTO WA_LINE.
IF WA_LINE IS NOT INITIAL.
    IDX = SY-TABIX.
    IF WA_LINE CS ''''.
      IF WA_LINE NS 'WHEN' AND WA_LINE NS 'SET' AND WA_LINE NS 'SELECT'
        AND WA_LINE NS 'CHECK' AND WA_LINE NS '*.TXT' AND WA_LINE NS 'CALL'
        AND WA_LINE NS 'MESSAGE' AND WA_LINE NS 'DEFAULT'.
       SPLIT WA_LINE AT '''' INTO TABLE IT_STRING.
       DESCRIBE TABLE IT_STRING LINES LIN.
       LIN1 = LIN / 2.
       DO LIN1 TIMES.
        READ TABLE IT_STRING INTO WA_STRING INDEX IDX1.
        IF WA_STRING IS INITIAL.
          EXIT.
        ENDIF.
          LENGTH = STRLEN( WA_STRING ).
             IF LENGTH > 3.
        WA-ID = 'I'.
        WA-KEY = KEY.
        WA-ENTRY = WA_STRING.
        WA-LENGTH = LENGTH.
        APPEND WA TO TARGET_TEXTPOOL.
      INSERT TEXTPOOL PROG FROM TARGET_TEXTPOOL LANGUAGE SY-LANGU.
      INSERT REPORT PROG FROM itab.
        INSERT WA INTO TABLE
        CONCATENATE T1 KEY INTO RESULT.
        CONCATENATE '''' WA_STRING '''' INTO STRING1.
        REPLACE STRING1 IN WA_LINE WITH RESULT.
        MODIFY ITAB FROM WA_LINE INDEX IDX.
       INSERT TEXTPOOL PROG FROM TARGET_TEXTPOOL LANGUAGE 'E'.
        KEY = KEY + 1.
        IDX1 = IDX1 + 2.
CLEAR WA_STRING.
CLEAR STRING1.
ENDIF.
      ENDDO.
          ENDIF.
        ENDIF.
    CLEAR WA_LINE.
ENDIF.
IDX1 = 2.
ENDLOOP.
loop at itab into wa_line.
write:/ wa_line.
endloop.
   INSERT TEXTPOOL PROG FROM TARGET_TEXTPOOL LANGUAGE SY-LANGU.
       INSERT REPORT PROG FROM itab.
WRITE 'HI'...

hi guru,
i have written code but i am not able to display the TOTAL text at the end please verify the code.
*& Report ZSALES_DISCOUNT
REPORT ZSALES_DISCOUNT.
type-pools: slis.
tables: vbak,vbap.
SELECT-OPTIONS: so_vbeln for vbak-vbeln.
types: begin of ty_vbak,
       VBELN type vbak-vbeln,
       ERDAT type vbak-erdat,
       NETWR type vbak-netwr,
       WAERK type vbak-waerk,
       end of ty_vbak,
       begin of ty_vbap,
       vbeln type vbap-vbeln,
       POSNR type vbap-posnr,
       KWMENG type vbap-KWMENG,
       VRKME TYPE VBAP-VRKME,
       NETWR type vbap-netwr,
       WAERK type vbap-waerk,
       DISAMT type vbap-netwr,
       end of ty_vbap.
data: w_vbak type ty_vbak,
      it_vbak type table of ty_vbak,
      w_vbap type ty_vbap,
      it_vbap type table of ty_vbap,
      w_fieldcat type slis_fieldcat_alv,
      i_fieldcat type slis_t_fieldcat_alv,
      w_fieldcat1 type slis_fieldcat_alv,
      i_fieldcat1 type slis_t_fieldcat_alv,
      w_slis_selfield type slis_selfield,
      user_command type SLIS_FORMNAME,
      W_IS_LAYOUT TYPE SLIS_LAYOUT_ALV,
      repid type sy-repid,
      V_LINES TYPE I,
      i_event TYPE slis_t_event,
      i_sort TYPE slis_t_sortinfo_alv,
       wa_sort TYPE slis_sortinfo_alv.
W_FIELDCAT-COL_POS = '1'.
W_FIELDCAT-FIELDNAME = 'VBELN'.
W_FIELDCAT-OUTPUTLEN = '20'.
W_FIELDCAT-SELTEXT_L = 'SALES DOCUMENT NUMBER'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = '2'.
W_FIELDCAT-FIELDNAME = 'ERDAT'.
W_FIELDCAT-OUTPUTLEN = '20'.
W_FIELDCAT-SELTEXT_L = 'Date of Order Created'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
W_FIELDCAT-COL_POS = '3'.
W_FIELDCAT-FIELDNAME = 'NETWR'.
W_FIELDCAT-OUTPUTLEN = '20'.
W_FIELDCAT-SELTEXT_L = 'net value of sales order'.
APPEND W_FIELDCAT TO I_FIELDCAT.
CLEAR W_FIELDCAT.
w_FIELDCAT-COL_POS = '4'.
W_FIELDCAT-FIELDNAME = 'WAERK'.
W_FIELDCAT-OUTPUTLEN = '20'.
W_FIELDCAT-SELTEXT_L = 'net value currency'.
APPEND W_FIELDCAT TO I_FIELDCAT.
W_FIELDCAT1-COL_POS = '1'.
W_FIELDCAT1-FIELDNAME = 'VBELN'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = 'SALESORDER_NO'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
CLEAR W_FIELDCAT1.
W_FIELDCAT1-COL_POS = '2'.
W_FIELDCAT1-FIELDNAME = 'POSNR'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = 'ITEMS'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
CLEAR W_FIELDCAT1.
W_FIELDCAT1-COL_POS = '3'.
W_FIELDCAT1-FIELDNAME = 'KWMENG'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = 'NET_QUANTITY'.
W_FIELDCAT1-qfieldname = 'VRKME' .
W_FIELDCAT1-qtabname = 'VBAP' .
W_fieldcat1-datatype = 'QUAN'.
W_fieldcat1-do_sum = 'X'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
CLEAR W_FIELDCAT1.
W_FIELDCAT1-COL_POS = '4'.
W_FIELDCAT1-FIELDNAME = 'VRKME'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = 'NET_QUANTITY'.
W_fieldcat1-datatype = 'UNIT'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
CLEAR W_FIELDCAT1.
W_FIELDCAT1-COL_POS = '5'.
W_FIELDCAT1-FIELDNAME = 'NETWR'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = 'NET_AMT'.
W_FIELDCAT1-cfieldname = 'WAERK'.
W_FIELDCAT1-ctabname = 'VBAP'.
W_fieldcat1-datatype = 'CURR'.
W_fieldcat1-do_sum = 'X'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
CLEAR W_FIELDCAT1.
W_FIELDCAT1-COL_POS = '6'.
W_FIELDCAT1-FIELDNAME = 'WAERK'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = 'CURRENCY'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
CLEAR W_FIELDCAT1.
W_FIELDCAT1-COL_POS = '7'.
W_FIELDCAT1-tabname = 'IT_VBAP'.
W_FIELDCAT1-FIELDNAME = 'DISAMT'.
W_fieldcat1-do_sum = 'X'.
W_FIELDCAT1-OUTPUTLEN = '20'.
W_FIELDCAT1-SELTEXT_L = '30% DISCOUNT_AMT'.
W_FIELDCAT1-cfieldname = 'WAERK'.
W_FIELDCAT1-ctabname = 'VBAP'.
W_fieldcat1-datatype = 'CURR'.
APPEND W_FIELDCAT1 TO I_FIELDCAT1.
W_IS_LAYOUT-ZEBRA = 'X'.
W_IS_LAYOUT-NO_VLINE = 'X'.
W_IS_layout-no_input = 'X'.
W_IS_layout-colwidth_optimize = 'X'.
W_IS_layout-totals_text = 'Totals'(201).
START-OF-SELECTION.
PERFORM SORT.
PERFORM build_events.
SELECT VBELN ERDAT NETWR WAERK from VBAK into table It_vbak where vbeln in so_vbeln.
repid = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM      = repid
    I_CALLBACK_USER_COMMAND = 'INTERACTIVE'
    IS_LAYOUT               = w_is_layout
    IT_FIELDCAT             = i_fieldcat
TABLES
    T_OUTTAB                = it_vbak
EXCEPTIONS
    PROGRAM_ERROR           = 1
    OTHERS                  = 2.
*&      Form INTERACTIVE
      text
     -->R_UCOMM      text
     -->RS_SELFIELD text
FORM INTERACTIVE USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
IF RS_SELFIELD-FIELDNAME = 'VBELN'.
    DATA: TEMP_VBELN TYPE VBAK-VBELN,
          total TYPE STRING,
          subtot_text TYPE slis_subtot_text.
    CASE R_UCOMM.
      WHEN '&IC1'.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = RS_SELFIELD-VALUE
          IMPORTING
            OUTPUT = TEMP_VBELN.
        TEMP_VBELN = RS_SELFIELD-VALUE.
        SELECT VBELN POSNR KWMENG VRKME NETWR WAERK INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
        FROM VBAP WHERE VBELN = TEMP_VBELN.
        IF sy-subrc = 0.
          SORT IT_VBAP BY VBELN POSNR KWMENG .
        ENDIF.
        LOOP AT IT_VBAP INTO W_VBAP .
          W_VBAP-DISAMT = ( ( W_VBAP-NETWR / 100 ) * 30 ).
          W_VBAP-DISAMT = W_VBAP-NETWR - W_VBAP-DISAMT.
          MODIFY TABLE IT_VBAP FROM W_VBAP.
        ENDLOOP.
       PERFORM SORT.
       PERFORM EVENT.
       PERFORM SUBTOTAL_TEXT CHANGING subtot_text.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            I_CALLBACK_PROGRAM = REPID
            IS_LAYOUT          = w_is_layout
            IT_FIELDCAT        = I_FIELDCAT1
            it_events          = i_event
            i_default          = 'X'
          TABLES
            T_OUTTAB           = IT_VBAP
          EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.
    ENDCASE.
ENDIF.
ENDFORM.                    "INTERACTIVE
*&      Form sub_populate_sort
      text
FORM SORT .
wa_sort-spos = '01' .
wa_sort-fieldname = 'VBELN'.
wa_sort-tabname = 'IT_VBAP'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
ENDFORM.                    "sub_populate_sort
*&      Form sub_get_event
      text
FORM build_events.
CONSTANTS : c_formname_subtotal_text TYPE slis_formname VALUE
'SUBTOTAL_TEXT'.
DATA: l_s_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = i_event
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
Subtotal
READ TABLE i_event INTO l_s_event
                    WITH KEY name = slis_ev_subtotal_text.
IF sy-subrc = 0.
    MOVE c_formname_subtotal_text TO l_s_event-form.
    append l_s_event to i_event.
   MODIFY i_event FROM l_s_event INDEX sy-tabix.
ENDIF.
ENDFORM.                    " sub_get_event
*&      Form SUBTOTAL_TEXT
      text
     -->P_TOTAL        text
     -->P_SUBTOT_TEXT text
FORM c_formname_subtotal_text CHANGING P_TOTAL TYPE ANY
                      p_subtot_text TYPE slis_subtot_text.
IF p_subtot_text-criteria = 'VEBLN'.
    p_subtot_text-display_text_for_subtotal
    = 'TOTAL'(001).
ENDIF.
ENDFORM.                    "subtotal_text

HP Officejet Pro 8100 ePrinter & custom paper sizes

Have found all the helpful instructions about creating new custom paper sizes in Windows 7. But am complete novice & need to buy a printer for a charity. Settled on this model because of good reviews but most work will be 1 document of custom paper size. Need to know if the instructions given are fail-proof!! (Before i spend their money.)
This question was solved.
View Solution.

Hello invqn,
after having performed some detailed research, as well as installing the Pro 8100 (and other products) on a Windows 7 system, we determined the Pro 8100 doesn't support Custom Sizes: that was by design and intent.
Note that one of our engineer's proposed using a different set of drivers (from an older device) as a potential work-around, but this is unproven and may serve to limit your overall functionality of the device.
However, we did confirm that a newer device that is currently out, the HP Officejet Pro 8610 (or 8620 or 8630) e-All-in-One, DOES support custom sizes; these are multi-function printers.
Using the instructions in the link you sent, you can create new Forms with custom sizes and it will show up in the Printer Properties for you to use/select. It supports custom sizes from 3.00 x 5.00 in. to 8.50 x 14.00 in.
Our intent is only to provide information on what we know; you might take a moment and perhaps see if an HP Marketing representative might be able to give you more information, but that's what we have.
We hope this helps....
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved

Architectural paper sizes in Acrobat

I know that standard architectural paper sizes are available to Arcobat, but I don't know how to make Acrobat (6.0) know about them. "Postscript custom page size" is NOT an option. How do I install paper sizes? Thanks.

The AutoCAD discussion group indicates that Architectural paper sizes are automatically available in Acrobat Pro. Is this the case? How can I find out prior to spending $500?

Changing Paper size does not change page break?

I am using Oracle Report R6i.
I have created a matrix report showing months horizontally and items vertically. By default, the report displays a vertical line (Page Break Line) at 8 inches (as shown in Ruler).
I change the paper size in Page Setup Menu but still the page break line displaying at 8 inches due to which only 03 months are displaying per page at Landscape mode. My page size is : 210x230 cm.
How can I extend that page break line so that atleast 6 months to be displayed per page.
Regards,
Luqman

Changing the size used by the printer with the page setup dialog does not affect how Reports formats the output. You need to change Reports page size for this.
In 6i, the page size for Reports is controlled by properties against the Section objects (header, main, trailer) in the navigator.
In 2.5 you would set the vertical and horizontal page size in the Reports property palette for all sections. With the introduction of individual sections in 6i, each section can have it's own page size.
In your example you probably want to change the page size against the "main section" to 13" x 8.26" to get the report to format in Landscape. Also remember to set the ORIENTATION parameter or property to "Landscape" so that the printer is set to Landscape as well.

How to set the paper size when printing to postscript...

I need help in setting the paper size in the PrintPreference when using either the Postcript File or Adobe PDF printer to generate ps files.
Here's what I am doing (in c++) and I seem to be getting only 8.5x11 no matter the document page size:
LPDISPATCH p_Dispatch = Document.DocumentPreferences();
p_Dispatch = Document.DocumentPreferences();
if(p_Dispatch)
DocPreference docPreference(p_Dispatch);
pgOrientation = (idPrintPageOrientation)docPreference.get_PageOrientation();
pageW = docPreference.get_PageWidth();
pageH = docPreference.get_PageHeight();
paperSize = docPreference.get_PageSize();
docPreference.ReleaseDispatch();
p_Dispatch = Document.PrintPreferences();
if (p_Dispatch)
{ PrintPreference printPreference(p_Dispatch)printPreference.SetPrinter(idPostscriptFile);
printPreference.PrintFile(outfile);
printPreference.SetPaperSize(paperSize ); /*I have also tried idCustom but it crashes with invalid parameter for the object type.*/
printPreference.SetPaperWidth(pageW);
printPreference.SetPaperHeight(pageH);
VARIANT vprinterPresetType;
vprinterPresetType.vt = VT_I4;
vprinterPresetType.lVal = CInDesignApplication::idCustom;
Document.PrintOut(FALSE, vprinterPresetType);....
So how do i pas the document paper size to the print preset or preference?
I appreciate your input.

Moving this discussion to the Scanning & OCR forum.

Two printers with different paper sizes. How to setup defaults for each?

I have two printers connected to my beloved Mini: Samsung ML-1610 & Epson AccuLaser C1100.
First printer uses American Quarto US Letter paper.
Second one - European A4.
Every time I try to print anything on either of them I receive a message from printer driver that paper size mismatched. Further more either printer will wait until I press buttons on them to "proceed". Which is very annoying to say the least.
How can I setup defaults for every printer in Mac OS Leopard? If I use printer preferences dialog it will setup either size for both printers rather than for each its own.
Please advise.

PAHU wrote:
You cannot do exactly what you want from a user interface perspective. I am not sure if such a thing is possible by making changes to hidden files. I certainly haven't heard of it but it may still be possible.
From what I have seen, the page setup dialog is independent of the print dialog. If you set the 'Format for' to one printer, a then choose a different printer when you print, the previous settings won't apply.
You could see if the printer set to A4 supports automatic conversion of LTR to A4. Then at least it won't ask for attention when you send a LTR page to it. Otherwise I think your only option is to check before you print that you have selected the correct paper size for the printer.
PaHu
That's freaking ridiculous!!!
You've got to be kidding me... right?
Even MacOS 8 could do this.
Like it's horrible for me because I print a lot of photos. So I set my default paper type Format for: Canon MP610 series, Paper Size: US Letter (borderless). But then when I go home and print web pages or text documents on my Apple LaserWriter 16/600 PS, then it still remains set to Format for: Canon MP610 series. The freaking OS knows what printer I'm using; why would it remain formatted for the other printer even though that will cut off the edges of all my prints (since the LaserWriter does not do borderless printing) -- and not even warn me?! I just wasted 30 pages!
I cannot tell you how preposterous it is that a modern OS like Mac OS X cannot even get a simple thing such as printing correct. How could they screw up PRINTING?!
-Jon

How to keep Acrobat Pro Extended open?

No matter what I do, when I open Acrobat Pro Extended, it will automatically close itself within ten seconds. What should I do or what might be the problem as I have not had this problem with other Acrobat products and this one installed properly? Thank you...

Try this:
http://www.adobe.com/support/contact/licensing.html

Acrobat XI configure presets for page size??

Configure presets will not allow you to change the page size from automatic. I get legal size documents instead of letter size.

Hey Gregory,
Please refer the KB doc links mentioned below:
Scanning Letter size document results in Legal size PDF | HP | Acrobat
Troubleshoot scanner issues
Let me know if this helps.
Regards,
Anubha

HP Officejet Pro 8500 A910, 2 sections different paper size, prints incorectly

I have an HP Officejet Pro 8500 A910.
My Word document has 2 pages in 2 sections the first page and section is an envelope and the second page is a letter. On the 8500, if I choose to print just the 2nd page (the letter) it uses the envelope paper size and print half the width. Tried Word 2003/2007/2010 same thing.
This prints fine on an BusinessJet pro2230
Brian

Hi monkplayer,
It looks like your problem is solved? There wasn't a problem with the printer itself, just the printer settings on your Mac?
This is good information though. We don't always have detailed solutions for customers that are using Safari, since it is hard to write instructions for the general public with specific steps for each operating system.
Best of luck,
Mary
{I work on HP's behalf}

HP Officejet Pro 6830 e-All-in-One series Scanning Paper Size problem

I only use A4 paper but it seems that when I use the paper feed to scan a document to the computer, the document scans in a default Letter Size, rather than A4, thereby missing some of the information at the bottom of the page.
I would like to alter the default on the printer to ALWAYS default to A4. Can this be done? I was using the scan option on the printer screen rather than from the computer, where I would have to manually change the paper size every time.
Thank you

Welcome to the HP Community, @Splatt13 ,
I read your message about wanting your scans to default to A4 size, instead of Letter. I was playing around with the HP Scan software and saved the image below for you to see. Try opening up the software from your computer, and change the scanning options in there to whichever settings you want and that should help you scan as A4 size.
Side note: Ensure you have the Full Feature driver and software installed to access the software options: HP Officejet Pro 6830 e-All-in-One Printer series Full Feature Software and Drivers
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

9 Pro Extended: How to get Typewriter Font & Font Size menus?

I'm using Acrobat 9 Pro Extended on Windows/XP/SP3.
I use the Typewriter Tool quite frequently to insert text into a document.
I have the Typewrite Toolbar enabled and it is docked with my other toolbars.
When I want to insert text I click the typewriter icon on the toolbar.
My mouse pointer changes to a vertical bar with an A next to it.
I move to the insertion point and left click which leaves a vertical bar positioned at the insertion point.
Most of the time the Typewriter Toolbar is then 'opened' so that I can change the font or the font size.
But sometimes when I click, those parts of the Typewriter Toolbar stay grayed out.
The five icons between the typewriter icon and the drop down menus for font and font size are
also grayed out. I've tried a number of things to try to make those items available but have
never been able to figure out something that works. I can insert text. I just can't alter
the characteristics of the text.
Any ideas why the font and font size menus stay grayed out in the Typewriter Toolbar?
Thanks!

There is no way in PSE to change the font size of menu options in Photoshop Elements. You can try changing the resolution of your monitor.

9 Pro Extended: Paper Size: Automatic in Configure Presets but get 8.5 x 14 on scan

Similar Messages

Maybe you are looking for