9 Pro Extended: Windows XP Scanner funktioniert als User plötzlich nicht mehr

Hallo Helfer,
habe da ein für mich völlig unlogisches Problem: Als Admin kann ich unter Acobe Acrobat 9 Pro extended den Scanner ganz normal nutzen, aber als User bekomme ich immer folgende Fehlermeldung:
"Bei der Kommunikation mit dem Scanner ist ein Fehler aufgetreten:
Der asugewählte Scanner wurde nicht gefunden."
Wie ich nach einigem Ausprobierne feststellte, ist ein weiterer Scanner, den ich als Test mal habe mitlaufen lassen, offensichtlich "Schuld" daran. Wenn ich den 2ten Scanner eingeschaltet habe, funktioniert alles einwandfrei, Sobald er aus ist, kommt die Fehlermeldung.
Einer eine Idee, woran das liegt. Werde jetzt noch einmal einen anderen User testen, ob das Problem nur für diesen eine User typisch ist, aber seltsam ist es doch.
Vielen Dank für eure Mühen im Voraus

Eventuell verwenden beide Scanner den selben virtuellen USB-Port, aber nur eventuell.
Ich würde beide Scanner-Treiber noch mal über den Gerätemanager deinstallieren und dann jeden Scanner an eine anderen USB-Anschluss anschließen und installieren.

Similar Messages

  • Warum funktioniert iCloud plötzlich nicht mehr? Ich habe nicht mal gefummelt. Technischer Fehler?

    Find ich schon komisch, warum iCloud plötzlich nicht mehr funktioniert. Habe ich nicht mal gefummelt. Es kommt von alleine.
    Meldung "E-Mails können nicht empfangen werden" zeigte mir. "Benutzername oder das Kennwort für iCloud ist nicht korrekt.
    Es scheint so, als ob ich Benutzername oder Kennwort geändert habe. Das hab ich nicht geändert. Habt Ihr erlebt?
    viele grüße,
    Kersten

    Hi Anwesha
    I restored my laptop how i byed it.
    from win 8 i maked all updaes incl. win 8.1 and now i look for the updates from win 8.1 and controll if the pse is going.
    pse run actually.
    If the problem return i send you a message. ok?
    Thanks for your help.
    Have a good day.
    Verena
    Gesendet von Windows Mail
    Von: Anwesha Dev Chaudhary
    Gesendet: Donnerstag, 15. Januar 2015 14:10
    An: Verena Keller
    Warum funktioniert pse 13 nicht mehr
    created by Anwesha Dev Chaudhary in Photoshop Elements - View the full discussion 
    Please give this a try:
    While launching PSE Editor, keep CtrlAltShift key pressed.
    You will see a dialog asking to clear Photoshop Elements Settings.
    Click OK and see if it helps.
    Thanks,
    Anwesha
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7098642#7098642 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7098642#7098642
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • IdeaPad U430p Display funktioniert nach Anschluss an Monitor nicht mehr

    Hallo liebe Lenovo-Community,
    ich hoffe ihr könnt mir bei meinem Problem behilflich sein.
    Mein Problem ist folgendes:
    Wenn ich das Ideapad an einen externen Monitor anschließen und danach wieder abschließe, funktioniert das Display des IdeaPads nicht mehr richtig. Das heißt konkret, dass das Display beleuchtet ist aber komplett schwarz ist. Erst wenn ich das Notebook im abgesichterten Modus neustarte funktioniert das Display wieder. Den Treiber der Graka habe ich aktualisiert.
    Vielen Dank im Voraus.
    Gruß,
    Tarik

    Hallo Tarik,
    danke für die Rückmeldung.
    Also normal ist es definitiv nicht!
    Das Display sollte eigentlich nach drücken der Funktionstaste umswitchen, spätestens aber nach Neustart des Gerätes.
    Deinstalliere doch einmal den Grafik-Treiber, starte das System neu und installiere dann den ursprünglichen Grafik-Treiber.
    Sollte das Problem weiterhin vorhanden sein, kontaktiere einmal unseren Technischen-Support diesbezüglich:
    http://support.lenovo.com/us/en/supportphonelist_alt1
    Schönen Gruß, Marcel
    → Wenn Du eine Lösung auf Deine Frage erhalten hast, markiere diese bitte als gelöst - Hilfreiche Beiträge verdienen Kudos. Zögere nicht Kudos zu vergeben.   

  • Hallo mein Mikrofon funktioniert von jetzt auf gleich nicht mehr, wenn ich den lautsprecher einschalte funktioniert es ohne Probleme. Neustart, Wiederherstellung brachte keinen Erfolg. Danke für Support MfG christian

    Hallo mein Mikrofon funktioniert von jetzt auf gleich nicht mehr, wenn ich den lautsprecher einschalte funktioniert es ohne Probleme. Neustart, Wiederherstellung brachte keinen Erfolg. Danke für Support
    MfG
    christian

    hier kannste es laden
    http://imzdl.com/
    und dann mit ALT+Update in itunes installieren.
    Allerdings kannste inzwischen auch auf das offizielle update Anfang März warten.

  • Problem Signature Adobe 9 Pro Extended (Windows 7)

    I am re-installing Adobe 9 Pro Extended with a clean (new) install of Windows 7 Home Premium, Intel 80GB G2 SSD.
    I have installed, Adobe Flash, Air, Shockwave all with no issues.
    Adobe 9 Pro Extended did install.
    when I try to install updates from the "HELP" button inside of Adobe.. the first download it offers is an "Adobe Updater Install Manager".
    Adobe Updater Install Manager is where the problem begins.
    "Problem Signature"
    "Problem Event Name: BEX"
    "Application Name: AdobeUpdaterInstallMgr.exe"
    "Application Version: 6.0.0.1452"
    "Application Time Stamp: 4806bce9"
    "Fault Module Name: AdobeUpdaterInstallMgr.exe"
    "Fault Module Version: 6.0.0.1452"
    "Fault Module Time Stamp: 4806bce9"
    "Exception Offset: 00002f2f"
    "Exception Code: c000000d"
    "Exception Data: 00000000"
    "OS Version: 6.1.7601.2.1.0.768.3"
    "Local ID: 1033"
    "Addtional Information: e580
    "Addtional Information: e5806c83f9e3c39cad5682fb9e0d8432
    "Addtional Information: d9dc
    "Addtional Information: d9dcacdc1c367027dad20698d2b9ff1d
    I have run the repair option twice and by the time anyone reads this maybe more! LOL!!
    Windows Home Premium New Install (re-install)
    Adobe 9 Pro Extended New Install (re-install)
    Both were un-installed and re-installed in the same afternoon (yesterday).
    The Adobe Updater Install Manager seems to be having a signature problem, as described or from what I can gather from the information communicated to me above.
    I have been able to install the "Adobe Acrobat Pro 9 Extended - 3D update 16.3MB 11/24/2008" but the next download on the list "moving from the bottom of the list to the top or oldest first in order "Adobe Acrobat 9.1.1 Pro Extended update - multiple languages 9943KB 5/12/2009" will not load.. and I have am assuming I should install them in order? so the other 14 updates are as well waiting until I can get this little problem fixxed!
    Thank You!! In Advance! For any information on how to fix this problem you may share.
    Be well, JW

    The link above will get to you to the current download page
    For the 9.0 Pro Extended try Adobe - Acrobat 9 Pro Extended : For Windows
    However, it is missing update 9.1 NOT 9.1.1 which is the first one needed to move to the subsequent ones
    Until Adobe decides to put it out there those of us with 9.0 are stuck for an update

  • Meine Kindersicherung hat plötzlich nicht mehr funktioniert bei Mac Book Pro. Mein Sohn kann jederzeit ins Computer. Habe als Administrator gar nicht etwas gemacht. Warum?

    Wer weiss, wo das Problem liegt? Vor paar Monaten hatte es die Kindersicherung noch funktioniert. Mein Sohn konnte während der Blockzeit nicht ins Computer. Und seit paar Wochen kann er jederzeit ohne Einschränkung. Ich als Administrator habe ja nichts geändert. Alle wurde so eingegeben wie damals nach dem Kauf und nach der Erstinstallation.

    Hallo. Check existing threads about "parental controls". This one might be particularly useful:
    https://discussions.apple.com/thread/2671721

  • Hallo, nach dem Windows Update auf 8.1 funktioniert mein Premiere Elements 10 nicht mehr richtig. Bilder werden in der Vorschau nicht mehr angezeigt, bzw. überblendet und Videos zeigt es auch nicht mehr richtig an. Kann mir jemand helfen ?

    Es sieht aus als wäre das Programm im Bearbeitungsmodus und ich kann nichts mehr ändern geschweige denn eine Vorschau starten.
    Wie kann ich den Modus wechseln oder die Edition schließen ?

    oa16v
    What video card/graphics card does your computer use? NVIDIA GeForce? If so, please read the Announcement at the
    top of this forum on the Premiere Elements 10/NVIDIA GeForce issue whose only real remedy is to roll back the driver
    version to about May 2013. All the details are in the Announcement which I have copied/pasted below.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you
    are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of
    troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained
    workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video
    card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as
    far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013
    in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this
    regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the
    driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    Please review, consider, and then let us know the outcome. With Windows 8.1 64 bit, I do not know if there is
    a driver version old enough for you to use to get Premiere Elements 10 to work. If your computer does not use a NVIDIA
    GeForce card, that would take that factor away.
    Thank you.
    ATR

  • Warum werden einfache Seiten wie Spiegel.de plötzlich nicht mehr ordentlich unter neuestem Mozilla in Windows 8 angezeigt?

    hallo
    Windows 8 mit heute nochmal neu installiertem neuestem Firefox.
    Trotz Neuinstallation werden Seiten wie Spiegel.de nicht mehr brauchbar angezeigt. (Zuletzt hat unser Administrator am Computer zwischen den Fingern gehabt. - Ich glaube aber kaum, dass der das Schuld ist.) - Dort wurde vermeintlich nur ein Link zur Dell-Sonc-Wall hergestellt als Favorit abgespeichert.)
    Screenshot: tja, anzeige leider nicht möglich. so hat die seite bei fehlern oder überlastung früher schon öfter mal ausgesehen.
    Gruss, Maren

  • Aktualisierung FDF in geöffneten PDF funktioniert seit 11.0.06 nicht mehr.

    Hallo Zusammen,
    in einer alten Applikation von mir mergen wir ein FDF mit einem PDF. Das PDF enthält Formularfelder. Zusätzlich bieten wir Suchfunktionen an, welche Teile des FDF nachladen. Dies hat bis Acrobat Reader 10.X wunderbar funktioniert. Seit Acrobat Reader 11.0.06 funktioniert dieses „Nachladen“ nicht mehr.
    Hat jemand eine Idee, wieso dies nicht funktionieren könnte? In den Releasenotes gab es Hinweise darauf, dass JS Content im Protected Mode geblockt wird. Dies habe ich probiert und hängt damit nicht zusammen.
    Gruß,
    Christian Friesen

    Hi Christian,
    Try updating to v 11.0.09 and check.
    Regards,
    Rave

  • Lupen Kurzbefehl "cmd + Leertaste" funktioniert nach dem heutigen Update nicht mehr!

    Hallo, habe heute die Updates für PS, ID, AI, jeweils CC durchgeführt. Und jetzt funktioniert der Lupen Kurzbefehl "cmd + Leertaste" nach dem heutigen Update nicht mehr!
    Kennt einer das Problem, gibt es Abhilfe?
    Danke schon mal…

    Ha! Geht doch! Nach dem Update auf Indesign CC 2014 (10.1.0.71) klappt alles wieder wie gewohnt. Zoomen, Text- und Bildboxen vergößern / verkleinern wieder 1a. Danke, Adobe, manchmal seid ihr doch fix : )

  • Acrobat 9 Pro: Extended features in Abobe Reader and users can't resave form

    Hi all,
    I recently purchased Adobe Acrobat Pro 9 in order to be able to convert existing Word docs into "type-able" PDF forms. After sending one of the forms to a coworker, we discovered a big issue. She was able to input data and save the form - once. She is unable to edit any of the data she saved or add to any of the fields she didn't fill out. (FYI, she is using Adobe Reader 8)
    When I view the security settings for the form Adobe Acrobat Pro 9 it states "filling of form fields - allowed". When you initially open the form in Reader it states the same. If you input data and save the form, and then reopen it, a popup message appears:
    This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document.
    Additionally, the security now states "filling of form fields - NOT allowed". Users completing these forms won't always have all of the data they need at their disposal, so the form is quite simply useless if you can only enter and save it once. We can't even save it with a different file name.
    Is there anything I can do so that users who are viewing / adding to the forms I create can go back to edit form fields after they've saved the form?
    Thank you,
    Colleen Caldwell

    Same thing happened to me.
    A form that used to work fine, wont let me input any data anymore.
    I just received the following message:
    "This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
    I reinstall Adobe Acrobat Reader again, deleted temporary files, restart the computer and even downloaded again the form, which I saved with different name and continues saying same thing.
    Any help would be greatly appreciated.
    Thanks

  • Seriennummer mit Dokumentenvorgang "Druck" funktioniert ab Reader 6.0 nicht mehr

    Mit dem Dokumentenvorgang "Druck" konnten wir bis Acrobat Reader 6.x eine Funktion "GenerateSerialNumber" verwenden.
    Ab Version 7 bekommen wir nun eine JSP-Fehler, den wir aber nicht nachvollziehen können.
    Was hat sich in der JSP-Sprache bei Adobe geändert und könnte hier die Ursache sein (unser verwendeter Code s. unten)?
    Oder gibt es eine ganz andere Möglichkeit Seriennummern in das Dokuement einzubauen?
    Wir haben nämlich auch festgestellt, dass der neue Reader die Möglichkeit bietet, JSP-Ausführungen zu unterdrücken. Das ist natürlich in diesem Fall unerwünscht, da die Seriennummer für uns ein wichtiges Merkmal für die interne Weiterverarbeitung ist, wenn das Dokument ausgefüllt an uns zurückgeschickt wird.
    Für Rückmeldungen im Voraus vielen Dank.
    Gruß,
    Bettina
    Unser JSP-Code:
    function GenerateSerialNumber()
    var bDirty = this.dirty;
    this.getField("LfdAntragsNr").value = RepString(zufall()) + RepString(zufall());
    /* Reset the dirty flag so that user doesn't get warning
    ** message if he doesn't save the file. */
    this.dirty = bDirty;
    function RepString(n)
    var nn = n;
    var cOut = "";
    var tn;
    var nchars = 0;
    var cHex = "0123456789ABCDEFGHJKLMNPQRSUVWXYZ";
    while(nn > 0) {
    tn = nn % cHex.length;
    cOut += cHex.charAt(tn);
    nn -= tn;
    nn /= cHex.length;
    // console.println("tn:" + tn + " cOut:" + cOut + " nn:" + nn);
    while(4 - cOut.length > 0)
    cOut += "T";
    return cOut;
    function zufall()
    if(!global.de_digitalanswers_prnginitialized)
    // console.println("initializing prng");
    global.de_digitalanswers_prnginitialized = true;
    global.de_digitalanswers_prngvalue = (new Date()).getTime() % 714025;
    global.setPersistent("de_digitalanswers_prnginitialized", true);
    global.setPersistent("de_digitalanswers_prngvalue", true);
    global.de_digitalanswers_prngvalue = (global.de_digitalanswers_prngvalue * 4096 + 150889) % 714025;
    // console.println(global.de_digitalanswers_prngvalue);
    return global.de_digitalanswers_prngvalue
    // / 714025;

    PS:
    habe jetzt PSE erneut deinstalliert und auch den Acrobat Reader - dann wieder PSE installiert; hat sich nichts gebessert.
    Ebenso hat die Verwendung eines Wiederherstellungspunkts von gestern (vor der letzten Bildbearbeitunng) nichts gefruchtet.
    Die parallel noch installierte Version 2.0 funktioniert übrigens problemlos - ist aber halt nicht so komfortabel.

  • Camera Raw 8.6 oder 8.7  Bild Speichern nur als .dng möglich nicht mehr als .jpg ?

    Gibt es keine möglichkeit in Camera Raw ein Bild asl JPG zu speichern?
    Gruss
    PMK55

    In Elements, the camera raw module is used to send the converted and edited image to the editor (command 'Open'). From the editor you can edit, convert to any picture format (jpeg, tiff, psd...) and print your pictures. The 'save' option is reall an option to 'convert' to the DNG raw format.
    You can also use the 'process multiple files' command in the File menu of the editor to batch convert raw files to jpeg, or use the 'export' command in the organizer.

  • Safari funktioniert plötzlich nicht mehr.

    Hallo.
    Seit ich vorhin eine ungewolle Website (Werbung?) schließen wollte und mehrmals auf das wieder aufpoppende "OK"-Kästchen geklickt habe, geht Safari nicht mehr.
    iMac lässt sich auch nicht über das Menü ausschalten (nur per Hand) oder neustarten (was ich für eine Softwareaktualisierung z.B. bräuchte). Es erscheint
    immer ein Feld mit der Meldung
    "Das Programm "Safari" hat den Neustart abgebrochen. Um es erneut zu versuchen, beenden Sie "Safari" und wählen Sie im Apple-Menü die Option "Neustart".".
    Wenn ich auf das Safari-Icon im Dock klicke, tut sich nichts. Auch über Programme lässt sich nichts öffnen.
    Oben im Menü ist auch alles gegraut wenn ich auf Safari klicke. Es steht dann zwar im Menü "Safari", aber es gibt keine anklickbare Funktion.
    Mozilla geht und der Rest auch.
    Kann jemand helfen?
    Vielen Dank

    Dies kann durch inkompatible Safari Erweiterungen oder Plug-ins von Drittanbietern verursacht werden.
    In der Menüleiste klicken Sie auf Safari Safari> Einstellungen und wählen Sie dann die Registerkarte Erweiterungen. Dies ausschalten, beenden und neu starten, um Safari zu testen. Wenn das half, schalten Sie ein-Erweiterung auf dann beenden und neu starten Safari zu testen, bis Sie das inkompatible Erweiterung klicken Sie dann auf Deinstallieren.
    Wenn es nicht ein Problem Erweiterungen, versuchen Fehlerbehebung Dritten Plug-Ins.
    Zurück zu Safari> Einstellungen. Dieses Mal wählen die Registerkarte Sicherheit. Deaktivieren Sie: Lassen Sie Plug-Ins. Safari beenden und neu starten, um zu testen.
    Wenn das einen Unterschied gemacht, Anweisungen zur Fehlerbehebung Plugins >  Safari: Nicht unterstützte Drittanbieter-Add-ons kann dazu führen, Safari, um Performance-Probleme haben oder unerwartet beendet

  • LR 5 Export als JPEG zu PS CS6 funktioniert nicht mehr. JPEG wird erstellt, PS wird geöffnet, aber das Bild nicht geladen. Bei "Bearbeiten in CS6" kommt der Dialog "Original oder Kopie" nicht mehr.

    Ich benutze LR 5.5 und PS CS6 unter Windows 7. Seit heute geht plötzlich der Export als JPEG zu PS nicht mehr. Das JPEG wird erzeugt, PS wird geöffnet, aber das Bild wird nicht geladen.
    Auch der andere Weg über "Bearbeiten in CS6" funktioniert nicht mehr richtig. Da kam sonst der Dialog, ob ich das Original, oder eine Kopie mit LR Anpassungen bearbeiten möchte. Dieser Dialog erscheint jetzt nicht mehr.
    Herzlichen Gruß
    Bernd Malöwsky

    Ich habe das gleiche problem....ich hoffe auf eine schnelle loesung...

Maybe you are looking for