9-slice scaling doesn't work with rotation - bug!
I have a simple graphic, a rectangle with 3 rounded corners with 9-slice scaling applied. When I scale it non-proportionally, the round corners keep their shape as expected. BUT if I then rotate it the round corners lose their shape and become ellipticaly distorted! If I rotate first and then scale the same thing happens. WT...??
you're correct.
it doesn't matter whether the scale9Grid is created in the ide or with actionscript.
it's probably been reported because i think that's been a problem for a long time: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Similar Messages
-
[SOLVED] CPU scaling doesn't work with the new kernel
I just updated my kernel to 2.6.16.1-7, but now my CPU scaling doesn't work anymore.
root@vanessa ~# modprobe cpufreq_userspace
root@vanessa ~# modprobe speedstep_centrino
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): Unknown symbol in module, or unknown parameter (see dmesg)
and the last line of dmesg:
speedstep_centrino: Unknown symbol acpi_processor_preregister_performance
Any ideas? Looks like this is an error in the speedstep_centrino module.. bit. As far as I know I hadn't this error with the -6 kernel package..did you anything else except update your kernel version? because the problem isn't gone away here
[cagnulein@cagnulein ~]$ sudo modprobe speedstep_centrino
Password:
FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.16-ARCH/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such device
and powernowd
[cagnulein@cagnulein ~]$ sudo /etc/rc.d/powernowd start
:: Starting Powernowd [BUSY]
powernowd: PowerNow Daemon v0.97, (c) 2003-2006 John Clemens
powernowd: Found 1 scalable unit: -- 1 'CPU' per scalable unit
/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq: No such file or directory
PowerNowd encountered and error and could not start.
Please make sure that:
- You are running a v2.6.7 kernel or later
- That you have sysfs mounted /sys
- That you have the core cpufreq and cpufreq-userspace
modules loaded into your kernel
- That you have the cpufreq driver for your cpu loaded,
(for example: powernow-k7), and that it works. Check
'dmesg' for errors.
If all of the above are true, and you still have problems,
please email the author: [email protected]
[FAIL] -
Form on a SQL Query - doesn't work with SELECT * - bug or feature ?
When I do this,
Create Page -> Page with Component -> Form -> Form on a SQL Query -> SELECT * FROM EMP
I do not get any items displayed and it creates a simple HTML region / page. Do we have to necessarily specify the column names ?
Iam looking at a way to see if any addition of columns in the table does not involve IT intervention in recreating the form.
When we try to create with Form on a SQL Query, then shouldn't it be similar to the Report where the same thing works, if I give SELECT function_returning_columns() from DUAL even then the same thing happens where it creates an ITEM called functions_returning_columns() it creates HTML region
I asked a related question with no answer :-( in
Dynamic Creation of Items in Runtime through Application UIHi Marc,
Thanks. I just tried something like this. Taking the EMP table example, (it doesn't matter which table), I created a region based on a Pl/Sql function returning SQL query
( I selected the vertical report template including nulls to display it like a form ) :
DECLARE
v_sql VARCHAR2(3000) ;
mn_idx NUMBER := 1 ;
BEGIN
v_sql := 'SELECT ' ;
FOR recs IN (SELECT * FROM ALL_TAB_COLUMNS WHERE TABLE_NAME = 'EMP' ORDER BY COLUMN_ID)
LOOP
v_sql := v_sql || 'HTMLDB_ITEM.TEXT(' || mn_idx || ',' ||
recs.column_name || ') ' || recs.column_name || ', ' ;
mn_idx := mn_idx + 1 ;
END LOOP ;
v_sql := SUBSTR(v_sql, 1, LENGTH(v_sql) -2) ;
v_sql := v_sql || ' FROM EMP WHERE EMPNO = 7369 ORDER BY 1 ' ;
RETURN v_sql ;
END ;
This allowed me to do my updates etc.., Then I created a button called 'Apply' and a process called 'update_changes' on button click and defined this:
DECLARE
v_sql varchar2(1000) ;
mn_ctr NUMBER := 1 ;
BEGIN
v_sql := 'BEGIN UPDATE EMP SET ' ;
FOR recs IN (select COLUMN_ID, COLUMN_NAME, DATA_TYPE
from all_tab_columns where table_name = 'EMP'
ORDER BY COLUMN_ID) loop
-- Make changes here if required- this is assuming 9 columns --
v_sql := v_sql || recs.column_name || ' = HTMLDB_APPLICATION.G_F0' || mn_ctr || '(1),' ;
mn_ctr := mn_ctr + 1;
end loop ;
v_sql := substr(v_sql, 1, length(v_sql) - 1) ;
v_sql := v_sql || ' WHERE EMPNO = 7369; END ;' ;
execute immediate (v_sql) ;
END ;
Since this is for example, I didn't include code for Checksum and hardcoded empno = condition and have provision for 9 columns. I made some changes and tried saving it and I was able to do it.
I altered the table to add a column / drop a column and when I relogin, Iam able to see the changes.
Can you tell me if there could be any drawbacks in this approach ?. -
My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!
My MSI KT3-ULTRA2 doesn't work with my CPU cooler!!
I've got an MSI KT3-ULTRA2 mainbord, and I have a NEOLEC VENEZIA TB Cooler. But when I attach my NEOLEC cooler and I start the machine, the machine shuts down within a couple of seconds, and I get nothing to see on my screen. The weird thing is when I turn the PC on, the cooler starts rotating so it can't be broke, but then the pc shuts down i a couple of secs. So pleezze anybody help me!!
The weird thing is that I also have a coolermaster cooler, and that one works fine. But the problem is that this coolermaster is designed for AMD XP 1900+, and I ahve an AMD XP 2200+ that's why I bought the Neolec Venezia TB cooler.
Grtzz
skeletonone easy thing to watch for... see if the heatsink or fan is in contact with any part of the motherboard, like... if it is too big and touches something that normally wouldn't be in contact with a fan or heatsink. If so, it could be shorting it.
-
Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.
you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html -
Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro
Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help
Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you. -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?
What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network. -
My i pod nano first generation doesn't work with windows 8
My i pod nano first generation doesn't work with windows 8
Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H. -
Quicklook doesn't work with .avi files
Hello, i've got a little problem right here on my mac. The thing is that I used to have Snow Leopard as a OS and quicklook used to work great, it opened all the extensions I used to work with. The thing change when I format my HDD and installed a clean copy of Lion OS. Now quicklook works fine as it used to but not any more with .avi files. I remember that this feature was working great on my previous OS, and it's really important for me to find a solution because quicklook is an absolutely amazing feature of our Macs.
I've tryed to download plugins, restoring permissions or even trying it with a guest user, but no success.
Please help me. If you need more info about specs or something i'll be glad to give them to you.
Thank you!!!Also doesn't work with Grapher (.gcx) documents (an Apple format).
-
The Bluetooth on my 2012 Lexus doesn't work with my iPhone 5. My old android worked perfectly with my car. Even the tech specialist at Lexus couldn't get it to work. Lexus said that other iPhone 5s were having the same problem. What is apple doing to fix this?
Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work? -
Satellite M40-129: PCMCIA Card doesn't work with Linux
I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck -
Trying to set up Apple TV with ATT Uverse. I get errors when trying to enter my WiFi password. One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption. If true, does that mean Uverse subscribers cannot use Apple TV?
Spurs63 wrote:
does that mean Uverse subscribers cannot use Apple TV?
No, that's a rather silly conclusion.
There are two options:
stop using the crappy router provided by the ISP.
Physically connect the ATV to the router via Ethernet. -
My cellcom line doesn't work with my iPhone here in Israel, why? Is there any way I can solve this issue?
Please explain.
What does "cellcom line doesn't work with my iPhone" mean?
What are you trying? What is happening?
Where did you buy the iphone?
Any info abnout your issue at all? -
Media Encoder CS4 doesn't work with Premiere (pic related)
Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!) .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.
Maybe you are looking for
-
The question pretty much says it all: the old versions of Firefox used to allow you to select "open" when downloading a file instead of saving it to a directory. I am fully aware that that's what selecting "open" does anyway, but I still like that op
-
Can't update or Restore iPod as "Firmware File could not be found"
When I try and update my iPod Video or even Restore it this error message comes up. http://img95.imageshack.us/img95/1808/errorvh8.jpg Has anyone had this and advise on anything I can do? Thanks Steve
-
How to connect to Digital Camera using JMF?
How to connect to Digital Camera using JMF? Any example? thx
-
ISE failover between PSNs not working
This has never worked for us. We have two Policy Service Nodes. But when the first goes down, clients are not getting authenticated through second. Even when first comes up, clients still don't get authenticated. Reason for this looks to be the absen
-
I often have very many tabs open, and I would like to be able to save that session, and be able to open it whenever I want to work on that stuff again. I end up hitting restore previous session every time I go online, and then open a zillion more tab