9 STD License Issues. How to renew/generate new license or working one?

Hello. I got a message that there was an error in Acrobat 9 STD. So I needed to re-install. After re-installing I cannot access with my License Serial #, which is still under my ADOBE ID. What to do??

It showed Std 9, but not the license? Did you not keep a copy of both the install file and the S/N for future needs? When you spend that much money on a download product, you should always back it up. But if you did not, I guess it is too late. If you registered it, it should be on your My Account at Adobe.com with the list of registered software.

Similar Messages

How to setup a new apple ID when one is already connected to ipod

how to setup a new apple ID when one is already connected to ipod

See:
Frequently Asked Questions About Apple ID
Just what do you want to do?

How can I generate 2 AOs ? ( ONLY ONE ok )

Hello everyone,
I need to generate 2 different square waveform AOs ( both have a 1sec cycle) :
N°1 : 5 ms high and the rest of the time low
N°2 : 14 ms high end the rest of the time low
n°1 and n°2 work fine when generated seperatly. However, the VI I have attached doesn't work when I want to generate both signals at the same time.
(I am using a PCI-6221 card and Labview 8.0)
Would anybody know how I could generated those two signals at the same time?
Any help would be great,
Marc
Attachments:
2 AOs.vi ‏55 KB

Cela n'est malheureusement pas possible avec une seule carte PCI-6221 car - comme indiqué dans le message d'erreur - les deux tâches entrent en conflit puisqu'elles utilisent la même ressource de la carte. Une solution - malheureusement onéreuse - consiste à utiliser deux cartes.
Une deuxième solution pourrait consister à générer l'un des signaux à l'aide d'une autre ressource de la carte (sortie compteur ou numérique). Dans ce cas, la tension de sortie sera limitée à la plage TTL.
Une troisième solution est décrite dans ce document. Elle consiste à utiliser un timing software pour la génération de l'un des deux signaux. Ceci n'est applicable uniquement si l'un des deux signaux ne varie pas trop rapidement et que les exigences au niveau de la précision du timing pour ce signal ne sont pas trop élevées. Selon la précision attendue pour la durée de l'impulsion de 14ms, cela pourrait être une variante.

How to create a new master and working repository

We have a working env - with master and working repositories .
we have solution for this env .
I want ti create a new environment for a new version - and to create new master and working repository from the old environment .
I tried several options but with no success .
Please help me to understand how can this be done ?
Thanks
Tamar

What options have you tried with no success ?
Do you want to selectively release / migrate code from one env to the new one or will a clone of the working environment be sufficient? If you clone - you wont be able to selectively move updates across.

How To Get A New Ipad Because Old One Is Not Working

Hi
Friends I Have Problem In My Ipad Mini And Its Not Working Maybe Problem In Hardware Or Something
And It's Under Warranty Of Apple Now How I Get New Ipad From Apple Because Its Only In Apple Warranty
And In My Country There Is No Any Apple Branch So Can AnyOne Help Me Out ?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

How do i get new imac to work with windows

I'm new to the imac world, how do I get it to work with windows

If you are talking about MS Windows then you need to launch either Boot Camp or run it in Virtualization app such as Parallels or VM Fusion. You also need a valid license of MS Windows.However if that is not what you mean then you must be much more specific. For example:
"I want to share some files between my PC running Windows 7 and my new iMac running 10.9.3, how do I go about that?"

How to add a new custom field to one set of employees within one country?

Hi,
I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
only for one set of employees in US (such as for a employee group or employee sub group).
Other employees should not have this custom field.
All employees in this scenario is for US country only.
Is this possible? Do we need ABAP for this or only IMG will do?
Any details on how to implement this etc..
Thanks for any help.

Thanks for everyone for the responses.
I really liked the decoupling infotype solution.
However, since some work has been done in the old way, I will try to describe the problem in detail.
Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
This new screen 0200 is assigned to 2010 in PM01 transaction.
These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
But, these additional fields are still displayed always for US employees for whom I want to hide.
Did I miss any thing?
I do not want to hard code in ABAP whom to display and who not to.
Is there a IMG way to do this so that I can change the criteria later as we go.
Thanks

How can I make New Tab Homepage work in Firefox 6.0 ?

I just upgraded to Firefox 6 beta and New Tab Homepage stopped working.

Or you can middle-click the toolbar Home button to open the home page(s) in a new tab.

How well does a new Mac Pro work with Adobe Premiere CC 2014

I'm trying to spec out a new Mac Pro so I can edit 4K footage from a RED camera. I currently edit using Premiere CC 2014. I've heard all kinds of bad stories with the new Mac and Premiere and was wondering if anyone has had a good experience. These are the specs I'm looking at for the mac. Thanks in advance.

Those AMD Dxxx and drivers as well as it may take a product cycle for Adobe if they are interested in the 6,1 customer base.
Dual AMD PCIe 7xxx and above even in dual setups, or of course you can throw one or two nVidia GTX 7xx into those silver "oMP" 2009-2012s (the 2008 just lacks good decent PCIe GPU performance with good graphic cards).
Also the way the nMP will 'share' and throttle to limit itself to 450W and its thermal design so that both GPUs and the processor are not both given full reign (they do when running Windows 8.1 natively - 8.1 because that is the "oldest" version supported with drivers and booting via Apple).

How does the get new coef.vi work??

My labview is 7.0 edition.
The vi is In the directory ... \National Instruments\LabVIEW 7.0\vi.lib\analysis\6fits.llb\get new coefficients.vi . It looks like that the vi can give the new coefficients using some matrix solution method. It is very difficult to study on it because it uses the call library function node.
Can someone tell me what method it use to solve the matrix equation? Now I need it to understand the nonlinear fit vi written by Altenbach.
Thanks!!

In other words, what method does the funciton GetNewCoef_head use ???

How To Get A New Midi Keyboard Working On Mac 5G

Hello
i have a new midi keyboard ( Yamaha mx61 ) and an old mac 5g. Iv used a midi drum kit fine ( Yamaha DTX ) just plug in and play with garage ban. However, the keyboard want be found. The USB ( small ) from the keyboard to the USB to the computer , same as the drums and it's pick up as a standard typing keyboard.
Iv tried using the discs given but they won't work as this mac is running on10.4.11. Is there anyway to get it to work in garage band or is this to do with my mac being old.
thanks

Buying an Install Disc is the only way, it an Upgrade rather than an Update in strict terms.
10.4.x to 10.4.11 is an update, 10.4.x to 10.5.x is an upgrade.
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
http://bobskelley.com/2015/01/04/9-reasons-leopard-keeps-power-macs-real-in-2015 /
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard

How to renew my license for Photoshop cs2?

I bought a Photoshop cs2 disk years ago and used to work with it without any problem. However, now the dialog appears saying that I should apply for a new admission to use the license, and , moreover, that I may use a telephone channel. Here, I finally got to a web site for a chat with you. Could you help me how to activate my present license?

Dear Trevor and John,
Thank you for your kind advice. I have realized that cs2 is no longer
supported.
Since my old iBook G10 is also going to be out of date, I will replace it
for a more recent type with appropriate new soft wares. Thank you again for
you assistance.
S.T.
2013/12/1 John Waller <[email protected]>
Re: How to renew my license for Photoshop cs2?
created by John Waller <http://forums.adobe.com/people/John+Waller> in *Photoshop
General Discussion* - View the full discussion<http://forums.adobe.com/message/5888623#5888623

How to Generate New Version of Enhancements done to Std WebDynpro ABAP obj

Hi Experts,
We have enhanced a SAP Std WebDynpro ABAP component (HAP_DOCUMENT_BODY) using Enhancement framework provided by SAP. Multiple enhancements were done on the same component for different requirements. Now, under the Enhancement Implementations folder of this component, you can see 5 enhancements of the component each referring to the 5 different changes done (most of the changes were done to the same view ).
These changes has now been transported to the Quality System. Now, the client wants one of the changes to be removed. I am not sure of the impact of removing, for eg: the 3rd enhancement, on the other changes done as multiple enhancements were done in a mixed manner.
What i want to do is to generate a new version of WebDynpro component on Dev which has all the enhancements done so far using Utilities -> Versions -> Generate new version. Then try to delete the 3rd enhancement folder, so that if something goes wrong, I can always revert to this newly created version on DEV which has all changes available.
Questions:
1) Before that, I would like to know if I can generate versions of the enhancements done of WebDynpro ABAP using enhancement framework by using Utilities -> Versions -> Generate new version ?
2) If yes, I want to generate one version which has all the enhancements done so far using enhancement framework. For doing so, where should i do the click or selection (Is it Std Main Component or is it Enhancements in the enhancements folder-if so, there are 5 of them, and which one??) before i go to Utilities -> Versions -> Generate new version. I am not clear where i should select or keep the cursor selected on before generating a new version?
Please guide with step by step details.
Thanks,

I have moved this post to the HTML5 layouts forum, which is more appropriate.
I am guessing you are using Rh11 as you have a trial copy. I have some instructions for Rh10 and the only difference should be the script used. See the contact page on my site and request those details. Include a link to this thread.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Exchange 2010: How to renew an SSL certificate?

Hi all. I have done some reading but it seems I can't find just a simple step-by-step on how to renew an SSL certificate issued by a 3rd party CA for Exchange 2010. I really don't want to mess this one up by cobbling together partial answers
from various forums and end up omitting something, then being stuck unable to figure out why I broke email while the CEO flips out.
This is a standard GoDaddy 5-domain UCC certificate. There is only one Exchange server, SP3 (I don't think I have Rollup 6 on yet). The existing certificate expires in a month or so.
I have some specific questions but perhaps these would be answered via what I hope will be a step by step instruction set in your reply :) Sorry to appear lazy by asking for the full instructions just that so far no single forum post nor MS TechNet article
has addressed all my concerns, or in some cases information conflicts. So my concerns for example are: can you do a renewal for a certificate before the old one expires? It is actually a renewal, or are you adding a 2nd certificate?
Do you have to do anything in IIS or does EMC or EMS do all that for you?
Thank you.

-->Can you do a renewal for a certificate before the old one expires?
Yes. Normally 3rd party CA allows you to renew certificate before the current one expires.
-->It is actually a renewal, or are you adding a 2nd certificate?
You have to renew the certificate and a new/second certificate will be added to your server certificate store. Please check below for detailed step of Godaddy renewal. http://stevehardie.com/2013/10/how-to-renew-a-godaddy-exchange-2010-ssl-certificate/
-->Do you have to do anything in IIS or does EMC or EMS do all that for you?
You will have to do it from MMC or EMS. No need to do anything from IIS.
Follow the steps below to make your work easy or follow the video in this site site.http://www.netometer.com/video/tutorials/Exchange-2010-how-to-renew-SSL-certificate/
1. Run this command from EMS to generate CSR. You can see the CSR named "newcsr.txt" in C:\CSR
folder
Set-Content -path "C:\CSR\newcsr.txt" -Value (New-ExchangeCertificate -GenerateRequest -KeySize 2048 -SubjectName "c=US, s=WA, l=Bellavue, o=Contoso, cn=commonname.domain.com" -DomainName autodiscover.domain.com -PrivateKeyExportable $True)
2. Renew the certificate from Godaddy (from Godaddy portal) using the new CSR (i.e. newcsr.txt). Download the certificate from Godaddy after renewal.
3. Open Exchange MMC. Go to Server configuration. Right click on the pending request. Click on complete pending request and browse to the newly downloaded certificate. Make sure you have internet when doing this.
4. Assign services using the steps in the below site. Make sure you have selected the new certificate. You will see the thumbprint just before completion http://exchangeserverpro.com/how-to-assign-an-ssl-certificate-to-exchange-server-2010-services/
5.Delete the old one certificate from MMC.
From EMS use this command
Remove-ExchangeCertificate -Thumbprint <old cert thumprint>
You can see the the certificate thumprints using Get-ExchangeCertificate command
MAS. Please dont forget to mark as answer if it helped.

'Renew your subscription' appears when using my CS6 program. How do I get my applications to work?

I canceled my Creative Cloud subscription last year when I chose to purchase a copy of CS6. CS6 worked fine until I went to open up InDesign and a pop-up appeared saying 'Renew your subscription'. I do not wish to renew my Creative Cloud license, and I just want to use my CS6. Any help on how I can get my applications to work? I'm on a Mac, if that helps. Thank-you!

http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Mylenium

9 STD License Issues. How to renew/generate new license or working one?

Similar Messages

Maybe you are looking for