90 min/120 min/ 150 min?
Surely I am missing something.
When I go to Compressor to deal with a movie and go to the popup menu with compression choices I am toally confounded as to which to choose. And I am finding no guidlines in Apple's documents. Where does one go to make informed decisions?
But the overriding confusion is caused by the multiple choices differentiated only by "90 minutes" "120 minutes" or "150 minutes" etc. Can someone please explain to me what they're talking about and why I would choose one over the others?
I'd really appreciate it
alan b
Alan:
Take breath!
On each preset you'll find a short description in the Inspector window:
DVD: Best Quality 90 minutes: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5.
DVD: Best Quality 120 minutes: Fits 120 minutes of video with Dolby Digital at 192 Kbps or 90 minutes with AIFF on a DVD-5.
DVD: Best Quality 150 minutes: Fits up to 150 minutes of video with Dolby Digital audio at 192 Kbps or 120 minutes with AIFF audio on a DVD-5.
The key factor to choose the right preset is the lenght in minutes of video you want to place in your DVD.
If you deep in the Inspector summary for each preset you'll find the difference between them is in the data rate (bitrate: to fit more minutes of video you must use a lower data rate, what means a lower video quality.
I hope it helps !
Alberto
Similar Messages
-
From mac mini 120 Go to mac mini 500 Go ?
How can I transfer all my data from mac mini 120 Go to mac mini 500 Go ?
Hello,
The likely best way would be to put the older one into Target mode...
http://support.apple.com/kb/HT1661
Then use Migration Assistant to migrate all your data & settings over. -
Query goes from 3.5 min to 150 min after switch to 64 bit
I had Oracle 10.1.0.3.0 (32 bit) on Linux running a simple query, once per weekday, accessing tables in DB2 v8 on AIX M/F via Oracle Transparent Gateway (OTG) 9.2. The query took ~ 3.5 minutes to complete.
We have moved to Oracle 10.2.0.1.0 (64 bit) on 64 bit Linux. Now the same query takes ~ 150 min to complete. There are no errors or message I can find that tell me something is wrong. We fired the older 32 bit box back up and ran the query. It completed in 3 min 24 sec.
I suspect a compatibility issue between 64 bit Oracle and the older OTG but I don't even know where to start to look for that. Anyone have a suggestion or a similar tale of woe?Thanks for the tip. I did get to the explain plans for both of these machines and while the order of execution was slightly different on each machine, I did not see where the CPU cost was different or where things were hanging up. I have included the reports for your perusal. The report for each box begins with the machine name, DT09FU04, DT09FU02 respectively:
DT09FU04 - over 3 hours to run
SQL> explain plan into mdm.plan_table
2 for (
3 SELECT
4 sidr_prdcr_id prod_id,
5 agql_latitude latitude,
6 agql_longitude longitude,
7 s.sidr_inspctn_type,
8 insp_last_name,
9 insp_first_name,
10 insp_ph_num,
11 insp_dist,
12 sidr_actl_cmp_date cmpdate,
13 sidr_tst_rslt result,
14 prdr_full_name full_name,
15 prdr_lcl_name lcl_name,
16 prdr_legal_desc legal,
17 agql_smplid cms_id,
18 agql_ft_snd_ratio snd,
19 agql_kt6i_spgv_dy p1_dry,
20 agql_kt6i_spgv_st p1_sat,
21 agql_kt6i_spgv_ap p1_app,
22 agql_kt6i_abs p1_abs,
23 agql_kt6ii_spgv_dy p2_dry,
24 agql_kt6ii_spgv_st p2_sat,
25 agql_kt6ii_spgv_ap p2_app,
26 agql_kt6ii_abs p2_abs,
27 agql_kt6iii_wear wear,
28 agql_rmrks_01 rmk1,
29 agql_rmrks_02 rmk2,
30 agql_rmrks_03 rmk3,
31 agql_rmrks_04 rmk4,
32 agql_rmrks_05 rmk5,
33 sidr_rmrks srmk,
34 sidr_rmrks2 srmk2,
35 sidr_rmrks3 srmk3,
36 sysdate datestamp
37 FROM
38 dtcmspd.t_magql@cmscpms_p q,
39 dtcmspd.t_msidr@cmscpms_p s,
40 dtcmspd.t_mprdr@cmscpms_p p,
41 dtcmspd.t_minsp@cmscpms_p i,
42 dual
43 WHERE
44 q.agql_smplid = s.sidr_smpl_id AND
45 i.insp_id_num = s.sidr_inspctr_id AND
46 p.prdr_prdcr_id = s.sidr_prdcr_id)
47 /
Explained.
SQL> select * from table(dbms_xplan.display);Plan hash value: 2317258752
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | SELECT STATEMENT | | 2000 | 1794K| 213 (2)| 00:00:03 | | |
|* 1 | HASH JOIN | | 2000 | 1794K| 213 (2)| 00:00:03 | | |
| 2 | REMOTE | T_MPRDR | 2000 | 210K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
|* 3 | HASH JOIN | | 2000 | 1583K| 160 (2)| 00:00:02 | | |
|* 4 | HASH JOIN | | 2000 | 603K| 107 (1)| 00:00:02 | | |
| 5 | NESTED LOOPS | | 2000 | 109K| 61 (12)| 00:00:01 | | |
| 6 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | |
| 7 | REMOTE | T_MINSP | 2000 | 109K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
| 8 | REMOTE | T_MSIDR | 2000 | 494K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
| 9 | REMOTE | T_MAGQL | 2000 | 980K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
Predicate Information (identified by operation id):
1 - access("P"."PRDR_PRDCR_ID"="S"."SIDR_PRDCR_ID")
3 - access("Q"."AGQL_SMPLID"="S"."SIDR_SMPL_ID")
4 - access("I"."INSP_ID_NUM"="S"."SIDR_INSPCTR_ID")
Remote SQL Information (identified by operation id):
2 - SELECT "PRDR_PRDCR_ID", "PRDR_FULL_NAME", "PRDR_LCL_NAME", "PRDR_LEGAL_DESC"
FROM "DTCMSPD"."T_MPRDR" (accessing 'CMSCPMS_P.REGRESS.RDBMS.DEV.US.ORACLE.COM' )
7 - SELECT "INSP_ID_NUM", "INSP_LAST_NAME", "INSP_FIRST_NAME", "INSP_PH_NUM",
"INSP_DIST" FROM "DTCMSPD"."T_MINSP" (accessing
'CMSCPMS_P.REGRESS.RDBMS.DEV.US.ORACLE.COM' )
8 - SELECT "SIDR_SMPL_ID", "SIDR_INSPCTR_ID", "SIDR_INSPCTN_TYPE",
"SIDR_PRDCR_ID", "SIDR_ACTL_CMP_DATE", "SIDR_TST_RSLT", "SIDR_RMRKS",
"SIDR_RMRKS2", "SIDR_RMRKS3" FROM "DTCMSPD"."T_MSIDR" (accessing
'CMSCPMS_P.REGRESS.RDBMS.DEV.US.ORACLE.COM' )
9 - SELECT "AGQL_SMPLID", "AGQL_LATITUDE", "AGQL_LONGITUDE",
"AGQL_FT_SND_RATIO", "AGQL_KT6I_SPGV_DY", "AGQL_KT6I_SPGV_ST", "AGQL_KT6I_SPGV_AP",
"AGQL_KT6I_ABS", "AGQL_KT6II_SPGV_DY", "AGQL_KT6II_SPGV_ST", "AGQL_KT6II_SPGV_AP",
"AGQL_KT6II_ABS", "AGQL_KT6III_WEAR", "AGQL_RMRKS_01", "AGQL_RMRKS_02",
"AGQL_RMRKS_03", "AGQL_RMRKS_04", "AGQL_RMRKS_05" FROM "DTCMSPD"."T_MAGQL"
(accessing 'CMSCPMS_P.REGRESS.RDBMS.DEV.US.ORACLE.COM' )
46 rows selected.
DT09FU02 - 3 min. 24 sec.
SQL> explain plan into mdm.plan_table
2 for (
3 SELECT
4 sidr_prdcr_id prod_id,
5 agql_latitude latitude,
6 agql_longitude longitude,
7 s.sidr_inspctn_type,
8 insp_last_name,
9 insp_first_name,
10 insp_ph_num,
11 insp_dist,
12 sidr_actl_cmp_date cmpdate,
13 sidr_tst_rslt result,
14 prdr_full_name full_name,
15 prdr_lcl_name lcl_name,
16 prdr_legal_desc legal,
17 agql_smplid cms_id,
18 agql_ft_snd_ratio snd,
19 agql_kt6i_spgv_dy p1_dry,
20 agql_kt6i_spgv_st p1_sat,
21 agql_kt6i_spgv_ap p1_app,
22 agql_kt6i_abs p1_abs,
23 agql_kt6ii_spgv_dy p2_dry,
24 agql_kt6ii_spgv_st p2_sat,
25 agql_kt6ii_spgv_ap p2_app,
26 agql_kt6ii_abs p2_abs,
27 agql_kt6iii_wear wear,
28 agql_rmrks_01 rmk1,
29 agql_rmrks_02 rmk2,
30 agql_rmrks_03 rmk3,
31 agql_rmrks_04 rmk4,
32 agql_rmrks_05 rmk5,
33 sidr_rmrks srmk,
34 sidr_rmrks2 srmk2,
35 sidr_rmrks3 srmk3,
36 sysdate datestamp
37 FROM
38 dtcmspd.t_magql@cmscpms_p q,
39 dtcmspd.t_msidr@cmscpms_p s,
40 dtcmspd.t_mprdr@cmscpms_p p,
41 dtcmspd.t_minsp@cmscpms_p i,
42 dual
43 WHERE
44 q.agql_smplid = s.sidr_smpl_id AND
45 i.insp_id_num = s.sidr_inspctr_id AND
46 p.prdr_prdcr_id = s.sidr_prdcr_id)
47 /
Explained.
SQL> select * from table(dbms_xplan.display);
Plan hash value: 3130898149
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | SELECT STATEMENT | | 2000 | 695K| 213 (2)| 00:00:03 | | |
|* 1 | HASH JOIN | | 2000 | 695K| 213 (2)| 00:00:03 | | |
| 2 | REMOTE | | 2000 | 195K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
|* 3 | HASH JOIN | | 2000 | 500K| 160 (2)| 00:00:02 | | |
| 4 | REMOTE | | 2000 | 195K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
|* 5 | HASH JOIN | | 2000 | 304K| 107 (1)| 00:00:02 | | |
| 6 | MERGE JOIN CARTESIAN| | 2000 | 109K| 61 (12)| 00:00:01 | | |
| 7 | FAST DUAL | | 1 | | 2 (0)| 00:00:01 | | |
| 8 | REMOTE | | 2000 | 109K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
| 9 | REMOTE | | 2000 | 195K| 52 (0)| 00:00:01 | CMSCP~ | R->S |
Predicate Information (identified by operation id):
1 - access("P"."PRDR_PRDCR_ID"="S"."SIDR_PRDCR_ID")
3 - access("Q"."AGQL_SMPLID"="S"."SIDR_SMPL_ID")
5 - access("I"."INSP_ID_NUM"="S"."SIDR_INSPCTR_ID")23 rows selected. -
Getting Error - Exporting Sequence (FCP 5) using 150 min - Best Quality
Keep getting error trying to export a sequence in Final Cut Pro 5 using Compressor settings DVD 150 min Best Quality. It's exporting the audio files, but not the MPEG2 video file.
The sequence is about 2 hours and 15 minutes.
Any ideas? (FYI: THIS IS FOR A DVD MASTER THAT WILL GET DUPLICATED FOR CONSUMERS)
CJ
310-228-8266I am having the same problem. Did you find a solution?
Thanks -
Connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once
I am trying to connect two external monitors to mini DP(using a mini DP to VGA adapter) and the VGA out at once. Windows recognize both monitors as well. But it dowsn't let me use all three monitors at once(see the below image). In the dropdown, it lists all three monitors. Problem is there are two active displays I can select.
Mavec wrote:
I would like to add a third monitor.
The GPU(s) in your T400 (and most other laptop brands) will support two different displays concurrently. If you want to support more than two different displays concurrently, you will need another GPU external to the T400.
Generally, if you want to use two external displays on a T400 you will nee dto use a docking station.
I have read messages on various fora on this topic and know that there are a number of ways of doing this, but as I have never had a need to do this myself I can't tell you how to go about it.
Cheers,
Bill
I don't work for Lenovo -
I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?
where did you get this phone from
-
How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's), 1 i-pad (mine), 1 i-pad mini (10 year old's), and 1 I-pod touch (11 year old's). I would like to maintain purchase control, but would like to be able to have a separate account ID for each person. Is that possible?
Each email address can only be on one iTunes account, and all purchases are tied to the account that buys them. If you want to have separate iTunes accounts on each then you will need separate email accounts for each iTunes account
-
Using both MDP and Mini DVI on 2009 Mini
Can anyone confirm that you can use both video ports to mirror on the 2009 mini? Or is it an either/or situation?
No-one can confirm it until there is an actual 2009 model mini to test. However, all the evidence so far indicates the new mini will support two displays.
The page at http://www.apple.com/macmini/features.html includes:
There’s nothing quite like seeing your photos and movies on a big, beautiful display. Unless, of course, you add a second. Mac mini comes with both mini-DVI and Mini DisplayPort output ports, so you can connect up to two displays.... -
Do I have to buy two copy's of iWork for my ipad mini and my Mac mini?
Is it possible to just purchase one copy of iWork for use on my iPad mini and my Mac mini?
No. The developer needs to create and maintain the two versions separately.
(87209) -
What does connecting iPad mini to my Mac Mini through Bluetooth do
what does connecting iPad mini to my Mac Mini through Bluetooth do
There is nothing else you can do as regards the Mac. Bluetooth between a Mac and an iOS device works only for tethering so you can share the iOS device's cell connection. Otherwise, Bluetooth in an iPad is for connecting to peripherals such as headsets, in-car systems, and keyboards.
Regards. -
My question is that if I am using Mac and another friend of mine is using Ipad mini and her skpe isnt working and we want to share screens how can we do it through Ichat? Since on facetime screens cant be shared!
Hi,
You can't.
Messages - the replacement for iChat in Mountain Lion and beyond will do Screen Sharing but only to the accounts it did in iChat 5 and 6 (actually it includes iChat 4 as well)
That is to say in earlier version of iChat you could login to AIM and Jabber servers as well as enabling the Bonjour option to chat on your LAN.
All these will do Video and Audio only chats which in turn means they will Screen Share.
At iChat 6 an Yahoo option was added but it can only Text chat (it can't even send Files or Pics)
This means only the Internet able accounts that login in to AIM or to a Jabber server can Video and therefore Screen Share.
The iMessages account will Invoke FaceTime if you use the Video icon during text chat. (I.e. it is not Video inside the app like the AIM or Jabber accounts can do)
NOTE.
AIM includes Apple Issued Apple ID as Valid AIM Screen Names.
Google Mail ID s can be used and Google Talk IDs with Messages as they run a Jabber server.
Facebook allow you to create a Chat ID (Facebook Chat ID) which is also a Jabber server.
9:13 pm Tuesday; June 10, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Active directory intersite replication minimum polling interval is 15 min or 7.5 min ?
in MCITP 70-640 R2 Self-paced training kit , at page 593, we read :
"The minimum polling interval is 15 minutes. With this setting, and using Active Directory’s
default replication configuration, a change made to the directory in one site takes on average
seven and a half minutes to replicate to domain controllers in another site."
i don't underestand which one is true at last ? 15 min or 7.5 min ?
i wonder at my exercises i noticed that replication occured between sites at about that 7.5 min and didn't take 15 min.
if that is 7.5 min , so what is the reason that they wrote 15 min ?at a maximum 15 min.
the so called average is 7,5 min <----- forget this!
remember the following as your rule of thumb: the minimum interval that can be configured is 15 min and the default is 180 min (3 hours). The interval is the max amount of time that needs to pass before the DCs (between sites) initiates inbound replication.
So it will take the period of the interval or less before replications starts
<o:p></o:p>
Cheers,<o:p></o:p>
(HOPEFULLY THIS INFORMATION HELPS YOU!)
Jorge de Almeida Pinto | MVP Identity & Access - Directory Services
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always evaluate/test yourself before using/implementing this!
* DISCLAIMER: http://jorgequestforknowledge.wordpress.com/disclaimer/
################# Jorge's Quest For Knowledge ###############
###### BLOG URL: http://JorgeQuestForKnowledge.wordpress.com/ #####
#### RSS Feed URL: http://jorgequestforknowledge.wordpress.com/feed/ ####
-------------------------------------------------------------------------------------------------------<o:p></o:p>
"john.s2011" wrote in message news:[email protected]...
in MCITP 70-640 R2 Self-paced training kit , at page 593, we read :
"The minimum polling interval is 15 minutes. With this setting, and using Active Directory�??s
default replication configuration, a change made to the directory in one site takes on average
seven and a half minutes to replicate to domain controllers in another site."
i don't underestand which one is true at last ? 15 min or 7.5 min ?
i wonder at my exercises i noticed that replication occured between sites at about that 7.5 min and didn't take 15 min.
if that is 7.5 min , so what is the reason that they wrote 15 min ?
Jorge de Almeida Pinto [MVP-DS] (http://jorgequestforknowledge.wordpress.com/) -
Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
HelpAddendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar? -
Just bought an ipad2 for my wife and d display is not as sharp as mine and it gets warm when in use and mine does not. Mine is 32gb and hers is 16gb
Bunzez-
I agree. Mine is 64gb, and the most warmth I notice seems to be where I was holding it.
The result of excess heat would be that its battery would run down faster than it should. With a full charge, it should run at least eight hours, maybe ten. Someone mentioned that their iPad charge went down ten percent per hour.
The iPad normally stays on all the time, and is put to sleep by pressing the Sleep button. In the sleep mode, it draws extremely low current, so the battery does not run down for many days. With yours in the sleep mode, does it still get hot?
Regardless, I think the display problem is reason enough to take it to the Apple Store Genius. If there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. In the US, <United States>. Outside the US, <http://support.apple.com/kb/ht1434>.
Fred -
I forgot My iPhone 5s passcode and can't remember what can I do because it is lock for 1 min. Then 5 min. Then one hour and I don't know what to do ????
If you forgot the passcode, you'll have to restore it to remove the passcode, as explained here: http://support.apple.com/kb/HT1212. If it is running iOS 7 with Find My iPhone enabled, you'll have to force it into recovery mode in order to restore it, as explained here: http://support.apple.com/kb/ht1808 (or erase it using Find My iPhone on icloud.com).
-
HT4623 whT is the differencebetween ipad mini mac ios with mini ipad without the ios.
What is the difference between apple mini ipad mac ios and mini ipad without mac ios?
The question doesn't make sense. There is no iPad without iOS. If you are talking about an iPad Mini and a Mac Mini, then one is a small tablet while the other is a desktop computer.
iPad Mini
Mac Mini
Maybe you are looking for
-
This Whole Adobe CC Controversy And a Happy User :-0
I'll make this short....I'm reading all the negative about the CC thing and can't help myself wondering if I'm the only one who's absolutely loving Creative Cloud? I guess I'm going to offend many who seem to have (in their minds) some valid reasons
-
I just got the mail program to freez. It is total stoned dead. I am in the process to move our mail server to MS 365. I got good log in to our old and existing mail domain server via iphone mail and ipad mail and web verson of the mail. But the mail
-
Wre54g w/ switch to provide wired access?
My parents live in an area w/ no broadband but the Inn across the street has a T1 w/ wifi and they've worked out an agreement that allows my parents to use the wifi. They've been using a WRE54G to expand the signal in their house since they are on th
-
My photosmart 6520 will not print a PDF file.
My photosmart 6520 will not print a PDF file
-
How can see the effect of synchronized keyword
hi I read the follwoing code in some books: class W{ static private int count=0; public String name; int no; private static synchronized int addW(){ return ++count; } public W(){ no= addW(); } }but I think that synchronized keyword in this code d