[915 Series] Advise for a DDR2 to 915G!

Since MSI's staff cant help me with my last memory i wass thinking if someone can recommend a DDR2 memory that works in a 915G combo series.
If i get this one to put at 533 will i have problems? My 915G just reconize PC4300!
CORSAIR VALUESELECT 1GB (2 x 512MB) 240-Pin DDR2 SDRAM Unbuffered DDR2 667 (PC2 5300) System Memory - Retail $138.00
or this one
pqi 1GB (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 533 (PC2 4200) Unbuffered Dual Channel Kit System Memory Model PQI24200-1GDB - Retail
Will this run at 533, at least?
Dont know why MSI's people dont test PQI, OCZ, Geil, Mushkin.... etc
http://www.msi.com.tw/html/products/mainboard/testreport_pdf/7058G/memory.pdf
Many thankx

I DONOT KNOW WHY PEOPLE WILL NOT CREATE A SIG/LIST YOUR HARDWARE !
without knowing what you have we cannot know what you need !
its like - I OWN A ANTIQUE MOTOR CAR ! WHAT SHOULD I BUY TO RESTORE IT 100 %

Similar Messages

[915 Series] sata II and DDR2 higher than pc4200...2 questions.

Can i put sata2 on my MSI 915 G COMBO ?
What's the differenc betwin pc4200 (533) and pc4300 (533)? Looks like the 4300 is a ddr 538!???
If i try a memory higher than PC4200(533) on the same MB(915g) it will reconize it as a 533 or 400?
cheers

Quote
Can i put sata2 on my MSI 915 G COMBO ?
SATA2 is supposed to be backwards compatible.
Quote
What's the differenc betwin pc4200 (533) and pc4300 (533)
A typo?
Quote
If i try a memory higher than PC4200(533) on the same MB(915g) it will reconize it as a 533 or 400?
It might run it at 533, but as the natural FSB for that board is 800, the probable (and desired) result is it will run at 400, leaving lot's of room for overclocking at a 1:1 ratio.

[915 Series] Speedfan for 915 chipset

Hi
Can anyone help me with settings for a 915 chipset using speedfan to try to manage system fans?
Cheers

chattam, Speedfan doesn't talk with 915 chipset, it talks with the fan controller or hardware monitor chip on your board. You got to play with Speedfan on your system, experiment everything out and you will find the best settings for your system.

[915 Series] Motherboard Suggestion Request (P4 840 D)

I am looking for any recomendation on a motherboard. I am looking at purchasing the Intel P4 840D processor and I want to know what MB would be a good one. I would like to find one with AGP as my video card is AGP, or would it be best to eat the card and upgrade to PCI-Express?
Any suggestions would be appreciated. (Also is SATA backward compatible to IDE so I can re-use my IDE HDD?)

Don't pick up any 915 series boards for P4 840D. You should pick 945, 955 and 975X boards instead. Go for Intel chipset boards, don't go for NForce4's as yours is a Pentium D.
Do you have a 550W power supply?
SATA is not compatible with IDE. For IDE, you must plug into an IDE port, you can't plug to a SATA port. But the good thing is, you don't need any driver for SATA.
You must go for PCIe card as these boards only support PCIe.

[915 Series] No Audio

Wheres the sound driver for my 915 Series mobo? Thanks..

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=67&NAME=Socket%20775%20(Intel%20P4)
Select your board and the select the driver link.

Dunning letters and automatic remittance advise for suppliers

Hi Friends,
Can any one please provide a document for setting up dunning letters and Automatic Remittance advise for suppliers process in R12
Thanks in Advance.

Hi Chery,
Thanks for your update, Yes I have reviewed the note
I am stuck with How to create the xdodelivery.cfg file per Oracle XML Publisher Administration
Also can you please let me know the process of sending dunning letters automatically to the customers, As there is no standard process. I know we have to customize the process by creating bursting program and add to the request set, but I am nor aware of the process. I have seup the process till running the IEX: Send Dunnings for Delinquent Customers programm and displaying the reminders of the customers which have setup in the XML publisher
Can you please let me know how to send dunning letters automatically to the customers
Regards
Vasu

Creation of series group for suncontracting challan

Hi
While doing a subcontracting challan using J1IF01 , An error comes series group 101 is not maintained. How can i maintain a series rtoup for subcontracting purpose?
regards
B Shar

Dear B Shar,
You can maintain your series group 101 in path
IMG - (Logistics - General) - Tax on Goods Movements - India - Basic Settings - Maintain Series Groups.
I hope this can answer your problem.
Regards
Gunawan

How to read ZIP files(having PDFs,Image) using MQ Series link for R/3

Hi,
1)Is it possible to transfer a zip file (having an image or pdf) using IDocs in SAP 4.6C using MQ Series link for R/?
Scenario: "MQ Series link for R/3" converts Business-Reports from a third-party software,into SAP IDocs.Each Business-Report contains one XML file and one ZIP file.
2)Being on ABAP side,do I have to worry about how the zip file would be converted into IDocs?
Detailed descrption:
This scenario requires integration of a non-SAP software which talks in XML with SAP R/3(4.6C).The customer has decided to go with 'MQ Series link for R/3' (which integrates any non-SAP application running on IBM MQ Series to R/3,by converting data(in any format) into IDocs).He is not ready to go for XI.
The Problem area is a functionality which requires the non-SAP software to send XML file along with an attached Zip file.So,XML document,basically,has a 'zippedFile' XML element having actual file in XML keyword 'file'.
This XML document ideally, should be converted by the subsystem(MQSeries link for R/3) into IDocs i.e. into a stream which could be stored in a table on R/3 side and later, sent back to the non-SAP software through MQ Series link to be converted into zip-file again with corresponding pdfs,images.I want someone who has worked in a similar scenario to confirm this.

Hi,
I have a feeling I have posted this question in the wrong forum or maybe I will let you decide this.Any help would be appreciated (even the right forum name).
My scenario requires integration of a non-SAP software which talks in XML with SAP R/3(4.6C).The customer has decided to go with 'MQ Series link for R/3' (which integrates any non-SAP application running on IBM MQ Series to R/3,by converting data(in any format) into IDocs).He is not ready to go for XI.
The Problem area is a functionality which requires the non-SAP software to send XML file along with an attached Zip file.So,XML document,basically,has a 'zippedFile' XML element having actual file in XML keyword 'file'.
This XML document ideally, should be converted by the subsystem(MQSeries link for R/3) into IDocs i.e. into a stream which could be stored in a table on R/3 side and later, sent back to the non-SAP software through MQ Series link to be converted into zip-file again with corresponding pdfs,images.I wanted someone who has worked in a similar scenario to confirm this.

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Payment advise for manual check payment

Hi,
Client wants payment advise for manual check payment.
He wants:
Reference field, Invoice date, Invoice amount, TDS deduction, Service tax deduction,WCT deduction, Amount paid
The above fields should be appeared in layout
So Could anybody please provide the logic.
Thanks,
Sai

Hi Sai,
You wil need the help of ABAP programmer to write the program for this.
Reference field, Invoice date, Invoice amount, TDS deduction, Service tax deduction,WCT deduction, Amount paid, All these fields can be picked up from BSIK,BKPF & BSEG Tables.
The Logic is to develop a Z program which will pick up for each document posted, based on Document Number and Date the data for each of the above mentioned fields from the given tables and create a Payment Advice Form on whch he will print the data.
Thank You.

In general how is T series performance for data warehousing databases ~1 TB

Hi,
I am planning to use a Sun T3-2 for a data warehouse app. Oracle 11g around a 1 TB worth of data and batch jobs and ~ 200 concurrent users.
We are using HP UX Superdome server now ( node partition of 8 physical CPU's 750 Mhz ).
I know that the T series servers are good for highly multi threaded application. Can I consider the database 11g as a highly multithreaded app ?
How about the batch jobs which run long SQL jobs, I don't think those can be considered multithreaded.
Anyone is using these T series srevers for databases around a TB size ?
Please suggest.
Thanks ..

The T3-2 can do much more work then the old Superdome, but the T3-2 won't run single threaded queires significantly faster then the old Superdome, it will just be able to run about 100x more of them.
If you care most about price/performance look at the X4800 or X4450 servers.
If you care most about availablity and performance look at the M4000/M5000 servers
My experience with coolthreads servers for Oracle DB is be 100% sure what you're doing isn't single thread dependent before deploying.

Purpose of Manual Payment Advise for Customers

Hi
What is the use of Manual Payment Advise for Customers, generated through FBE1
Regards
Rupal

Hi Sai,
You wil need the help of ABAP programmer to write the program for this.
Reference field, Invoice date, Invoice amount, TDS deduction, Service tax deduction,WCT deduction, Amount paid, All these fields can be picked up from BSIK,BKPF & BSEG Tables.
The Logic is to develop a Z program which will pick up for each document posted, based on Document Number and Date the data for each of the above mentioned fields from the given tables and create a Payment Advice Form on whch he will print the data.
Thank You.

Hi I need a series number for iWork's.

Hi
I need a series number for iworks I try to save and print things out but it says i must have this number and it says it will be send by e-mail.

iWork is a set of chargable softwares. If you have run out of the trail period, you should purchase a serial number. A good news is that you can now purchase it in the APP Store for Mac. It's much more convenient.
But before you do that, remember to delete the trail version on you computer first.
Good luck!

Is it advisable for Content Server & Trex to be on the same server?

Hi All,
Is it advisable for the SAP Content Server & Trex to be installed on the same server?
Any feedback would be appreciated.
Kr,
Neil

Dear Neil,
If you are actually implementeing this architecture at clients place, then it should be implemented even if client insist.
I was also in same situation. But I strongly apposed this requirement.
If you want to used this Architechture for trail purpose or demo where you dont have option of having the luxury of hardware.
Then you can try such thing.
With Warm Regards
Mangesh Pande

Problem in creating time series objects for a planning area

Hi Friends,
I am working on SCM 4.0 APO. I am trying to create the time series objects for a 'Z'planning area which i have created. This Planning area is linked to a planning object structure which contains only three characteristics 9amatnr,9alocno & zplnpart. But the creation of time series objects is taking a long time. the screen just remains the same.
Can anybody encountered such a problem any time?
request you all to put some light as what could be wrong or causing the delay in creating them???
All helpfull answers will be suitably rewarded.
Thanks
mvd

Hi mv d,
I have a couple of questions:
1) how many Key Figures does your planning area have?
2) what is the length of your time series horizon?
3) how many characteristic combinations are currently in the Planning Object Structure? and how many newly character
I am asking because these aspects might affect the running time of the time series creation. Have you also tried creating the time series in the background? How long did it take there?

[915 Series] Advise for a DDR2 to 915G!

Similar Messages

Maybe you are looking for