915G combo blank screen & LED indicator show 3 red & 1 green..

Hello every1..
HelP me!!!!!!!
my 915G combo show nothing on my monitor when i turn on. All the CPU & fun are running but show nothing on monitor. LED indicator show red for 3 pin and only a top right corner of pin show green signal. What could i do ?
what does the meaning of 4 LED indicator ? Please help me.
here is my system configuration..
MSI 915G combo Motherboard
LGA 775 , 3.2GHz Intel CPU 540
256*2 MB of DDR400 RAM
200GB Seagate 7200.9 SATA
LG GSA4160B DVD writer
Philips 17" LCD screen

Quote from: devilangel on 20-November-06, 17:22:17
thank you, BOSSKILLER, tonite , i will try
and 1 more question , why my computer always got this problem ,
it happened twice a years,
WHY ah, izzit this board not good enough.
Anyways , thousand thank you again for you help BossKiller.
you are welcome mate.
well suggest you to read Moan Guide and to explain better what problem you got in a new thread. keep us updated.

Similar Messages

Z10 - blank screen + led flashing red

On connecting my new Z10 with BBlink, was given a an option for available upgrades. On upgrading the screen went blank and LED flashes red - 3 short 2 long - blank and starts the sequence again. Am unable to restore, restart or anything. Help wanted please email.
Solved!
Go to Solution.

Glad, that you were able to resolve the problem, Hopefully future releases of the BB link would work better with Mac's..

Curve 9300 staring at me with a blank screen - message indicator blinking

Hi All,
This morning for some unknown reason my 9300 screen went blank, with message indicator light is flashing in a fixed pattern.
I have removed the battery several times for longer than a minute. As soon as I re-insert the battery the indicator light begins flashing in a fixed pattern, but the device will not boot.
I'm assuming the light may be some error code that is significant, but who knows!!
Anyway, is there a method of doing a hard reset (over and above removing the battery)? Or is all hope lost and time to contact the service provider?
Thanks
Paul

Hi and Welcome to the Forums!
There are indeed meanings to the fixed pattern of the LED...see this:
KB18223Charging behavior of the BlackBerry smartphone
Hopefully the pattern you have matches one of those and you will then know how to proceed.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

IPhoto 9.6 is not playing my slideshows properly. Some of the photos show as thumbnails, but appear as a blank screen in the show

Since upgrading my computer, I have fixed the loss of sound links to my slideshows. Now I find that some photos within the shows are just appearing as a blank screen although their thumbnails show in the slide show. One or two have had a message about the photo being edited in an earlier version of iphoto, and suggest that I create a duplicate photo to re-edit. Considering the hours that went into creating these slideshows, redoing them is NOT an option.Very disappointed that iPhoto can't run its earlier work. All slideshows have photos from only one photo upload per show, yet it seems that only part of the show's photos are affected.

Give this a try (be sure to follow the circled recommendation in the screenshot):
Do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.
3 - if necessary repeat with Option #1, Repair Permissions.

After upgrading to 6.1.3 battery drains fast. Moreover initial charging takes more time to change battery indicator from red to green. any solution ?

After updating the iphone 5 to IOS 6.1.3 battery drains fast. Also it takes more time to change battery status from Red to Green. Any solution?

Anyone?
Thinking I'm S.O.L at this point.

T61 screen went ballistic, now red and green.

i upgraded my t61 from xp pro to 7pro. read all the articles and i do mean read on the lenovo and external sites. i installed all the updates and the device manager was perfect with no problems. there were originally some, but from the lenovo community i was able to fix everything.
today i got a crucial m500 ssd with 240gig. i was looking up on u-tube and the lenovo site to make sure i installed the new ssd correctly. just before my last article, the screen went fluky. red lines from top to bottom of screen. i turned off the computer and then restarted (did a hard shut down with power button). the screnn was the same upon start up and the usual start up sound played. i attached a external monitor and the same result.
i read that the nvidia that i have is a problem and possibly the motherboard. i bought this new ( t61 7662-cto) and love it. i would like to keep this unit...it is a work horse. any suggestions.. thank you
i never had a problem before and i am very careful with the unit, not abusive.
Solved!
Go to Solution.

Welcome to the forum!
I'm sorry to say that your T61 is another victim of the infamous "nVidia bug". A replacement motherboard will be required.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

It only shows a blank screen

Hey all. First of all I am still pretty new to flash so forgive me if I make any stupid mistakes.
I am currently working on a portfolio site made in flash. The site itself is good to go, now all that is left is putting it online.
This is where the main problem is. I used flash to publish into both a HTML and a SWF file and linked both of them including all the images and vids that are reffered to in Filezilla.
Now when I open the HTML file it does show my portfolio in an offline browser window like it should, everything works fine etc. But when I try to visit my site, IE only shows a blank screen
whereas FF shows a blank screen and a small thumbnail in the upper left corner telling me to install flash player. I clicked on it, installed the newest version etc but still the same results.
http://www.ruudhommel.nl/
This is the site in question.
Does anyone have any suggestion?

It appears you have misnamed the file, using an uppercase i instead of a lowercase. If I try to link directly to Index.swf I get a no file found error, but if I link directly to index.swf what I imagine is the file in question displays.

Unable to boot laptop, blank screen, even no HP logo is seen

I've a HP G42 laptop with following configuration. 4GB ram, 500gb hdd, 1 gb 5400 ati graphic card, i5 processor. For past few weeks, it was showing a different behaviour: running for few minutes and then dislay got in Not responding mode, after that abnormal shutdown, and couldnt even restart my pc for next few hours. I'm still facing this issue, explained below: When i try to boot then it shows blank screen, it doesnt show HP logo even. But i could listen fan sound, caps lights etc. LED glows white for a while (normal), but later turns into orange, and then not even caps lock LED glows, but fan is still working. I tried many things but couldn't fix. Also tried 'Removed battery, press power button for 30-40sec, and power on throug AC adapter', but couldn't fix. Please help :-( :-(

Hi,
You can follow the steps listed in the below link and could you mention the complete product number & model number of unit.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&tmp_task=solveCategory&cc=us&dlc=en&lc...
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Blank screen orange wifi and mute lights

Hello,
I have a Pavilion Dv4 laptop that does not boot. It seems to be in hibernation with the wifi and wan lights in orange.
I can hear the fan spinning. It spins and then stops and spins again. The DVD light comes on and the numllock and caps locks blink in sequence of 1 continuously.
Please help me! I need my laptop to use.

Hi jendy,
Welcome to the HP Support Forums!
I understand that you are getting no display, but the Caps lock and Num lock LEDs are blinking. I am happy to help you with this. The below document shows the meaning of the error codes.
Blank Screen LED Error Codes
If the lights are flashing just once and then repeating that sequence, it indicates that the CPU is not functional. If that code is correct then I recommend calling the support line. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope that this helps.
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Blank screen Envy 15 despite reset and external monitor

HP Envy 15 J112TX notebook has worked well for a week. Windows 8. The screen is black but can hear the fan going. Hard reset didn't help. External monitor didn't connect - it said to check the video connection. The cord was connected HDMI to DVI. Did another reset. Now i have switched it on and off a few times so that when i switch it on after a minute it will make asmall pop sound and then the fan stops making noise and it won't switch off despite holding dow the power button for a minute.
I disabled the nvidia graphics card a few days ago to try and save on power as it also has an intel graphics card. But it worked fine for a couple of days after i did that.

Hi @salsa7 ,
I understand that you cannot get your HP Envy 15-j112tx Notebook PC will not boot up for you. I will try my best to help you with this issue.
Here is a document for Blank Screen LED Error Codes that may help us determine what is causing this issue.
I hope this helps, please let me know how it goes.
Thank you and have a great day!
I worked on behalf of HP.

Help blank screen. hp625

hi, i got a laptop hp625, when i switch it on the screen is blank, but the power light is on and the capslock button flickers on and off, what is the problem please help fix it...???!!!HP625

Hi hp625mrbanks,
Welcome to the HP forum!
I understand that when you power your computer on, the light is on and the CapsLock blinks, but you have a blank screen.Here is a link to HP Desktop PCs - Computer Starts but Monitor Remains Blank (Windows 8).As you stated you see lights flashing by the CapsLock, I think this will help. Blank Screen LED Error Codes. Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Suse11.2 SAP ERP6 INSTALL import ABAP blank screen

hi ,guys
when i used suse11.2 for sap to install erp6 ehp5 in kvm(like local install) and go to import ABAP step, the KVM suddenlly become blank screen.
ps - ls show sapinst. what is the wrong?

Dear Beny,
This issue happen for less memory.
Check running processes using below command.
ps aux | less
Check sapinst is running or not.
Show All Running Processes in Linux
Thanks & Regards,
V Srinivasan

Blank screen showing battery sign with red line - possible solution

Hi to everybody,
I had a little issue with my Blackberry curve 8350i, but I think this might go with several models. One day my Blacberry updated an application and restarted, but when restarting suddenly I got a blank screen showing a battery sign with a red line. I took out the battery and put it in again, but no luck. I searched on many forums if anyone experienced the same as me. I found a lot of topics but no solution. I called tech support of my service provide and fortunatelly I talked to a tech guy who was willing to help. He said that this error message usually might appear when the battery is faulty, not original (not my case) or device is not working, but before taking a final statement he wanted me to try something first. He said to take out the battery, the SIM card and any extern memory card. Then to clean any contacts with air. I followed his instructions and after that the device worked again without any problems. I would like to share this experience on this forum maybe this will help other to to solve similar issues.
Best regards,
Julix

Excellent advice! I just had the same thing happen to me and your post solution fixed my phone.

When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen show a blank screen with the heading accessing iTunes. If I go to the right side and search the store the names drop down. Nothing happens

When I log into the iTunes store my screen shows the marker go half way across the loading indicator, the screen shows a blank screen with the heading "accessing iTunes". If I go to the right side and search the store the "search names" drop down. Then nothing happens. My iTunes store account info is shown on the right side
I am using a Dell Vostro 3400, with 8 GB RAM, Windows 7 64bit Ultimate OS. ITunes version 10.5? (Latest)
What I have tried:
Uninstalled iTunes,
Removed firewall and protection.
Re-installed iTunes 64bit (still get the same issue)
Restarted firewall, added apple.com etc.
I have created a new user profile to no vail.
Still the same issue. I can access using my iPod

I am having the same problem ever since I upgraded. Have received four emails from Apple support on the
issue and nothing has worked. Unloaded 10.5 and went back to 10.3 which worked fine but it would not allow
me to sync my Iphone with the ios 5 upgrade. Went back to 10.5 and sometimes get exactly what you do when
I try an access the store. It looks like something is clearly missing. Have done just about everything I have seen
on threads but nothing works. Really need help.

Bricked? Red circle/dot LED indicator adjacent to speaker

Wife's iPhone acting up. Warm, tempermental boots/recharges despite repeated resets, and a red indicator shows up that noone seems to recognize: an incomplete circle like "c" with a dot in the middle, perhaps 2mm diam total, illuminated LED apparently, off-screen but on front panel to the immediate left of what I presume is the speaker slot (silver mesh slit at top of screen on face).
Once in a while I can get it to start up (cool in fridge, reset) but on connection with Mac it flakes out again. Contacts appear corroded (cuprous green moss).
Willing to toss/replace but she wants her un-synched data. Rogers won't repair, off-warranty. Arrggh.

Same problem, John -- though my number is 51. Do hope someone out there can be of help!

915G combo blank screen & LED indicator show 3 red & 1 green..

Similar Messages

Maybe you are looking for