915G Combo Video (?) problem

Has anyone encountered this problem where video intensive programs can't be run such as PowerVCR, Dazzle video capture, etc. However, Hauppauge WinTV runs OK but not in full screen. I thought perhaps the integrated video does not have enough memory but installing ATI 128MB pc-express card does not help either. Appreciate if anyone can help. My system is as follows:
EnerMax 350W psu
3 GHZ cpu
2 x 512mb Kingston DDR1
IDE raid using 2x 80 GB Maxtor
Advansys SCSI card with Yamaha CDRW
TEAC DVD-RW
Thanks,
CT

I have installed all the Intel inf and correct graphic drivers. Previously, Hauppauge Win TV would only be quarter size when in full screen mode. I installed the latest drivers and that solved the problem of WinTV running fulll screen. However, problems still existing with PowerVCR and other video editing programs. I get EXception errors and a full list of Hex numbers etc. from PowerVCR and all the DLL files.
After upgrading m/b BIOS to latest 1.60 with my SCSI CDRW unplugged, the CDRW drive is not recognised by XP. My DVDRW is also slow and does not recognise some discs. I'm lost now and have never had these problems before with so many m/bs. Tks.

Similar Messages

[915 Series] 915G-Combo with OCZ-DDR2-533/4200 no post - help!

I was hoping one of you wonderful experts on this board might be able to help. I just bought a pair of OCZ DDR2-RAM and am having trouble getting the system to recognize it. Here are the specs:
RAM specs:
- 533MHz DDR2, unbuffered CL 3-3-3-8
- 1GB (2X512) dual channel optimized gold kit
- 1.8V 240pin DIMM
- 2.2V EVP - OCZ's unique Extended Voltage Protection feature allows PC2-4200 modules to handle voltages up to 2.2V ±5%
- OCZ part number:-OCZ25331024ELDCGE-K
System specs:
* CPU model and rated speed:-Intel Socket775 2.8GHzE
* Not Overclocked
* Motherboard and revision:-MSI 915G-combo
* Motherboard Bios rev:-1.7 (latest)
* Video card:-ATI X800XL
* Power supply:-450W
* Operating System:-XP Pro SP2
My current Crucial DDR-400 PC3200 CT6464Z40B 2x512MB RAM runs without problems installed. When I switched out the Crucial RAM and installed the OCZ DDR2-533 PC4200 RAM in the appropriate DDR2 slots (1 and 3), no go. The system won't even post and I can't get into the BIOS. I tried using even just one of the 512MB sticks, alternated sticks, and even tried just one stick in DDR2 in slot3 instead of slot1 - no go. My boot drives don't get accessed either as I had even placed a Memtest bootdisk in the floppy hoping it might be able to access that.
I've been working over the last 24hrs with the very helpful OCZ folks but we havn't been able to get anywhere. I realize that OCZ isn't technically on the 'tested and verified' DDR2-list for the 915G-combo board, but OCZ is a good name brand (up there with Crucial) and I went for the higher-end Gold-series (CAS3) so I figured it wouldn't be a problem.
I've tried clearing the CMOS (no effect except to wipe out my bios settings). I have a D-Bracket2 installed and it hangs when the upper right light is green with the rest red (according to the D-bracket guide, that means 'Memory Detection Test - will hang if the memory module is damaged or not installed properly'. I can't imagine the RAM is bad - I have 2 matching ones to test (neither seem to work when installed by itself), and just got it brand new from Monarchcomputers yesterday evening in their retail box unopened.
Per OCZ's advice, I was unable to manually set a CAS of 4 with my Crucial DDR installed (I could only manually set it to a max of 3), so I also test-tried a manual set of the BIOS memory timing to 3-4-4-10 while the Crucial DDR RAM was installed and then retried the system with only the new DDR2 installed in their appropriate slots (Crucial DDR of course removed). Still no luck - the system won't get to bios and hangs at the Memory Test per D-Bracket2. It won't even get to a point where it tries to access/boot from floppy so that I can't run MemoryTest from disk.
Would anyone else out there recommend trying something else, short of going out and shelling out $140 for an ABit AA8-925X mboard that OCZ actually lists as compatible with their RAM? My MSI 915G-Combo board has been flawless for me up to now and I'd hate to part with it just because it won't work with good OCZ DDR2 ram. One thing I havn't tried is attempting to use an older BIOS version - I had flashed to the latest v1.7 bios prior to installing the DDR2 ram, so I've never actually tried any of the older versions. Does anyone think this would be worth a shot?
Cheers
- James

Thanks... I tried that.... still no go...
I just got an email from OCZ techsupport (they had requested that I email them directly).
"we have identified a problem with the PC4200 Gold DDR2 dimms, we need to get you a pair with reprogrammed SPD info on them. So we need to swap your kit out"
They were very apologetic about it, and from what I can tell I don't think this happens a lot with OCZ ram...
So that hopefully will be the solution to my problem.. I'm processing an RMA with them right now.. will let you know how it goes.. it's a 'relief' to find out that it most likely isn't my MSI-915G board's fault after all...
Kudos to OCZ at least for getting back to me so quickly, even though it does suck to have my memory delayed again.. I'll post again when I get the replacement RAM and let you all know how it goes... at least they've identified a problem and are willing to take care of it rather than leaving me hanging...

MSI 915G combo no sound or internet

Hi
Motherboard: MSI 915G Combo
For one day ago I decided to format my hard drive.
I installed Windows Xp professional and all drivers.
But when the computer had started up so didnt the sound or the internet work, I've tried to reinstall the drivers to my motherboard, but it didnt work. So are there a problem with my motherboard, or something else?

Have you installed the cmedia audio drivers properly? Get the latest ones from http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=604&kind=1

Need help with video problems

Hi!
Back in May I was having problems with video on my Mac. I was helped by this site and am hoping for more help. I downloaded the realaudio, but was still having problems. I assumed because I was on dial up. It was so slow. It would take forever to load and then play for a few minutes then need to load some more. I now have DSL and was looking forward to kissing the video problems good-bye! My new problem is that when I try to watch or listen to anything like innertube it "stutters." Is there something else I should be doing? How can I fix this problem?

With those specs you should be absolutely fine. I would suggest that you update to 10.4.10 at least (download the full Combo updater). Once you are on that:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. This: http://www.macworld.co.uk/news/index.cfm?email&NewsID=19845 may also interest you.)
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
See also the very informative post from QuickTimeKirk dated Dec 3, 2007 in this thread: http://discussions.apple.com/thread.jspa?threadID=1268489&tstart=0
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them).
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz.
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

915G Combo Unable to install Azalia Driver in Windows 2000

System:
P4 Processor 520 2.8GHz (LGA775)
Kingston DDR400 512MB (one stick)
915G combo
Powercolor Radeon X300
Lite-On DVD writer SOHW-1653S02C
Maxtor 80GB SATA
C-Media Azalia Audio Drivers cannot be install in windows 2000(Format, new OS). Got the error message hardware was not detected. Already install the Busdriver according in C-media Azalia Driver, sound is OK (2.0 speaker). but cannot install the Azalia driver. I afraid if something might goes wrong in the future if there's no proper driver.
Have no problem with the driver when installing WindowsXP (SP2 direcX9.0c included), but I want to use windows 2000 instead.

I have only install SP3 and SP4 for windows 2000, but haven't update anything as that place got no Internet connection.
I didn't check what DirectX version was included with Win2k SP4, so I'll try to run windows update after this.
Which chipset driver are you mentioning, the Motherboard chipset? If that the case, I already install all the other driver in the MSI Driver CD but stuck at Azalia driver.
I am wondering, is it OK NOT to install Cmedia audio driver? As installing the BusDriver (included in Cmedia driver), sound is OK but I don't want it will arise conflict in the future.

Video Problems- Playing Games - World of warcraft also other games

Right after I updated 10.5.7
I started having Video problems-- pixellation-- Flashing -- and others
I tried to reload 10.5.7, The Combo version this time. and it still happened
I need Help.
WoW worked fin e before I updated to 10.5.7 now it is painful
my computer information:
Model Name: Power Mac G5
Model Identifier: PowerMac7,3
Processor Name: PowerPC G5 (2.2)
Processor Speed: 2 GHz
Number Of CPUs: 2
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.8f7
Serial Number (system): RM446GY0QPM
ATI Radeon 9600 XT:
Chipset Model: ATY,RV360
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4152
Revision ID: 0x0000
ROM Revision: 113-A13602-121
Displays:
Cinema HD Display:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display Connector:
Status: No Display Connected
ATI Radeon 9600 XT:
Chipset Model: ATY,RV360
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4152
Revision ID: 0x0000
ROM Revision: 113-A13602-121
Displays:
Cinema HD Display:
Resolution: 1920 x 1200
Depth: 32-Bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported

Downgrade:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

How setup XP with 915G Combo

machine specification:
MSI 915G Combo
hardisk = Maxtor 6 L040J2
DVD = Samsung DVD-Rom SD-616F
RAM = 2 x 256MB Kingston KVR400X64C3A/256
CPU = Intel Pentium 4 530 3GHz 88Mhz FSB 1MB L2 Cache LGA775
Power supply = 450W/P4/12CM Fan
This is my first time with MSI, and first time to setup my new computer by my own... but, i have facing many problems...
i am having problem to install Windows XP Pro SP1, always stop half way with a blue screen that warn me about the demage of harddrive...
now i have Windows 98 SE in my new computer, but since the VGA not support for Win98, i dun want to stay with WIN98.
then, i try to move another hard drive with XP Pro SP1 into this motherboard, but, it do not auto detect the WinXP...
then i try out with the Win98 hard drive, it can detected and start with Win98.
p/s: when i enter BIOS setting, my IDE Primary Master = [Not Detected], but i can see my DVD-rom in IDE Third Master...
anybody can give me suggestion and guideline about this???

Quote
First you will need to install using the F6 key, to install the specific drivers that come with the mobo.
This shoul'nt be nesserearly with ich6, as it has support for native s-ate and p-ata.
First of all, you should never try to start youre MB with a HD from another system, unless it's identical as yours. If you do that, you must do a repair of XP(press 'E' after you have answered yes to the licence agreement) er format the disc and do a clean install.
Also, how big is youre disk?
Try updating the bios.
I agree with ArcAiN6, check youre cables and jumpers. If that does'nt help, here is link to MaxtorFAQ that might help.
Good luck

915G combo blank screen & LED indicator show 3 red & 1 green..

Hello every1..
HelP me!!!!!!!
my 915G combo show nothing on my monitor when i turn on. All the CPU & fun are running but show nothing on monitor. LED indicator show red for 3 pin and only a top right corner of pin show green signal. What could i do ?
what does the meaning of 4 LED indicator ? Please help me.
here is my system configuration..
MSI 915G combo Motherboard
LGA 775 , 3.2GHz Intel CPU 540
256*2 MB of DDR400 RAM
200GB Seagate 7200.9 SATA
LG GSA4160B DVD writer
Philips 17" LCD screen

Quote from: devilangel on 20-November-06, 17:22:17
thank you, BOSSKILLER, tonite , i will try
and 1 more question , why my computer always got this problem ,
it happened twice a years,
WHY ah, izzit this board not good enough.
Anyways , thousand thank you again for you help BossKiller.
you are welcome mate.
well suggest you to read Moan Guide and to explain better what problem you got in a new thread. keep us updated.

915G Combo And Double-Wide Card...

Hello everyone,
Question for you all:
I have a 915G Combo motherboard with an X800XT video card, but want to upgrade to the X1900XTX. However, the X1900XTX is classed as a 'double-wide' card. Is the 915G able to acccomodate it?
Regards,
Thor

Naw, a Pentium-D does not necessarily mean better 3D performance.
Remember a lot of games out there are written to take advantage of a single core only. There are only a handful of games out there right now that takes advantage of two CPU cores. At high resolutions, it's usually the graphics card that's the bottleneck, especially if you are using forced antialiasing or anisotropic filtering. FSAA and AF are independent of the CPU, and they take a lot of graphics card power.
I wouldn't get the 1900XTX for a different reason... It takes too much electrical power, runs too hot and makes too much noise. I prefer the new 90nm Nvidia 7900GT, which uses just 85W of power at peak and dissipates around that much heat. Works wonderfully with the rig in my sig.
As far as double-wide graphics cards go, it just means you lose the use of the slot next to your graphics card because it's taken up by the graphics card cooler. I don't see any reason why it won't work on a 915G board.

Mini DVI to VGA Adapter Video Problem

This year at Randolph-Macon College we replaced the Math lab Emac computers with IMac G5 Intel machines. The laboratory has an NEC model MT1050 projector with a manufacturer’s date of August 2002. We can not seem to get rid of ever present scan lines. We can slow them down and speed them up by adjusting resolution and refresh rates, but nothing will remove them. We are connecting the IMac to the projector via the Apple Mini-DVI to VGA Adapter. It is specifically designed for use with the iMac (Intel Core Duo), and the adapter connects to the Mini-DVI port of the computer and the VGA end of the adapter to an external VGA monitor or projector.
Troubleshooting the problem we have swapped IMac Intel computers with no luck, but we still have to use the Apple Mini-DVI to VGA Adapter. When we hook the projector to a Intel Mac Book Pro, we have to use a different adapter, but then it works perfectly. In fact, everything we try using other adapters works fine, it’s just when we use the Apple Mini-DVI to VGA Adapter that we experience the video problem.
Has anyone experienced this problem and if so, have you been able to remedy it?
iMac (Intel Core Duo) Mac OS X (10.4.8)

I don't have much to suggest, except to ask if you can try with a different mini-DVI to VGA adapter. (i.e. do you have more than one on hand to make sure yours isn't just defective?) Make sure it is firmly seated into the iMac.
I use the same adapter to provide an extended desktop on an old CRT monitor and the display is great.

T400 - Video problems and a long wait for repair...

Hi,
I'd just like to state my experience with Lenovo Customer Support for a video problem with my T400. Bottom line, as of today, it's been around 27 business days that it's been with Lenovo, and 41 days total since it's failed on me, and nobody, including Lenovo Customer Support, seems to know what its status is exactly, except that they're waiting on a part which has no ETA.
In July 2009, I bought a T400, a 2764CTO version with the switchable graphics between the internal intel graphics and the ATI GPU.
All was well until February 1st, 2010, when the LCD sudden wouldn't work. Well, it would work, but the screen was very very dim, even with the display maxed out on brightness. You would have literally bring your nose to the screen in order to even make out any text or images - definitely unusable. However, if you hooked up an external monitor via the video output, the T400 would display video output properly that way. When I did this, I noticed that the switchable graphics option wasn't there any more - couldn't switch to the ATI GPU. Based on this, I figured it must be a video card or LCD issue, or a combination of both.
So, I called Lenovo Customer Support (CS) at 1-800-565-3344, since I'm up here in Canada, and I initially was issued a case number of 41JRFSD, and I agreed to send it to a local Lenovo Repair Centre. Oops, my bad, I made a mistake using the locator tool I was told to use at bplocator.lenovo.com, and thought the Centre was relatively close. Not quite. So, I called Lenovo CS again, and they issued me with a new case number, 40KWSYF, and said they'd send a box for return to depot. And within 2 days, Feb 2nd or 3rd, I got a Purolator courier return box. That's fast service! Pleased, I put my T400 in according to instructions, and I sent it off.
Fast forward to about mid-February. I called Lenovo CS, and apparently there was a delay - the depot needed a part that wasn't in stock. Fine, I know these things can happen - I'll wait.
Fast forward to March 1st. I talk to a Lenovo CS rep, and it appears that the part needed has arrived, and they've put a rush order to get the computer back to me. Great!
Fast forward to March 8th, still no computer. I talk to another Lenovo CS rep... strange, there's no update. The issue gets escalated to the Depot managers.
Fast forward to March 12th. Still no word on my T400's status. An email fron CS has been sent to the depot. Not even the CS reps know what's going on. The rep I talk to figures there should be a response by the end of the day.
Fast forward to today, March 13th, 4:50pm Pacific Time. I just finish talking to Lenovo CS, there's been no response from the depot. Apparently there's a part that they're waiting on for repairs, but there's no ETA on it. Is it the same part that I've waiting on all this time? Is it a new one? I don't know.
At this point, I've been told to send an email explaining my situation, and I've also been told to talk to Scott the next time I call CS on Monday after 3pm Eastern. I have to stress that the Lenovo Customer Support Reps I've talked to have all been very sympathetic and have been courteous, helpful, and professional - something I appreciate from having worked in Customer Support myself. But the bottom line remains: my computer's not back to me.
So, my questions to the community here: is my experience here typical? Is there any hope of my seeing my computer back, or even at least just the hard drive? I've used Lenovo computers for work for the past 7 years, and it was my good work experiences that led me to buying a Lenovo for home use. However, it's been a while since I've been without my T400, and I was hoping to get my taxes done on the computer too, since they're due at the end of March. I'll reserve judgement on Lenovo until I get my computer back, but at this point, all I can say is... I'm disappointed.
If you're reading this, I'll let you judge my experience for youself. I'll update my case as it progresses.
Thanks!
Moderator edit: Removed support contact private information, per the Community Rules.

Hi all,
So, an update with some good news: my computer is finally back!
After a total of over 40 business days (just over 2 months) I finally have my T400 back at home, working again!
According to the spec sheets, the repair depot had to replace: the systemboard/planar, display/LCD panel, LCD cable, PC card, bluetooth, and the inverter. BIOS/Embedded controller was also updated, along with the regular diagnostics to ensure everything was working properly.
I give Lenovo credit though: they got the final parts to repair the computer on Monday, April 5th, and shipped my computer back to me for the next day (today, April 6th). That's fast service, once repaired!
However, my case spans over 4 screens of updates and repair depot orders of parts.
Also, it took me over 10 calls to Lenovo's Customer Service, plus an escalation to a higher-level manager after 1 month had passed, to get progress updates and ETAs for repair.
Lenovo called me only once to give me an update, and that was the manager whom my issue was escalated to: all the other times, I called Lenovo for an update.
The story doesn't end here, however:
In talking to Customer Support, they told me that Sales might be able to sell me an extended warranty at a discount, given the issues I had. And indeed, after talking to Sales, they offered me a 1 year warranty extension at a price of just over $100 CDN, plus tax. This is a sale price, compared to the regular retail of $129. Unfortunately, they can't sell me just one month.
At this point, I refused their offer, and again escalated to a manager to request an extension of exactly 1 month on my existing warranty. I figure 1 month delay in repairs, that's plausible - crap happens, and while most repairs take 5-10 business days, I can understand it can sometimes go higher. Two months though.... My request for a warranty extension is being considered by the manager it was escalated to.
So, one last question for you folks reading this: am I being unreasonable, talking to Lenovo support one more time to request a 1 month extension of my warranty, given the length of time it's taken for repairs? I'll post the response Lenovo will give me tomorrow, as they've said they'll do.
One thing for sure: Lenovo's response will definitely influence my choice of brand from whom to buy a new computer (and it will influence the choice of my friends who've heard my issues, and maybe yours too). My particular repair problem may not come up often, but if it does happen to you, I'd be happy to know of your experience.
Thanks for sticking with me through the drama!

Premiere Pro CS6 importing/ audio and video problems

I recently recorded gameplay from my xbox, when i open this recording using windows media player it states that the video is 3 hours 30 minutes long, which is correct, when i then import this into premiere pro, premiere pro changes it to be 5 hours and 44 minutes long, when i then play this back it plays in slow motion and audio and video start to desync, i thought it may just be the source editor playing up so i made a clip and put it into the timeline and it still had the same outcome. The speed/duration are still on 100% so im not sure what to do, anyone have any idea as to what this is, or why it is happening?

What are the attributes of your PVR video...
specifically, is it variable frame rate?
Media file evaluation utilities:
GSpot
http://www.headbands.com/gspot/
MediaInfo
http://mediainfo.sourceforge.net/en
If it is VFR, Premiere no-likey.
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

Why does a Safe Boot fix my video problem?

After visiting my local Genius Bar twice (and getting two different answers), I erased and reinstalled Snow Leopard 10.6 on my late-2006 "white plastic" iMac.
I reinstalled the version of SL that came with the iMac, then upgraded it twice to OS 10.6.8. Software Updater says all of my OS components are up-to-date.
My video-corruption problems ("ghosting", "tearing", pixelation of icon, then the kernel CRASHES within 20 minutes) appear when I boot normally. But they permanently disappear when I reboot into the Safe Mode!
I've search Apple.com and every other site I can find without a clear answer to this:
What extensions, StartUp items, software daemons or gremlins DO NOT load in Safe Mode? Shouldn't one of them be the cause of my problem? Or does Safe Boot work on a hardware-level, too?
This happens on ALL accounts, both Admin and regular users. No external devices are connected except the wired mouse and wired keyboard.
I've zapped the PRAM three times, and I've unplugged it for hours. Disk Utility shows everything is good, too. There's about 50 gigs left on the internal 750 GB hard drive.
The so-called "Geniuses" both ran their Triage OS off an external drive and my iMac hardware passed ALL of their tests. One said it just needed a reinstall (a free fix!!), and the other said my video card is bad ($800, and I have to use an outside repair shop).
Can someone give me an idea how to proceed? I've been working in Safe Mode for days, but that prevents me from using: Sound, my home network, fonts, Preview, editing in iPhoto, etc.
Thanks.
Specs:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Purchase Date: March 2007

Hi, Mike,
Thanks for the quick reply.
I read the linked post about QE, but I don't see how it could help me troubleshoot my problem. Could you clarify: is QE a piece of "software" (that is, a file -- like an extension)?
If QE IS a piece of software that is disabled in a Safe Boot, I should be able to move it to my Desktop and restart. If my video problem is eliminated, the QE software is the problem, right?
But then, if my problem is caused by a file/extension, why would the problem occur (and be eliminated in a Safe Boot) right after I re-installed the OS? Shouldn't all the System software be pristine right after re-installation? But since it's NOT fixed by the re-installation, it seems like a hardware problem -- like the expensive video card. That's what's confusing me.
So, I'm proceeding as if the problem is caused by a file being loaded into memory and I'm trying to disable the items that don't load in Safe Boot Mode one-at-a-time. I just need a specific list of what those items are (and their locations on my hard drive).
In OS/9, I used Conflict Catcher to do this automatically, but I haven't found an OSX app to do the same. So I'm trying to do it manually.
Please excuse my layman's terms. Any help is appreciated.

Weird video problems with Mobility Radeon HD 4200

Recently pacman upgraded the video drivers for my video card:
[2011-04-17 12:48] upgraded xf86-input-acecad (1.4.0-4 -> 1.4.99_git20110318-1)
[2011-04-17 12:48] upgraded xf86-input-aiptek (1.3.1-2 -> 1.3.99_git20110318-1)
[2011-04-17 12:49] upgraded xf86-input-evdev (2.6.0-2 -> 2.6.0-3)
[2011-04-17 12:49] upgraded xf86-input-joystick (1.5.0-5 -> 1.5.99_git20110318-1)
[2011-04-17 12:49] upgraded xf86-input-keyboard (1.6.0-1 -> 1.6.0-2)
[2011-04-17 12:49] upgraded xf86-input-mouse (1.7.0-1 -> 1.7.0-2)
[2011-04-17 12:49] upgraded xf86-input-synaptics (1.4.0-1 -> 1.4.0-2)
[2011-04-17 12:49] upgraded xf86-input-vmmouse (12.7.0-1 -> 12.7.0-2)
[2011-04-17 12:49] upgraded xf86-input-void (1.3.1-1 -> 1.3.1.99_git20110318-1)
[2011-04-17 12:49] upgraded xf86-video-ati (6.14.0-2 -> 6.14.1-1)
[2011-04-17 12:49] upgraded xf86-video-vesa (2.3.0-4 -> 2.3.0-5)
[2011-04-17 12:49] upgraded xkeyboard-config (2.1-1 -> 2.2.1-1)
[2011-04-17 12:49] upgraded xorg-server-common (1.9.4.901-1 -> 1.10.1-1)
[2011-04-17 12:49] upgraded xorg-server (1.9.4.901-1 -> 1.10.1-1)
[2011-04-17 12:49] upgraded xvidcore (1.3.0-1 -> 1.3.1-1)
and now my video sometimes is glitchy. the output looks like this:
Also the computer crashes sometimes when I view a flash video in full screen or when I come back to the screen saver.
I think this has to do with the new video drivers but I'd like to know how I can fix the problem.
I don't know what other logs to provide as I'm pretty new (using arch for a 9 months) and I haven't had video problems before.
Last edited by sansar (2011-04-23 19:50:21)

I just noticed that the video card crashes after i come back from sleep mode.
Here's the kernel log: http://pastebin.ca/2050145
and the Xorg.log: http://pastebin.ca/2050146
For this crash, unlike the one that happens when I view a flash video full screen, the problem can be fixed if i log off and log back on.

ITunes / Quicktime Video Problems With Windows VISTA

I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
PC Pentium 4 Other OS Windows Vista Home Premium

I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

915G Combo Video (?) problem

Similar Messages

Maybe you are looking for