915GM Speedster-FA4 - ICH6 or ICH6R which one?
Hi
I recently purchased 915GM Speedster-FA4 based setup. I was planning to set it up with raid0 and lived in impression that this motherboad has built in support for it (ICH6R). Manual states that MB is equipped with "optional ICH6R" southbridge, but there isn't any kind of mention how to enable it. There are also whole section about setting up the raid. But of course document starts with enabling raid in BIOS and at least my version (v1.13) doesn't have any options to do this.
So the question is, does this motherboard have raid support or not, and if there is how to enable it?
Thanks
Antti
Hi
I recently purchased 915GM Speedster-FA4 based setup. I was planning to set it up with raid0 and lived in impression that this motherboad has built in support for it (ICH6R). Manual states that MB is equipped with "optional ICH6R" southbridge, but there isn't any kind of mention how to enable it. There are also whole section about setting up the raid. But of course document starts with enabling raid in BIOS and at least my version (v1.13) doesn't have any options to do this.
So the question is, does this motherboard have raid support or not, and if there is how to enable it?
Thanks
Antti
Similar Messages
-
I've plan to purchase MSI 915GM Speedster-FA4 and combine it with my Pentium M 755 (479pin).
I searched the web for best price, but I found two different specification for CPU socket, one is Socket 478 and the other is Socket 479. Which one is correct info? ???Actually the pentium M comes in socket 479, but according to intels site they do come in 2 different types Micro FCPGA & FCBGA.
and according to the sSpec# there is a 479pin version of the newer ones.
the 1.86 comes in both of the ways below - so make sure you get the SL7S9 if you were choosing between them.
SL7SR 1.86 GHz 533 MHz 90 nm C0 2 MB 479 pin
SL7S9 1.86 GHz 533 MHz 90 nm C0 2 MB 478 pin
here are other sSpec# from the intel site.
SL7VB 2.26 GHz 533 MHz 90 nm C0 2 MB 478 pin
SL7SP 2.13 GHz 533 MHz 90 nm C0 2 MB 479 pin
SL7SL 2.13 GHz 533 MHz 90 nm C0 2 MB 478 pin
SL7UZ 2.10 GHz 400 MHz 90 nm B1 2 MB 479 pin
SL7V3 2.10 GHz 400 MHz 90 nm B1 2 MB 478 pin
SL7EM 2 GHz 400 MHz 90 nm B1 2 MB 478 pin
SL7SM 2 GHz 533 MHz 90 nm C0 2 MB 478 pin
SL7SQ 2 GHz 533 MHz 90 nm C0 2 MB 479 pin
SL7SR 1.86 GHz 533 MHz 90 nm C0 2 MB 479 pin
SL7S9 1.86 GHz 533 MHz 90 nm C0 2 MB 478 pin
SL7EN 1.80 GHz 400 MHz 90 nm B1 2 MB 478 pin
SL7SA 1.73 GHz 533 MHz 90 nm C0 2 MB 478 pin
SL7S8 1.73 GHz 533 MHz 90 nm C0 2 MB 479 pin
SL6N5 1.70 GHz 400 MHz 0.13 micron B1 1 MB 478 pin
SL6N9 1.70 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL7EP 1.70 GHz 400 MHz 90 nm B1 2 MB 478 pin
SL6FA 1.60 GHz 400 MHz 0.13 micron B1 1 MB 478 pin
SL6F7 1.60 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL86G 1.60 GHz 533 MHz 90 nm C0 2 MB 478 pin
SL86M 1.60 GHz 533 MHz 90 nm C0 2 MB 479 pin
SL7EG 1.60 GHz 400 MHz 90 nm B1 2 MB 478 pin
SL8QF 1.60 GHz 400 MHz 90 nm C0 2 MB 479 pin
SL6F6 1.50 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL6F9 1.50 GHz 400 MHz 0.13 micron B1 1 MB 478 pin
SL7GL 1.50 GHz 400 MHz 90 nm B1 2 MB 478 pin
SL6F8 1.40 GHz 400 MHz 0.13 micron B1 1 MB 478 pin
SL6F5 1.40 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL7F3 1.40 GHz 400 MHz 90 nm B1 2 MB 479 pin
SL6N4 1.30 GHz 400 MHz 0.13 micron B1 1 MB 478 pin
SL6N8 1.30 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL6NB 1.20 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL6NC 1.10 GHz 400 MHz 0.13 micron B1 1 MB 479 pin
SL7F4 1.10 GHz 400 MHz 90 nm B1 2 MB 479 pin
SL6NJ 900 MHz 400 MHz 0.13 micron B1 1 MB 479 pin -
915GM Speedster-FA4 Help needed.
I have tried to put together a system based on the 915GM Speedster-FA4 motherboard.
But it just wont post.
I have installed CPU and memory and PSU, nothing else.
I have tried two different CPUs, both 400Mhz Dothan, one SL8BA and one SL7GL
Can anyone confirm that they are compatible with the 915GM Speedster-FA4 motherboard?
The Jumpers are: J4 (not connected), J5 (2-3 connected), J6 (2-3 connected)
I have tried both DDR1 and DDR2 memories (not at the same time)
Using a 20-pin PSU. I will try to swap PSU, but after that I have run out of ideas
Is it possible to get any diagnostics from this board???
Advice please!
/AndersQuote from: Xanlin on 26-January-07, 18:52:12
I have tried two different CPUs, both 400Mhz Dothan, one SL8BA and one SL7GL
I think they are called 715 and 735A
/Anders -
[Intel] 915GM Speedster FA4
I have flashed the BIOS to the new 1.13 from the site, but still have problems with overclocking and the SATA HDD.
When I go above 165FSB, I no longer have SATA drives visible in the BIOS, and the system tries looking for another boot disk.
Is there anyone out there who has overcome this problem, or is there a newer 'beta' BIOS available to overcome this problem?
Rig:
MSI 915GM Speedster FA4
Pentium-M 730
512Mb DDR2 @ 533mhz
Samsung SP2014N through Highpoint Rockethead
OB graphics
OB sound
WinTV Nova-T TV Card
Philips 16x DVD-RW
Logitech S510 KB/Mouse/RemoteNo news yet. Maybe you should try visiting the main webpage, they will make annoucements for the official launch dates.
-
915GM Speedster-FA4 - works with DDR2 667MHz?
Hi folks,
first of all: sorry for my English - hope you'll understand me
I've bought a 915GM Speedster-FA4, I will run a P-M 750 on it.
Now I'm looking for RAM.
DDR2 400MHz / 533 MHz is supported by the board, but will also 667 MHz RAM run?
(manufacturer will be Corsair, model: value-ram DDR2 667 MHz)
I don't have any experience with DDR2 - but e.g. in many
boards with DDR 333MHz support I ran 400 MHz without any problems.
Thanks a lot!"DDR2 400MHz / 533 MHz is supported by the board, but will also 667 MHz RAM run?"
should be not a problem, board should accept 667Mhz stick(s) or higher rated and will run it as 400 or 533. if you using 2 memory sticks ensure they are same brand & specification. -
915GM Speedster-FA4 , banias CPU support
Does the MSI 915GM Speedster-FA4 motherboard support Pentium M Banias CPU?
I think that Celeron M (100MHz FSB series) are similar to Pentium M Banias, but to be confirmed.Dothan is newer than Banias. ... so I'm not sure...
-
i have not purchased this motherboard but i am buying a new pcie card and i dont want to upgrade my current Pentium 4 (socket 478) to a new one and this was the ONLY s478 pci express motherboard that i could find. So i am wondering if my P4 will work with it because under supported processors it says " Supports Intel® Pentium® M Dothan/Celeron® M Dothan processors in 478-pin package ". Does that include my processor? And also the only place i could find this board sold ONLY the board and not the driver cds and cable etc so when i tried to find a driver download i was unsuccessful as well so if someone could point me in the right direction i would really appreciate it. Thanks
DomQuote
...so basically, this board will NOT work with my processor?...
You are correct, your proc is not supported.
Quote
...Where can i get a board that does i have looked everywhere. Thanks for the reply.
Here are the boards that support P4 478 procs, none of which support PCI-e. I am not aware of any PCI-e board that supports P4 478 procs. -
Tips overclocking 915GM speedster-FA4
Intel
hai there,
this mobo is a good one even they're not the best on the oc.
i manage to run @ 166mhz with sacrifice the onboard ich 6 r and replace it with a pci sil 3112 and did it even with a 180mhz oc but hiks hiks hiks my proc need a higher voltage than the standard 1.35 and this mobo wouldn't let me change the vcore(hiks hiks hiks). i hope with the new bios i can change the vcore(pleaseeeee).Yes it´s an interesting MoBo, ( I´ve been thinking about it for my P-M 730 cpu), however mATX "server"-boards does not normally have all OC settings like ordinary desktop boards.
What bios are you running at the moment ? Latest 1.13 have an OC fix ;
Version 1.13 Update date 2005-9-16
Update Description 1. Fixed bug that may not Over Clock with SATA drive
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=615&kind=3
And like Wangmonkey said, if you need more help then please write a complete system-sig.
Bios update requests is handled by MSI support
http://support.msi.com.tw/?language=eng -
HELP!!!!! 915GM Speedster-FA4 PCIe x1 slot not working - SORTED
Hi, I am at my whit’s end with this motherboard, I cannot get the PCIe x1 slot to work. When I use the PCIe x16 slot it recognises the option card OK but the x1 slot will just not see it.
I know the network socket 1 needs to active for the PCIe x1 slot to work.
Any help would be appreciated.
SORTED - IRQ clash with the onboard boot ROM for Lan socket 2 - NOT DOCUMENTED - MSI PLEASE TAKE NOTESorry there is no MSI in here....
It seems that nobody used that config to be able to help.
And no, I'm not from MSI either -
[915 Series] Intel Pentium M 915gm Speedster FA4 (MS-9625) MATX PCI-E Dothan
Does anyone know when this board will be available to purchase? Or any additional info on it?
http://www.bit-tech.net/news/2005/06/03/msi_pentium-m_i915
http://www.gamedev.net/community/forums/viewreply.asp?ID=2084153
http://www.xtremesystems.org/forums/showthread.php?t=68415No news yet. Maybe you should try visiting the main webpage, they will make annoucements for the official launch dates.
-
How are you supposed to get help from Apple if you don't know what your serial number is? They say to input the serial number of the "product" that you are asking about. Since my problem is how to deauthorize/authorize computers, and they are saying I have more than 5 (which I have never owned more than 5 computers in my life), I can't imagine what serial number they mean. Does it mean your desktop computer? If so, which one? Do they mean your device? LIke your iPhone, iPod or whatever? Do they mean the software ON one of your computers and/or devices? If so, which program, and on which computer/device?
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. I only know of 2 computers that have iTunes on them, so how can there be 5? We also have 2 iPhones and 2 iPods in this family, but one of the iPhones has his own apple id. He may have been using mine, since his computer died. I read that those don't count as "computers" to the 5. Do they, then?
Help! I can't contact apple because I have no idea what they mean about serial number. I doubt they would help me anyway. In order to get the serial number off my desktop computer (that has iTunes on it already), I will have to move furniture, so I don't want to if that's not it. Is there some way to find the serial number in the software, either on my desktop or my iPhone?sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matt:
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<HR></BLOCKQUOTE>
I think 6.2 is easier, just follow read me instruction, on redhat 7.0 you must run patch to downgrade glibc from 2.2 to 2.1
null -
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.
-
So I am new to Muse, and my Adobe Cloud has 2 different programs from Muse... how do I know which one is the newer better version?
One Must program (Muse CC 2014.2) has a black background when working on it... it looks like other Adobe programs such as Photoshop.
The other one is light color (Muse CC) very similar to the black color Muse on functions.....
One of the difference I notice is that the light color Muse has a few widgets in the library, while the black background Muse seems to have an empty library
So... why are there 2 different Muse programs in my Adobe Cloud?Hi
The latest version of Muse is 2014.2, so you need to uninstall another version of Muse manually.
regarding the items in Library, you can add items in your library manually, as shown in this article
Adobe Muse Help | Organizing and reusing design elements using Library panel
Please let me know if you have any other query. -
Difference between Temp table and Variable table and which one is better performance wise?
Hello,
Anyone could you explain What is difference between Temp Table (#, ##) and Variable table (DECLARE @V TABLE (EMP_ID INT)) ?
Which one is recommended to use for better performance?
also Is it possible to create CLUSTER and NONCLUSTER Index on Variable table?
In my case: 1-2 days transactional data are more than 3-4 Millions. I tried using both # and table variable and found table variable is faster.
Is that Table variable using Memory or Disk space?
Thanks Shiven:) If Answer is Helpful, Please VoteCheck following link to see differences b/w TempTable & TableVariable: http://sqlwithmanoj.com/2010/05/15/temporary-tables-vs-table-variables/
TempTables & TableVariables both use memory & tempDB in similar manner, check this blog post: http://sqlwithmanoj.com/2010/07/20/table-variables-are-not-stored-in-memory-but-in-tempdb/
Performance wise if you are dealing with millions of records then TempTable is ideal, as you can create explicit indexes on top of them. But if there are less records then TableVariables are good suited.
On Tables Variable explicit index are not allowed, if you define a PK column, then a Clustered Index will be created automatically.
But it also depends upon specific scenarios you are dealing with , can you share it?
~manoj | email: http://scr.im/m22g
http://sqlwithmanoj.wordpress.com
MCCA 2011 | My FB Page
Maybe you are looking for
-
Where can I buy a wall charger for a third generation iPod Touch?
Does anyone know where I can buy a wall charger for a third generation iPod Touch? I am giving this iPod to my father because I want to buy myself a fifth generation iPod Touch for my birthday. Could I just get an iPhone 3GS or iPhone 4 or 4S wall
-
Fix "Folder Location" in Display
I have a 2011 iMac that I transfered all my files to from a PC. I had to buy Photoshop Elements 8.0 in order to transfer my catalogue of 10,000 images with all the tags and albums etc into the Organizer for the mac. I understand that once images ar
-
Hi SAP Gurus, My client has a requirement to pay advances to customers. I found that F-29 can be used only to receive downpayments and that F-48 can be used only for vendors. Am I correct so far? One option is to use F-21 and F-30 for this process bu
-
C3-00 v4.60 not able to sync to OVI
I have WIFI at home (and several other places) but not a data plan through my cell provider. In WIFI areas I've been able to set up OVI email and eventually also get the communications app to connect to my gmail account (after dozens of attempts). I
-
same as above