915p Combo and Leadtek Winfast PVR2000 - No Sound on live playback

Has anyone attempted to install a (PCI card) PVR2000 onto a 915p Combo board and utilise the onboard sound rather than a dedicated Sound Card? I've attached the PVR card to the motherboard via the CD-In connector (JAUD1 or something), but only get sound when playing back captured TV or Radio. This suggests that the card is working, but the motherboard can't hear it through the connector. I've tried replacing the cable with one that definitely works and updated the Leadtek and Onboard Sound drivers, but to no avail.
Can anyone help?
Thanks!

Download the latest drivers for the C-Media soundchip, PVR2000 and the latest version of WinFast PVR. After that go to the Configuration Screen in Winfast and select CD-Player for Audio-in &Audio-out. In Cmedia Xear->Mixer select CD-Player in Rec and click the button that looks likea speaker (a hammer in earlier versions and select Monitoring).

Similar Messages

  • "915P Combo and PCI-Express problem"

    Hello friends, I have a pc with the following configuration: mobo 915P Combo with a processor pentium 4 530 3.0 ghz, memory kingston 1GB Kit DDR 400 dual channel, psu 500w ATX with connector 20-pin, video card XFX Geforce 6600 256 MB PCI-EXPRESS, sound card audigy 2 zs, hard disk 120 GB seagate 7200 rpm SATA. And I have a problem with the port PCI-Express and my video card, if I install the video card the computer it doesn't start up well, that is to say, it start up and to the 3 seg this shut down automatically    and 5 seg later this tries to start up but without success  , after several intents this can start up perfect and everything works well  . And if I don't install the video card pci-express and I intall my old video card port pci 16 mb Banshee the pc starts up perfect and doesn't have problems.  what is the real problem?    1) the video card pci-express, 2) the port pci-express of the mobo, 3)that I have a psu with connector 20-pin? Thanks

    dear moderator,
    i got same problem as Calvido. My system specification MSI 915G Combo with the lastest bios v1.8 with a processor pentium 4 530 3.0 ghz, memory kingston 1GB DDR 533 dual channel, psu 350w True power, video card Leadtek Geforce 6600 256 MB PCI-EXPRESS, hard disk 120 GB maxtor 7200 rpm SATA. And I have a problem with the PCI-Express, if i use the intergrated graphic intel 900 it dun give me any problem n i used for more than 6mth.
    It happen when i try to upgrade my intergrated graphic card to PCI-E. 1st i try with the Inno3D geforce 6600 256mb PCI-E n when my com start until windows it become blank screen for awhile the screen appear again for no more than 1 min became blank again. 2nd try i use Leadtek Geforce 6600 256MB PCI-E it seem alright but when i click on icon it start to delay ...until hang. 1st i thought my OS problem so i format my system, but problem still the same so i repeat format until 7 or 8 times. Problem not solve.
    I try to send email to MSI but no reply
    Pls help me to solve the problem
    best regard

  • [915 Series] 915P combo and P4 530j model cpu

    I get 4 red DLEDs at boot attempt. I have bios 1.3.  Do I need an older cpu to boot to flash the bios to 1.7?
    Using a enermax 500 watt noisetaker, 24 pin psu. 2 sticks of Centom 512mb memory, tried just 1 stick... same I have removed all parts but the video and ram. no vid signal, 4 red lights...
    Matt

    Did you make sure you plugged in the 4 pin power into the motherboard? If so try removing the CPU and reseating it.
    Good Luck
    Jeremy

  • [915 Series] 915P Combo Problems.. Can anyone help Please?

    Hello everyone!
    I'm pleasured to be in contact with you, I'm from Portugal, so any errors in my english, please excuse me 
    I've bought an MSI Motherbnoard 915P Combo and there is some questions that I need your help.
    My system is:
    MSI 915P Combo 8latest 1.6 Bios version)
    Pentium 4 LGA775 3.0 GHZ
    Zalman 7700 Al-CU
    1GB Kingston PC3200 2x512 (Dual Channel, 3-3-3-7)
    XFX Geforce Nx 6200 PCI-Express (with direct power alimentation from the PSU.. is this normal?)
    Enermax 350w Noisetaker ATX 2.01 (with all stability since I've bought to my P4 Socket 478)
    160GB Seagate Barracuda SATA NCQw/8MB Cache
    Pioneer DVR-108 16x DVD+RW
    Thermaltake Shark Aluminium Case
    Integrated 5.1 Sound Solution (Azalia)
    Ok... the problem is... my computer doesn't shut Off! I've installed the Windows Xp and SP2 from new, bu when I'm choosing the option "Shut Down" win windows, the pc shutt down only 3 seconds!!!
    By the on/off button is everything ok...
    Can anyone help me?
    Thank's in advance.

    Quote from: NovJoe on 21-March-05, 20:30:51
    Check your power button connector to the mobo and see if it was fixed properly or you can try turning the connector 180 degrees around and fix it in and see if the same problem replicates.
    Next you can also try to clear CMOS.
    Check in your Power Management Options in Windows and check if there's any funny settings.
    Thank you very much NovJoe for your kind attention and help.
    Since I arrive home I'll try that.
    i've  tried the connector of the power in the board of the 2 possible way with no result.
    How can I clear the CMOS? nly with Jumpers isn't?
    And what do you mean to say with funny settings in windos? Can you be more specific please?
    Regards

  • BIOS Problem with 915P Combo

    Hi there...
    I have one MB 915P Combo and i have problems in BIOS configuration.
    I go to: Advanced BIOS Features / BOOT SEQUENCE
    And have one option Boot from other Device, it have No.
    I change to Yes, and reboot and now it is possible to use pen disks.
    The problem:
    If i install a program and at the end of installation (for example update IDE/Raid utility) it is necessary to reboot windows , i restart the windows and when go to windows, now is not possible to use pen disks...
    To solve the problem temporaly:
    It is necessary to go to the BIOS configuration and Change the Boot from other device to "No"  and reboot... and Change again to "Yes" to work with Pen disk.
    And sometimes appears a blue window in Windows with a Device Driver error.
    How to solve the problem ?
    I have the latest BIOS 1.6
    Thanks.

    What if you just normally reboot windows without any new installation? Does it happen the same way?

  • 915P Combo sound card

    I have to 915p combo here is the exact board
    http://www.msicomputer.com/product/p_spec.asp?model=915P_Combo-F&class=mb
    i just wanted to know if the onboard sound card support will allow my to decode dobly digital and dts or do i need to get speakers with a buitl in decoder

    Yes, it supports dolby digital output, bypass via SPDIF. It does have built-in DD decoder and generate 5.1 channels audio analog output.
     1 Line-In/Line-Out/Mic-In/RS Out/CS Out/SPDIF Out-Optica/Coaxial Audio port 
      Audio
      8 Channel Azalia controller integrated in Intel ICH6 Chipset 
    • 8-channel audio codec C-Media 9880L 
    • Compliance with Azalia 1.X spec 
    • Support Multi-Streaming function
    • Support Universal Audio Jack (only Front Audio Jack) 
    Or.. are you looking for Dolby Encoding? meaning convert any source of audio and output as SPDIF in Dolby Digital content?

  • 915P Combo POST problems

    Hi All,
    First i would like to say great site and wonderful info provided. my problem has to do with starting up the computer. When turned on the computer doesn't POST and I have to press the reset few times to get to POST. here is how it goes: When turned on "CPU fan makes throaty sound 'too much for just starting up'". then the mouse + keyboard light check, either lights up indicating a POST in progress or they don't during all of that the monitor is still not POSTING.
    Out of 10 start ups 9 require pressing the reset button 5-10 times to get it to post. could anyone please give some feedback on this problem. Also if it is not too much does anybody know why a computer with a SATA master HD and a Third primary ATA133 HD won't let me add any more drive and will ask for RAID to be installed? having problems connecting my CDRW ROM with 2 HDs and a DVD drive installed i have to manually open the case and unplug the DVD drive and swap it with the CD writer if i want to burn something on CD. Thanks again for the help.
    MSI 915P Combo AMI BIOS v 1.6
    Intel P4 530J  3.0GHz  1MB L2
    2 x 512MB 'Generic' PC4200 DDR2 533MHz Unbuffered
    420W Generic PSU
    RADEON X700 Pro 256MB GDDR3
    1x 80GB S-ATA Maxtor DiamondMax 8MB  Buffer
    1x 60GB ATA133 Maxtor
    2x LG Flatron L1950 LCD
    LG GDR8163 DVD-ROM
    SoundBlaster Audigy2 ZS
    WinXP Pro SP2
    DirectX 9.0c
    MS Wireless Key+Mouse
    ATI Catalyst Suite5.5

    Dude i'm telling you I'm having the exact same problem.......
    after hours of troubleshooting and reading these forums and whatnot I've found out I am not the only one having this problem.....these MSI boards are pieces of  i'd return it if I were you
    this is the response I got from MSI's technical support via email
    Dear Customer,
                            Since have tried a known good power supply then try with board outside of case with minimal components if same have board replaced with reseller if just received if had been working and issue occurred the can rma through us Thanks
    Technical Support Division
    MSI Computer Corp.
    with such good english you can tell that MSI really puts alot of effort into customer support........The guy on the phone was foreign and hard to understand also and he said the same thing....Send it back!
    I'm not getting a replacement either i'm getting an exchange because it is ridiculously evident through the 15-20 posts both here and on the online help section that this model of board is indeed a pile of  and has many similar problems with no real answers.  We got wtfpwnd, cut your losses and send it back

  • [915 Series] 915P Combo installation trouble

    I am attempting to install a 915P Combo board with a Pentium 4 530J 3.0/800/1G processor. At the moment I have only 1 DIMM, the processor, the power supply and the case power switch and speaker connected to the board. The memory, power supply and case are known to function properly. (I experienced the same symptoms with my system fully connected, and the system did not post.) Here is the situation:
    After pressing the power button I hear one long beep and six short beeps. This combination is not listed in the Basic Troubleshooting Guide. When I had the D-LED installed the system hung with the bottom left and top right lights green and the other two orange. This combination is indicated as the processor read indication.
    Any thoughts? Thanks.
    EDIT: the one long beep and six short beeps might be eight short beeps; it's hard to tell. Eight short beeps is listed as indicated a display error, so I tried reinstalling my brand-new PCIx16 card. No luck.

    AMI BIOS (American Megatrends Inc) don't have long beeps, just short beeps.
    in ur case we have
    6 Beeps 8042 - A20 Failure
    8beeps Display memory read/write failure
    So you must install your VGA card in another system.
    AWARD BIOS have long beeps..
    1 long 9 short, BIOS ROM error...
    Just make sure your PSU is ok, Clear the BIOS, and send this mainboard for a check

  • 915P Combo No Raid option please help

    Hi everyone,
    Recently I bought MSI 915P combo FR and 2 S-ATA HD and 1 ATA HD.
    I want to use the two S-ATA HD as Raid but BIOS does not let me select the raid option under IDE/S-ATA configuration. I have tried to clear CMOS and use different BIOS version and checked all connection but nothing helps.
    Any help, advice and suggestion is very welcomed
    Thanks in advance

    Quote
    Originally posted by Guci
    The MB is packed with the software that can be used for SATA Raid configuration and in the manual it is explained how you have to configure your SATA controller as RAID in the BIOS (please download the manual for this mobo and look at chapter 5) as well as in WindowsXP environment.
    Please take a look at page 1-2, under Chipset, u will c this "Serial ATA 150 RAID 0, RAID 1 and Matrix RAID (for ICH6R only)."
    Quote
    Hi Darkslayer,
    It is written at least on the pack that it does support both SATA and IDE RAID and the chip is ICH6 and ICH6R ready.
    I have follow the instruct mentioned but I do not see the RAID option anymore since updating the BIOS
    BTW, maybe u should call up ur local MSI distributor and ask the what the ICH6R ready mean. I wish to know as well

  • 915P Combo not seeing optical drives in WinME- HELP!

    I just purchased a new computer from Cyberpower with an MSI 915P Combo motherboard and no OS installed (though I'm on my old computer now, an 866MHz P3 running WinXP on an IDE HD).  I have a SATA HD installed in the new machine and a DVD-ROM and DVD-RW drive.  I installled WinME only because the WinXP install disk that I have will not run from the DOS prompt I get when booting with a Win98 startup floppy.  It must be run from within Windows.  Upon finishing up my installation of WinME, I received the following message:
    Quote
    "Your multi-function device (Standard Dual PCI Controller) has some child devices using 32-bit drivers and others using compatibility-mode drivers.  This configuration is not supported, so your computer has been halted to prevent corruption.
    After you restart your computer, Windows will use compatibility-mode drivers for each child device attached to this multi-function device.  If you want to use 32-bit drivers, you may be able to obtain an updated driver for the device that caused the problem by contacting your hardware manufactured, or you can disable the device.
    Press any key to continue"
    …and WinME doesn't recognize the DVD-ROM or RW drives (the IDE controllers are not functioning when I go to the device manager- the yellow ! appears).  So my goal is to install WinXP.  Booting from a startup floppy, I AM able to access the DVD-ROM and RW drives, but as I said, I cannot run my XP install CD from a DOS prompt.  Is there a solution for me short of buying a full-install version of XP that will install from a DOS prompt?
    Please, if someone can give a full explanation (I’m pretty good with computers, but I wouldn’t call myself a computer “expert”… though I DO know how to go into the BIOS to make changes, even if I don’t know everything I’m doing there), it would be very much appreciated.  Thank you.

    Thanks to those who wrote and helped me.  I think I'm good for now :-)

  • How do Connect the JAUD on a 915P Combo

    How do Connect the JAUD on a 915P Combo MB
    I have a case with a front panel. The wires are named:
    2 wires "SPK R" (2 connecters on the same wire) Red wire
    2 wires "SPK L" (2 connecters on the same wire) White wire
    1 wire "GND" (Grund) Black wire
    1 wire "M IN" (Microphone) Green wire
    1 wire "M Bias" (Microphone) Blue wire

    not sure ive looked at the main board manual  and my new blower case has the same front audio hook ups but i was not able to locate the connections  useing the mainboard manual that came with my main board im still wondering about how to connect the front audio  my self !  915p combo-fr

  • 915P Combo Windows XP setup problem

    hello all,
    hoping someone can help me with this.  I'm trying to install xp at the moment on a 200gb maxtor hard drive connected to my MSI 915p combo FR by IDE.  i know to hit f6 during setup and then press S to select the raid driver from the floppy but my computer didn't ship with the floppy disk, only a cd with drivers on. does anyone know where i can find the drivers i need (are they on the cd?) that i should have on a floppy or if there is another way around this?  I keep getting a blue screen and the xp setup cannot continue past this point.
    this short thread from another forum explains the problem i have in more detail.
    http://forums.pcper.com/showthread.php?t=449498
    any help in this matter would be greatly appreciated
    thanks

    Hi,
    can you please try to explain what you are trying to do there in more detail?
    Quote
    I'm trying to install xp
    ... does the Install-CD include at least Service Pack II?  If not, please use an SP2 or SP3-Install CD.  If you don't have one, use NLite or XP ISO BUILDER to make one.  The integration is free, legal and easy to do. 
    Quote
    a 200gb maxtor hard drive connected to my MSI 915p combo FR by IDE
    Okay.  So we are looking at an IDE/PATA Drive, right? Not an S-ATA Drive, correct?
    Quote
    i know to hit f6 during setup and then press S to select the raid driver from the floppy but my computer didn't ship with the floppy disk, only a cd with drivers on.
    Actually, you don't need to do that.  You are definately not using RAID anyway if you have just one Hard Drive.  Make sure the hard drive is connected to the IDE Port hosted by the Intel ICH6 Chipset (the IDE Port that stands alone).

  • Audigy 2 NX + Leadtek Winfast DTV Don

    Hello,
    since i have installed drivers of my new sound card for notebook, i have occured problems.
    When i am looking on digital TV, the system is randomly shutting down after 5-30mins with NMI error or driver(probably driver of TV card) error. The problem started when i have installed my sound card drivers. System is 00% stable in other situation, problem is only with TV, can anyone help me pls?

    Are you running latest VGA drivers? I've had a couple of problems with the Leadtek Winfast drivers on my desktop PC - one of the driver versions caused a BSOD when I used my printer - upgrading to a later driver revision resolved this problem for me.
    If you're not already running latest VGA drivers, try updating those, too - http://www.leadtek.com.tw

  • 915P Combo for SATA RAID

    Okay, I just recently purchased a 915 P combo.  I'm trying to setup a SATA raid and I don't have the option.  The bios version is 1.2 and it's southbridge is a intel ICH6R.  When I go into ATA/IDE configuration [Enhanced] I only see IDE and AHCI but no RAID.  I have two 200gig WD hard drives.  I don't know if this means anything either but the post screen says found primary master IDE drive and then says found secondary master ide drive.  I'm not sure if it should say SATA or something else then IDE.  Any help would be greatly appricated.

    I purchased the 915P Combo from NewEgg.com which says:
    "SATA/RAID: 4x SATA, 2x ATA(VT6410) 133 with RAID 0/1/0+1"
    which led me to believe that it could do SATA RAID.  My 915P box even says "SATA RAID - supports SATA and IDE interface RAID 0, 1 or 1.5".  On the front of the box, like someone else mentioned, there is a big sticker that says "Intel ICH6/6R Test OK" which I can understand would not necessarily guarantee it had the 6R.
    Looking closer at the sticker on the side of the mobo box it does say "P4-800, 915P, ICH6, ...." and not "ICH6R", but until reading this thread, I didn't even know what ICH6/ICH6R was, and wouldn't have helped me before purchase.  
    I think this is misleading and I'm pissed off- I purposely purchased two SATA 160gig drives when buying the parts for my new computer, soley to do RAID striping, and now I can't.  I will be asking NewEgg for a refund and will likely not be buying another MSI product.
    IF I were to purchase another MSI board, what SHOULD I get to have the SATA RAID features?  (and will accept my P4-3GHz 800M LGA775 530, and DDR2)

  • 915P-Combo drive setup question

    Great forum – I’m glad that I found it (just wish I found it before putting my system together).  I just constructed my first pc based on a 915P-Combo motherboard and everything has gone well.  I only made one mistake – I ordered two SATA 160G drives thinking I could do a SATA RAID 0.  Oops...
    There are two reasons why I thought that I could – one is on the motherboard box it says “SATA and IDE RAID compatible”.  Ok, that can be read two ways – I know.  Well, then I actually downloaded the user manual and it describes how to set up a SATA RAID array (in Chapter 5).  So I was a little surprised that it can’t do SATA RAID.  So now I’ve got my two SATA drives set as two separate drives.  No big deal, and for the price the motherboard is a great value anyway.
    So my question is that I need to build a second machine that will basically be a clone of the first and I wanted opinions about the hard drive options.  Since I will be playing games and doing some home theatre stuff (watching and recording movies) I would like at least 300G with good read/write specs.  I also want the simplicity of a single drive so it looks like my options are:
    1)   A single large SATA drive (300G or so)
    2)   Two IDE (150G or so) drives in a RAID 0 array
    And I just wanted to know what the opinions of the forum are.  Will the performance of the IDE RAID 0 be that much better than the 150Mbps (that I understand SATA can do) to justify it?
    Also to do the IDE RAID 0 my understanding is that I would hook one drive to IDE2 and one to IDE3 (with them both set to master) – is that correct?  I would have my DVD-R/W on IDE1 as it is now.
    I appreciate any opinions you have on this.  Thanks for your help.

    I recommend 2 x 160GB IDE HDDs, RAID 0 + 1 x 250GB/300GB SATA HDD + Dual Channel 512MB DDR 533MHz RAMs + Enermax 475watts / Antec 480watts PSU + P540 - 3.4GHz CPU.
    The 150MBps on SATA is just the theory only, the actual transfer rates is still dependent on the system overall performance so don't rely on it too much as you'll never get to even hit 100MBps on any system in the real world enviroment. This applies to IDE as well.
    IDE Setup Guide

Maybe you are looking for