915P Combo No Raid option please help

Hi everyone,
Recently I bought MSI 915P combo FR and 2 S-ATA HD and 1 ATA HD.
I want to use the two S-ATA HD as Raid but BIOS does not let me select the raid option under IDE/S-ATA configuration. I have tried to clear CMOS and use different BIOS version and checked all connection but nothing helps.
Any help, advice and suggestion is very welcomed
Thanks in advance

Quote
Originally posted by Guci
The MB is packed with the software that can be used for SATA Raid configuration and in the manual it is explained how you have to configure your SATA controller as RAID in the BIOS (please download the manual for this mobo and look at chapter 5) as well as in WindowsXP environment.
Please take a look at page 1-2, under Chipset, u will c this "Serial ATA 150 RAID 0, RAID 1 and Matrix RAID (for ICH6R only)."
Quote
Hi Darkslayer,
It is written at least on the pack that it does support both SATA and IDE RAID and the chip is ICH6 and ICH6R ready.
I have follow the instruct mentioned but I do not see the RAID option anymore since updating the BIOS
BTW, maybe u should call up ur local MSI distributor and ask the what the ICH6R ready mean. I wish to know as well

Similar Messages

Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik

13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

How do I convert a standard user to an administrator if i have no other admins on the computer, re-bootimg NOT an option, please help!!!!!!

how do I convert a standard user to an administrator if i have no other admins on the computer, re-bootimg NOT an option, please help!!!!!!

Please take these steps to restore administrator privileges to your account. This somewhat tedious procedure is only necessary if you've confirmed that no adminstrator account exists on the system.
If you don't already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need guidance. You won't need the backup unless something goes wrong—which is always a possibility.
Step 1
Start up in Recovery mode. The OS X Utilities screen will appear.
Step 2
Take this step only if you use FileVault 2. Launch Disk Utility, then select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
Step 3
Select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Select your startup volume if not already selected. Pull down the menu labeled
Select the user account
and select
System Administrator (root)
Follow the prompts to set a password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9. I suggest you write down the password. If you don't write it down and forget it, you'll have to start over from Step 1.
Select
 ▹ Restart
from the menu bar.
Step 4
This step, like Step 2, applies only if you use FileVault. Log in as usual, then select
 ▹ Log Out...
from the menu bar, or press the key combination shift-command-Q. Don't restart. You'll be returned to the login screen.
Step 5
At the login screen, click Other... Enter "root" (without the quotes) in the Name field, and enter the password you set in Step 3 in the Password field. You should now be logged in as root. This is a potentially dangerous condition. Do nothing while logged in as root except as indicated below. You'll be fine as long as you don't deviate from the plan.
Open the Users & Groups preference pane. Select your usual administrator account in the list of users and check the box marked
Allow user to administer this computer
You'll be prompted to restart. Do that and log in as yourself—not as root. Your administrator status should now be restored.
Step 6 (optional, but recommended)
Follow the instructions in this support article under the heading "Disable the root user." You must authenticate in Directory Utility as "root" with the password you set in Step 3. Authenticating as another administrator won't work.
Credit for this idea to ASC member wessongroup.

My iphone5 was battery emptied. when i charged it, its been hours but the apple logo was keep on blinking. iphone 5 was not opened. what is the best option. please help.

my iphone 5 cannot be opened. when i charged it, the apple logo kips on blinking but it was not opened. what is the best option to do.? please help.

- Make an appointment at the Genius Bar of an Apple store. I suspect the battery is on its last legs
Apple Retail Store - Genius Bar

K7n2 Delta RAID Setup ----PLEASE HELP

Can someone explain how a RAID - Striping should be setup on this MOBO? I can not get the board to see the 2nd drive. I have duplicate Maxtor 40gb drives and it will only see one of the drives. I am using IDE3 for one of the drives and then putting the other drive on IDE1. The manual states that you can only have 1 HD on IDE3 thus the reason for setting it up this way. I have also tried the 2 maxtor drives on IDE1 with another drive on IDE3 (dummy RAID) hoping that this config would work as well, but it did not!
Please help!!!!!!!!!!!!!
Thanks in advance for any and all replies.

It does support RAID. I have been able to go into the Fastrack utility and setup a RAID consisting of one drive. The manual also states that all IDE slots support RAID. It has the promise 376 chip.

Bootcamp is not showing install windows 7 usb option please help

bootcamp is not showing install windows 7 usb option please help

Tom von Mom wrote:
So MacBook Pros with DVD players doesn't support booting from USB stick?
They don't support booting Windows from a USB stick.

I recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

i recently bought a new iphone 5s from UAE , but unfortunately i did not find the facetime on my new iphone, how come that i bought a new iphone with missing options , please help

Your earlier phone must have been originally intended for sale in another country and must have been purchased from somewhere other than an authorized Apple retailer. Phones that are intended to be sold in the UAE have FaceTime permanently disabled. The option is not there and cannot be made to work.

Connected Combo box problem !   please help me

Dear Friends....!
I am developing project in which i have 3 combo :
1) District Selection
2) Taluka Selection
3) Village Selection
Depend on village selection , perticular persons on that village is displayed on the page.
This values must be fetched from DATABASE !
<b> I tried with JAVASCRIPT but with it i can connect two combo and
can't access database inside javascript. WHAT IS THE SOLUTION EXCEPT AJAX ( That i don't KNOW ) </b>
may be i can put 3 combo together and on first OnChange event
i can submit page and process another page and put values in
another combo and forward page to combo page again.
i am very much confused HELP ME !
please i don't know AJAX else problem would be easily solved.
EVEN I CAN"T MANUALLY PUT DATA IN JAVASCRIPT bcoz my villages
are more than 400.
how to put java database code in javascript OnChange event ???
to fetch data of another combo ?
HELP WITH EASY SOLUTION.
Thanks
GHanshyam
================================
SOLUTION FOR TWO COMBO
function populate(o) {
d=document.getElementById('de');
if(!d){return;}
var mitems=new Array();
mitems['Choose']=[''];
mitems['Salads']=['Select Item','Tuna Salad','Cesar Salad','Green Salad','Prawn Salad'];
mitems['Main Courses']=['Select Item','Filet Mignon','Porterhouse','Flank','T-Bone'];
mitems['Drinks']=['Select Item','Milkshake','Soda','Mixed Drink','Juice'];
mitems['Desserts']=['Select Item','Ice Cream','Fresh Fruit','Pie'];
mitems['Snacks']=['Select Item','Brownies','Cookies','Potato Chips'];
d.options.length=0;
cur=mitems[o.options[o.selectedIndex].value];
if(!cur){return;}
d.options.length=cur.length;
for(var i=0;i<cur.length;i++) {
    d.options.text=cur[i];
d.options[i].value=cur[i];

<script type="text/javascript" src="dropdownBox.js"></script>

<form action="" method="get">
<label for="or">Our menu:</label>
<select name="or" id="or" onchange="populate(this)">
<option value="Choose">Select from the Menu</option>
<option value="Salads">Salads</option>
<option value="Main Courses">Main Courses</option>
<option value="Drinks">Drinks</option>
<option value="Deserts">Deserts</option>
<option value="Snacks">Snacks</option>
</select>
<label for="de">Select:</label>
<select name="de" id="de"></select>
<input type="submit" value="Show me" />
</form>
<p><div align="center">
</div><p>

may be i can put 3 combo together and on first
OnChange event
i can submit page and process another page and put
values in
another combo and forward page to combo page again.Almost there. What you should do is submit the page on the onChange event of the combo box; but submit to the same JSP. Then, depending on the values that each of the combo boxes contains, run a query for villages in that District and under that Talluka.
And populate the third combo box. If any one of the ( first two ) boxes is empty i.e user didnt' select a value, then you'll automatically get no value for the combo boxes from the query.
Something like this
<%
    String selectedDistrict = request.getParameter("districtcombobox");
    String selectedTalluka = request.getParameter("tallukacombobox");
    //make sure you don't nulls
    selectedDistrict = selectedDistrict == null?"":selectedDistrict;
    selectedTalluka = selectedTalluka == null?"":selectedTalluka;
    PreparedStatement psFetchTallukas = con.prepareStatement("select tallukaname from tallukas where tallukadistrict = ?");
    PreparedStatement psFetchVillages = con.prepareStatement("select villagename from villages where villagetaluka = ?");
     psFetchTallukas.setString(1, selectedDistrict);
     psFetchVillages.setString(1, selectedTalluka);
   rsTallukas = psFetchTallukas.executeQuery();
   rsVillages = psFetchVillages.executeQuery();
//now, print out your <option> elements under the corresponding <select> tags for each of the 3 select boxes
%>For your onChange event you don't need to do anything except call form.submit() where the action should be the same JSP. In case your form is going to be submitted to another page on the final submit i.e after selecting all required values; then in the onChange event handler, before the submit(), you should change the action property of the form to the same page and then submit.

Probleme whith "MO: Operating Unit profile option" please help.

i have this message when i call this API:
HZ_CUST_ACCOUNT_V2PUB.CREATE_CUST_ACCOUNT,
the message is :
1. Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
2. Column account_number must have a value.
please can some one help me !
thinks a lot.

Hi
I have found the below mentioned information on MO: operating Unit Profile option from the Oracle E-Business Suite Multiple Organizations & Oracle General Ledger Reference Guide which directly or indirectly requires the setting of the profile option at the appropriate level (responsibility, site etc)
Profile Options not Owned by General Ledger:
The following profile option affects the operation of General Ledger, but is not "owned" by General Ledger:
• MO: Operating Unit - This profile option controls which operating unit a particular responsibility is assigned to.
Note: General Ledger's Account Inquiry window ignores the setting of this profile option. This allows you to drill down to your subledgers independent from their multiple organization setup. As a result, when you drill down to subledger details, General Ledger will show you all of the transactions that comprise an account balance, regardless of which organization originated the transaction.
To use multiple organizations, you must define an accounting setup with at least one legal entity, a primary ledger that will record the accounting for the legal entity, and an operating unit that is assigned to the primary ledger and a default legal context (legal entity).
You must set either the MO: Operating Unit or MO: Security Profile profile option for each application responsibility to use Multiple Organizations context sensitive applications. When you connect to the Oracle Applications, you sign on by entering your user name and password. Then, you choose a responsibility that is available to your user. After you choose your responsibility, there is an initialization routine that reads the values for all profile options assigned to that responsibility. Oracle Applications allows you to see only the information for those operating units that are assigned to your responsibility.
Hope this helps.
Thanks and Regards
Manish Jain

Managing Shuffle Option, Please Help

I want my Ipod Nano to shuffle only through my top rated songs, which is easy to figure out for party shuffle in Itunes. My problem is my Ipod still seems to grab songs from wherever it wants. I feel like I have to learn to use Itunes again since the new version came out.
How can I make my Ipod shuffle songs only from certain playlists ?
Any help is appreciated

Well, when I goto the 'Top Rated' section of playlists all that does is play my top rated from first to last, How do I get it to shuffle through a particular playlist rather than play from first to last?
The only way my Ipod seems to shuffle is completely random, I want to be able to somehow narrow the shuffle playlist a bit. I have alot of songs/playlists are mood/activity specific, occasionally I just wanna shuffle through a certain playlist or even higher rated songs in general.
Is Party Shuffle different than my independant Ipod shuffle option ? Seems that way.

Cannot set up find my iPad option please help

When I go to put my apple id it keeps telling me is invalid that my password and my username don't match but I'm able to go to iTunes and download games with the same apple id! I put my whole email an nothing please help

You did set up or already have a MobileMe account correct? Read this for help setting up.
http://www.apple.com/ipad/find-my-ipad-setup/

PM8M-V, SATA, ...RAID. Please Help.

Let me start this off by saying I don’t know much about SATA or RAID but that is why I am making this PC. I recently purchased a PM8M-V motherboard and can’t seem to get the SATA drives to be seen. I have 2 Maxtor MaxLine Plus II SATA150 250GB drives (kinda confused about the power connector(s) as well). After much reading I THINK I want to go with a software RAID1 setup (C = 50GB / D = 200GB) if that is possible. RAID or not, I still need the drives to bee seen. I’ve been reading everything I can find for a week now and have nothing so far. I’d be interested in knowing what all of the other choices in the BIOS boot sequence mean, and when & how to use the floppy disk in the package, among other things not covered in the literature. My last PC was made when dinosaurs still roamed the earth and now I’m playing catch-up. Anyway, I want to use Windows 2000 (NTFS). I have an SP3 and an SP4 disk. I remember reading somewhere that I needed SP4 either for RAID or partition size or something to that effect (I don’t remember). Other details about my system: P4 3.4GHz HT, Kingston 1GB DDR (2x 512MB stick), 400W PSU, 1 Asus 52x E-IDE CD-ROM (eventually want 2 cd-roms). I really need some help here.

x2---> http://www.tigerdirect.com/applications/searchtools/item-Details.asp?EdpNo=119638&sku=TSD-250M
as stated here (search for "sata"): http://www.msi.com.tw/html/products/mainboard/testreport_pdf/7104/hd.pdf
found here: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_trp_detail.php?UID=683
C:~50GB = OS & Programs.
D:~restGB = audio files.
If my RAID-0 is successful shouldn't C: show as 100GB? I'm so lost.
The Driver CD is not just only for my motheboard? What a genius way to save money! and cause problems.

Trying out Survey reporting options (Please help)

I am attempting to create a survey - our company does not use an LMS (we use Captivate for simulation videos), so I believe the best option for reporting is using Acrobat.com.
Any suggestions would be welcome!
First question: What is the best reporting option to get simple survey results back to a user (me) without an LMS?
Second question: How do I accept the user agreement (see screenshot)?

Hi there,
If you do not have an LMS, then you can get the reporting using Acrobat.com or Internal Server Reporting. You need to have Quiz results analyzer at your end to get the reports.
Please log on to Acrobat.com and accept the end user license agreement after logging there, then configure acrobat.com settings in Captivate.
Thanks.

I can't print two-sided with my macbook air. i've tried to look for the driver in the settings of printer and faxes but there is none, my printer is able to print for that kind of option. please help

Canon MP280 Series

When you select print you should see a menu option labeled Printer Settings (or Printer Options). This may be hidden in 2 different ways. First, the program may have minimized the print dialog box. Look for a button labeled Show Details. If you see it you'll need to click on the button to see all the printer options that are available. Having done this you'll see more options. Typically you'd look for the Printer Settings under a popup menu labeled Layout but sometimes something else is showing. For example, below you'll see that Safari hides it under Safari.

Raid 0 - Please help !!!!!

I am new to raid and am having a few problems setting up 2 drives(WD raptor's 74gig) in Raid 0.
I am not using the nVidia onboard Raid controller, i have a promise fasttrack S150 SX4 with 256meg RAM. When setting up Raid 0 and intalling windows i do the following.
-@ boot up i go into the fasttrack Raid BIOS and create an array using both drivers with a stripe size of 16k.
-i connect my 80gig IDE drive and install windows XP on it
-i then use windows xp disk managment app to create 2 patitions on the raptors(the app sees the 2 drives as 1 +-140gig drive). All is as it should be. The 1st partition i make 10gig (1024 x 10) and the other partiton the rest of the drive +- 128gig. the 10gig is for the OS (winxp). I format both patitions using a 16k cluster size.
-i then turn off the PC and remove the 80gig IDE dirve.
-i now install windows xp from the CD-rom, pressing F6 and loading the fasttrack dirvers off a 1.44 stiffy
all is fine windows xp intallation sees the 2 partitons. i select the 10gig partiton and tell windows to install in it. i do not format the partition as this was altrady done.
after the winxp intallation copies all the files it want and completes the 1st part of the installation the PC reboots and i get this error message
"A disk read error occurred" press Ctrl+Alt+Del to restart.
Why am i getting this message???

Looks like the boot dont pick the pci card , but tries something else.
Try this:
Set the order to cdrom on all
1'st boot device=cdrom
2'nd boot device=cdrom
3'rd boot device=cdrom
Boot other device=enabled
This way it should skip searching for boot records on floppy and internal
ide controllers and go straight to the pci card .
And as in the prevoius reply , i agree. I have tested cluster size 4k and 16k
and with todays fast computers you don't notice any difference.
If you run a server , you might get some better performance with special apps
caused by better I/O ,but for a home machine don't bother.
Been running NTFS with default cluster ever since .
Defrag and other disk maintnance also can give you trouble with anything
else than default size.

915P Combo No Raid option please help

Similar Messages

Maybe you are looking for