915P neo2 pl sound problem - still!!!

What up. I got:
Intel 915P neo2 platinum
P4 2.8
2x 512 MB DDR 533 Mhz
5.1 Philips speakers
Yes, I read the sticky topic in this section, yes I did the thing with manual installing driver but the problem is still here.
Here's my story:
I get brand new computer year and few months ago. I don't remember how I installed it cause most of it did my friend, but it was SURELY nothing special about it, cause I didn't even had and Internet connection in that house at the time so I didn't download anything special. Just drivers from CD. Everything was cool but last weekend I had to reinstall my Windows XP. I did that but after few hours of work in it I realized that subwoofer is not workin. The weird thing is, that it worked/work when I click on the pictures of speakers in that C Media driver... you know... the room with speakers where you can setup it's volume and girl is speakin "Left front", "Center"", "Subwoofer" etc. It work OK.
The problem is that it not work in normal applications, like BSplayer, Winamp, WMP or whatever. Not even 5.1 sound, only 2. Yes, I made setup in windows in sound settings to 5.1.
So I reinstalled Win again and installed the other one - without SP2 (I used SP2 before, didn't expect any problems). Couldn't install even the drivers from CD, at least SP1 required :-(
I'm soooo sick of this, I want finally solve it so PLEASE HELP ME!!! 
Please write me step by step what to do, no matter if I have to reinstall Win again... I'll do it I just want it to be finally OK.
Thank you!

What up, thanks for replies.
Actually, what I did different was that thing with Realtek drivers. And after that finally those newest Cmedia drivers could find my device. It's better then it was. At least 5.1 works... but not in a good way. When I play 5.1 movie I hear only left & right channel, no surround or voices (center). :-(
I tried HL2 game and I think it was OK, 5.1. When I play any stereo music/video or anything I can hear it in ALL speakers. I always wanted it but what if I want to turn it off? What if I want stereo in stereo as it should be?

Similar Messages

  • Plz help 915P Neo2 Platinum temperature problem

    Hi  All   
    i have 915P Neo2 Platinum (V1.0B) main board
    one day my computer stop working and when i press power button nothing happen
    i change power supply and it work but when i log into windows it freez and stop responed
    when i press restart button the computer didn`t work i had to remove power cable and put it again to work
    i try linux it work for some time and stop respond and i had to remove power cable and put it again
    my cpu temperature say it`s 59 but when i but my hand on fan i didn`t find it hot
    i updated bios version
    from this page
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=626&kind=1
    to 3.6 because it said  that fixed bios detect wrong CPU temperature.
    some time the cpu temp say`s 104  c !!! put when i toutch the fan i didn`t find that it`s hot like that
    some times when i press restart button it make shutdown not restart
    i can`t install windows because it freez when i try to do that
    i didn`t know why the computer work for some time  and freez
    and some times it didn`t work and i had to leave it for some time and try again
    can any one help me to find why this happen is the problem in power supply that i replace it or what  plz help 
    sorry for my language i speak english littel
    Regards

    Quote from: BOSSKILLER on 28-March-07, 19:38:10
    what is your newest PSU? can you provide PSU details(can be found into PSU sticker), and remaining parts of your hardware e.g. what VGA you got?
    "some time the cpu temp say`s 104  c !!! put when i toutch the fan i didn`t find that it`s hot like that "
    seems your CPU heatsink is not making good contact with CPU surface, or there is too much thermal paste or CPU cooler is going down.
    power down PC, remove power cord from the PSU  and re seat CPU cooler, clean CPU socket from any dust, clean CPU surface from existing paste and apply a new one. then mount CPU cooler (ensure its mounted property, ensure CPU FAN is spinning at expected RPM). re-test, if no go, change your CPU cooler with new better one which gonna do the job.
    thank you very much for your response
    i change the PSU again  with other and the computer work fine now
     and use new cooler and the temp between 40-55 is this good ? new fan speed 3000 -4000 rpm
    and  sys temp is between 30-40
    my hardware is
    P4 3.0 LGA 1 MB cache
    256 DDR2 x2
    915P Neo2 Platinum v 1.0B
    magic  power supply  300W
    Western Digital 80 GB x 2 @ ATA
    VGA pci express 128 ATI
    WinXP + SP2 + all latest Windows Updates

  • 865PE Neo2-PS sound problems

    Hi,all. I just got a 865PE Neo2-PS board last week,but found some problems with the sound.When i was running some games(e.g ut2004,nfs) for some while,the sound would just stop.And i got back to desktop,all the media files could not be played either.I checked it in directx,the result is directsound error  0x88780032, DSERR_INVALIDCALL. I can do nothing but to reboot my pc,and sound is in good condition again.I've updated the  Realtek Avance ALC AC'97 Audio Drivers and INF Drivers,but that doesn't work.Could somebody help?

    Hi
    It sometimes happens that when playing Battlefield 1942 the sound just disappear.
    The only thing I can do is to restart the game.......
    It´s not often but it happens.
    And for Maesus : dont u mean DX 9.0b......and not 9.1b
    If you find an answer, let me know m8!

  • Sounds problems still

    I just purchased a new 60g Video Ipod and I am in the Audio Visual
    Business and have a good ear. I have a friend who works at Apple in CA and he too listed to my Ipod and he said he hear distortions as well compared to his older one He has a older generation Ipod and the sound is very good on the old one.
    My Ipod has a distorted sound and it was verified by a Apple Programmer
    and Engineer. I sent it back to Apple and they Cannot find a problem.
    Does this mean the new Ipod has a Design Flaw with the Audio Circuits?

    Update: I happened to pick up the ipod by the bottom right hand corner (below the click wheel) and the distortion stops, so it appears to be the housing so there is a loose connection or something is loose. Regardless of me updating it with the ipod updater last night the same thing happens so I have taken it to an Apple centre confident that it is a hardware problem not a software problem.

  • MOVED: MSI K8T Neo2 Onboard Sound Problem

    This topic has been moved to AMD64 ATI/SiS/VIA based board.
    https://forum-en.msi.com/index.php?topic=108589.0

    About the exclamation marks:
    Goto Device Manager -> View -> Show hidden devices (enable)
    Goto the multimedia-section (where the exclamation marks are) and uninstall all devices marked with an exclamation mark LEAVE THE OTHERS!
    ==> Note: if you see two of the same installed devices of which one is installed wrongly (excl. mark) and the other is grayed out, uninstall them both. Note to leave all other things, like codecs, alone. If you don't, you ruin your Windows <==
    Now, reboot Windows and when the hardware install wizard pops up, cancel that and install the audio drivers manually.
    Then the JAUD-pin header: open your case. The JAUD pins are at the bottom left of your board. JAUD1 should be printed next to it. It looks like this:
    o o o x o
    o o o o o
    The x is the place where a pin is missing. now, both pins next to that one should be connected with a jumper
    o o | o |
    o o | o |
    The two | show the pins to be connected.

  • New W540 Sound Problem

    The sound is breaking up from all sources (internet, or music files on HDD)

    Sound problem still exists after doing the following:
    Installed BIOS Rev. 2.08
    Installed device driver:     Realtek Semiconductor Corp.  6.0.1.7127

  • A few bios problems with my 915p Neo2 platinum board

    I'm wondering af anyone here can help me.
    I just got a new system and a friend of mine helped set up the bios for me, afterwards he failed to tell me how he had configured the bios (my first big mistake).
    Since the buidling of the system there have been 3 short beeps at the beginning of startup. I was told that it was a warning system of some sort and when i looked it up, the informations pointed towards a problem with the RAM.
    I ran memtest86 and it found no problems with the RAM, so i contacted the site i bought the parts from and they suggested i reset the bios.
    I did so and the beeps remained, but my DVD and DVD-writer drives arent being detected anymore.
    I took my PC around to another friends house with only his keyboard and monitor connected. The beeping had stopped before we changed anything. Bringing it back around to my house resulted in the beeping returning.
    From this i gathered that the only things different may have been his power source and the peripherals i have attached to the back of the case. (speakers, printer, kb/m, etc)
    Going by the manual map, my 2 HDDs are connected as slave/master in IDE port 1 and my two DVD drives are connected to the yellow IDE port that is closest to IDE port 1 (it's either IDE 2 or 3, the map isnt too clear on which is which).
    Long story short, can anyone help me in identifying the source of the beeps and their meaning, an optimum setup for my bios and how to get my DVD drives to work.
    Thanks in advance to anyone who can help me. I'm fairly new to building computers and my friends are the type to suddenly become unavailable as soon as a problem arises.
    edit: just noticed i missed the spec description part menitoned in the rules.
    MSI s775 915P-Neo2-Platinum
    Version 1.4 of bios
    Pentium 4 540 LGA775 3.2GHz
    Corsair VS 1GB DDR2 240 pin RAM
    256 MSI PCI-express GF6800GT, latest drivers
    600W 3XS-EzCool PPFC
    Western digital WDC WD1600JB-00EVA0 (160GB) (master)
    Seagate U series 5 HDD ST340823A (40GB) (slave) Both on IDE slot 1
    Liteon DVD-ROM (spec unavailable)
    MSI 4x DVD-RW +/- (part no: G57-CB00243, this is all i could find on this part form the box)
    Sound Blaster Audigy
    Windows XP SP2
    second attempt at clearing up the garbled mess from above.
    Motherboard is making 3 short beeps on startup. Indication of a problem with memory. I've established that it's something external that causing the beeps as the memory has checked out fine with memtest86. Hence i will be checking all the attached devices.
    I was guided to reset the bios in an attempt to clear up this problem above. Doing so has resulted in my bios being unable to detect my DVD drives.
    My DVD-drives are connected to IDE port 2/3 (manual is unclear on which is which).
    Everything was in working order (with the exception of the beeping) before the bios was reset but due to my lack of knowledge/involvement with the original configuration of the bios, i'm at a loss as to how to fix it.
    If anyone could recommend me any updates for the bios, or could advise me on how to configure my bios accordingly to the parts i have i would be most appreciative. Also, if osmeone would be abel to shed some light on the beeping issue i would be thankful also.

    Quote
    Originally posted by Danny
    The board uses a Via raid controller for the IDE 2 and 3 channels, and you do have that enabled.
    Under SATA devices configuration you should select Enhanced instead of compatible. But this should effect your problem.
    I see there is a 1.5 bios released that mentions the via controller
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=601&kind=1
    Maybe someone with this board will pitch in and help.
    I saw this and was wondering if i should install it. It would be the equivelent of resetting the bios again wouldnt it? So it wouldnt be that much of a step back from where i am at the moment and it might be able to sort my IDE problems.

  • 915P Neo2 Platinum problems

    I'm hoping someone will be able to help me as I've been tweaking bios settings for 3 days and not managed to get anywhere with this.
    I've have the following:
    1x 915p Neo2 Platinum Mboard
    1x Sapphire x600 235MB Graphics
    1x Corsair PC2-4200 512 MB DDR2
    1x 40GB Western Digital IDE drive
    1x 30GB Western Digital IDE drive
    When I first switched it all on, the board powered up but I got no display and no beeps. After pulling out all wires and adding the minimum of devices I got it to start up properly and got into bios. Eventually, after tweaking some settings and then systematically adding each device in turn I got everything connected whilst maintaining stability so it would still boot up.
    Next problem I has was that it wouldn't boot from a floppy. It kept giving me "Disk I/O error". I tried several different floppy disks - same problem. I changed the floppy cable and still got the same error. I then bought a new floppy drive and tried that but still got the same problem. Decided to carry on and install XP incase floppy started to work later.
    When installing, I pressed F6 to load RAID drivers. I selected the IDE RAID driver, it chugged away and carried on loading setup. My 2 IDE drives were successfully identified and I selected the installation drive and formatted it (tried quick and full format), after it had done this, it then tried to load the RAID driver again from the disk. At this point, the driver disk is still in the floppy drive, but it then says that it can not load the file from the disk and to try another. Again I tried several disks all of which gave the same problem.
    I've searched this forum to help me with my earlier issues and found answers but couldn't find any info on this one. Can anyone help? I'm starting to think that my mboard has a poorly floppy controller. Also, I've got completly confused about the RAID setup, I currently have both my drives, 1 as master and 1 as slave, in IDE2 and have not touched the RAID BOIS setup - does this mean I will still be able to use these as 2 different drives? Eventaull I will add SATA RAID.

    Quote
    Originally posted by Del UK
    Hi Masjj,
    Could list some details of the PSU you using please, as this would help. Please see sig below as a guide.
    Confirm please:
    You can boot and format, then when install happens, failure????
    Del
    My spec is as follows:
    No OS yet
     - tried Win XP (blue screen after RAID driver load)
     - trie Win XP with SP1a ("can not load viaraid.sys" error after disk format)
    MSI 915P Neo2 Platinum (MS-7028 Ver 10A)
    BIOS - Shows "915P/G NEO2 A7028IMS V1.0 05/27/04" on first screen, in BIOS setup screen shows v02.56
    Intel P4 3.0GHz PRESCOTT, 1MB L2-Cache, 800MHz FSB
    Sapphire X600 256MB + 19" TFT
    Soundblaster 5.1 Live card with LiveDrive
    Western Digital 30GB IDE (Master)
    Western Digital 40GB IDE (Slave)
    Pioneer DVR-105 DVD/RW Burner
    DVD-ROM
    WD 800JB+CD-RW
    1* Corsair Value 512MB PC4200 DDR2 Ram
    PSU - eTech 460 +3.3v-28A +5v-30A +12V-30A
    I cannot boot from Floppy, can boot from CD. When I try to install WinXP with SP1a, I hit F6 to load RAID drivers, choose driver from list. Setup then detects HDDs, I format install drive, then it tries to load RAID driver again from disk and gives a fail message of "unable to load VIAMRAID.SYS" and will not continue. If I try to install without RAID drivers, it says that there is no  storage device connected.

  • 915P NEO2 Platinum (V1.0b) problem

    Hi, I just bought a whole new fresh system..
    MSI 915P Neo2 Platinum (V1.0b)
    Intel P4 LGA 775 530 3,0Ghz 800Mhz FSB HT
    Sapphire Ati x700Pro 128MB PCI-Express
    200GB WD Caviar WD2000 200GB 8Mb cache 7200RPM IDE
    Lite-On DVDRW 8x+/- RW
    Aspire 500W Visible Power
    2x256MB DDRII-533 Corsair ValueSelect
    now the problem I have is next:
    I connect evrything correctly like I did a million times before with other systems..
    I boot it up and it goes good.. I check my Bios, everything detected all ok
    then I insert the WindowsXP Pro CD and reboot..
    it gives the screen with Loading Files: blablabla u know that when its preparing the installation..
    then I my screen goes black for a second.. normal I think.. then I get a Bluescreen!! even when windows isnt installed yet :/
    So I think , hey I got another Maxtor 120GB IDE over here with windows onnit and all good. so i put that in, works like a charm.. so I think, lets try to install windows on it from another system so i do so.. I plug it back in my new system and it gives the exact same bluescreen when I just try to boot up windows.. but I was able to install windws on it from the other system so its not my HD..
    I really dont know what to do, I did a memtest I got from another system so it aint the memory neither..
    this is the bluescreen error:
    *** STOP: 0x0000007E (0x0000005, 0xF853D0BF, 0xF8989208, 0xF8988F08)
    *** pci.sys - Address F853D0BF base at F8536000, DateStamp 3b7d855c
    can anyone help me plz ?

    had exact same problem so i followed what has been said. this got rid of the message Technical information:
    ***Stop: 0x0000007E (0XC0000005, 0XF853D0BF, 0XF8989208, 0XF8988F08)
    *** PCI.SYS - ADDRESS F853D0BF BASE AT F8536000, DATESTAMP 3B7D855C
    but i now have a new message Technical information:
    ***Stop: 0x0000007B (0xF7C8263C , 0xC0000034 , 0x00000000 , 0x00000000)
    system spec :915p neo 2 plat
    intel 540 processor
    corsair vs1gbkit533d2
    seagate baracuda 80gig hd
    pny geforce fx5200 pci
    lg dvd rw drive
    400w psu
    plz help!!

  • I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through itunes, but the sound is still absent, and still problem with sound an

    I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.

    Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • 915P Neo2 Platinum Hard Drive/Optical Drive Configuration

    My main drive is the 120Gb SATA drive listed below but I'd like to utilise a 160Gb PATA h/d that I used to use for backups on my previous system.
    I have the SATA drive configured as my boot drive.  ATM, my DVD drives are connected to IDE1 as I have a recovery CD which needs to be booted should I need to use my backups.
    I've been tinkering with this system and would prefer to have the parallel IDE drive permanently connected to IDE1 but still boot from the SATA drive.  To this end, if I connect my DVD drives (configured as master & slave) on a single IDE cable to IDE2 and boot, they aren't recognized as bootable devices when I hit F11 after POST.  However, when Windows boots they do appear.  With this configuration I can't restore data because I need to boot from a recovery CD-ROM.
    Is it possible to have optical drives connected to one of the RAID IDE connectors and make them bootable?
    If not, and since I do have 2 drives, I assume someone will suggest going down the RAID route.  Can RAID1 be configured across 2 hard drives if I have 1 x SATA and 1 x PATA?
    TIA.
    915P Neo2 Platinum PCI-E (MS-7028) motherboard
    BIOS v1.6
    Pentium 4 550 3.4GHz 'Prescott' processor
    Crucial DDR2 PC2-4200 512Mb RAM
    Asus Extreme GeForce PCX6600 GT 128MB (PCI-E) graphics
    Maxtor DiamondMax +9 7200RPM SATA 120GB h/d
    Floppy drive
    Thermaltake 480W ATX PSU Xaser Silent Edition
    Thermaltake Tsunami Aluminium Case
    LiteOn DVD-ROM
    LiteOn Dual Layer 16x DVD±RW ReWriter
    Windows XP Pro SP2

    Quote from: NovJoe on 05-April-05, 21:25:01
    To what I know, it is not possible to get Optical drives to work on IDE 2 and 3 since they are mainly for RAIDs and HDDs.
    Keep the Optical drives to IDE 1 and the IDE HDD to IDE 2.
    Thanks for your quick reply.
    I've tried that - get the same problem with boot devices in that the h/d on IDE2 won't boot.  (It holds a copy of my C partition.) 

  • 915P Neo2 Hard drive incompatibility?

    Greetings everyone,
    I've been searching the forums for a while but haven't found any solutions. I'm trying to put together my new computer:
    Intel 915p Neo2 LGA 775 platinum
    P4 2.8
    Corsair 512 DDR2
    Quantum Fireball CX 3.5 series 15G (kinda old)
    Maxtor 60G
    At best, I can get the CMOS to recognize the hard drives as secondary master and slave and windows constantly fails to load. I've never had a problem like this in all the comps I've put together and none of my buddies are familiar with the board.
    I've tried almost all cable and jumper combinations and the board still fails to recognize my hard drives as primary. We were able to get an old 5G hard drive to work even though it was a secondary, but only in safe mode. Is this a problem with RAID? I'm terribly unfamiliar with it. I would also not like to wipe my drives.
    Has anyone had a similar problem? I would love to chat.
    Best regards,
    Scott

    hi,
    Are your HDDs  SATA or IDE? I guess they are IDE, and in which IDE will be assigned as secondary, while Primary belongs to SATA.
    There is nothing to do with RAID. You still have the options in the BIOS to choose the first drive to boot regardless primary or secondary.
    Next is to take Danny advice and go for a fresh WinXP installation.

  • Wich bios driver for 915P neo2 platinum-54g

    915P neo2 platinum-54g m-board
    P4 630 3,0GHZ cpu
    2*512M Kingston 533MHz DDR2
    Club3d 128MB Radeon x300se hypermem PCI-E
    not sure of the power, but think it's 300w, 20-pin connector. (waiting a new power on monday, 400w ultra-low noise)
    Sound Blaster Live! Platinum
    So I read from the MSI site that the 915p neo2 platinum doesnt support p4 630, but the cpu support list says it does after the bios update..
    But now Im not sure wich bios driver to use cause I cant find the exact model from the site.
    I use that comp as a music studio comp and I get a crash in about half an hour the comp is on.. (using cubase program)
    At first the crash appeared at cubase startup, but after I updated the g-card & s-card drivers the crash was post-poned to that half an hour..
    But still, when I try the Core Center programs Auto overclocking test it crashes almost straight away.. Once I got from 200MHz to 205 MHz
    Other times it crashed straight away..
    So I think myself that the bios driver is the key, but Im not sure of it.
    Or wich driver to use.. the 915P Neo2 Platinum (7028v18) or 915P Neo2 Platinum v1.0b (7028v36)

    Quote from: ant3202 on 07-November-05, 08:00:33
    use MSI life update to update your BIOS, to minimise to kill your mobo.
    its not connected to the internet and I dont want to connect it cause its for music only...

  • 915P Neo2 Platinum

    Hope you guys can help i have the 915P Neo2 Platinum "NOT"(V1.0B) with the Broadcom BCM5751 onboard lan i had alot of the same problems with the sound and lan as others in this group and was able to fix it with the bios update. Every thing was fine untill i had to do a fresh install of xp home "dam kids" now my lan does not show up i made sure it was turned on in the bios and did another fresh install with no luck, hope you can help
    Antec true430
                           +5V       -5V      +12V      -12V     +3.3V       +5VSB
    Max. Load            36A     0.5A     26A         1.0A    28.0A        2.0A
    Min. Load             0A         0A       0.8A        0A       0A           0A
    Load Reg.            ±3%      ±5%    ±3%      ±5%     ±3%       ±5%
    Ripple V(p-p)       50mV    50mV    120mV    120mV  50mV     50mV

    The very first thing to do after fresh installation is to install Intel INF driver. Have you done that?

  • I have sound problem in My Cq40-144TU Laptop

    Hi,
    I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing. 
    But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
    please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
    Please help me sir

    What sound problem - no sound on anything, no sound on some apps ?
    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
    And for future info typing in all capitals is considered to be SHOUTING

Maybe you are looking for