92010NT_Disk1.zip fails to unzip
I have downloaded 92010NT_Disk1.zip as well as the zips for disk2 and 3. Disks 2 and 3 both decompress using PKZIP just fine, but the Disk 1 keeps failing on file 998 of 3204. I downloaded the 92010NT_Disk1.zip a day later, but it continues to fail the same way. The file size on both downloads matches what the web page says they are supposed to be. I'm using a cable modem at 768Kbps.
The site is: http://otn.oracle.com/software/products/oracle9i/htdocs/winsoft.html
The size is: 612,802,971
Anyone know what might be wrong here? Thanks!
I'm running in to a similar error. I've downloaded
92010NT_Disk1.zip
92010NT_Disk2.zip
92010NT_Disk3.zip
five times now
from this link: http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html
I've created C:\9idb_9.2.0.1 folder
and
C:\9idb folder w/ subfolders disk1, disk2, disk3
I download 3 zip files to C:\9idb_9.2.0.1 and when I unzip these files to their individual folders they don't unzip all three come back as invalid file archive errors.
The knowlege base and previous answers on the forum w/ regard to this problem, suggests that my FTP dropped out b/c of the difference in file size. However I notice on the link above that
92010NT_Disk1.zip is
612,802,971 bytes
when I begin downloading the file, however it prompts progress of ___MB out of 584 MB not 612. Previous downloads of this file have been no greater than 582,162,809 bytes.
After the fifth unsuccessful attempt unzip these files, I tried using Winrar ( http://www.rarlab.com/download.htm ) instead of Winzip because Winrar uses a utility to test the integrity of the archive with a checksum. You will be able to tell if the archive is bad or if it's something else. When I extracting the zip1 file to disk1 path, I got a message reading "the archive is either unknown format or damaged." So I tried unzipping it in the same folder with Winrar, it unzipped the files successfully in the 9idb_9.2.0.1 folder but came back with an "unexpected end of archive" error. Starting to feel a little frustration...
Help!
Similar Messages
-
Problem in 92010NT_Disk1.zip
When I try to unzip 92010NT_Disk1.zip I receive the following error message for file #'s 1509 through 1583:
Error in file #1509: bad Zip file offset (Error local header signature not found): disk #1 offset: 154754489
I redownloaded the file from your Website and received the same error. The file size is correct based on what your Website says it should be.Any suggestions how to correct this issue?
-
Downloading 92010NT_Disk1.zip
I have downloaded the 92010NT_Disk1.zip file twice and each time the file download has completed successfully. However, when I go to unzip the file, I get an "invalid archive" message. The size of the file on the http://otn.oracle.com/software/products/oracle9i/htdocs/winsoft.html page is 612802971 bytes (598440 kB) however when I am downloading the file, the message in the dialogue box quotes 584 mB, so there is a discrepancy somewhere. I have tried using pkzipfix but this doesn't work either.
If this problem has been resolved, please direct me to the forum/post where I can read the solution. Thanks!Hi OTN, thanks for checking into this. I tried using the GetRight utility program but got the same message when I went to unzip the file that was downloaded by GetRight. I am currently trying to download the file from different sources to see if that helps. Thanks for your help.
-
92010NT_Disk1.zip
This link to
http://download-east.oracle.com/otn/nt/oracle9i/9201/92010NT_Disk1.zipHi Jeffrey, I am experiencing the same problem. I have downloaded the 92010NT_Disk1.zip file twice and each time the file download has completed successfully. However, when I go to unzip the file, I get an "invalid archive" message. The size of the file on the http://otn.oracle.com/software/products/oracle9i/htdocs/winsoft.html page is 612802971 bytes (598440 kB) however when I am downloading the file, the message in the dialogue box quotes 584 mB, so there is a discrepancy somewhere.
If you are able to resolve this problem, please post a message to this forum, and I will do the same. Thanks! -
92010NT_Disk1.zip won't download
Trying to download 92010NT_Disk1.zip (9.2 RDBMS for NT disk 1), and not being successful. Disks 2 and 3 come in fine, but 1 will either die at 99% downloaded, or will complete, but when we try to unzip it, it complains that it's an invalid file type.
Anybody running into this and know how we can fix that? Thanks.Hi Jeffrey, I am experiencing the same problem. I have downloaded the 92010NT_Disk1.zip file twice and each time the file download has completed successfully. However, when I go to unzip the file, I get an "invalid archive" message. The size of the file on the http://otn.oracle.com/software/products/oracle9i/htdocs/winsoft.html page is 612802971 bytes (598440 kB) however when I am downloading the file, the message in the dialogue box quotes 584 mB, so there is a discrepancy somewhere.
If you are able to resolve this problem, please post a message to this forum, and I will do the same. Thanks! -
92010NT_Disk1.zip Errors -- Oracle9i Database Release 2
I have downloaded 92010NT_Disk1.zip twice now and recieve the same errors when unzipping the files.
Is there a download available without these errors? Below are a few examples of the issues with the zip file.
Thank You
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\io\ReadFullyInputStream.html
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\lang\AdaptiveClassLoader.html
Error: The system cannot find the path specified.
Cannot create C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\lang\package-summary.html
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\lang\TimeoutException.html
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\net\AuthenticatedServerSocket.html
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\net\AuthenticatedSocket.html
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\net\AuthenticationException.html
skipping file: unable to create a sensible filename out of C:\Documents and Settings\Administrator\Desktop\Oracle9i Database Release 2 EnterpriseStandardPersonal Edition for Windows NT2000XP\Disk1\stage\Components\oracle.apache.jserv\1.1.0.0.0g\1\DataFiles\Expanded\docs_nt\api\org\apache\java\recycle\AdaptiveController.htmlThis download has been up for some time so it's most likely a problem with the file transfer - did you verify the filesize matches what is posted on the web page?
You may want to use a download manager for this file if you keep getting the error - there are many available. (www.getright.com works pretty well).
OTN -
ASA 5505 Failed to unzip the Anyconenct Package
There is ASA 5505:
- 8.4(2) IOS
- FLASH: 128 Mb
- DRAM: 256 Mb
Requirements for 8.4(2) are acomplished:
For the ASA 5505, only the Unlimited Hosts license and the Security Plus license with failover enabled require 512 MB; other licenses can use 256 MB.
Are installed latest AnyConnect packeges for linux, some smatphones (each 4-5 MB). But for Windoes it's 21 MB and we got error "Failed to unzip the Anyconenct Package". In prior IOS version there was command cache-fs limit, by default it was 20 Mb. As i understand ASA now dinamically determines amount of cache memory and it's not enough.
Because of the increased size of the AnyConnect package from 4MB in AnyConnect 2.5 to 21 MB in AnyConnect 3.0, you may need to upgrade the ASA flash and memory card first.
If your ASA has only the default internal flash memory size or the default DRAM size (for cache memory) you could have problems storing and loading multiple AnyConnect client packages on the ASA. Even if you have enough space on the flash to hold the package files, the ASA could run out of cache memory when it unzips and loads the client images.
So there is a question, after DRAM upgrade to 512 MB will be there enough cache memory for Anyconnect packeges with total size 35-40 Mb?I have having the same issue on an ASA-5510 with 256MB DRAM 256MB Flash. I do not have this issue on an ASA-5550 with 4GB DRAM 256MB Flash, so I'm guessing the issue is with the memory size.
Also, from: http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect30/release/notes/anyconnect30rn.html
Flash and DRAM Requirements for Upgrade
Check for the space available before proceeding with the AnyConnect 3.0 upgrade. You can use one of the following methods to do so:
•CLI—Enter the show memory command.
asa3# show memory
Free memory: 304701712 bytes (57%)
Used memory: 232169200 bytes (43%)
Total memory: 536870912 bytes (100%)
•ASDM—Choose Tools > File Management. The File Management window displays flash space.
Because of the increased size of the AnyConnect package from 4MB in AnyConnect 2.5 to 21 MB in AnyConnect 3.0, you may need to upgrade the ASA flash and memory card first.
Caution The minimum flash memory required is 128MB for an ASA 5505; however, we strongly recommend 256 or preferably 512 MB. To support multiple endpoint operating systems and enable logging and debugging on the ASA, you will most likely need 512 MB of flash memory.
If your ASA has only the default internal flash memory size or the default DRAM size (for cache memory) you could have problems storing and loading multiple AnyConnect client packages on the ASA. Even if you have enough space on the flash to hold the package files, the ASA could run out of cache memory when it unzips and loads the client images. For internal memory requirements for each ASA model, see Memory Requirements for the Cisco ASA Adaptive Security Appliances Software Version 8.3 and Later. For additional information about the ASA memory requirements and upgrading ASA memory, see the latest release notes for the Cisco ASA 5500 series. -
Extension for creating a zip file and unzipping it
Iam totally new to Dreamweaver and the extensions. So please
help me with this.
Assuming i have a .zip file and it contains some html pages
along with css and gifs.
The req is to have an Import option, which given this zip
file, can unzip its contents. The user can work on these html
pages. When the user finishes working on them, I need an export
button so that we can package the entire stuff back into a zip
file.
How can i implement this ?
Is there any extension that is available for this ?
Eagerly looking forward to some useful answers...
Thanks in advance,
GaneshThere used to be one .. I'm not sure if that was in DMX time
or DMX 2004
time .. that, when installed, allowed you to select files
from the site
folder or the whole thing and create a zip from them. I don't
remember what
it was called or who created it .. but it might be on one of
my archived
disks or zips .. I'll try to check it out later today.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"Ganesh Ram" <[email protected]> wrote in
message
news:engarc$d62$[email protected]..
> Iam totally new to Dreamweaver and the extensions. So
please help me with
> this.
>
> Assuming i have a .zip file and it contains some html
pages along with css
> and
> gifs.
> The req is to have an Import option, which given this
zip file, can unzip
> its
> contents. The user can work on these html pages. When
the user finishes
> working on them, I need an export button so that we can
package the entire
> stuff back into a zip file.
>
> How can i implement this ?
> Is there any extension that is available for this ?
>
> Eagerly looking forward to some useful answers...
>
> Thanks in advance,
> Ganesh
>
> -
92010NT_Disk1.zip not able to download
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename: 92010NT_Disk1.zip
- Date/Time
- Browser + Version
- O/S + Version
- Error Msg
The link to the file 92010NT_Disk1.zip doesn't work when trying to download.
Any idea when it might be back online?
Please read and respond. You have my email addressCan't you thus right-click the ZIP file file and use "Save Link As" to save the ZIP file?
With what content type are the ZIP files send by the server?
You can also toggle the browser.altClickSave pref to true on the <b>about:config</b> page.<br />
Then you can hold down the Alt key and left-click a link. -
Module for data migration from pdf(zip) to pdf(unzip)
Hi all,
I am Working on Data migration using SAP XI with out using IR.
I want to Zip the pdf file in the Sender CC and unzip the same in Receiver CC.
I am using PAYLOADZIPBEAN to zip the pdf.
Did any one work on zipping and unzipping the PDF files?
Kindly let me know the Module I need to use for the same.
Thanks,
SreeHi Sree,
Please go through this blog and follow the step by step procedure for configuring your scenario.
/people/stefan.grube/blog/2007/02/20/working-with-the-payloadzipbean-module-of-the-xi-adapter-framework
Its a nice blog and i have configured my scenario using the same already.
Thanks and Regards,
Sanjeev. -
Unzip issue: Could not delete the zip file after unzip it
I have issue with the following code, the purpose is to unzip first then delete the zip file. But I could not delete the zip file. When I put a break point before my delete() call, I manually delete it and get the file is used by another process. Please help. Here is my code;
try{
File primeZip = new File(dir, fileName);
ZipInputStream zipStream = new ZipInputStream(new FileInputStream(primeZip));
ZipFile zf = new ZipFile(primeZip);
OutputStream out = null;
for (Enumeration em = zf.entries(); em.hasMoreElements();){
String fileName = em.nextElement().toString();
out = new FileOutputStream(fileName );
byte[] buf = new byte[16384];
int len;
while ((len = zipStream.read(buf)) > 0) {
out.write(buf, 0, len);
out.flush();
out.close();
out.flush();
out.close();
zipStream.close();
primeZip.delete();
}catch(FileNotFoundException e){
}catch(IOException e){
}I put close() for ZipFile object which is zf.close() befoer I delete the zip file resolve this issue.
Thanks. -
Why are there two separate packages for extra/zip and extra/unzip?
The package info for both indicate that they come from the same website. It seems strange and inconsistent with what is normally expected. For example, there are not separate packages for gzip and gunzip or bzip2 and bunzip2.
1. They are represented as distinct programs on the website.
2. They are developed independently, they even have different version numbers.
3. Although the binaries are very small, some people only need one of them. I never create zip files, but I have to unzip them often.
4. They seem to have different dependencies. -
Is it possible to download a zipped file without unzipping it?
I need to download zipped Joomla extensions from the Joomla website and then upload them to my LINUX website, via my Macintosh. The problem is that my Macintosh unzips the files. I then have to compress the files again before I upload them. This usually works without a problem but it'd be safer to download the file without unzipping them. Is there a way to do this? I can't find any Preference for zipping or compressing, or any documentation about controlling compression in Mac Help.
try Safari > preferences > general. untick +open "safe" files+ ...
( *click on image to enlarge* )
JGG -
Hi!
been working on this for hours... Help!
I am trying to get Overdrive set up on my computer so I can eventually get it set up on my boys' ipads.
Our library: http://www.bismarck.org/index.aspx?nid=23 has Overdrive so that we can download Audio books and ebooks. I got the ebook set up no problem, but the audio book that I download, creates some kind of zip file with a .CPGZ extension that will simply not unzip. I read on the Apple Support Communities to download The Unarchiver, but that does't work either.
I don't want to download all this stuff on the boys' ipads until I can be sure I know how to do it right and not muck up their ipads.
I'm hoping it is something simple... Thank you!!Corrupted file, either during download or from origin, Incomplete download, stopped at 99% done or similar.
Certain web browsers mishandling a file during or after the download process.
Try downloading with a different browser.
Also you can try and use the Applications/Utilities/Terminal.app , the unzip command:
# unzip path/to/zipfile.zip
One way in terminal is type the command unzip and drag your file to the terminal window and release.
Return -
How to remove zip file after unzipping the file
I'm trying to delete zipfile in my program after unzipping the file. any suggestions? provide any sample code.
Thanks
kishoreFile.delete()
Maybe you are looking for
-
How to return all field names in a table
How do you write a report to return all field names in a table? I prefer the field names in a column. Thanks Wayne
-
Ok wy iTunes got deletes off my computer and I had an iPod 3 now I have an iPhone 4 And I Reyes to buy some music using the same iTunes account but it says purchased and I'm just wonderin if there is anyway I can get the music I had on my iPod to my
-
How do I restore my iPhone? It has iPod touch information on it, like old pictures that I had on my iPod touch (which I don't use anymore), and the keyboard has changed. Before I could use special icons and symbols, and now it's just basic (no shapes
-
Oracle Materialized view with xmltype data type
this the table having in db1 i need to create materialized view db2 for this table i have followed below steps.. create table WORKSHEETMASTER METHODID NUMBER(10), WORKSHEETCODE VARCHAR2(50 BYTE) not null, WORKSHEET SYS.XMLTYPE); create materialized v
-
Whatsapp message and photo albums problem
Good day, How can I transfer whatsapp message from the old iPhone to new iPhone? In addition, I have created many photo album using the phone itself, each time after I sync, only photo show up in the new iPhone and not showing any album created previ