925 Chipset & 64Bit Intel CPU

It seems that Intel CPUs do support the 64Bit version of XP........
Below is some links.........
Intel EM64T
Then this link..... I thought yeah future Processor, but was I shocked
775 CPU's
I did find by chance, when looking on Microsoft at the 64Bit version of XP and saw processor support for Intel EM64T.....
If nothing else, it shows what is NOT being put into media and what is.........
Del UK

EMT64 available October
Less relaible sources(Other mainboard [STRIKEOUT]bodgers[/STRIKEOUT] makers), say 915 will have the extra to show support.
The 925 will support now. The Xeon Emt64 are here now, but the 775 will be October.
Also watch out for THE Via 880 chipset going QUAD channel mem.....especially with AMD upping the stakes yet again.....
Del  X-((98

Similar Messages

  • 64bit intel cpu in a 32bit cpu laptop will it turn on?

    i got the sl7pk 2.8ghz pentuim 4 cpu and i got the ze4546sr and compaq 2190 ok the compaq i put a 32bit
    intel pentium 4 2.66ghz cpu 533mhz fsb and windows see it as a desktop when i do shut down it shuts down and at the end a screen comes up it is now safe to turn off your computer,ok but i need to increace the cpu voltage cause its low and cpu clock speed is 1.99ghz so i need to find out what cap to take off and make a solder bridge, and the 2.8ghz 64bit cpu can i put it on a 32bit scoket 478 , i want to modifie all my laptops all but two are 2.4ghz celeron cpu and i got two 2.8 ghz 64bit cpu and one pent 4 2.93 ghz d cpu and celeron 2.2ghz 64bit cpu,
    so you san jose people tell me something good awha
    im from sanho also but im not at home right now
    im in seattle and hook it up man

    Sorry to say that sounds like an Motherboard problem you should have a technician check it out. It really sounds similar to what my hp laptops sent me through seems i had burnt out some part in them both.

  • Flash player 10.3.181.14 requires intel pentium 4 2.33ghz,I have  intel CPU T2080@1.73ghz processor

    I am trying to use Adobe Flash player at home to simply surf the web. For a long time I've been getting prompts to update Flash Player and however much I updated it the prompts kept on poping up. This got so frustrating I decided i'd try to fix the problem once and for all. So I checked the system requirements Adobe recommend for the update I had been downloading and found one of the minimum requirements to be an intel pentium 4 2.33ghz processor. I checked my system and I have only an intel CPU [email protected] processor. My question is, does this explain why I am having so many problems? I've tried to download an earlier version of Flash Player but I always get redirected to the 10.3.181.14 version. How it has come to this I am not quite sure but I must admit I have removed the Flash Player from my computer at the moment and I'm worried that it was a mistake because will I ever get a working version again? I am running Windows Vista 32bit and Internet Explorer 8 32bit. I am out of my depth so please be gentle!

    You might have better luck if you post your question in the Flash Player forum...
    http://forums.adobe.com/community/webplayers/flash_player

  • Virtual PC v7.0.2 and macbook pro with intel cpu

    Is Microsoft Virtual PC v7.0.2 compatibble with intel cpu's?
    thanks

    Virtual PC for Mac will only work for the older PowerPC Macs.
    For the newer Intel Macs look at either Boot Camp from Apple <http://www.apple.com/bootcamp> or Parallels <http://www.parallels.com>. The performance of Windows with either of these solutions far outweighs Virtual PC.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

  • MacBook Pro 2.2GHz -- which exactly Intel CPU is in there?

    I've been reading the wikipedia on the differences and details on the Core Duo and Core 2 Duo CPUs and it made me thinking what model number of Intel CPU have I got in my system?
    I've checked the specs both on the product pages as well as in the support section and they only read that it's got the Intel Core 2 Duo 2GHz CPU, no details.
    Does anyone know? Can anyone with MBP 2.2Ghz system and Windows on it run CPUz and report back here with the CPU details?
    thanks!

    I believe, on Apple's specifications for the MacBook Pro, it says what kind of processor it is...if it doesn't, there's surely ways to find out.
    That's how the poster found out what kind of computer processing unit is packaged with the MacBook Pro. He then linked you after finding the processor on that page. It's quite simple, really.
    Google It you may find some info.
    -benny

  • Do sun have JDK 1.4.2  for windows 64bit,PS:cpu is Xeon

    my company's server is 2003server 64bit,and CPU is Xeon.
    now we need JDK' version is 1.4.2
    please help me!
    PS:CPU is not Itanium!!!
    thanks!

    JoachimSauer wrote:
    jwenting wrote:
    there are still valid reasons to run 1.4.2.I didn't say there aren't.
    My impression is just that instances where people are simply afraid to update or don't want to upgrade are a lot more common than those valid reasons.
    your customers not wanting to upgrade for whatever reason (whether valid or not) gives you a very valid reason to not upgrade.
    For example if you're running Oracle Container 4 Java 10.1.2.0 you will have to run a 1.4 JVM.
    Of course that Oracle product is very old as well and either out of support or soon to be out of support.In my opinion running end-of-life software should be considered a breach of professional conduct. It's irresponsible. And if the company hasn't got a strategy to update its legacy code or at least get professional support for old versions, then that's another irresponsible approach.We warn them, they ignore the warnings. And in the current economic climate we can't bee too picky about what projects we take on (and (potential) customers are very tight with their budgets and often don't have the money to spare for any support or upgrades).
    We encounter customers wanting to upgrade from Oracle 8 to 9, both are out of support... Tell them to go to 11 (which is the current production version) and they go to someone else who will do the job.

  • 2.1GHz PowerPC G5 to intel cpu?

    Is there anyway to change the 2.1 GHZ PowerPC G5 to an intel CPU?

    Clone your hard drive at least twice:
    http://www.macmaps.com/backup.html
    Read how to sell a Mac*:
    http://www.macmaps.com/selling.html
    Make sure all your applications support Intel CPU and/or Mac OS X 10.7. If they don't all support Intel CPU, but most do, you'll probably want a used or refurbished Mac* that supports 10.6.8 or earlier as is listed on the bottom of:
    https://discussions.apple.com/docs/DOC-2455
    If they do all support the Intel CPU and Mac OS X 10.7 as is indicated by my tip below:
    https://discussions.apple.com/docs/DOC-2465
    Either way, if you are migrating to an Intel Mac, read this tip on migrating data:
    https://discussions.apple.com/docs/DOC-2295

  • Problem installing Palm Desktop 4.0 on Mac (Intel CPU + OS 10.5.6)

    Hello,
    When installing Palm Desktop 4.0 on my Mac (MacBookPro= Intel CPU + OS 10.5.6), the installation fails when trying to install the last files (.prc files). I cannot find any installation log to know what the problem exactly is. If I try anyway to run the software, Palm Desktop seems to run OK, but HotSync Manager fails (error related to "PPC-lib").
    The problem is I am still using my old but fine Visor, so I don;t think I can install a more recent version of Palm Desktop.
    Thanks for any help  !
    Post relates to: Visor Deluxe

    Hello Walter and welcome to the Palm forums.
     For such a new Mac, I'm fairly certain, you are going to have to use Palm Desktop 4.2.1 Rev D or later (I believe that Rev D is the latest) for Mac OS X.  You can download Palm Desktop 4.2.1 Rev D for Mac OS from the Palm website.  You may need to pick a newer Palm handheld to gain access to the download link.  If that is the case, pick the Tungsten T5, it should require Palm Desktop 4.2.1 Rev D.
    Alan G

  • Mobile INTEL CPU supported in MEGA 651 ?

    Hello,
    will it be possible to insert a Mobile INTEL CPU, i.e. Mobile Intel® Celeron® processors, SL6VH, 1.3V, 1.80 GHz, 400MHz, 478pin PPGA, in the MSI MEGA 651 ?
    I t seems the socket and the bus speed is ok.
    But will the BIOS support this kind of CPU ?
    Thanks for help.
    Regards Bernd.   

    I ve got an 1,7 Ghz Mobile Pentium 4-M in my Mega 651, it definitly runs cooler then my older 1,7 Ghz Celeron, wich had 128 kb cach, not like pentium 4M wich has 4 times more cach (512 kb). Without modding the CPU, it runs at 1,5 (1,48) volt. Making the "bent pin trick" it runs on an extremly low volt - 1,08 (1,10) volt. This means lower heat output, then it's rated 30 Watt (wich it has at 1,3 volt, and 1,7 Ghz). The CPU now runs at 1,2 Ghz. At 1,1 volt I can overclock it to 1440 Mhz, but it runs safe, only at 1404 Mhz (at 4x117 mhz fsb). At 1404 Mhz I can even look at High definition video with PowerDVD. I also tried the 133 fsb trick, , isolating the Pin AD6 with nail polish, and it works fine at 1,48 volt and 1596 Mhz, and overclocked even at 1,7 ghz (142 Mhz fsb). But of course in this case the processor generates more heat. At 1200 MHZ it works without turning on the CPU fan, wich turns on only after hevy cpu loads (for example looking on DVD-s) You can browse the internet without the fan would turn on - you can hear only the sound of the hard disk, and the psu fan. I have got only one tiny problem, somtimes when I turn on my PC, after booting, the cpu fan does not stops, I dont know why, and it runs constantly, until I stop with Speedfan. I dont know why is doing this. Not allways, only sometimes, and I cant find out why...

  • How do I update Intel CPU microcode.

    I have got msi  z77a gd65 motherboard. How do I update Intel CPU microcode.
    01. Update CPU Microcode for Ivy Bridge E-1 and L-1(M12306A9_00000019).
          &Update CPU Microcode for Sandy Bridge Q-0 and D-2(M12206A7_00000029).
    Global Moderators help me.

    Quote from: flobelix on 29-July-13, 05:33:53
    What do you want to do? The 2500K is supported by the Z77A-GD65 out of the box no matter which bios version it is at.
                 You may look at this page  http://www.station-drivers.com/forum/viewtopic.php?f=32&t=4575

  • XEN VM - Applying Intel CPU microcode update fails

    Hi,
    I just installed OEL5 and I get the following message on boot:
    Applying Intel CPU Microcode update: FATAL: Module microcode not found.
    ERROR: Module microcode does not exist in /proc/modules [Failed]
    From my quick Google search this is caused by the XEN virutualization. If you you get the [Failed] message then you have a serious problem.
    Any ideas?
    Thanks
    David

    The same happens booting a xen linux kernel on original RHEL and derivatives (such has centos)
    I just ignored it, and AFAIK there's no problem with xen.
    Just my 2 cents.

  • Bootcamp NON intel CPU's-use all programs

    Does Bootcamp Support NON intel CPU's like my G4 IMAC? and Can it use ALL of the windows programs?

    http://www.apple.com/support/bootcamp/
    Only Intel when talking Macs, no PowerMacs or G4 etc.

  • Applying Intel CPU microcode update

    Hi,
    after creating a virtual machine from OEL template, when the I connect to that virtual machine OEL booting process fail to Applying Intel CPU microcode update.
    ghassan Hallaq

    The same happens booting a xen linux kernel on original RHEL and derivatives (such has centos)
    I just ignored it, and AFAIK there's no problem with xen.
    Just my 2 cents.

  • MacBook Intel CPU upgradeable or removable?

    Is MacBook Intel CPU upgradeable or removable?

    Look like the upgradeable processor is not Apple main business, it could happen later on, but from third party like sonnet, etc.
    Once they could figure it out the posibility to upgrade it to a newer processor, they surely sell it.
    But if the processor is soldered to the logic board than a hack website is probably give you more but risky solution.

  • Intel CPU?

    Hi
    What max. Intel CPU processor can I buy for motherboard MSI MS-7071 (N 1996) and which PC power supply?

    Quote from: Bernhard on 28-June-12, 18:24:39
    You can find all supported CPUs here http://www.msi.com/product/mb/PM8M2-V.html#/?div=CPUSupport  If you can still find these CPUs, is another question.
    From a PSU persepective for your set up, suggest a Corsair CX500.
    Thx, I have: 2 x IDE Hard Disks, 2 x IDE CD/DVD-ROM, 1 x Floppy and Pentium 4, (3GHz, 84W).
    BTW is it Power supply 300-400 Watt not enough to save power?

Maybe you are looking for

  • How do I stop the autoload on QT .mov files on a webpage?

    I've read through http://www.apple.com/quicktime/tutorials/embed2.html already, and here is my code: <OBJECT classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' width="225" height="191" codebase='http://www.apple.com/qtactivex/qtplugin.cab'> <param

  • Error in batch session processing in background mode

    Hi , I am trying to do data transfer using batch session for transaction FD32. Here the batch session is executing when I am processing the session in foreground. Whereas in background mode it is failing. Please check and assit. Regards Kishore

  • Can I merge events under a main title, but still keep subevents titled?

    I have a ton of pictures to organize and would love to know if I can sort events by making a "main" event like "Family pictures" and put all sub-events having to do with family in it.... but I would love to keep the photos I put in it somewhat sepera

  • No. of Channels in a PXI Embedded Controller

    How many DMA channels are present in the NI PXI 8105 controller ? I have read that in NI PXI 7831 r, there are a total of 3 DMA channels, So if I am using 3 such cards I need to have 9 DMA channels in my controller for sending the data to these cards

  • Is there a Combo updater of 10.10.1?

    Usually, Apple offers two versions of OS-X installers. One simple "Updater", and one Combo version. The KB article mentiones (as usual): "Standalone installers are available from Apple Support Downloads." But: I can not find the download link to acce