[925 Series] msi 925xe neo platinum issue

dear guys
i have just assembled my pc with the above-mentioned board but noted discrepancies with other 925-based boards when benchmarkings are performed. I understood that the same problem also occured with msi 915-based board but all seem to resolve with a bios update. When benchmarking are done with pc mark 2004, my ram marks only hit somewhere around 4700-4800, and cpu benchmarkings also are a bit low as compared to other boards with sisoft sandra 2005. Is MSI working on that or i just have to accept all this issues?
thanks in advance
btw, my pc specs: P4 2.8 GHz (FSB 800 HT-enabled), MSI 925xe neo platinum, A-Data DDR II 533 256 MB x2, Seagate 80GBs NCQ HDDs x2 as RAID 0, and Maxtor 80 GB SATA as RAID 0 and Optical drives.

I don't think it's the motherboard fault and its most likely due to the OS and hard drives. I had the same problem when I installed windows 98 and upgraded to windows 2000. I created a slipstreamed windows 2000 CD and installed windows 2000 from scratch and my problems stopped. Originally I was getting scores in 3D Mark 2005 of 4300-4800 and that was the graphics score. After installing windows using the slipstreamed CD I was getting scores of 5600. I think it was a SATA drive issue, which slowed down system and stopped it working as it should. Though you probably have windows xp installed from scratch I thought I would say this anyway as it kind of is relevant even though it's your CPU and RAM you're having trouble with.
You could try changing SATA ports or updating the drivers for the controllers if it's the SATA dirve to blame though I am sure other people will prove me wrong.
Is the CPU showing up at the speed it's supposed to?

Similar Messages

MSI 925XE Neo Platinum 54G Package contents

Hi to every body!
i bought a Nice MSI 925XE Neo Platinum 54G Motherboard but i think that the WiFi should have been included inthe delivery of my tower as on the receip it is stated as a 54g.
Has any faced any similar situation?
unfortunately the Retailer failed to provide me the box of the mother board at the delivery.
Could i, with the board serial number, find if and what was included in the retail box i suposely bought?
Anyway

thanx for the attetion Maesus
i bought my card on mid march for about 200 euros ex-VAT if this can give you an idea,
further more the thing that made me search was that the package was on the shop display and it is written on that a WIFI is bundel with
the serial should be 4C20240535 amoung all tha numbers written on.
thanx mate!

4Gb of RAM in a 925XE Neo Platinum, BIOS report 2.75GB?

Hi,
I've just replaced a dead motherboard in my PC with an MSI 925XE Neo Platinum (MSI-7053)
I needed new RAM for it (old board had DDR-SDRAM) and as it was cheap and the board supported 4GB, I got 4GB.
But the BIOS only reports 2.75GB of available RAM.
CPU is an SL7J8.
Can this be fixed with a BIOS update or something? Or am I stuffed?
Thanks,
J1M.

A part of your physical memory is being reserved by your BIOS, depending on the installed hardware. What's left is for the OS to add to the virtual address space (physical memory + pagefile), usually no more than 3.25 GB for a 32 bit OS. Decrease your pagefile in size to a couple hundred MB, it might change something and you will barely need it anyway...
If it's available in your BIOS, enable Memory Remapping.

MSI K8N NEO PLATINUM BlueScreen Issue! Help!

I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
MSI K8N NEO PLATINUM
ATHLON64 3000+ @2.01 (stock)
SAMSUNG 512MB PC3200 CAS 2.5
PNY MX440 64MB DDR AGP8X
MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
300W GENERIC PS
LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

which drivers are you using?
Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
this way it will stop at the blue screen and get an stop error number
Or view the error log
Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems ->under Tools -> my computer Information-> View Advanced System Information -> View error log
it shows all errors by date migh provide you error numbers ie. 0x000008e

Beware. msi k8-neo platinum have BIG issues!!! READ

Ok so everyone going to buy the msi k8-neo platinum socket 754 beware!
The msi k8-neo have big issues with the inbuild soundsystem wich is crap, maybe they fix it soon i hope so but im not alone having this problem. Some have fixed it with installing the drivers from realtek homepage so do so if you think something is wrong with it.
Second big problem is that the msi-k8neo platinum mainboard doesnt work well with radeon 9800 based card. You can fix this by installing the 4.1 catalyst drivers.
So maybe you want to w8 a little and see if they fix it first. Sofar the support havnt ben replying my mails neither confirmed that there is a problem with this. Im playing rtcw so i had to isntall the old 4.1 drivers, but doing so i couldnt be able to play doom3, wich cuz of doom3 i bought this computer So if anyone has solutions to this problems pls post them here. They have more problems then this but not so big as those (what i know).
Hope the fix them in time
/John

Quote
Originally posted by HvyPetals
First of all, why would anyone use onboard sound? It just takes away from overall system performance. I mean, if you can afford it use an Audigy.
Second I will NEVER buy an ATI card again for the rest of my friggin life. Everyone knows there drivers are as buggy as a south bronx tenement bldg.
I bought my first ATI card in 98 and swore to never be involved with them again. Then I forgot as the years past and bought the 9600 Pro last year and BOY was I sorry. I was immediately beset by problems from install, to constant crashing and BIOS tweaking and ...I know what Im doing! I swore YET AGAIN to never, ever, ever buy an ATI card again. If you value piece of mind stay far away from ATI.
So I scrimped and saved and bought the Geforce 6800GT. Works like a charm.
I can only prey that I dont forget the painful lessons I have learned.
Not that ATI itself is bad, or the people who work there are bad, yada-yada, BUT... stay away from the cards if you dont enjoy pain.
You are just the opposite of me. After I face terrible image quality issues with nVidia drivers back then, I sold my 5800 and gotten a 9800 Pro. Now I swear I will never ever look at another Nvidia card. I still can't understand why a big company like nvidia cheated with their drivers to score higher on benchmarks.

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

"error loading operating system MSI K8n Neo platinum

OK,
System will post, according to MSI Website I have the latest Bios version.
I can boot from CD.
The only odd item is that I am using the HD that I took out of my old computer with windows already on it.
Tried re-installing windows XP. It went through the loading process and then rebooted. Same error message appears.
Also, is 48 degrees normal for idle temp on CPU AMD 64 3400? 36 degrees NB temp ok?
Oh, yeah, I have a floppy installed, CD-ROM, CD RW, all non SATA. Using IDE cables.
Video is Asus V9980 ultra GeForce FX 5950.
MSI K8N Neo Platinum
AMD 64 3400
Hercules 600 W PSU
WD 80gb HD
Generic CD-Rom
Sony Cd-RW
2 x 512 crucial 400 ddram slosts 1 and 2
Asus V9980 ultra GeForce FX 5950 256 TVD
Do I need to clear bios and re-start?
HD is on it's own cable in IDE 1
Cds on IDE 2 shared.
let me know what you think.
The other related posts I read, people were using raid or multiple OS. I'm not.

I had the same issues as you sometimes Windows would install and sometimes it wouldn't the problem was related to ram. I had my ram in slots one and two like you did and I moved the ram to slots 1 and 3 and now the machine is rock solid stable.
I think most of the problems people are having are actually more ram related than anything else.
So try moving the stick of ram you have in slot 2 to slot 3 and see if this solves your problem. This solution is on forums somewhere I am just not sure where.
Take care,
Bob

MSI K8N NEO Platinum Edition memory question

Hi there,
I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
thanks in advance !

Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

MSI K8N NEO Platinum Edition PROBLEM

Hi (my english is not good sorry for that)
I just got my new computer:
MSI K8N NEO Platinum Edition
AMD Athlon64 3200+
Western Digital Caviar 160Gb
PNY Verto GeForce 6800Ultra 256Mb
1GB Value Select pc3200
Levicom 500W
The Problem is that when i start the computer, it boot and die directly no bootscreen what so ever, it boot and die. i dont know what to do plz help me

Make sure you have Both the ATX Wires on.. theres the Big one! (21Pins i think).. and the Small 4Pin Connector both need to be connected.. if you havent done so yet.. Another thing you could do is Take everything out and place it on a cardboard or something appropriate for the mobo.... I think your motherboard is shorting?.. if it's touching your case.. I had somewhat the same issue long time ago.. give it a try..if you want hope it helps..

MSI K8N Neo Platinum & Crucial Ballistix 512MB RAM Problem

I have had MSI K8N Neo Platinum and 1x Crucial Ballistix 512MB RAM for 11 months.
I have had 1x Crucial Ballistix 512MB RAM for 2.5 months, for a total of two.
I have had MSI GeForce 6600GT (NX6600GT-VTD) 128MB AGP for 1 month.
For about 1.5 to 2 weeks, I have been seeing random crashes while playing PC games.
I started a thread on the Hard OCP forums a few days ago. I did not know MSI had forums =)
Rather than re-typing, I may as well just post the link:
http://www.hardforum.com/showthread.php?t=934956
My issue is also similar to this one:
https://forum-en.msi.com/index.php?topic=83799.0
Thanks for the help.

ALL RIGHT, after almost FOUR months my issue is FINALLY resolved.
It is amazing how much time passes when you are hesitant to buy parts unless you are 95% sure it will fix the problem.
OK, here is an update as to what I remember.
I went to BIOS 1.4 and tried many different physical and BIOS RAM configurations (Different seating, different number of DIMMs, different RAM timings, voltages, etc).
I concluded that I could not make my PC 100% stable, but I could get it darn close. With certain settings, such as DDR400, 2-2-2-6, 1T, 2.80V, Aggressive Timing enabled, Memtest failed test #5 every time (this is spec for my RAM). With other settings, such as DDR333, 2.5-3-3-7, 2T, Auto V, Aggressive Timing enabled, Memtest failed test #5 maybe once out of 5000.
I also concluded that the RAM voltage and Aggressive Timing setting was having a big impact. Some settings would not work (failed Memtest) with RAM at 2.80V but would work with RAM at Auto V. Some settings would not work (failed Memtest) with Aggressive Timing enabled but would work with it disabled.
Finally, I started to occasionally get R,G,R,G (Processor Initialization) on the D-Bracket upon cold-start & warm-start, which suggests a PSU issue:
https://forum-en.msi.com/index.php?topic=76972.msg542545#msg542545
That pushed me over the top, and I decided to buy a new PSU (TG-480-U22) and a new SATA HDD (WD2500KS) just because.
Problem solved. Thanks for all the help.
I will continue to buy MSI in the future just because of these forums…and a good product of course!

Msi k8n neo platinum ps2 keyboard problem

Hi. I'm having issues with my msi k8n neo platinum motherboard. I've read about 50 posts on these forums regarding the supposed ps2 keyboard issues with recent msi boards. However none of them seems to address my current situation.
Like many others, when I power up my system the cpu fan spins for like 3 seconds then everything comes to a halt.
I tried many things to get my system to boot and the only thing that works is plugging my ps2 keyboard into the ps2 mouse port and moving the ps2 mouse into a usb port with an adapter.
It seems there's no hope for fixing the problem other than RMA'ing, but I thought I would add to the pile of complaints stacking up against the MSI boards.

if u had read the threads a little more u might have found a solution that seems to have worked 4 many - a usb keyboard usb Keyboard if u go this route dont forget to enable usb kb in bios
Edit: This Thread Summarises the situation PS2 keyboard/mouse causes random shutdowns or doesnt work

MSI K8N NEO platinum and MOBILE chips

I just found out a problem with MSI K8N NEO Platinum.
I recently upgraded my cpu from Clawhammer DTR 3200+ 1.5V to Clawhammer Mobile 3400+ 1.4V (hoping for better overclocking). To my surprise the mainboard can no longer raise the VCore voltage over 1.45V (it doesn’t matter if I select in the bios 1.5 or 1.55V). The only working option is raising de VCore by 3.3% 5% 8.3% 10%, resulting in a maximum VCore of 1.45 + 1.45 x 10% = 1.6V
I did some googeling and found there is a VCore issue with the K8N NEO and mobile chips, although DTR chips are fully supported (working VCore and multiplier adjustments).
I am using the latest beta bios 1.56B (moded by Pinochio)
Did any of you found a way to resolve this problem? IT IS DRIVING ME INSANE!!!

Bad post...

Bios from my Msi k8n Neo Platinum (socket 754)

Wich is the last beta bios from my Msi k8n Neo Platinum (socket 754) ?
And where download?
Thanks

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

New Bios For MSI K8N Neo Platinum [ 1.55]

NEW BIOS FOR MSI K8N Neo Platinum !!!!
BIOS 1.55 FOR K8N
AND CLICK
Apothikeusi/Emfanisi (Greek Language )
Your CPU temperature is in the safe range. Please rest assured. If you are
willing to, would you please flash BIOS to the version 1.55 verifying? We
send it by attachment. As to how to flash BIOS, please refer to the word file
in the attached file. Please kindly inform us of the results. Thanks for your
cooperation.
In addition, please enter BIOS to load optimized defaults after flashing BIOS.
Please feel free to let us know if you still have any further issues or inquiries.
Best regards,
MSI Technical Support

OMG !!!!
Something is really weird about this bios !!!!
I can't boot overclocked from bios even at 220 HT, and at the beginning i was REALY disapointed.
Then i set it to optimize defaults ( and yes i did the whole flashing thing ) and i am now IN WINDOWS with my cheapo Kingston Value that did MAX 230 with problems NOW AT A WOOPING 237 Mhz and still going UP !!!!
OMG OMG....
If only i can get it to boot from bios.Seems pretty stable in windows even at 237.
Really strange guys.I thought 230 was my memory limit....
Gonna try higher and let you know.
P.S. this bios seems to like Kinston Ram....Value at least

Msi k8n neo platinum - The 1394 delete from bios device list

hi.
the line where 1394 was is now empty , i try everything i flash the bios and stuff
no luck for me???
it look like the 1394 onboard conroller is dead?

A thread here , from when 1.56 appeared:
MSI K8N Neo Plat Beta Bios 1.56
and when 1.55 appeared:
New Bios For MSI K8N Neo Platinum [ 1.55]
Seems to me that the 1.5x series were focused on chipset timings and ram .
Another thing is that i can boot from a usb pen with this one .(never got it to work with others) .
Beta bioses don't come with a changelog , they leak out . So any complete
list of changes is not possible to provide.

[925 Series] msi 925xe neo platinum issue

Similar Messages

Maybe you are looking for