925XE Neo-54G Installation problems

Hi
I'm new to the system build process and am having problems with the initial build that I hope someone here can help me with
System spec:
MSI 925XE Neo 54G motherboard
MSI RX800 PCI Express graphics card
Intel p4 3.6 GHz processor
Enermax Noisetaker 2 600W PSU
Corsair Valu Select 1Gb DDR2 PC4200 memory (one simm in DIMM1)
When I switch on the power all of the fans spin up and then slow down again and this cycle continues indefinitely with the power startinga nd then cutting again.
What have done wriong? Is this an incompatibility between something? It makes no difference if the DVD or hard disk opr connected.
Help! any suggestions?
Best regards
Slotraccoon

Hi Assaf
Thanks for the suggestion - however it hasn't helped. I have tried booting out of the case on a non-conductive surface to no avail. It seems to make no difference if everything or nothing is connected. The power comes on and spins up the fans, etc, and then stops again and repeats over and over. I have changed the PSU so it isn't that. I have tried with all of the fans removed and with the memory and graphics card removed - same result. Does this suggest a faulty motherboard?
Cheers
Slotracoon

Similar Messages

MSI 925XE Neo Platinum 54G Package contents

Hi to every body!
i bought a Nice MSI 925XE Neo Platinum 54G Motherboard but i think that the WiFi should have been included inthe delivery of my tower as on the receip it is stated as a 54g.
Has any faced any similar situation?
unfortunately the Retailer failed to provide me the box of the mother board at the delivery.
Could i, with the board serial number, find if and what was included in the retail box i suposely bought?
Anyway

thanx for the attetion Maesus
i bought my card on mid march for about 200 euros ex-VAT if this can give you an idea,
further more the thing that made me search was that the package was on the shop display and it is written on that a WIFI is bundel with
the serial should be 4C20240535 amoung all tha numbers written on.
thanx mate!

[925 Series] msi 925xe neo platinum issue

dear guys
i have just assembled my pc with the above-mentioned board but noted discrepancies with other 925-based boards when benchmarkings are performed. I understood that the same problem also occured with msi 915-based board but all seem to resolve with a bios update. When benchmarking are done with pc mark 2004, my ram marks only hit somewhere around 4700-4800, and cpu benchmarkings also are a bit low as compared to other boards with sisoft sandra 2005. Is MSI working on that or i just have to accept all this issues?
thanks in advance
btw, my pc specs: P4 2.8 GHz (FSB 800 HT-enabled), MSI 925xe neo platinum, A-Data DDR II 533 256 MB x2, Seagate 80GBs NCQ HDDs x2 as RAID 0, and Maxtor 80 GB SATA as RAID 0 and Optical drives.

I don't think it's the motherboard fault and its most likely due to the OS and hard drives. I had the same problem when I installed windows 98 and upgraded to windows 2000. I created a slipstreamed windows 2000 CD and installed windows 2000 from scratch and my problems stopped. Originally I was getting scores in 3D Mark 2005 of 4300-4800 and that was the graphics score. After installing windows using the slipstreamed CD I was getting scores of 5600. I think it was a SATA drive issue, which slowed down system and stopped it working as it should. Though you probably have windows xp installed from scratch I thought I would say this anyway as it kind of is relevant even though it's your CPU and RAM you're having trouble with.
You could try changing SATA ports or updating the drivers for the controllers if it's the SATA dirve to blame though I am sure other people will prove me wrong.
Is the CPU showing up at the speed it's supposed to?

925XE Neo Upgrade to VISTA

Hi
I have a 925XE Neo mainboard and TD256E RX800 Graphics card and I am preparing to upgrade to Vista Ultimate. I run a pair of Sata HDDs using the Intel RAID controller as a mirrored pair.
Is there anything I need to do before insertting the Vista DVD and hoping for the best. Like upgrade to a particluar BIOS for either the mianboard or the graphics card. I read that there are problems with the RAID drivers is there something specific needed?
I see a download area for the 925X Neo but not the XE - is there any difference?
Any advice would be appreciated.
Best regards
Rob

Quote from: Slotraccoon on 11-February-07, 01:21:57
Hi
I have a 925XE Neo mainboard and TD256E RX800 Graphics card and I am preparing to upgrade to Vista Ultimate. I run a pair of Sata HDDs using the Intel RAID controller as a mirrored pair.
Is there anything I need to do before insertting the Vista DVD and hoping for the best. Like upgrade to a particluar BIOS for either the mianboard or the graphics card. I read that there are problems with the RAID drivers is there something specific needed?
I see a download area for the 925X Neo but not the XE - is there any difference?
Any advice would be appreciated.
Best regards
Rob
Hi,
You may need the Intel RAID driver on floppy or CD before install Vista. The same driver for XP can be used for Vista. You will be able to see the harddisk after installing the driver. Otherwise, the harddisk will not appear as part of the selection for Vista to install. I did a clean install rather than upgrade and this is the observation I have seen during instaling Vista on my 875P.
Regards,
MJ

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Installation problem for Java EE 5 SDK Update 2

Hi ,
I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
Thanks in advance.

For the difference between Java EE and Java SE read here:
http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
http://forum.java.sun.com/thread.jspa?threadID=738559
Andrea

PPStream installation problem on Windows 7

I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

Installation problem w/Vista

Boot Camp/Vista installation problem
MacBook 2GHz Intel Core 2 Duo, 2GB RAM, Snow Leopard 10.6.2.
Trying to install Windows Vista Home Premium using Boot Camp.
Started Boot Camp Installer and created 32GB partition. Inserted Vista disk as instructed and clicked on Start Installation.
Black screen appeared looking like this:
1.
2.
Select CD-ROM Boot Type: _
That last underline was flashing, waiting for input.
First off, I don't know what to type in, but . . .
The keyboard appears to be disabled because no keystroke registers, nor Return/Enter. Even pressing caps lock or num lock fails to register a light on those keys.
The only way out is to hold down the power key until shutdown, then restart with Eject key depressed to eject Vista disk.
Any suggestions would be appreciated.

Hi RebelGood,
have a look here http://forums.macrumors.com/showthread.php?t=467704 for instructions/solution.
Basically you have to make yourself a copy of your Vista disc using the files of that disc and a programm called oscdimg.exe plus a burning program.
And it had to be done on a Windows PC or in virtualized Windows (using Parallels/Fusion/VirtualBox) on your Mac.
Regards
Stefan

925XE Neo-54G Installation problems

Similar Messages

Maybe you are looking for