9300 internet is not working at all.

My internet and bbm and apps that use internet were working perfectly fine and I've had the phone for nearly 2 years, but a couple of days ago they just stopped working. I can text and ring like normal but my internet isn't working. I've switched on my wifi and even when I connected it to my house wifi it still didn't work. I've tried going into the host routing table screen but there are loads to choose from! One is in bold which I'm guessing I'm supposed to be connected to and I've tried registering it and rebooting and it says registration message sent but it still doesn't work! I really don't understand and would really appreciate some help asap!! Thanks!

Hello,
ManishaJ wrote:
I've tried registering it and rebooting and it says registration message sent but it still doesn't work!
Given that result, you need to ring up your mobile service provider for formal support. Only they can look "behind the scenes" at their systems to determine why your BB can no longer properly communicate with their network.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Internet does not work at all.

    Hello, I have recently installed Windows Technical Preview on  my Asus laptop. I found that after I updated it from Win8 to Tech Preview, it has NO internet connection. Sure, I can connect using WiFi and it connects fine, but it brings up either a proxy
    error or a general internet error. Please help me! If you need any more specs, I will be happy to provide them.
         -Adam

    Hi Adam,
    We need more error information about your problem.
    Did this issue just occur with wireless connection?
    What’s the exact error message?
    If you are in domain environment, do you have any proxy setting?
    To find a reasonable cause, if you got a yellow exclamation mark on the internet connection icon, you can run the troubleshooter:
    Alex Zhao
    TechNet Community Support

  • TS5213 My internet sharing is not working at all. I turn it on and it shows no sign of being activated and my other devices don't even show its signals.Help!!

    when i turn my network sharing on,it shows the green sign but the wifi sign doesn't change to show any sign of internet sharing. i'm trying to share my wifi from my laptop to my iphone(i can't connect my wifi directly to my iphone for other reasons). my iphone also doesn't show any wifi signals from my laptop. i bought my mac new and updated it to OS X mavericks.help please.

    Help Tahlia wrote:
    It's not working at all ...
    See Here for  >  Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430
    More Info here...
    https://discussions.apple.com/message/19521062

  • My ipods internet doesnt look how it should , and my app store will not work at all , should i bring it to the apple store to see what they say ?

    my ipods internet doesnt look how it should , and my app store will not work at all , should i bring it to the apple store to see what they say ?

    What do you mean by "my ipods internet doesnt look how it should"?
    What happens when you try to use the App store? Error message?

  • Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

    OS: Ubuntu 9.0.4
    Browser: Firefox 3.6.10
    upon updating to firefox 3.6.10, java does not work at all.
    websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
    i can give the folder of bookmarked pages i tried.
    how to do that on here, i've yet to see if possible.
    i can even give saved text from the terminal concerning certain attempts.
    when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
    i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
    i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
    oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
    i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
    i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
    i've tried installing Java for my sys direct from it's site. nada.
    now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
    until then many sites a regularly use are totally useless to me on this fast puter.
    the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
    so, is there anyone at all, who knows any for-sure working fix for this problem?
    thanks muchly :^D
    p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
    i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
    sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • Macbook Pro 10.7.5 internet will not work. HELP!!! Ethernet and WIFI both say connected but still no internet.

    I have a macbok pro running 10.7.5. My internet has always worked on it but I decided to try changing my router set up - the set up didn't work so I reverted back to the original setup that had previously worked.
    Now, I have an Imac running tiger - I can connect to the internet via WIFI or Built In Ethernet with no problem.
    When I try to connect to the internet on the Macbook Pro running osx 10.7.5 my internet will not work
    Safari Says (You are not connected to the internet) and Google Chrome says (Page is Unavailbe) and lists some trouble shooting options that I tried.
    When I go to System prefrences > Network my WIFI and Ethernet both say "Connected" and have a green light next to them.
    I have tryed deleting the connections and starting new ones and I have even tried deleting the Location and starting a new one.
    Nothing works - no matter what I do, even know the WIFI or ETHERNET says Connected, the internet will not work on the Macbook Pro.
    The Internet works fine on my Imac and I have tried everything such as swaping cables but there doesn't seem to be a problem with my internet
    or with my router - it all works fine with my Imac running Tiger.
    Can anyone help me get my internet working on my Macbook Pro again? Any ideas?

    Hello ASGR.SYS amd WahWar,
    I tried both of your suggestions and neither of them worked.
    ASGR SYS - When I tried it your way i got a message saying that the that the diagnostic couldn't repair the problem. It shows the thw WIFI, WIFI SETTINGS, NETWORK SETTINGS, ISP, all turn green. But the Internet and Sever stay red. The thing is, there is nothing wrong with my internet connection as I can connect to the internet on my Imac running tiger, both through ethernet and wireless. When I go to System Prefrences and Ntwork the WIFI and ETHERNET both say "Connected" even know I can't veiw any websites.suggestion
    When I tried WAHWAR's suggestion I get a message that says cannot connect to the WIFI network and then it lists your typical trouble shooting tips. Like Make sure you entered the right password and make sure you are in range of the wireless network
    Again, just to confoirm - My internet connection is working fne both the WIFI and the Ethernet. When I use it on my IMAC running tiger, everything connects as it should and it works perfectly. But when I try to connect with the MacBook Pro, Even know the connections in the Network settings window show up as "connected" the MacBook still seems to think that my internet connection isn't working at all.
    I have tried creating new connections, creating new locations, and I have even gone as far to reset my router and start completely from scratch. The result so far has been the same - the IMAC running tiger will connect - my blackberry and iphone will connect - but the macbook pro running lion will not connect..
    I'd apprechiate any other suggestions

  • After updating my MBP to firmware 1.1 my internet does not work anymore

    Please help,
    A couple of days ago my MBP asked me if I wanted to update to Firmware 1.1 and I did. I followed the steps like it said and when I restarted it my internet was not working anymore. I called my internet provider and they tried helping me but no luck.They gave me the codes and I tried to set up the PPP address and other codes.
    I am using a DSL cable and a Ethernet connection.
    Does anyone know how I could solve this?
    Thanks!

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • Intermittently iphone 6 and 6 plus is wifi connected but internet does not work.

    Hi,
    I have an issue where intermittently iphone 6 and 6 plus is wifi connected but internet does not work. iMessage works though.  Toggling the wifi setting clears
    the issue temporarily but it occurs again.  Running iOS 8.3 now.  This was the case on iOS 8.1 and 8.2 as well. 
    I have tried the typical troubleshooting steps (reboot/reset network settings/disabling location services for wifi/upgrade/etc)
    My router is an EA9200 router with 2.4 Ghz and 5 Ghz.  It is configured with all bands with the same name.
    All other devices in my house works perfectly fine and has no disconnects (ipad/macbook air/tv's/receivers)
    My thought is that iphone 6 cannot handle well the moving around between bands. 
    Any thoughts or suggestions would be greatly appreciated.
    Thanks,
    David

    Have you tried to reboot your router by turning off the power (you may have to unplug it from the power source), then waiting about 30 seconds, then turning it back on?  This seems to solve a lot of problems.

  • I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

    I connected my ipod touch 4g wi-fi with laptop ad hoc network....it's showing wi-fi signals but internet is not working...what is the problem in that can anyone help me...inadvances thanks

    my laptop is Windows 7 and ip is this
    192.168.102.12
    255.255.255.0
    192.168.102.1
    DNS
    192.168.254.2
    192.168.254.3
    in ipod touch 4g is DHCP and its showing
    ip address 169.254.192.139
    subnet mask 255.255.0.0.
    remaining all blank

  • Internet is not working on cellular data after updating 8.0.2 in iphone 5s , wifi connectivity is fine , but no internet connection error message is start blinking even after cellular data is on , please help .

    I am using iPhone 5s , internet is not working on cellular data even after it is on , wifi is working properly . Please help apple team.

    Hello Mario:
    I'm actually surprised that Apple continues to push out 8.02 without addressing these issues. The problem will only anger more users and certainly finger-poking at Airplane Mode isn't the answer. This is an iOS8 code problem and no amount of 'resetting' is providing a reliable fix/solution that sticks.
    These issues with loss of cell connectivity, apps that have lost functionality, etc., which are all directly associated to the arrival of iOS8, are so widespread in the user community and pervasive within individual iPads that it's clear there are significant fundamental problems with this release. Given the problems are so blatant, it's fair to ask the question of how they got by the Apple validation team.
    What is the status at Apple on rolling out a fully V&V'd version to resolve this?  Respectfully, when it comes to some of my more useful apps, my personal iPad has become a paperweight. The user forums are full of these iOS8 complaints for several weeks and there doesn't seem to be a competent answer from Apple.  Even a "We're aware and we're working on it" would be well received.
    Any hope that you can provide will be appreciated. (I'll be monitoring the thread on my Dell laptop because, well, my iPad is i-Inop!).
    Thanks!

  • My Macbook Pro doesnt seem to connect to my Belkin wireless router. It is connected but the internet would not work. any suggestions?

    hey guys. I am having trouble with my internet. My MacBook Pro seems to be connected with Belkin wireless router, but the internet would not work. We recently changed the router so its pretty new, and it used to work on my HP laptop. Although there were some problems, it still worked. But now, the internet works and stops suddenly, and then works again.
    I would love to hear some suggestions to get rid of this.
    Thanks
    Kiran

    If you have not already done so, read the troubleshooting section in Belkin's user manual, contact their customer tech support by phone or go to its website.  Please detail all you have done to resolve your issue.  Need this information so that the users can avoid the "been there, done that" scenario type responses.  This is to avoid repeating the troubleshooting you may have already tried.  Thank you.

  • S60 v3 fp2 destinations not working in all applica...

    hi all
    I have an n79 and i have noticed that the new access point prioritization using the destinations feature  in s60 v3fp2 does not work in all the device applications. e.g. the share online app does not see the internet destination but my access points (3G, WLAn...) so I need to manually select the access point. Is this an n79 bug?
    rrgards

    I too am frustrated by this.
    It works great with new apps (such as the internal Web Browser).
    *some* other apps seem to show a "default" access point, which actually uses the "destination" group you "mark as default" in the connectivity menu
    both these are great.
    Then there's other apps which only show individual APs and no "default".
    I struggle to see why the implementation couldn't have made a virtual AP available via the "old" interface (for old apps). There are already 3rd party apps that do this, including many VPN clients as well as "psiloc connect" (see http://connect.psiloc.com/ ) -- but sadly that isn't available on FP2.
    There's so much about the N96 that's "nearly there" but so frequently is let down by a lack of consideration of the end user experience. Examples include
     - battery life (could have been 30-40% more for the sake of ~1mm)
     - Access points (as above)
     - removal of wifi client
     - sluggishness of response

  • Shockwave flash plugin not working at all!! HELP

    So, here is my problem, I have windows 8.1 64bit and running the latest mozilla firefox.
    I've had a lot of problems with flash player (32bit), videos not working properly, loading very slow.. (i have fast internet, working good) then i updated flash and it totally stoped working.
    Resetting Firefox does not work for me. Flash player is not working at all, so i had to uninstall it. i uninstalled both flash player and shockwave player. i tried having only flash player - still not working.
    I've already tried these too:
    -Uninstalling and re-installing flash player
    -Uninstalling and re-installing in Safe Mode
    -Turning off hardware acceleration in both Firefox and flash player
    -i have updated all drivers on my computer
    Still not working at all! WHY?

    This add-on will prevent Flash from running on the web page until you want.
    '''[https://addons.mozilla.org/en-US/firefox/addon/flashblock/ Flash block]''' {web link}
    Never be annoyed by a Flash animation again! Blocks Flash so it
    won't get in your way, but if you want to see it, just click on it
    If you have problems with current Shockwave Flash plugin versions then check this:
    * see if there are updates for your graphics drive drivers
    '''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
    * disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    '''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
    * disable hardware acceleration in the Flash plugin
    '''https://forums.adobe.com/thread/891337'''
    See also:
    * '''http://kb.mozillazine.org/Flash#Troubleshooting'''
    Notice, Adobe just updated the Flash Player '''v16.0.0.257 https://www.adobe.com/products/flashplayer/distribution3.html'''

  • I have a MackBook Pro I updated to Maverick and now my internet won't work and all my programs freeze and I have to restart my computer.

    I have a MackBook Pro I updated to Maverick and now my internet won't open and all my programs freeze and I have to restart my computer. The only program that doesn't freeze is Microsoft Word.

    Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
    To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
    When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
    After completing the above please determine if the problems also occur in "Safe Mode":
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

  • Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

Maybe you are looking for

  • Nomad Jukebox Zen Xtra -- Intrinsically Safe

    Is this mp3 player intrinsically safe? So far I've been reading over all the information I can find on it, but I haven't found this specifically. Anyone else found anything about this? For example is it alright to use this when you're around chemical

  • How to run 32-bit PS plugin on CS5 in 64-bit Mac processor?

    Hi... I have developed an automation plugin for PS CS 3,4 & 5 using CS4 SDK in 32-bit Mac processor. I wanted to have a single build for all the three versions. I am unable to run my plugin on CS3, it loads, but no dialog comes up on clicking the men

  • FTP file on Appserver to an external system from ABAP

    Hi, I am trying to FTP a file that my program writes to the APPSERVER directory. I used FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT. I am able to connect to the external system and change to the directory where I have to write the file using cd. The

  • Copy Infospoke.

    I have a Infospoke which is FULL load. I want to create a delta for that. How do I copy an Infospoke in a different name and change FULL to DELTA. Thanks in Advance.

  • How to install java 8 on os x yosimite?

    ?