9300 trackpad isnt working

right , my blackberry curve 9300's trackpad has completley stopped working , i cant click or scroll . its happened before and it randomly started working again , but its stuck again and has been stuck for 2 weeks . anyone know any fixes?

Try resetting your SMC and pram. Follow the instructions for resetting the SMC for the type of MacBook you have.
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Similar Messages

MY BB CURVE 9300 LED ISNT WORKING

AFTER UPGRADING MY BB TO OS 6 THE LED ISNT WORKING ANYMORE.. when someone texted me that should be on red light but now its still on green, thats while i need to unlock it first before i can see if someone has texted me... even on facebook,twitter and bbm notifications.. the only time it changes its color is when its low battery, what the heck happened to my bb? i cant find the LED settings on TOOLs... please answer!

Hi
1foxyminx wrote:
Is this a virus?
No.
The Blackberry is designed to be reset by removing the battery whilst the device is powered-on. Leave the battery out for a minute or 2.
See if that resolves the problem. If not then more information will be needed before making suggestions. Please provide as much as you are able of the the following
Blackberry Model.
Carrier Name.
Do you have a Data Plan?
Operating System Version go to Menu > Options > About - it looks like v5.0.0.681
Memory for Device and SD Card Options > Memory
Any error statement or code.
The Exact nature of problem - the more info the better.
When this started and whether it started just after an update or new App download and which App/s theme/s download.
Blackberry Best Advice - Back-up weekly
If I have helped you please check the "Kudos" star on the right >>>>

My trackpad isnt working correctly

When i woke up today my trackpad was just working incorrectly, when i use the left click, it works as it was the ¨enter button ¨ for example in safari when i look for a webpage, for example facebook, when i click the direction bar to start writing, the search starts immediately and i havent even type the webpage yet, other example is here, while im typing this and i make a left click, it takes it as the enter button and this line that indicates where im writing goes down, like this.
im writing, then i use the left click
and now im down.
My trackpad works as the enter button
Can someone tell me what is happening ?
When I restart my laptop the trackpad stills working incorrectly but when i turn it off and then i turn it on it works correctly for a short time and then
starts to work incorrectly again :S
please can someone help me?
Message was edited by: rafasaenz

Try resetting your SMC and pram. Follow the instructions for resetting the SMC for the type of MacBook you have.
MacBook and MacBook Pro
Laptops with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Newer Mac portables
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

My pinch zoom-in and out in my Macbook Air isnt working. Help!

Can someone please help me.. my pinch zoom in and out in my macbook air isnt working. It happened about 2 weeks ago, in the settings all the zoom preferences are checked so i dont know whats wrong with it. The pinch zoom is the only thing not working, the double tap zoom and all the rest of the capabilities of my trackpad are working properly. I called apple but they couldnt help through the phone and wants me to pay $19.99 for a one time help.. Please help!

I've also noticed that the iPhoto zoom is erratic. Sometimes I try to use the trackpad to zoom, but the image just blurs for a second instead of zooming in.
I experimented a little and found that it helps, when zooming in, to make sure that your two fingers are very close together when starting.

Trackpad not working and can't download pictures!

Ok, so my 9300's trackpad stopped working a while ago. I've got myself a new non BB phone, as the support from BB was pretty non existent, however i've taken loads of pics on the 9300 which are saved only on the phone itself, not the sim or card. When I plug it in to the laptop it's permanently 'stuck' on 'charge only', there's no way it seems to move it to 'sync media' or the other one! Is there any way to get the pics off the phone or am i going to lose them all?? would be so much simpler if BB had put 4 little arrow keys on the keyboard, save all the faffing about on this seemingly VERY common fault. Any help gratefully received guys. Thanks. Dave

Hi,
To sync or transfer any file to your computer, you must first download Blackberry Desktop Manager.
This can be done using the folowing link :
http://in.blackberry.com/software/desktop.html
Once installed and opended, connect your phone to the pc and go to options -storage- Press the menu key and enable USB MASS STORAGE MODE.
Your device will be recognised and using media sync, you can transfer your photos and other media on device memory.
If your query is resolved then please click on - 'Accept as Solution'
Thank You.

Keyboard & Trackpad not working but USB are...

Hi - 2007 white Macbook, 10.6.8...
Today the machine appeared to keep freezing completely... after numerous checks (including booting in 10.5), it transpired it was the keyboard and trackpad that weren't responding, not the OS. I know this because I plugged in a USB keyboard/mouse to check and they work fine.
That said, the onboard keyboard & trackpad do work upon boot up for anything from 1 to 10 minutes. Then they just stop responding and I have to resort back to USB again. I can see others who've had similar problems but I can't find a solution.
It doesn't appear to be a fatel hardware error because they will always work on boot up for a limited time. All updates are applied and disc permissions repaired.
Anyone know how to solve this? Appreciate the help - stars all round, thanks.

It doesn't sound like a fatal hardware issue but I think your Top Case Assembly or the connection cable are going bad. The top case is basically the plate containing your keyboard, trackpad, and power button.
The fact that it works via USB basically confirms that, but there is the outside shot that the connector on the Logic Board could be the problem....
Before you take it to an Apple Store, try to boot it up from your software discs that came with your Mac (disc #1, you can do this by restarting your Mac with the disc in and holding down the C key after the startup chime) and see if the problem occurs. If it does, I would have an Apple Service Provider or an Apple Store replace your Top Case for you.If it's okay on the discs, run your Disk Utility on the software disc and reinstall the OS.
I hope this helps!

Keyboard/Trackpad not working in BootCamp

I installed Windows XP SP2 on a BootCamp partition, but the keyboard and trackpad on the laptop doesn't work. Only external, USB keyboard/mice work. Any ideas how to get the keyboard and trackpad to work?

After struggling with this for way too many hours last night, here's a trick that finally worked for me. I found it in the support forums of the excellent WinClone utility (which I used to copy my BootCamp partition from my MacPro to my MacBook Pro).
Basically, following these steps to change the Trackpad ALSO fixed the keyboard. I then had to re-install the BootCamp 2.1 update, which gave the function keys back.
Good Luck!
- Paul
=================
-In device manager notice that in the mouse and pointing devices section there is only the usb mouse that you have hooked up.
-Under Human Interface Devices you have an Apple Trackpad listed change this driver to USB Human Interface Device
-Properties
-Driver (tab)
-Update Driver
-"No, not this time" (radio button)
-Next
-"Install from a list or specific location (Advanced)" (radio button)
-Next
-Dont search, I will choose a driver to install" (radio button)
-Next
-USB Human Interface Device
-Next
-You'll now notice a "Trackpad Enabler" under mouse and keyboard section
-Change the HID device BACK to trackpad driver using the same steps as above- (you will get warnings that the driver isn't "digitally signed" continue anyway and it should then start working.

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

@sanjampet
As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you, the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
Next time when it will work, I will update its firmware.
My macbook was bought in dec2011 so no warranty now.

TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

Hi,
My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
Thanks

While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

My 2012 Macbook Air Keyboard and Trackpad Not Working

This all started last weekend when I installed the latest updates from Apple. The reboot and startup went fine, and nothing happened for a couple of hours, but while I was reading on the Kindle app (fullscreen), the trackpad stopped working. The keyboard stopped working too. Only the power button worked.
Since I received both a Growler and Notification Alert while this was going on, I assume everything else in the background is working just fine, but the keyboard and trackpad simply are not working. I rebooted the machine and it was working just fine. I dismissed it as a one-off occurance.
However the same issue occured a few hours ago, this time with the Safari screen full-screen. Since I was home, I've added a regular USB keyboard and mice, and that's how I'm typing this out on my Macbook Air at the moment
Like I said, this all started after I installed the OSX 10.8.4 updates onto my machine. I've never had a prior issue with the keyboard and trackbar until yesterday.
Any advice?

No one cared enough to answer.

My sound is fine but my mic isnt working. how do i fix or figure out whats wrong with it

Title says it. I just did a clean wipe on my computer and now my mic isnt working on vent or skype, i dont know what is wrong with it. When i go to my sound hardware it says my external mic, IDT high def audio codec is enabled..

Same thing here. Must be update related. Who knows. Tried to go into ventrilo today and nada. Can hear people fine, microphone not picking. In my devices it says my Anvex Virtual Audio is "not available", same with the "IDT High Definition Audio Codec. Now I'm starting to get a little agitated. No diagnostics have come back with a ping on the issue. All settings seem fine. I HAVE AUDIO, as in my speakers are working so **bleep**.
I'm lost. No clue how to fix it. Guess I'm no longer raiding and that if this isn't working I'm going to go buy a Dell and rage beat this piece of **bleep** in the yard. That's right. I am taking 3 years of continual frustration out with HP errors, Vista complications and overall disatisfaction.
If you can fix this problem I will offer you pictures of fluffy kittens and circus acrobats/contortionists. Now fix my ventrilo. lol

Magic mouse and trackpad not working

All of a sudden my magic mouse and trackpad stopped working.
I tried everything, preferences, bluetooth config, but nothing works.
Sometimes in the mouse prefpane, I get the message that the mouse is connected, then after a few seconds it shows disconnected.
In Bluetooth config I get the message that the mouse is connected but the wheel keeps spinning and then it says "connection failed. software configuration and bluetooth may be invalid or are not supported".
Same for the trackpad.
My second mac is also seen, and "connected ?" , but when I try to open the connection it fails also.
System is lion 10.7.5. imac 3,6 Ghz corei5 from 2011.

Found out myself how to solve the problem.
Simply resetting the PRAM and everything was ok.
Thanks anyway

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
Granted, not the same as completely offloading your library to a back-up drive at your location.
Good Luck!

Can I install the online version rather than using my dvd? it successfully installed (up to a point) that way, it just wont accept my serial number for some reason. my dvd isnt working properly.

Can I install the online version rather than using my dvd? it successfully installed (up to a point) that way, it just wont accept my serial number for some reason. my dvd isnt working properly.

If it gets far enough to reject your serial number, it won't help to download it. It must have installed ok.
What is the message you get (DON'T tell us the serial number!!)?
Does it mention a "qualifying product" by any chance?

9300 trackpad isnt working

Similar Messages

Maybe you are looking for