9300i connects but doesn't show up in PC Sync

Hi,
My 9300i connects via Bluetooth and the Nokia PC Suite. I can transfer files no problem, so it is definitely connected.
However, the PC Sync window shows no phone connected, and clicking on the "Select Phone" does nothing at all. It all used to work fine, then suddenly stopped - I've upgrade PC Suite twice, to no avail.
Any clues?
PC Suite v 6.85.14.1
Thanks in advance.

Does this happen with other applications?
Try opening a Terminal window and typing:
killall Dock
Which will restart the Dock.  I bet it shows up.  Other folks have had issues with this and it's usually the Dock has crashed.

Similar Messages

  • IPod Appears As Connected But Doesn't Show Up On iTunes

    I synced my ipod (an 80GB Classic) the night before and when I turned it on later it was like a clean slate; no music, no videos, just some pictures. Well I tried to sync it today but itunes prompted me to restore it to its factory settings because there had been an error. Now when I try to connect it, it doesn't show up on my itunes even though my ipod itself shows connection has been made. I have tried "the 5 R's", have the latest version of itunes and still all I have to show are the same few pictures... I've only had it for a little over two months and have had no problems prior to this, can someone please help?

    Well start with these articles and see if that gets you anywhere...
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    http://docs.info.apple.com/article.html?artnum=305136
    iTunes for Windows: iTunes 7 doesn't recognize iPod
    http://docs.info.apple.com/article.html?artnum=304434
    iPod missing in "My Computer" or in iTunes for Windows
    http://docs.info.apple.com/article.html?artnum=61711
    Also you might try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
    Putting iPod into Disk Mode
    http://docs.info.apple.com/article.html?artnum=93651
    Patrick

  • IPod classic is "connected" but doesn't show up on iTunes

    iPod says it's "connected" but it doesn't show up on iTunes. I've tried to reset it but can't figure out how to restore it. Everything on the ipod has been erased and it keeps freezing...
    Thanks!

    ok, ive been having the dame problem as the guy/girl who posted it i went to the site and i restarted the iPod service, that didn't work, then i uninstalled itunes and it showed up in itunes the first time i pluged my it in but a message, i thnk it was "-48" something about not being able to sync but it synced all the songs but the next time i plugged it didn't show up in itunes and a message in the bottom syaing "Windows - Delayed Write Failed, Windows was unable to save all the data for the file I:\ipod.control
    can anyone help me my 80g classic isn't even a year old

  • Server Admin connected but doesn't show anything

    Server Admin can't seem to show anything from the local server. Overview is empty and the services overview says Not available, Yet I know the services are available. I rebooted the server, but nothing.
    Any hints as to what is happening. I look at system.log but nothing jumps at a me for a problem. And the servermgrd only shows:
    #Start-Date: 2010-02-18 17:30:19 EST
    #Fields: date time s-comment
    2010-02-18 17:30:19 EST Initalizing plugins
    2010-02-18 17:30:21 EST Listening for requests
    How do I get back control?

    I believe the GUI communicates via servermgrd. You could try "sudo launchctl load /System/Library/LaunchDaemons/ com.apple.servermgrd.plist" and replace "load" with "unload" as required.
    Verify that servermgrd is running to begin with.
    Also, you could remove the server from the list, reboot, and add it back via IP or loopback address and "server_name.local" to see if it responds.
    You might also see if it will respond to the Admin Tools installed on an appropriate workstation.

  • While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player.Or neither connects to the server that i created

    While playing games like NFS and CounterStrike my macbook pro it does connects to the hotspot by any device either a Windows laptop, but doesn't show or connect to the server (LAN) created by windows player. Or, any other devices doesn't  connects to the LAN server that i created in the Game.     
    Could any one help me please.

    Please do not post more than about 50 lines of console logs or output from an Application crash at a time. No one can make it through those.
    If you had a kernel panic, those are Full of good information and should be posted in their entirety. They are stored, and can be read back and posted using this article:
    How to log a kernel panic

  • Iphone 4s upgraded IOS from 5.1.1 to 6.1.1. WIFI it's unusable. Phone it's connected, but doesn't navigate.... or navigate like a SNAIL.

    HI, Sorry for my BAD english, I'm Italian. I have an Iphone 4s.. four day ago, I upgraded my IOS from 5.1.1 to 6.1.1 (thinking that 6.1.1 was mature). This is WORST decision I was made. WIFI it's unusable. iPhone it's connected, but doesn't navigate.... or navigate like a SNAIL.
    I'm a computer technician and cisco CCNP... after some speedy try, I was able to use WIFI with WEP and not with WPA....
    Best result was with an 802.11/B AP  with 128bit WEP (no problem at ALL).......  I think there is a problem IOS - WPA and 802.11G AP...
    I hope this can help some user...... for me it's absolutely USELESS info because all my customer uses different AP with different encription so I CAN'T use anymore my phone.... I switch to galaxy sIII until apple resolve this issue.
    I'm an apple fan since 1987 (MY MAC II)  and NEVER has problem or problem was immediately resolved but
    on last THREE year, apple was made some mistake.... using CUSTOMER as TESTER....
    After 20 year of apple, if all continue so. I MUST abandon APPLE.

    I know that only some iphone 4s are affected by this problem but....
    before write, please CONNECT BRAIN and verify your info...
    So .... My brain and my iPhone are working, Yours are not.
    for your reference, HALF internet (including APPLE support ) are FULL of post regarding this issue....
    Do you actually knows how big the Internet is? Do you also know how many iPhones is out there?
    Stop BS.
    I'm an iphone fan since FIRST MODEL (2007) and an APPLE fan since MACII..
    My post would be a temporary solution for who are affected by this issue, for use wifi until apple fix it..
    I don't care what you have used since bla bla that won't change the facts.
    you don't know my skill so.... be propositive instead of....
    You don't know mine either
    Message was edited by: ckuan

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I'm having similar issues with my phone.  I got my first iPhone recently, only had an iPod touch gen4 for a little over a year.  Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas.  When I got home on the evening of January 11, my phone would not connect the router anymore.  I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting.  That laste for a few minutes and then wouldn't work anymore.   I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
    My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router.  When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there.  Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
    Hope Apple fixes this problem soon..............

  • After apple wiped my hard drive, my computer no longer recognizes my iphone 4.  It will charge, but doesn't show up in my sidebar or in itunes.  My computer says there are no software updates available.  I'm running OSX 10.5.8 and itunes is 10.3.1.

    After apple wiped my hard drive, my computer no longer recognizes my iphone 4.  It will charge, but doesn't show up in my sidebar or in itunes.  My computer says there are no software updates available.  I'm running OSX 10.5.8 and itunes is 10.3.1.

    After apple wiped my hard drive, my computer no longer recognizes my iphone 4.  It will charge, but doesn't show up in my sidebar or in itunes.  My computer says there are no software updates available.  I'm running OSX 10.5.8 and itunes is 10.3.1.

  • My caller id is not working on iphone 5 - it beeps but doesn't show who is calling or let me click over

    I have recently had my iphone 5 not show who is calling on call waiting.  The phone beeps but doesn't show the number / per son that is calling, won't let me click over and won't show who it was in my call history.  Help very annoying.

    1st go into your settings then tap phone to see if call waiting is turned on or off. If call waiting isOFF turn it ON. You can use also Apple article HT 4515. I would contact my wireless carrier reguarding the caller id not showing up and also with help reguarding your call waiting as well
    Hope this helps

  • I download an app. But doesn't show up on my homepage. I go to download it again from the cloud and all I get is a message saying "you already download this application so you will be able to redownload the app free of charge" I press ok.Still don't have

    I download an app. But doesn't show up on my homepage. I go to download it again from the cloud and all I get is a message saying "you already download this application so you will be able to redownload the app free of charge" I press ok. Still don't have it

    What is the app? What "homepage" do you mean?

  • TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

    I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
    I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • When I try to access my emails the screen opens but doesn't show any emails

    When I try to access my emails the screen opens but doesn't show any emails

    Tap to open a new tab and Private will be at the bottom left of the page. If it is active, tap to turn it off.

  • SSI shows up correctly in DW but doesn't show up in browser.

    I am trying to update the company website here at work using Dreamweaver 4 and the copyright information at the bottom of the page is in an ssi file. The file shows up fine in Dreamweaver but doesn't show up at all in either of my browers (Safari/Firefox). What am I doing wrong?  

    The file shows up fine in Dreamweaver but doesn't show up at all in either of my browers (Safari/Firefox). What am I doing wrong?  
    SSIs are parsed by the server.  You're probably not doing anything wrong, you simply need to upload the files to your remote server and look at the pages on-line.
    If you want to preview local files, you'll need to install a local testing server on your machine. Get one of the following servers for your OS and follow the installation instructions.
    WAMP for Windows
    http://www.wampserver.com/en/
    XAMPP for Windows
    http://www.apachefriends.org/en/xampp-windows.html
    XAMPP for Mac
    http://www.apachefriends.org/en/xampp-macosx.html
    MAMP for Mac
    http://www.mamp.info/en/downloads/index.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • HT2953 I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes.  Can someone suggest a fix, please?

    I have an hp dvd ram gh60L DVD Drive. It shows up in Windows Explorer (Windows 7), but doesn't show up in itunes.  Can someone suggest a fix, please?

    Hello b0nvivant,
    Thank you for providing so much information about the iPod issue you are experiencing.  I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How do you define what machines will get an IP form your Lion DHCP server?

    I have set up a Mac Mini Lion server for use in my classroom. I currently have 8 macs that are connecting to it. I would like my Lion server to serve IPs to these 8 macs, so I have set up the DHCP server to assign these. When I look at what machines

  • Question about the size af:inputText

    can <af:inputText> grow itself automatically to avoid scrollbar? if user types a long text into it, the inputtext area will become bigger to fit it to avoid scrollbar. is this possible? another question is,i found the size of this input area are cont

  • Need some ideas for programmatic/dynamic ADF BC using JDeveloper 10.1.3

    Using ADF Faces 10g, I built a page which is used to upload an excel file to the server. The contents of the spreadsheet is further parsed into a 2 dimensional array. In addition, I am able to determine the database table information from the workshe

  • Collab API / RemoteSession exception

    Hi, I ran into the following issue. I'm trying to query for a list of projects. However, I get the following exception: CollaborationException: Call into WS Portal to authorize login token 12344|1265824413|z3uRfZrKCRGAyC6LEtIs4EYsagY= failed. Details

  • Need clarification about block in Sale order

    we would like to know is there any other standard t-code available to do the sales order block removal which we are doing through VA02. blocks like schedule line block, road permit block. Thescenario is as follows: Line Item Vise : Z1 Block - If the