9300i GPRS/Easy Lan Connections

On my 9300i having set up for web on 02 wap and wireless connections I can connect to the web and send emails but cannot receive emails.
System times out on access connections and I also received message " sorry Status 500 Error" on occassions.
Can someone help please?

I used to have this message when i was only set up for Wap, not full GPRS. Maybe check with your network rovider to make sure you have the full GPRS data service?

Similar Messages

Portege Z930: How to create GPRS / Wifi / LAN connection profiles?

Hi !
I can't find any software (Toshiba or Intel) on my Portege Z930 that can manage
connections profiles to automatically be connected on GPRS or Wifi or LAN regardless to connections available (office, home, public area...)
Toshiba Wirelss manager runs with GPRS only and not wifi or lan
Thanks for your help !
Best Regards

Hi
Such universal utility is not known to me.
The Toshiba Wireless manager handles the 3G profiles.
For Wlan connectivity and profile management you could use the TOSHIBA Configfree
Here a short details:
http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Configfree-Utilities/ta-p/347098
Well, and LAN would works until the LAN cable is connected :)

Linksys Easy Link Advisor [ Lan Connected Users]

Hi. I am using Linksys Easy Link Advisor, I am using my Laptop and is connected through Wireless mode, Now one of my computer is connected through Lan line [ Ethernet cable]. The Lan line and Wireless both computers are working properly, but while I am using Wireless Laptop I am unable to watch Lan Connected computer.
In Router setting I have enabled Wireless MAC Filter and all the computer like Wireless and Lan Line computers are registered. But in Linksys Easy Link Advisor the Lan Line computer dosen't appear.
Please Help.
I am thankful from your team side which has helped me in solving many problems for Linksys Easy Link Advisor.
Solved!
Go to Solution.

I have Linksys Easy Link Version 3.11 (Build 9139.94)     Platform Version   11.1.9051.0
I connected my Laptop wirelessly through this and now I connected one more Laptop through Lan [ Ethernet Cable]. But I am unable to see this Lan Connected Computer. The Wireless computer can be viewed.
I disabled firewall from all like Windows Firewall Trend Micro Firewall, Still unable to add Lan [ Wire connected] computer through my Laptop which is wireless connected. But still I cant see the Lan Connected Computer on Wireless Computer.
Is there anything to do in router. I have Linksys Wag160N ADSL2+   [MAC-00226BF1F82]
Please help me.
Thanks.
Ghanshyam,
Dubai   U A E
(Mod note: Edited for guideline compliance.)

How do I network my MacBook Air to a PC to utilize the PC's LAN connection?

Want to connect MacBook Air (10.8) to a PC over the PC's USB port.
Need to utilize the PC's LAN connection to connect to the internet.
Not allowed to connect the MAC directly to internet via Ethernet or WiFi.
PC is allowed to be connected to netowk.

This video will guide you to get the Ipad to print from a printer connected to the windows pc- http://www.youtube.com/watch?v=P_64MdjFoL0

Lan connectivity Issue on autonomous AP with throttles

          Hello,
I encounter a strange problem on several AP 1242 in version 12.4(25d)JA1 of a customer :
He has 10 autonomous AP covering a factory and is using them for laptop connectivity and TOIP with mainly 7921 Cisco Wifi Phones.
The phones are configured to use only 802.11a.
The APs loose LAN connectivity randomly and therefore the clients don't work anymore.
The AP are connected on a 2960 and a 3560 wich are in turn connected on a 3750 wich route the trafic.
After checking spanning-tree no loops are present.
When I check the counters on the AP involved I see the "trhottles" and "ignored" counters incrementing on the fa0 link of the AP impacted wich mean I think it can't handle the incoming traffic. This incoming traffic seems not to be too big however. I can see drops on the switch interface connecting the AP.
There is a lot of roaming on the AP due to people walking in the factory with their wifi phones.
Here is a view of the fa0 counters :
AP1242-LOGIST#sh int fa0
FastEthernet0 is up, line protocol is up
Hardware is PowerPCElvis Ethernet, address is 001d.a1ce.26e2 (bia 001d.a1ce.26e2)
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Full-duplex, 100Mb/s, MII
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/160/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 81000 bits/sec, 53 packets/sec
5 minute output rate 29000 bits/sec, 26 packets/sec
     7447113 packets input, 674891974 bytes
     Received 286839 broadcasts, 0 runts, 0 giants, 549631 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 549631 ignored
     0 watchdog
     0 input packets with dribble condition detected
     4422100 packets output, 609868806 bytes, 0 underruns
     0 output errors, 0 collisions, 4 interface resets
     1 unknown protocol drops
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
Here is a small part of logs concerning roaming, i don't see errors or log indicating that something is wrong nor in the switches log :
Jun 6 12:57:27.007: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP001E4A3EE15D 001e.4a3e.e15d Associated KEY_MGMT[WPAv2 PSK]
Jun 6 12:57:42.499: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP588D09D3A92B 588d.09d3.a92b Reassociated KEY_MGMT[WPAv2 PSK]
Jun 6 12:58:02.620: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 588d.09d3.a92b Reason: Sending station has left the BSS
Jun 6 12:58:03.653: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP588D09D3A92B 588d.09d3.a92b Reassociated KEY_MGMT[WPAv2 PSK]
Jun 6 12:59:15.564: %DOT11-6-ROAMED: Station 588d.09d3.a92b Roamed to 001e.134c.5a50
Jun 6 12:59:15.564: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 588d.09d3.a92b Reason: Sending station has left the BSS
Jun 6 12:59:41.905: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 442b.0355.ab28 Reason: Previous authentication no longer valid
Jun 6 12:59:54.728: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP442B0355AB28 442b.0355.ab28 Associated KEY_MGMT[WPAv2 PSK]
Jun 6 13:01:12.541: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP588D09D3A92B 588d.09d3.a92b Reassociated KEY_MGMT[WPAv2 PSK]
Jun 6 13:02:35.841: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 001e.4a3e.d875 Reason: Previous authentication no longer valid
Jun 6 13:02:36.489: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   ec85.2f7c.c837 Associated KEY_MGMT[WPAv2 PSK]
Jun 6 13:03:29.256: %DOT11-6-ROAMED: Station 588d.09d3.a92b Roamed to 001e.134c.5a50
Jun 6 13:03:29.256: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 588d.09d3.a92b Reason: Sending station has left the BSS
Jun 6 13:04:32.754: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP001E4A3ED875 001e.4a3e.d875 Associated KEY_MGMT[WPAv2 PSK]
Jun 6 13:06:47.858: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 001e.4a3e.e15d Reason: Previous authentication no longer valid
Jun 6 13:07:18.107: %DOT11-6-ROAMED: Station 001f.6c7a.5101 Roamed to 001d.a2bb.15b0
Jun 6 13:07:18.107: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 001f.6c7a.5101 Reason: Sending station has left the BSS
Jun 6 13:07:38.109: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP588D09D3A92B 588d.09d3.a92b Reassociated KEY_MGMT[WPAv2 PSK]
Jun 6 13:07:42.031: %DOT11-6-ROAMED: Station 588d.09d3.a92b Roamed to 001e.134c.5a50
Jun 6 13:07:42.031: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 588d.09d3.a92b Reason: Sending station has left the BSS
Jun 6 13:07:46.489: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP001F6C7A5101 001f.6c7a.5101 Reassociated KEY_MGMT[WPAv2 PSK]
Jun 6 13:08:27.712: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP588D09D3A92B 588d.09d3.a92b Reassociated KEY_MGMT[WPAv2 PSK]
Jun 6 13:08:44.502: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 588d.09d3.a92b Reason: Sending station has left the BSS
Jun 6 13:08:44.572: %DOT11-6-ASSOC: Interface Dot11Radio1, Station SEP588D09D3A92B 588d.09d3.a92b Associated KEY_MGMT[WPAv2 PSK]
Jun 6 13:08:56.778: %DOT11-6-ROAMED: Station 588d.09d3.a92b Roamed to 001e.134c.5a50
Jun 6 13:08:56.779: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 588d.09d3.a92b Reason: Sending station has left the BSS
Jun 6 13:09:17.874: %DOT11-6-ROAMED: Station 001f.6c7a.5101 Roamed to 003a.9a92.8d70
Jun 6 13:09:17.874: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 001f.6c7a.5101 Reason: Sending station has left the BSS
The AP are configured as follow :
Current configuration : 5184 bytes
! No configuration change since last restart
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname AP1242-LOGIST
logging rate-limit console 9
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone gmt+1 1
clock summer-time gmt recurring last Sun Mar 2:00 last Sun Oct 3:00
dot11 syslog
dot11 vlan-name Data vlan 11
dot11 vlan-name Voix vlan 14
dot11 vlan-name Webguest vlan 5
dot11 ssid WLAN_data
   vlan 11
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 10600C0E261B173C252203797479633F371A29
dot11 ssid WLAN_voice
   vlan 14
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 080F49592A1500203B2D25567A7A7622263C0C
dot11 ssid Webguest
   vlan 5
   authentication open
   mbssid guest-mode
dot11 wpa handshake timeout 1000
dot11 arp-cache
dot11 priority-map avvid
dot11 phone
power inline negotiation prestandard source
class-map match-all _class_voice0
match ip dscp ef
class-map match-all _class_voice1
match ip dscp cs3
policy-map voice
class _class_voice0
set cos 6
class _class_voice1
set cos 3
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 11 mode ciphers aes-ccm
encryption vlan 14 mode ciphers aes-ccm
ssid WLAN_data
ssid WLAN_voice
ssid Webguest
mbssid
power client 17
channel 2472
station-role root
dot11 qos class voice local
    admission-control
    admit-traffic narrowband max-channel 75 roam-channel 6
dot11 qos class voice cell
    admission-control
no cdp enable
infrastructure-client
interface Dot11Radio0.5
encapsulation dot1Q 5
no ip route-cache
no cdp enable
bridge-group 5
bridge-group 5 subscriber-loop-control
bridge-group 5 block-unknown-source
no bridge-group 5 source-learning
no bridge-group 5 unicast-flooding
bridge-group 5 spanning-disabled
interface Dot11Radio0.11
encapsulation dot1Q 11
no ip route-cache
no cdp enable
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio0.14
encapsulation dot1Q 14
no ip route-cache
no cdp enable
bridge-group 14
bridge-group 14 subscriber-loop-control
bridge-group 14 block-unknown-source
no bridge-group 14 source-learning
no bridge-group 14 unicast-flooding
bridge-group 14 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 11 mode ciphers aes-ccm
encryption vlan 14 mode ciphers aes-ccm
ssid WLAN_data
ssid WLAN_voice
ssid Webguest
no dfs band block
mbssid
channel dfs
station-role root
interface Dot11Radio1.5
encapsulation dot1Q 5
no ip route-cache
no cdp enable
bridge-group 5
bridge-group 5 subscriber-loop-control
bridge-group 5 block-unknown-source
no bridge-group 5 source-learning
no bridge-group 5 unicast-flooding
bridge-group 5 spanning-disabled
interface Dot11Radio1.11
encapsulation dot1Q 11
no ip route-cache
no cdp enable
bridge-group 11
bridge-group 11 subscriber-loop-control
bridge-group 11 block-unknown-source
no bridge-group 11 source-learning
no bridge-group 11 unicast-flooding
bridge-group 11 spanning-disabled
interface Dot11Radio1.14
encapsulation dot1Q 14
no ip route-cache
no cdp enable
bridge-group 14
bridge-group 14 subscriber-loop-control
bridge-group 14 block-unknown-source
no bridge-group 14 source-learning
no bridge-group 14 unicast-flooding
bridge-group 14 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
speed 100
full-duplex
no cdp enable
hold-queue 160 in
interface FastEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
no cdp enable
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface FastEthernet0.5
encapsulation dot1Q 5
no ip route-cache
no cdp enable
bridge-group 5
no bridge-group 5 source-learning
bridge-group 5 spanning-disabled
interface FastEthernet0.11
encapsulation dot1Q 11
no ip route-cache
no cdp enable
bridge-group 11
no bridge-group 11 source-learning
bridge-group 11 spanning-disabled
interface FastEthernet0.14
encapsulation dot1Q 14
no ip route-cache
no cdp enable
bridge-group 14
no bridge-group 14 source-learning
bridge-group 14 spanning-disabled
service-policy input voice
service-policy output voice
interface BVI1
ip address 10.17.10.5 255.255.255.0
no ip route-cache
ip default-gateway 10.17.10.254
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
logging trap warnings
logging 10.15.51.115
no cdp run
bridge 1 route ip
line con 0
line vty 0 4
sntp server 10.15.1.50
sntp broadcast client
end
Does someone ever experienced a similar problem ?
When I shut radio interfaces they're is no more problems on the LAN. Can this be an overlapping coverage issue ?
Can someone please give me advices on how to troubleshoot this issue ?
Thank you in advance as I'm a bit stuck.
Best Regards,

     Hi Scott,
Thanks for your reply.
Do you think this can be the origin of the issue my customer encounters or is it only to be standard ? As this change will have to be made on all clients, if there is a chance it solves the problem I will do it ASAP, if not I will delay it in a less busy period :-)
Can the constant roaming associations and dissasociations overload the AP and make it stop responding on the LAN or is it only a throuhput problem ?
Thanks in advance for your answer.
Best Regards,

Error Code 10 Intel 82579LM LAN connection on Portege R830-13C

After recent Windows 7 32 Bit update, the LAN connection is failing to start (Code 10) under device manager
"This device cannot start. (Code 10)"
I have tried uninstalling drivers / rolling back / and installing the following files from Toshiba support pages, but does not resolve the issue.
- lan-20110330164846
- fareg-20110331130330
How do I get Intel 82579LM Gigabit Network Connection on Portege 830 -13C to work?
(wireless is fine)

Hi
Error Code 10 is generated when Device Manager can't start the hardware device and usually its caused by outdated or corrupted drivers.
Therefore I think that driver installation should help to sort out this issue.
I would recommend doing this:
- Go to device manager and uninstall the LAN driver
- Reboot the notebook but dont install the driver
- Install the CCleaner and clean the registry
- Reboot the notebook once again
- Then go to device manager, choose the LAN card (Ethernet controller) and install the downloaded driver
As option I would recommend testing the LAN driver from Intel page.

HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity

Recent Over The Air (OTA) update for Slate 21 Update
Link to thread discussion here, fix listed below -
ISSUE:
A previously applied HP Slate 21 Kit Kat Update (Android 4.4.2) over the air (OTA) update may have caused issues with audio quality or wireless LAN connectivity.
Audio Quality: Bass response will be poor. Audio will play but bass frequencies will be lacking.
WiFi Issue: 5 GHz band not functioning properly
Status:
A new update (17r25.1-011-11-WW) has been released over the air (OTA) to end users
Resolution:
Apply update 17r25.1-011-11-WW
If the user was previously on 17r25.1-010-10-WW then a Factory Reset should be performed to complete the resolution.
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

Pebbles65,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Cheers,
KarolB
I work for HP

Is it possible to control (screen share) my Mac Book on my PC over a LAN connection with fullscreen 1920x1080 resolution AND sound?

I've fiddled with Team Viewer and was able to control my Mac on my PC, but it wasn't over my LAN connection (it was slow), and it was a small windowed view without the Mac's sound. I want to cotrol my Mac, with my PC over LAN and on a 1920x1080 resolution with the Mac's sound on my PC.
(Sry for a almost report of this (https://discussions.apple.com/thread/4031259) but I forgot to ask about the sound).

well there is a program called logmein found at logmein.com. it fixes your resolution problem, but the speed is still not the best due to a lag still. As long as internet connections are decent, the lag should be minimal

Cannot re-boot after enabling K8T Neo LAN Connection

I've tried to enable the K8T Neo LAN controller in BIOS so that I can connect a Wireless Router to my PC. However, when I do this, the PC will not boot and I have to disable the LAN controller.
On booting-up the BIOS seems to be looking for an ethernet controller and a message states that either the device is not plugged in or the cable is faulty ! Why should enabling the onboard LAN controller affect the device the BIOS boots from ?
Can I plug a Wireless Router directly into the RJ45 LAN connection on the K8T Neo and if so, how ?
Thankyou for any helpful advice

Check to make sure you are not set to boot from network. Unfortunately I can't remember the exact name or where it is located, but it may help.
Quote from: Geps on 07-July-05, 22:52:17
as you say: a WIRELESS router is WIRELESS, how could you plugin a cable from a wireles router. or does it also have rj45 conectors?
if you want to use the wirreles function, you will need to buy a wirrles lan adapter (usb) for your pc
I have never seen a wireless router without rj45 connectors. (WAP yes, router no).
Good Luck
Jeremy

Disable WLAN when LAN connected - how do I do?

Hi,
We are in the process of migrating from HP notebooks to Lenovo. We used to set a BIOS setting called "LAN/WLAN Switch" in the HP notebooks, which makes the WLAN to disable when the LAN cable is plugged in or the pc is docked
Where do I find a similar setting in Lenovo notebooks?
We need it because LAN and WLAN is on separate subnets, and Windows XP has trouble working with both nets at the same time. Users compalins about loss of network connectivity if both nets are enabled at the same time.
There may be a way to configure LAN/WLAN-switching in the Lenovo software, but we prefer to use the build in WLAN functionality in Windows, not using Access Connection or similar third party WLAN software. Our experience shows that uses often have difficulties finding out how to use third party WLAN software when traveling and need to connect to other WLAN's. The build in Windows WLAN software has the advantage that it is always the same, no matter which brand or model of pc they are using.
Regards,
Peter
www.skov.dk

Check out Wireless AutoSwitch at http://www.wirelessautoswitch.com it does what you are asking.
What is Wireless AutoSwitch?
Wireless AutoSwitch runs as a service and will automatically disable your wireless card when you connect to a LAN (hard wire) connection, and re-enable the wireless card when there is no LAN connection. This ensures that you are always using the fastest connection for network traffic. In the office this helps reduce redundant network connections, while still helping your employees seamlessly transfer from wired to wireless network connections.
For offices that are wireless security conscious this application makes sure the laptop's wireless card is off when the user is wired into your network, preventing bridged connections and preventing someone from the outside hacking your network through a laptop's wireless card.

Strange: just lost use of Built In Internet (LAN) connection!

Greetings,
I was just switching from wireless Airport connection to Built In internet (wired/LAN) connection (I do that to insure more reliable large downloads, software updates), and I realized that upon Turning Off Airport, I was not getting automatic connection to the built in NIC, as I do usually. I checked Preferences >>> Network, and observed that the built in connection was "inactive". I am not sure how to activate it again. LAN cable is OK, internet connection and modem OK, etc...
I'll appreciate refresher!
- Roger T

sig, thanks a lot for your prompt reply... I had restarted the system indeed.
I got to start looking deeper into seldom visited settings... And I found one that fixed the problem.
I went to "System Preferences" >>> "Network" >>> observed that the "Built In Internet" was INACTIVE >>> clicked on the smal, gear-like button at the bottom, right next to the "+" and "-" buttons. AND, lo and behold, by making the "Service Active", I restored the Built In Internet" connection.
Man, go figure what disconnected it in the first place! I just drew a blank initially!
Thanks again... Sometimes, one needs a prod
- Roget T

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

LAN Connections Drop WRT150N

Purchased and installed last Wednesday. Wired and wireless LAN connections have dropped twice since then. Can't access 192.168.1.1 at all, for example.
EasyLink shows message "Different Network Detected". Attempting to use dialogs fails, however, since the router isn't responding.
If I unplug the router, wait, and the restore power, LAN connectivity is restored.
Firmware is up-to-date.
I expect occasional situations like this, but the frequency is troublesome. Any suggestions?
Mark
Message Edited by tcrg311 on 12-15-2007 08:21 AM

I have just got this router yesterday. It did this right out of the box. After an hour or so the connection would just drop. For everything. Some other topic on this site suggested power surges for a similar problem. I moved my power supply to somewhere less crowded and have had continuous internet for about an hour now.
I'll let you know if it worked.
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 12-17-2007 07:15 AM

802.1x on a wired Lan Connection

Dear Community,
i have the job to connect a Windows CE 6.0 device to a Network (wired) with 802.1x. The switch to wich i connect the device is operating as authenticator and the Wince device is the supplicant. A Radius Server with AD is also present .
All the informations and samples that i can find are relating to wireless LAN connections (WZCSVC). A description of the EAPOL API is also absent (or i was not able to find it).
I'm afraid that Wince 6.0 is not prepared for using 802.1x over a wired connection like Win XP can, but i'm not sure about that. I can not find a definite statement whether it is possibe or not.
Does anybody know if it is possible and/or how i can solve this problem.
Regards Achim

Community,
anybody has answer to this problem? I have to do the same thing...
Achim,
did you solve this problem?Thank you
in advance for any help you
can provide.
Regards Bruno

Xi server and r/3 given the lan connection how to integrate these both

hi
we have given the lan connection to xi and r/3
could you help me hoe to integrate these both systems so as to enable me to do
the idoc to file and rfc to file scenarios) ( i mean what are the RFC connnctions and ...to be maintained in xi and r/3).

Hi,
To use RFC adapter,
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
To use sender IDOC
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Also, if you need to use ABAP proxies,
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Jai Shankar

9300i GPRS/Easy Lan Connections

Similar Messages

Maybe you are looking for