9320 on Constant Reboot after Trying to Turn On Bluetooth

My BB Curve 9320 is constant reboot.
I've had the phone about 9 months. I went to turn on the Bluetooth for the first time today. As soon as I opened the menu tray and "checked" bluetooth the phone shut off. It started to reboot...it went through the whole cycle of loading and will reach the regular screen, but after 3 seconds will shut off and restart again. Continuously.
I have:
-taken the battery out (multiple times): continues
-followed the advice to start in Safemode, it will start in safemode, but shuts off after 3 seconds and reboots
-connected it to laptop via USB, but the computer will not pick up the device to be able to access it
I have actually gotten to the screen and in the 3 second window been able to click on the Networks tray again to see that Bluetooth is no longer "checked" on--doesn't matter, still only have the 3 secs before the reboot cycle.
Advice? Suggestions?
Solved!
Go to Solution.

Hi and Welcome to the Community!
Given the failure of Safe Mode, you likely need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Re: Need Help! Dell poweredge T630 cannot reboot after trying to add new memory

It fail to initialize the iDRAC

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Need Help! Dell poweredge T630 cannot reboot after trying to add new memory card

What errors are you seeing on the screen?

hi, can any one please advise what should I do for my server? Dell poweredge T630 cannot reboot after trying to add new memory card. Even I remove the newly added memory card and only keep the original one there, it still cannot reboot. Before I try to add the memory card, it works well without any rebooting issues.
Thank you so much for help
steven
This topic first appeared in the Spiceworks Community

Constant reboot after IOS4 upgrade Solved!

I too was having the dreaded error 29 code and stuck in recovery mode along with the 5 minute constant reboot since upgrading to IOS4 two days ago. I had to use Blackra1n to get it out of recovery. Blackra1n will NOT jailbreak IOS4 but will fix the stuck recovery mode problem. I also had previously replaced the battery with a higher capacity mAh. the upgrade to v3.1.3 went perfect. Only when I upgraded to IOS4 did things change. It would constantly reboot and the battery was slowly draining and would not recharge. I poured through countless forum posts and tried most all of them. Then this evening I found a post somewhere in this forum about possibly the battery was causing the problem. So I got out my tools and put the original battery back in and booted up. It got to the front screen and immediately a bunch of old calendar events started popping up which was different than before. I cleared them all and I have now had my iphone on steady for over an hour and not one reboot. Battery is also now recharging off my laptop.
So long story short, if you've replaced your battery at some point, put it back in or hopefully an OEM with same APN: 616-0434 (#for my iPhone). Everything is now working in IOS4!
Good battery replacement guide here: http://www.rapidrepair.com/guides/iphone-3g-s-repair/iphone-3g-s-dissasembly-rep air-guide.html

Booted into Faunos Live system.
As root, ran Fsck on the HDD with inode problem. Answered yes to all system repair queries.
Rebooted into archlinux HDD with no problems.

HT4623 my iphone 4 needs rebooting after trying to update through air, but i dont have access to itunes. Is there any manual way to do this?

my iphone 4 stop working after trying toupdate, how can i reboot without itunes?

If you mean it's in recovery mode, no. There is no way around it. It must be restored using a computer running iTunes.

Constant Reboot after software update

I just performed Software Update on my Leopard MacBook Pro and now it's in a constant reboot cycle. The grey boot up screen displays for 90 secs or so and then reboots and the cycle repeats. There were three programs for update but the only two I remember were iTunes & Front Row. How do I recover? Thanks.
Kevin

Just to add some more detail to the issue:
I've reset the NVRAM by holding down the Option/Control - PR at bootup and it seemed to work in that it then rebooted again. But nothing else but the continuing reboot cycle.
Next I tried to get into Safe mode by holding down the Shift key on bootup but this did not work. I inserted the Leopard DVD on bootup but it just spins.
Help!!!
Kevin

S4 Constant Rebooting after update

Issue is affecting four of my devices. Two of the devices are having this issue with only factory apps and blank sd card, these device came directly from VZ with no accounts installed before and after update.
Restarting is random. Not linked to power save, sleep, calls, apps, or anything else I can test.
Devices are unusable. Please offer a roll back.
Devices have been factory reset, cache cleared, and operated in safe mode. The issue persist across all.

Read post 54 in this thread here... Re: Galaxy S4 randomly rebooting after VRUFNG6 update!
In a nutshell, re-enable any disabled apps you have on your phone and power off and back on. You can then disable the apps if you would like.
This is a temporary workaround. Verizon and Samsung are working on an update (supposedly) which will not be out for a while.

ASA 5505 Keeps rebooting after trying to load image in ROMMON mode

Hi,
I erased my image to upgrade but my ASA was shut down half way though, so I found myself in ROMMON mode.
I was able to upgrade my image once in rommon mode but I found I had an incorrect version so I went through the whole process again. Since trying to load a new image I have been constanly receiving the 'Use Break or Esc to interrupt boot. Use SPACE to begin boot immediatly'.
I can connect to my TFTP server and load the image but it always reboots, or if I select ESC it just goes back to ROMMON mode.
Any thoughts??

I had to do 2 things, one replace memory and the second is set VLAN=untagged, then I could ping the server and tftpdnld would work.

Constant rebooting after last night's OTA update

I have a Droid RAZR HD and did an OTA update last night upon receiving the notification on screen. This updated the system version to 9.18.79.XT926. It updated successfully according to the on-screen notice.
However, the phone immediately began rebooting about every 3 to 5 minutes after the update. I had no problems with chronic reboots until the update. The phone is virtually unuseable. Has anyone else had this issue?

Very interesting. I have no idea why they would issue 2 different updates like that. one for the MAXX and another for the HD. Hilarious that one of the issues to be "mitigated" was the "random power cycle and resets." LOL. Right after the update, I started getting resets every 3 to 5 minutes and never had that issue before.
Be that as it may, I did try going into safe mode first, and hoped that would resolve the problem. It didn't. I then did the factory reset and the phone is still rebooting every few minutes.
I called Verizon tech support, and to their credit they are sending me out a replacement phone. It will be interesting to see if others encounter the same problem I had.

Wi-fi remembering after sleeping with turned-on bluetooth

Hi Guys!
I found really weird issue for my Macbook Air 13" 2012.
Currently i'm on Mavericks, but not sure - is it Mavaricks's problem or my Air - when bluetooth is on and i close Air, after waking-up laptop doesn't connect to my Wifi network. Macbook sees my network but doesn't "remember" it.
But when bluetooth is off - it's ok. Laptop remember wifi and connects in one moment.
Maybe anybody has or had same problem.
Thanks!

Hi
Been following these discussion regarding mavericks and wifi dropping.
I also had a late 2013 MBP with mavericks preinstalled and everything reinstalled by me by hand (first time ever since the early days of pre OSX with OS6 as always migrated stuff over).
So when wifi started hanging on wake up from sleep I was both peed off after all the handwork and stymied.
So thanks to you all on the forums for offering clues.
These led me to figure out the issue was a conflict between Bluetooth and Wifi.
- Helpful pointers included getting iStumbler to examine network setups.
- Holding down alt key when choosing Wifi menubar icon to examine whether 2.4 or 5ghz channels (potential conflict twixt BT and Wifi competing on 2.4ghz?).
- Looking at the router I was using in terms of network protocol b, g, n, etc.
This led me to realise that the router I was using was an old Sky one with only b and g protocol.
I also had an apple equipment based (base unit and two express extenders) network running the more modern n protocol which was ethernet linked to the Sky router.
I had stopped using it a year previously as it would only pick up 2Mbs speed, compared to 8Mbs for the Sky, and gave up breaking my head as to why.
However on reading comments that referred to a router being the culprit I switched over to the Apple network (ethernet linked to the Sky router) rather than the Sky router only based network and hey presto.
Problem solved.
It seems all is good, no issues whatsover with Wifi dropping on wakeup or during use AND I am getting great speeds (10Mbs+) from the Apple based network, ethernet linked to the Sky router (dont ask why now).
A further note relates back to a historical parallel on my 2010 MBP with Wifi issues which turned out to be the Transmit menu bar icon. That seemed to have been resolved eventually, thanks to forums gathering options.
So when the similar issue arose with Mavericks my memory of this was triggered and I unchecked the Transmit menubar icon, but havent rechecked and rechecked it now I have Bluetooth and Wifi.
Will do after a few days of running the above BT/Wifi solution will post only if it affects the Wifi wakeup use problem.
So many thanks for all the angles and happy hunting for those still adrift with the Wifi dropoff issue.

Extreme router reboots when trying to connect to disk after 7.1.1 update??

I just brought my new AE-n router home not more than 2 hours ago. I connected a USB disk to it and it was discovering it and was able to transfer quickly to it.
However, I updated my firmware to 7.1.1 and whenever I try to manually connect to the disk, my router restarts itself. I've tried resetting the disk and unplugging the router. I have not changed any settings other than the firmware.
Anyone have an idea? Can I try putting the old firmware back on? Thanks.

Ok, I did that. UPDATE:
I downloaded 7.0 and 7.1. I installed both and also tried resetting the router after each firmware install.
The problem occurs when I try to manually connect to the disk using the disk utility. After I'm prompted and enter my login info, the disk light looks like it's being read and immediately after, the light turns amber and the router reboots.
I'm currently using 7.1. I can get the disk to connect fine when I reset everything, configure the router to my specs and then turn the USB disk on. HOWEVER, once I turn off the disk and then turn it back on, I can try to connect to it and the router will reboot again. Obviously I want the option to turn my disk off at night. 7.0 didn't even work at all, barely.
Any ideas??

I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

I accidentally turned off bluetooth and now my keyboard won't connect. I already tried to reboot the computer. I can't use the mouse because I ca't get past the user log-in screen. Please help

http://www.cultofmac.com/247979/whoops-reconnect-your-bluetooth-keyboard-and-mac -after-logging-out-os-x-tips/
had the same problem and it worked!

My wifi wasn't working for more than 10 minutes at a time after updating to IOS8 and resetting network settings. I turned off google drive, turned off Bluetooth, reset network settings and rebooted my iPad4. So far so good.

I have an ipad4. Wifi keeps cutting out after the upgrade even after I forget the network and resign on or reset all network settings. I deleted iCloud drive from my iPad, turned off Bluetooth, reset network settings, and rebooted my iPad. Since I upgraded to IOS8 this is the longest wifi has consistently been working for me. Which is approximately an hour now. Anyone else find that this worked or have figured out if this or anything out there is a permanent fix?

Hi CollinGCC78,
It sounds like you have been on the right track in troubleshooting this issue. If you are still having issues, you may want to double-check the steps outlined in the following article, in order if possible (apologies for replicating any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
Regards,
- Brenden

After upgrading software on my iphone 5. I am not able to in app purchases. I have tried to turn of the restrictions and it is still not letting me make purchases.

After upgrading software on my iphone 5. I am not able to make in app purchases. I have tried to turn off restrictions and still not able to make in app purchases. Can anyone help me?

If there are no restrictions engaged and you are not receiving any Error messages or Alerts...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT201210 my phone will not turn on after trying to update now all it does is tells me to plug into itunes i have done this and still does not turn on

my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help

Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

9320 on Constant Reboot after Trying to Turn On Bluetooth

Similar Messages

Maybe you are looking for