9360 dont want to enter safe mode to start. What sould I do?

I followed this advice but I'm still unable to get my 9360 up and running!
Battery pull, insert battery and when the red light goes off, hold down the back key through the entire boot process. It will give you a message about safe mode.
remove that app and do another battery pull.
http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB17877

It does not what to sync you add-ons from where to where? Are you sure the sync key is correct? Have you looked at the help article [[Firefox Sync troubleshooting and tips]] ?

Similar Messages

Blackberry 9800 Torch not starting up or entering Safe mode

Hi all,
I am owner of a Blackberry 9800 Torch for about a year and now it does not startup. I turned the phone off last night and this morning it does not start up. I didn't make any changes to the phone so very strange.
The behaviour is that when I take the battery out and it turns on, the load screen start but the little white line only starts a little(2mm line) and then it restarts and does the same thing and loop over and over again in this till battery runs out.
I have tired to enter Safe mode by holding in the Escape bottom when the load screen starts or when the red light turn off but it does not enter Safe mode.
Please can anybody advise how I can fix this?
Thanks in advance,
Stefan

Are you able to restart your device in safe mode as shown in KB17877?
I assume, since it's caught in a reboot cycle, when you connect to the Desktop Software it doesn't take a stable connection to reinstall your software?
If that is case, remove your battery and keep it out when you connect to the Desktop Software. You will get a pop up that the device can't connect and there should be Retry, Update and Cancel buttons. Select Update and you will then be able to reinstall the current device software version.
When the load is progressing, you will see a step that says "Wait for device initialization". At this point, insert the battery and the reload should complete.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Satellite T135 How to enter Safe Mode and HDD Recovery if "F8" doesn't work

Hello everybody
I have a Toshiba Satellite T135 Laptop and it has recently crashed. Since then, every time I switch it on, Startup Repair automatically gets enabled. But it fails repairing the error.
I tried to resolve the problem with System Restore, but that didn't work either. So I think I have to go through the HDD recovery procedure.
The problem is, that I have a lot of data on my laptop that I need to safe first. I wanted to do this via Safe Mode which I supposedly should be able to enter by pressing "F8" while initializing, when the Windows logo appears. But my laptop doesn't react when I press F8, but rather begins to make a alerting sound, if I press the button for a longer time.
Apart from how to enter safe mode when pressing F8 while initializing doesn't work, I do have a second question: Is Toshiba Recovery Wizard the equivalent for HDD Recovery Procedure? That's the only similar option I've been able to find...
Thank you very much for your advice.

Hi buddy,
Yes, the Toshiba HDD recovery option will wipe the *first* partition of HDD. Thats the partition where Windows is installed so all files on this partition will be deleted to restore the original out of box settings. If you have stored the data on this partition they will be deleted but all data on second partition will not be deleted.
You can perform a backup if you buy an external HDD case as MisterX suggested. Put the notebook HDD into this case and connect it to another computer. Then you can back up all files that you need. :)

How do I enter Safe Mode on my Satellite U300?

Does anyone know how to enter safe mode on my u300. tried the usual F8 without success
Any Ideas?
Have got "The User Profile Service failed the logon." and was going to try system restore to resolve it.
Any help would be appreciatted.

Hi
You can enter the advanced boot menu only using the F8 button.
Did you try to press it several times in row?
You should press it immediately after the notebook has been powered up!
Sorry but other way is not known to me
You could try to boot using an Windows Vista disk.. this could help to repair the OS.
In worst case you have to reinstall the OS... :(

I dont want to enter payment details ,iam new to iphone i need to install apps and i also did't get none option

i dont want to enter payment details ,iam new to iphone i need to install apps and i also did't get none option

You have to follow the instructions on this page when creating a new account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Suppor…
If you don't then credit card details will need to be entered before the account can be used to download any item from the store.
If you are being prompted to review the account when logging into it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will either have to enter credit card details (you can remove the card after entering it), or create a new account (and this time follow the instructions on the above link)

Need old keyboard to boot off start-up disc or enter safe mode

I have one of the first Core Duo iMacs, purchased on July 2006. I have since replaced the original keyboard with the aluminum version that is now standard issue. Whenever I need to boot from the start-up disc to repair my hard disk, or enter safe mode, I always need to go back and plug in my original keyboard. Is there some known hardware compatibility issue with these older iMacs and the aluminum keyboards? I'm glad I still saved the old one.

Are you referring to the new bluetooth (wireless) keyboard or are you using a wired version?
Message was edited by: Barbara Daniels1

Bootcamp windows 8 will not enter safe mode

My bootcamp windows 8 will not enter safe mode. I've tried press Fn + F8 multiple times.

http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including- safe-mode

Can't enter safe mode in XP

Im5tryingtoenter safe mode on an older Toshiba Satellite A105 laptop, model no. PSAU-813000. I re had reinstalled the XP OS earlier this year and the computer appeared to run as new.however, I never tried safe mode after the installation. I'm trying to enter safe mode so I can eliminate the sign in password. As the computer is booting up I press f8repeatedly but it keeps booting up to the signin screen.. any ideas? Thanks.

If you can boot into Windows XP...
1. You can get into Safe Mode this way. Open the System Configuration Utility (msconfig.exe), check /SAFEBOOT on the BOOT.INI tab, OK, and restart Windows.
2. You can bypass the Welcome (Windows sign-in) screen this way. Open the hidden User Accounts dialog by running this..
control userpasswords2
On its Users tab, clear the check box for...
Users must enter a user name and password to use this computer.
You'll be asked for your password.
-Jerry

HT201365 i dont want to enter my id and password every time i have go into my phone.

i dont want to enter my id and password every time i go into my phone? garbage that idea its a pain.

Go to Settings > General > Auto-lock and change the setting to "Never".
Then there will be no lock on your iPhone.

HT1338 I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my h

I have macbook without a firewire port, I have usb 2.0 port, now my os is not working I can not get through apple logo loading , I can not enter safe mode, I can only enter one user mode, how can I backup my data, I have very important data in my hdd

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Server won't finish booting...can't enter safe mode...won't read install

My G4 XServe starts to boot, I see the Apple, then it shifts to the Starting Mac.... screen, and then it just stops on an empty blue screen. I see the server going through and checking each of the four hard drives, system activity lights do their thing, but the blue screen remains.
I cannot get the server to boot from the install CD or DVD (using 10.4.8 and have the 10.4 disks). It will not let me set startup mode by holding down the system identifier button when powering up. I can't get it to accept holding down the C or D keys on the keyboard when starting. When I hold down the shift key it goes to the console and asks me to log in there instead of entering safe mode.
Any ideas or suggestions?

Are you able to start in Verbose mode?
Hold down "apple" and "v" at startup. This will take you through a logging bootup and into the GUI. Try and see if you can mount it to another machine via firewire disk mode. From there you can check it with Disk Utility or Diskwarrior (provided it mounts).
Or try start in single user mode "apple" and "s" and when you get to the prompt "#" type "fsck -f"
See if any volume repairs are conducted. If they complete or if it works you type "reboot" when done and the server should restart.
Good luck

I can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear

# Question
i can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

IMac shutting down on startup - Can't enter safe mode as wireless keyboard doesn't connect quickly enough

Hi all,
I was planning to use bootcamp to install Windows 7 on my mid-2010 21.5" iMac.
Bootcamp recommended I usk disk utility to repair the drive. I had a snow leopard install disk in the drive, (I didn't realise Lion already had it's recovery tools built in to the hard drive.)
Disk utility said it can't repair the drive and recommended I start backing up my data (because the hard drive could be about to fail). Fine, so I restarted, with the intention of backing up everything (all my work for the last 12 months). So I press the power button, grey screen comes up, then the apple logo, then a progress bar appears (found this odd at first, but later found out it has something to do with disk utility and a bad hard drive) it gets to around 20% and then all power is cut from the iMac and the hard drive stops/everything powers down.
Now, I can't seem to get my iMac to boot into recovery utilities or into safe mode because it doesn't connect to the wireless keyboard in time before it shuts down. So, if I use a wired keyboard (I have a dell USB keyboard that I can take from the office), will I be able to boot into safe mode?
Also, if the disk in drive is causing the problem, then I can't remove it because the wireless keyboard won't connect/register any keypresses.

Ok so, status report:
Wired keyboard is non responsive when I plug it in before/during boot. So i guess it needs to be plugged in before the iMac shut down. That's that out the window.
Plugged in headphones and I can't hear the startup chime so don't know when to start holding buttons.
To make matters worse, the wireless keyboard is no longer paired with the iMac, getting a green blinking light which indicates it wants to connect to a computer or device.
So I can't enter any commands whatsoever, can't remove the disk in the drive or boot safe mode. It's my worst nightmare.

User profile service failed the logon And cant enter safe mode

I'm getting this problem with a T510 thinkpad. Ive searched for this and found that the only solution seems to be to start the computer in safe mode, but when I use F8 the computer goes into:
Error 0210: stuck key 42
press F1 to start up.
then F1 leads to the BIOS setup utility, with no option for safe mode.
when I try the "ThinkVantage" button, i get:
Startup Interruption Menu
ESC to resume normal startup
F1 to enter the BIOS Setup Utility
F12 to choose temporary startup device
again, no safe mode option.
Using F12 during startup gives me:
Boot Menu
2: ATAPI CDO: Optiarc DVD RW AD-7700H- (S2)
4: ATA HDDO: HITACHI HTS723232A7A364 - (S1)
5: PCI LAN: IBA GE Slot 00C8 V 1351
<enter setup>
in other words still no safe mode!
I'll confess I'm no techie, in fact it's taken me a loooong time to type this on a tablet...but any help would be much appreciated.
cheers

Hi
please check this KB article:
Error message when you log on to a Windows Vista-based or Windows 7-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded"
http://support.microsoft.com/kb/947215
"A programmer is just a tool which converts caffeine into code"
Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

I dont want to enter password each time i log on

I do not want to enter password each time I log on to my computer

Hunter1744, welcome to the forum.
If you are using Win7, you can go into Start. In the "Search programs and files" box at the bottom type "cmd" and hit Enter. This will open a terminal window. Type "netplwiz' next to the prompt and hit Enter. This will bring up a box titled User Accounts. Uncheck the box next to "Users must enter a user name and password to use this computer." It will ask for a Password and to verify the Password. Once you do this, you should not have to logon with a Password in the future.
When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

9360 dont want to enter safe mode to start. What sould I do?

Similar Messages

Maybe you are looking for