9360: Uncaught exception: Failed to start UMP:(9) executable not found

Hi all,
When i open the browser im getting the exception
Uncaught exception: Failed to start UMP9) executable not found.
Not only the browser almost all app showing error. When i open games and try to open word mole getting exception
java.lang.RuntimeException. failed to intialise game resources. Missing graphics module: net_rim_device_appa_games_worldmole_graphics_480x360.
When i open BrickBreaker getting exception
java.lang.Error
and i also checked software updates, but the device is already updated. Device OS 6.1 Bundle 298

Hey SumiGhosh,
I would suggest to do a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320, please test before restoring any data to the device.
If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
How to use BlackBerry Desktop Software to restore data to a BlackBerry smartphone from a backup file
http://btsc.webapps.blackberry.com/btsc/KB10339
If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
Thank you
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Webkit unavailable. Failed to start UMP:(9) executable not found. bold 9790

i am unavailable to open inbox as well browser. message displayed on screen : shared webkit instance unavailable. failed to start UMP: (9) executable not found. as well it has start rebooting itself once till now. kindly help out me.
Thanks

jawediqbal wrote:
i am unavailable to open inbox as well browser. message displayed on screen : shared webkit instance unavailable. failed to start UMP: (9) executable not found. as well it has start rebooting itself once till now. kindly help out me.
Thanks
I suggest you do a clean Reload or Update of your Operating Sysytem. Go here for instructions: How To Reload Your Operating System
Goodluck!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

HT1199 I updated Itunes on my PC and now when i try to open Itunes i get a error message saying "application failed to start because MSVCR80 was not found" then whenI close that pop up I get a error message saying "windows was not installed correctly Erro

I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659)

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?

That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.

This just came up : Failed to start MSVCR80.dll was not found. I tried re-installing it a few times and same thing.

This just came up : Failed to start MSVCR80.dll was not found. I tried re-installing it a few times and same thing.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99601)

TS3212 I tried to reinstall itunes on my PC and got "Service 'Apple moble Device' failed to start. APSDAEMON.exe failed to start because MSVCR80.dll not found

I installed the latest iTunes update from Apple on my PC. I then received an error when launching iTunes that I the "APSDAEMON.exe was unable to locate component. ...Failed to start because MSVCR80.dll was not found".
During install, I got a message that itunes install was complete nut then I got a message that "itunes not installed correctly. Error 7 (windows error 126). Another error message received was "service 'apple mobile device' failed to start. verify you have sufficient privileges to start system.services.
At this point, iTunes icon is on my desktop but cannot launch iTunes.
Need help!

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

HT4145 Airport failed to start-dnssd.dll was not found-what to do?

My ahe app may fix this problemirport extreme failed to start because dnssd.dll was not found-re installing the
app may fix this problem-what do I do?

I suggest that you start by reviewing the following About.com article. It will help you troubleshoot the missing Dnssnd.dll file.
If the issue is related to an AirPort Extreme base station, the cause may be a missing or incomplete installation of Bonjour for Windows. In this case I would recommend downloading and installing the latest version directly from Apple here.

Soundbooth CS3 failed to start -preminfo.dll was not found

Soundbooth CS3 starts with error - This application has failed to start becase preminfo.dll was not found.
Vista x64 SP1
Adobe CS3 production premium ultra
Reinstall Soundbooth CS3 das not help. Premiere Pro CS3 works fine.
Tank You.

C:\Program Files\Adobe\Common\Plug-ins\CS3\MediaCore
Production Premium apps (PPro, SB, AE, Encore) will try to load plugins placed in the above folder. This is good and bad. It's good because you place them in one location and they are shared. It's bad because if the plugin was written specifically for peremiere, it may not work correctly in Soundbooth.
C:\Program Files\Adobe\Adobe Premiere Pro CS3\Plug-ins\..
Plugins placed in the premiere folder only get loaded in to premiere.
Usually plugin manufacturer decides where they should go and you shouldn't have to worry about it. I recommend not moving them around unless there is a problem with them.

Why am I unable to connect to iTunes. Repeatedly get "App failed to start because MSVCR80.dll" not found and Error 7 -windows error 126.

iTunes won't start. Get error message.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Clusterwide exception: Failed to start dependent interface ''caf/eu/gp/api'

Hello !
We are working with SAP Netweaver 2004s SP11 with a local repository. We are trying to deploy a web dynpro project
using the guided procedures api. But we have a problem at deploy time :
Finished with warnings: development component ... :Caught exception during application startup
from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred
while starting application ... and wait. Reason: Clusterwide exception: server ID 1117550:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception:
Failed to prepare application ... for startup.
Reason=Clusterwide exception: Failed to start dependent library ''caf/eu/gp/api/wd'' of application ...
Status of dependent component: STATUS_MISSING.
We have already added the dependencies in the project, and the library references in the project properties.
Has anyone already encountered this problem ? I thank you in advance.
Best regards,
Romain

Hi Romain,
What Piyush has replied in his second post above, i wish to another thing to it.
His is right in saying that we need to check run time, deploy time, and build time as dependency types. But once you check them and click on finish, try again seeing the properties of that Used DC which you just added. You will see that only Deploy Time Dependency Type is "true", all the others are false. You need to edit that Used DC and then again check all three build time, deploy time, and run time. Now if you see the properties, you will see that these three are set to true. Don't know why this happens, but this does happen.
See page 13 and 14 of the following doc:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50d74ada-0c01-0010-07a8-8c118d408e59">Implementing a Web Dynpro Callable Object which Implements the GP Interface</a>
See this entire doc, may be it helps.
If your problem still doesn't get solved, gve me your email address, i will send you another doc for creating a callable object from a web dynpro application.
Bye
Ankur
Do reward points for helpful answers!!

Failed to start message bus: Could not get UID and GID for username "d

Today ive updated my system and got this mesage on boot
Failed to start message bus: Could not get UID and GID for username "dbus"
My keyboard doesnt work..not on usb or ps2.
After 2 years over using arch on stable repo i got this very ugly bug...S***
ill use minimal cd to reinstall core...it seems i cant get on tty working

phoenix, don't post in old threads: http://wiki.archlinux.org/index.php/For … Bumping.27
Try reinstalling dbus-core - if that doesn't work, start a new thread.
Closed.

Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
Raviteja

Hi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K

Exception :Provider org.apache.xerces.jaxp.SAXParserFactoryImpl not found

Hi All,
I run my application on Redhat Linux 2.4.9-e.27smp using java appname. I'm using JDK1.4.2 and am not using any app server. The app seems to run just fine for a few hours and then I start getting Exception :Provider org.apache.xerces.jaxp.SAXParserFactoryImpl not found exception out of blue. I run the app with following parameters -
java -server -XX:+UseAdaptiveSizePolicy -Xverify:none -Xms512m -Xmx512m -XX:+UseParallelGC -XX:ParallelGCThreads=4
I suspect this has to do with garbage collection and can't replicate this on will. I wonder if anyone has come across similar issue and is able to point me to the right direction.
Thanks for any help,
Vishal Bhasin

Quick question. I am receiving the following error too:
Provider org.apache.xerces.jaxp.SAXParserFactoryImpl not found
I am getting this error intermitently. Do you have any idea why this would happen. I am using an add on to a program.
Thanks,
Joe

Tecra M9 - TPSMain.exe cannot start because CpePerf.dll not found

Hi and help,
have searched the web and found other forum threads with similar issues.
Tried all the suggestions to no avail. I am not great on the computer but can find my way around. Anyway....
After login messge following messages pop up in succession, along the lines of : TPSMain.exe cannot start because CpePerf.dll not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found
Computer works fine but Power Saver does not auto start and neither can i select it to from control panel.."toshiba power saver is not running",
so select it from Power options..."failed to start as CpuPerf.dll is not running"
Did all the searching on net and followed all advice... i.e. unistall power saver in safe mode, unistall toshiba common utilities neither can unistall fatal error 0x7e
So download Ccleaner, run checks, unistall with Ccleaner same fatal error.
Been on Toshiba support and tried to install Power Saver......same problem won't install .
So help help help if possible.
Computer is working fine but messages popping up are annoying and i would love power saver to prolong battery.
Tried system restore, though i doubt this affects the files...another problem "system restore could not complete"...tried this several times and cannot system restore either....what is going on???????
any help please
Tim

Cheers for the advice Andrei,
so you suggest there is nothing i can do other than restore from Toshiba recovery disc. Do you think somebody with a bit more knowledge could do sort it out with a less drastic approach..i.e is it worth taking it into a shop? Or do you think they will just have to go down the same route?
If i follow your plan is it just a simple case of downloading all my docs, photos, bookmarks to an external hd and then inserting the recovery disc and following intructions.?? I guess this disc then formats the HD and then reinstalls all the components the laptop came with??? is it infact a drastic approach, or quite simple as a procedure...what do i stand to looose?
Also how do i save xp as this is a version i installed when working/ using my laptop for my previous employer and i no longer have access to the discs/product key.
also could you confirm if this procedure would sort out system restore. I have tried restoring again to several restore points and the procedure will not complete, so this function is definitely not working anymore.
Sorry for more questions but as you can see this is not familair territory for me!!
many many thanks
Tim

Exception in thread... Table not found...CONTROLEVENT

The following problem is reported when trying to install the Trial Version for Vista (SAPNW7.01ABAPTrial).
The instalation dialogue finishes and results in a reference to an error in the log which is in no way helpful and a popup dialogue which says:
Exception in thread... Table not found...CONTROLEVENT.
Anyone have any ideas how to get this to install correctly?
I have watsed plenty of time trying to install this. Its such a shame its so difficult to get this software to work.

Are you trying to do something related to IDOC/Partner profile related responsibilities?.

9360: Uncaught exception: Failed to start UMP:(9) executable not found

Similar Messages

Maybe you are looking for