9380, updated and now red light flashing and won't turn no!

Hey,
Can anyone help???
Did a software update tonight, now my 9380 won't turn on.
Nothing, not a dodo, apart from the red light blinking twice. Not even showing that it;s charging. Have taken battery out etc, but still nothing!
Arrrrrrrrrrrrrrrrrrrgh!!!
Cheers
Gem

Hi and Welcome to the Community!
(Credit JSanders)
There are two methods of recovery for you to try:
One:
Open Blackberry Desktop Software & Connect your device with PC using USB cable, without inserting battery.
You will get three option Retry, Update Or Cancel, then click on update.
Once it is to the stage of the update "initializing handheld", then insert battery.
If this does not work, and you remain stuck on the backing up the Social Feeds database, go to the second method below.
Secondly:
Start your BlackBerry in Safe mode. Article ID: KB17877 How to start a BlackBerry smartphone in Safe Modehttp://www.blackberry.com/btsc/KB17877
Connect to the BlackBerry Desktop Software and allow your handheld to connect. If you are prompted to upgrade, cancel the upgrade for later.
IF you cannot connect or your Desktop Software does not recognize your device while in Safe Mode, please follow the directions here to force the detect:  Article ID: KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
Go to Device > delete > SELECT DATA > select to delete both the Social Feeds and Smart Card databases, and follow the remaining prompts to complete it.
Now, you can return and click to upgrade the device through the Desktop Manager, or reboot the BlackBerry in normal mode and continue the over the air upgrade.
If these do not work, there may be one even more drastic thing to try...
KB27956 How to recover a BlackBerry smartphone from any state
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

I updated my Apple Tv and now the light flashes, but wont turn on

I updated my Apple Tv and now the light flashes, but wont turn on,I have unplugged and still will not work

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.

8700 will not start,red light flashes and hourglass comes on and off

I have an 8700g Blackberry phone and I mistakenly downloaded an application that is only supported by software version 4.0 or greater. ( my phone had software version 2.2? ) . I had to replace the battery today and when I put in the new battery, it tried to start up but the red light comes on and the hourglass flashes on and off but after two hours it will still not start up. What should I do?

Kendal wrote:
Hi there,
My bb did the same thing, but when i did what you said, the app loader said that there is a fatal error, and that the code is [A:0x0000000E]; and a red light flashes twice in quick succssion on the bb, can you please help me out here? thanks K.P. :-)
Hi and Welcome to the Community!
Hmmm...that sounds very bad. But, let's try some things anyway...a total wipe and reload, using one of the following utilities:
http://forums.crackberry.com/forum-f3/how-wipe-jl_cmder-53502/
www.bbsak.org
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My BB won't turn on the red light flashes and the key's light up

Hi
I have read all posts relating to my problem, but one thing my BB won't do is resgister on my computer. The phone will not turn on, has the red light flashing and the keys light up, but the screen will not come on. I have tried taking the battery out, charging it all night, all the recommended/ideas from this sight, but no joy. I have only had this phone since July last year. I haven't been able to try updating phone etc as it won't register on my or my husbands computer please help
Louise

Hi,
The way you presented it made me think it had just happened.
So you have had the phone since July has it ever worked?
Most likely you are missing some or all of your device OS and you'll need to reload the device.
Because the phone can't generate enough signal you will have to "force detect it". I've attached the link below. If you want to proceed I'll need what version of Device OS and what version of desktop manager software.
Thanks,
Bifocals
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB03295 How to verify which version of BlackBerry smartphone software is installed on the computer using BlackBerry Desktop Software
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on

trying to turn on my HP compaq d330 but red light flashing and beeping and nothing comes on help a newbie please
This question was solved.
View Solution.

You can try removing and reseating the memory and see if that works.
If that doesn't work, remove all but one memory module (if the PC has more than one), and see if the PC runs normally with one memory chip. If it beeps, remove and replace with the memory you removed and keep doing that until you find the bad memory chip.

HT3180 I just updated my Apple TV 2 and now it is flashing and not working at all. Help

I just updated my Apple TV 2 and now it is flashing and not working at all. Help

I just did the update to version 5.2 on our ATV2 and now I'm having the exact same problem as the OP- all attempts to access any iTunes services i.e. Movies or TV result in dropping back to the ATV Main menu. Per Winston's suggestion, I logged out of iTunes and then tried to log back in. I am getting a message "the server is not responding- please try again later".
FWIW- all my non-iTunes services on the ATV are working fine- i.e. Netflix and YouTube.
Sounds like the update has overwhelmed the Apple servers.
Dave

HP desktop won't start, red light flashing and beeping, loud fan

Yesterday it was working just fine. I turned it off for the night and when I tried to turn it on this morning, a red light was flashing and beeping as well as the fan making a loud humming noise. I've read the the beeping and flashing means something. I didn't keep track of the number of flashes and beeps though. After the beeping and flashing I turned the computer off then back on. This time there was no red light, flashing, or beeping. Nothing appeared on the monitor either. After about 10-20 seconds of it being on, the fan started to hum really loudly again.
It's an HP Compaq dc7900. I've only had it for about 3 months and it was fine up until now.
Any help? Thanks.

Hi
I'v checked the specs for your HP and Acer machines and yes it will be fine to cross over RAM modules they are identical in speed and architecture . Please don't forget the last post about removing the sources of power before you go inside the PC to check RAM . Other thing is if your HP has more than one RAM module remove only one stick first and try to boot . If it still won't boot with that module take that one out and try to boot from the other before you look to swap over modules from Acer machine . Don't forget to re connect your monitor to see if you get display with one / two etc modules . Post me back your findings
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

My PS3 turns off randomly and a red light flashes

A flashing red light indicates the console has shutdown due to overheating.
Make sure the cooling vents are clear.
What model of ps3 is it - superslim, slim or original?

A quick suck with a hoover should be your first step.
If that doesn't help, you could open the console up (only if out of warranty), and blow around with a can of compressed air, as suggested .
The next step after that is some pretty major surgery on the console, which I wouldn't recommend unless you are totally confident at messing around with delicate electronic equipment.
See YouTube for examples.

Just upgraded and now phone is DEAD. Won't turn back on even holding down both start and sleep for 15 seconds! Was perfect before...help!

Upgraded my iphone4 2 days ago and now it won't power on at all. It is completly dead. Have tried plugging it in wall and computer. Have tried holding down the power and sleep buttons for 15 seconds... nothing. Please help!

You have done everything correctly so far. Try charging again with the wall charger for at least 30 minutes. Maybe the iPhone will turn on itself. If not then try the Reset again, hold both Home and Power buttons until the iPhone restarts, keep holding for at least 30 seconds if necessary. If still nothing, make appointment with Apple Genius and have them fix or replace your iPhone under Warranty coverage.

Laserjet 2200d used to work fine; now red light on and can't find problem

I have a Laserjet 2200d. It worked fine for years. Suddenly, one day it just stopped working. The red emergency light is on. I can't find any problem. I've tried the usual, like paper jam and shaking cartridge. I recently found a user forum that suggested taking the whole machine apart and adding a drop of oil to the motor shaft in the circuit board of the laser scanner assembly. I even tried that. Didn't make a difference. Anything else I should try before tossing the printer? An old cartridge shouldn't make printer stop, should it? I don't want to buy a new cartridge or spend money on this printer unless I know I can get printer to work.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Red light flashing & phone won't power

So I have a Q5 with a simmilar problem lights is blinking in the pattern; 3blinks, 2blinks, 1 blink. went to pull the battery but there is a big tag on it that says "DO NOT PULL THE BATTERY OR YOU VOID THE WARRANTY". Any hints or am I taking this thing in for a fix?

Hi and Welcome to the Community!
The Q5 indeed has a non-removable battery...so that sticker is authoritative. For such devices, the substitute method is to hold the Up/Down volume keys until the device either shuts down or begins a normal reboot.
You can try to reload the OS and see if that can succeed...either via LINK or (more forcefully) via AutoLoader.
Otherwise, going "in for a fix" might be what you need to do.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT1766 I need help. My iphone 4S was working fine a few minutes ago, and now it is black - it won't turn on at all

I need hlep with my Iphone 4S. Was working fine a few minutes ago - now it won't respond. Just a dead phone. Was totally charged. Won't work when plugged into charger either.

Do a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Red light blinks and phone dosen't get on

firstly my os crashed and faded away and the display turns black.then i reinstalled the o.s 10.3 and now red light blinks and the phone dosen't get on!!

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs. If it fails, please try again but increase the wait time in step 4 to 2 hours, and perhaps as long as 4-5 hours.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
If it still continues to fail, then a forceful OS reload (via AutoLoader) would be my next recommended step.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Phone wont turn on and red light flashing 5 times with pause/s in between

i was charging my phone, after 30 minutes i unpluged the plug from the mains and typed in my password. from there on the phone went completely blank and all i was seeing was a red light flashing. I charged the phone for 12 hours and now i cant see the red light anymore. The only time i see the red light flashing is when i use the usb or the phone charger. At the moment the phone is completely blank i cant switch it on. Also ive tried using the usb which didnt help my laptop doesnt recognise it neither does the desktop manager.
Message Edited by SgtAssassin on 10-11-2009 05:22 AM

Hi and Welcome to the Community!
Without the use of the charging port, tests will be more difficult, and results less definitive. Nevertheless...this sequence is needed:
Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem. Note please that "known good" and "new" are not necessarily the same thing...while rare, a new battery certainly can be defective. The best (and, btw, least costly) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
If the result is that your BB is the issue, then you will need to seek out a local (to you) shop with a qualified BB hardware technician to give you a proper evaluation and estimate. If you remain in warranty, you could instead seek support under those terms (assuming your warranty is not void).
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Phone died and I put it on the charger and the red light keeps flashing.

Phone died and I put it on the charger (wall charger) and the red light keeps flashing. It's been doing that for a little less than an hour, I pulled the batttery twice & get the same light flashing. I also read othe posts and it says to just let it charge for a few hours but i don't think it's gonna work. If you know anything about it let me know please & thank you.

When connected to the charger, is the "no battery" symbol showing?
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage). If it doesn't reboot on the first attempt, leave it several more hours. I've had one charge for two days before it came back to life after an extreme battery depletion. Every 3-4 hours, with the device still connected to the charger, you can remove and replace the battery to see if it reboots.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

9380, updated and now red light flashing and won't turn no!

Similar Messages

Maybe you are looking for