945GT Speedster-A4R Dual monitor problem

I have a 945GT Speedster-A4R. I am trying to setup a dual monitor setup. But it is not working. It displays the same monitor on both screens. The monitors are 19 inch KDS with no DVI. The DVI connector on the board has a converter on it. I have setup the video drivers from MSIs website. THe only thing I can find about this is
http://www.msi.com.tw/program/service/faq/faq/esc_faq_pro_detail.php?L_kind=3&UID=624&NA=945GT%20Speedster-A4R
But this does not help me. Am I missing something?
Shawne

Quote from: Frankenputer on 03-February-07, 02:08:36
Please gives us complete system specs including the PSU brand and the amp specs for each of the rails especially the +12V rail. See my signature as an example. Suggestions on posting and getting better answers.
Hi,
I wil give you a complete system specs below, but i don't think there is an powersupply issue becasue i have testet with 3 different psu.
System specs:
SilenX 460w 0 dBA Luxurae PSU
Intel Core 2 Duo T7200 2.0GHz PC667, 4MB BOXED
MSI 945GT-Speedster-A4R, I945GT, m-ATX Socket-479, SATAII, Intel ViiV, PCI-Ex16
Crucial DDR2 PC5300 2048MB CL5 Kit w/two matched DDR2 PC5300 1024MB CL5

Similar Messages

MSI 945GT Speedster A4R Audio Output Jack Detection Problem

Motherboard: 945GT Speedster A4R (609-9632-01S)
CPU: T2400 1.83GHz Core 2 Duo
RAM: 2x 1GB Nanya PC5300 DDR2 667MHz
Hello,
I've been trying to get two new computers running using these Mobile Core 2 Duo motherboards. I have had 2 of 3 motherboards exhibit the same problem with detecting audio jack activity - when no activity is actually happening.
In the first failure, the board never worked at all. It never detected that a jack was plugged in. In this second one, it worked right for about 2 hours, then flashed some messages saying "Audio Jack has been unplugged", and then it has never worked since.
The Realtek Audio configuration tool now indicates no jack is plugged in when I insert a speaker plug into the light green colored jack. Conversely, the one board of the three that is working correctly highlights this jack in the software app when it detects the plug.
I hate to keep sending these boards back to the seller, but it looks like I have to send another one back. Are these boards prone to having audio jack problems? Is there an easy fix for this? Is it just a connector problem?
Thanks,
James

To reproduce the problem, I just have to leave the machine on for an hour or so. After the driver is installed, a Realtek Audio applet is constantly running, shown in the bottom right corner of the task bar. This applet automatically pops up a windows when it detects any jack activity.
Unfortunately, it just pops up (rapidly, about five times in a row) detecting random jack unplugging and plugging in, when I'm not even touching the machine and not running anything (Windows idle). As soon as I acknowledge the event by clicking 'OK', it pops up another window, and another, until it has finally decided that a jack is not present. Then the sound no longer functions because it thinks no plug is inserted into the analog output jack.
Thanks,
James

945GT-Speedster-A4R problem pc only reboots

i recently bought a 945GT-Speedster-A4R motherboard and Intel core 2 duo processor T7200 (merom, Mobil)
My system reboots after 3 seconds. I have have also testet with a new motherboard and CPU the exactly the same as mention above. but exactly the same issue.. I have also tried with new ram and new powersupply
Is the Intel core 2 duo processor T7200 with merom core compatible with 945GT-Speedster-A4R ?
I'm really frustrated now! can some one help me out?

Quote from: Frankenputer on 03-February-07, 02:08:36
Please gives us complete system specs including the PSU brand and the amp specs for each of the rails especially the +12V rail. See my signature as an example. Suggestions on posting and getting better answers.
Hi,
I wil give you a complete system specs below, but i don't think there is an powersupply issue becasue i have testet with 3 different psu.
System specs:
SilenX 460w 0 dBA Luxurae PSU
Intel Core 2 Duo T7200 2.0GHz PC667, 4MB BOXED
MSI 945GT-Speedster-A4R, I945GT, m-ATX Socket-479, SATAII, Intel ViiV, PCI-Ex16
Crucial DDR2 PC5300 2048MB CL5 Kit w/two matched DDR2 PC5300 1024MB CL5

In search of msi 945gt speedster-a4r (MS-9632) or low power consumption

When and where can I find the msi 945gt speedster-a4r or MS-9632?
Although this board has been announced, appears on the website with specifications, and has been exhibited at tech shows, I can not find it in the USA. Update: MSI, itself, did not return any of my calls or email but one of their distributors, ASI, was very nice and said this board would appear in the USA at end of May 2006. New update: ASI now says end of April.
I want a system that consumes low power yet will run a controller board in a pci-e slot at x4, 8, or 16,
this MSI board looks like the thing: it runs a core duo yonah type processor and has a pci-e x4 slot.
So far, the 975x boards like Aopen have dual pci-e x16 slots but they appear only to work only with graphics boards.
I want to put a raid controller areca arc-1230 into the slot. Areca was very responsible and actually tested the 975 boards to find out that they did not work at this time.

I'm afriad that nobody can gives you a definate answer on your question as this concern many factors to say as in production lines, marketing and distribution.

M93p dual monitor problems; monitor turns off and cannot be turned on again

Hi,
we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5) keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
Maybe there is something wrong with DVI power/DVI signal?
- Monitor independent, as far as I can see
- Independent from Windows energy saving modes
- BIOS updates did not help
[todo]: Try Intel/(AMD?) drivers, let users test.
I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
http://forums.lenovo.com/t5/A-M-and-Edge-Series-ThinkCentre/Dual-monitors-problem-VGA-and-Displaypor... is related.
Anyone?
Thx

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

945GT Speedster-A4R unofficial thread

I just wanted to start a thread every one could share information about your 945GT Speedster-A4R.
What CPUs have you tried?
Did you get into any trouble with them?
What memmory are you using?
The CPU Support list seems to be missing for this board, and a lots of other information so please post everything you would like to share about your motherboard.

Just some information for everyone, the 915GM Speedster-FA4 does not have the same socket as 945GT Speedster-A4R. The 915GM has the so called 479mobile socket, althoug there are 478 pins on the cpu, the naming system is from Intel. The 945GT has the socket called 480, it has the same amount of pins as the 479 but they are keyed a little different. I have been figuring this out for a while there is wery litle information on the web about this and none here on the msi site or on the forum.

945GT Speedster-A4R virtualization support

Hello,
Does anyone know if the 945GT Speedster-A4R BIOS supports virtualization (Intel VT-x)?

Quote from: Bas on 16-December-10, 19:48:13
Did you check if it did?
I don't have the board (that is the reason I am asking - I could buy one but I need virtualization to work). I have googled and couldn't find anything for or against it. The BIOS section on the manual does not show anything relating to Vanderpool or Intel VT or VT-x etc. BIOS release notes didn't mention virtualization.
So, that's why I asked the question here.

945GT Speedster-A4R - and USB 3.0 external drive

Hello
I just got a USB 3.0 external drive, which I wish to connect to the 945GT Speedster-A4R board. However when the external drive is connected, the board will not boot, but hang in the post screen right when initialising memory.
If I connect the external drive after windows log-on, it works fine.
Anything I can do to be able to boot the board with the external USB 3.0 drive already connected ?
Br.

Thanks for the fast reply !
However I don't see that option in the BIOS.
I see the following options:
USB Controller [Enable/Disable]
USB 2.0 Controller [Enable/Disable]
USB Keyboard Support [Enable/Disable]
USB Mouse Support [Enable/Disable]

Dual Monitor problem and an idea

Hey everyone. I use two monitors and when i have iTunes open on the primary one(the laptob monitor) i am able to scroll through my music in iTunes using my mouse wheel. However, when iTunes is opened on the other monitor, scrolling through songs with the mouse wheel doesnt work and i have to do it using the scroll bar. Other applications such as firefox scroll just fine on both monitors. Any ideas??
Also, I couldnt find anywhere to post suggestions so im just gonna do it here. I think it would be nice to be able to save playlists and then be able to load them if you ever have to reinstall itunes or there is some other issue. I know you can just put the music into categorized folders in windows explorer, but that doesnt allow you to have the same song in more than one playlist unless you copy the music file. I dont think it would be very hard to do, just save to some file that stores the file name and location of each song. then upon importing the playlist, it could scan the saved location for that file and add it to the playlist if its there, and if not it could ask you what other folder it should scan in for that song. I think this would be very beneficial for people that create many large playlists that would take hours to recreate.
Thanks for your help,
Adam

[newsreader autoquote deleted by forum host]
I assume you have installed the latest drivers for the card? I have that
card and dual monitors with no problems. By the way, go to the NVIDA
site and download the drivers, not the Sony site as some do. There was a
new version of the driver just last month.
John Passaneau

2014 mac mini dual monitor problem

I just brought a mac mini (Late 2014) i have two displays monitors connected, one HDMI to DVI. and one thunderbolt to DVI. I can have both thunderbolts connected and the problem its the same, when back from sleep ,one monitor doesn't turn on. i have to disconnect one and then both work, it only happens when the mac goes to sleep. on cold restart or turning the mac on, this problem doesn't occur. any help.

I have this same problem too. I purchased the Mac Mini with the intention of running dual monitors. I'm using the HDMI and mini-display/Thunderbolt to DVI. I've also tried MiniDisplay/Thunderbolt to HDMI and I'm experiencing the same problem as angelfromfullerton. Whenever it tries to wake from sleep, it can't decide on monitor arrangement and keeps flicking between the two, making the OS unusable and forcing a reboot... EVERY TIME. I've also experienced the issue once or twice on a cold boot. It doesn't matter which Thunderbolt port is used either.
I'm going to have to return my Mac Mini unless this problem is fixed asap.
Mac Min, OSX Yosemite (10.10).

Dual monitor problem...

I have had my 13 inch macbook connected to my TV with no problems. Recently I unhooked the laptop to travel and when i connected it back to my TV, it only registers as having dual displays. Before I disconnected it, the TV was the only display shown on the computer, there weren't any choices for screen arrangement like there are now. and when i mirror displays the tv image does not fill out the creen as it did before and is all grainy and unappealing. Can someone please help me get back to how it was...so in short, can I turn off the dual moniters and pick just one display to use. I like keeping my computer closed.

Hi maloneisgood,
In order to use just your TV as your main monitor, first uncheck the Video Clone option from the Monitors panel (under System Preferences). Connect your laptop to your TV as if you wanted to use a dual-monitor setup, then Restart your MacBook, close the lid and keep closed. When Mac OS is fully booted, you can open your lid again.
More info on this procedure: http://support.apple.com/kb/ht3131
Hope this helps!
Ramy
Specialist
Apple Store, Carrefour Laval
+Disclaimer: Apple does not formally provide technical support on the Site. However, any information that is provided by Apple or Apple employees is offered on an “AS IS” basis without warranties of any kind.+

TV@nywhere Dual Monitor Problem

I have the regular TV@nywhere card.. Has anyone else had this problem?
I have a dual monitor setup (extended desktop) on an ATI 9000 pro.. At some point over the last few months I began having problems dragging the WinDVR (player) window from one monitor to the other, resulting in the WinDVR process hanging, or an insta-crash of my system. It used to work fine...
I am assuming it might have something to do with one of 30 or so ATI patches that I installed since the last driver update from MSI. On a positive note, with the newest ati patch, the computer doesn't crash anymore, but the app still hangs (except for the audio which will NOT stop, lol)
MSI KT4V-L
Athon XP 2100+
512 MB pc2100
ATI 9000 Pro
MSI TV@nywhere
WinXP Sp1a

Lets start from the bottom and work up. Have you eliminated the cable & splitter hookup as the source of the problem by connecting to a TV? I had a problem similar to that when I first installed my TV@Plus and I had to remove/re-install the software and get a new cable & splitter before I could get it work.. No you don't need to use RG6. It does not hurt to have better but it's not a requirement.

Dual Monitor Problems with Vista

I have a Lenovo T61 laptop running Vista ultimate 32 bit, SP1. I schlep this back and forth from home to work and put it in docking stations at each location. The docking stations have external monitors attached. At work I have a Viewsonic VX2035wm 20" Wide screen, (16:10) monitor with optimum resolution of 1680x1050. At home I have a Viewsonic VA912b 19" standard aspect ratio monitor with a suggested resolution of 1280x1024.
I typically run in dual monitor mode using my laptop display and the external monitor and extend the display across both monitors. Sometimes I run with the laptop display as the primary monitor, sometimes the external is the primary.
When I take my system from one location to another, generally upon boot or resume it recognizes the different monitor configurations and adjusts the display properties accordingly. However, about once a week I have a problem. For example, I shutdown at home, came into work and attempted to boot the system. Upon boot my external monitor displayed a frequency out of range error and did not display anything else. I suspect that the external port was configured to a setting that was not supported by the monitor. It appears that this was the primary display because my laptop only showed the background and the desktop did not display. Since nothing was displayed, I couldn't click the start menu, any icons, etc. I tried to adjust the monitor configuration by right clicking the laptop screen and selecting personalize, but the personalization dialog would not show up and I suspect that it went to the blanked out external monitor.
Please advise on how I can handle this situation. Is there any way to move the display from the external to the notebook when this happens? I noticed that Viewsonic has Vista drivers listed on their web site. Would it help to download and install these? Is there anything else you can suggest?

The main point of posting this topic was to point out the appalling service offered by Adobe but, of course resolving this issue would be nice also.
So here goes;
Dual monitor issue (Applies to CS4 applications; Photoshop, Illustrator, InDesign etc. but not Flash or Dreamweaver or any other manufacturers software).
I have 2 monitors installed with Windows Vista 64bit, using Nvidia Quadro FX 1700:
-1280 x 1024 (primary display on the left) &
-1440 x 900 (on the right)
With a CS4 application maximised in the larger monitor, all the drop down menus display fine, if the chosen drop-down menu is taller than the height of the monitor (fonts, for instance), an arrow appears at the bottom of the menu so that I can scroll down the rest of the menu. If I then reduce the size of the CS4 application window, move it to the smaller monitor and maximised it again, the drop-down menu (which displayed and functioned fine in the primary monitor) is cropped off so I can't access the rest of the menu.
This might seem a minor irritation, but for batch-processing of merged files (the main purpose for having 2 monitors) CS4 makes the 2nd monitor redundant.
Another, less irritating issue (again, only with the applications named above) is that the window when maximised in the secondary monitor 'hangs over' into the primary monitor.

Win7 dual monitor problem

I am using Zenworks 10.3.4 and can only get one monitor to show in the inventory on Windows 7 machines . Xp dual monitors works though .
Is there a reason the agent isn't seeing dual monitors or is this configurable ?

wcole,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Dual monitor problem with MSI 5950 Ultra

OK, I finally got the money to have a dual monitor setup.
I am using a MSI 5950 Ultra card
Soyo 600T Dragon Ultra MB
1 gb Corsair XMS 3500 ram
AMD 3000+ processor
Adaptec 2410SA SATA Raid card
4 Western Digital 74gb Raptors in RAID 0
2 V201S 20.1 inch Viewsonic LCD monitors.
XP Pro OS
I have updated all BIOS/DRIVERS on all hardware.
The problem is when I connect both monitors I get a system freeze. It is random and does not have to be event (ie mouse movement) generated. There are no event log entries. If I disconnect the analogue monitor the freezing goes away. Is this a known bug? If so when can I expect a driver/bios fix on the card? If not can anyone suggest a fix.
I have removed all non-essential cards.
THanks
Steve

Have you installed the driver of the monitor?

945GT Speedster-A4R Dual monitor problem

Similar Messages

Maybe you are looking for