945GT-Speedster-A4R problem pc only reboots

i recently bought a 945GT-Speedster-A4R motherboard and Intel core 2 duo processor T7200 (merom, Mobil)
My system reboots after 3 seconds. I have have also testet with a new motherboard and CPU the exactly the same as mention above. but exactly the same issue.. I have also tried with new ram and new powersupply
Is the Intel core 2 duo processor T7200 with merom core compatible with 945GT-Speedster-A4R ?
I'm really frustrated now! can some one help me out?

Quote from: Frankenputer on 03-February-07, 02:08:36
Please gives us complete system specs including the PSU brand and the amp specs for each of the rails especially the +12V rail. See my signature as an example. Suggestions on posting and getting better answers.
Hi,
I wil give you a complete system specs below, but i don't think there is an powersupply issue becasue i have testet with 3 different psu.
System specs:
SilenX 460w 0 dBA Luxurae PSU
Intel Core 2 Duo T7200 2.0GHz PC667, 4MB BOXED
MSI 945GT-Speedster-A4R, I945GT, m-ATX Socket-479, SATAII, Intel ViiV, PCI-Ex16
Crucial DDR2 PC5300 2048MB CL5 Kit w/two matched DDR2 PC5300 1024MB CL5

Similar Messages

  • 945GT Speedster-A4R Dual monitor problem

    I have a 945GT Speedster-A4R. I am trying to setup a dual monitor setup. But it is not working. It displays the same monitor on both screens. The monitors are 19 inch KDS with no DVI. The DVI connector on the board has a converter on it. I have setup the video drivers from MSIs website. THe only thing I can find about this is
    http://www.msi.com.tw/program/service/faq/faq/esc_faq_pro_detail.php?L_kind=3&UID=624&NA=945GT%20Speedster-A4R
    But this does not help me. Am I missing something?
    Shawne

    Quote from: Frankenputer on 03-February-07, 02:08:36
    Please gives us complete system specs including the PSU brand and the amp specs for each of the rails especially the +12V rail. See my signature as an example. Suggestions on posting and getting better answers.
    Hi,
    I wil give you a complete system specs below, but i don't think there is an powersupply issue becasue i have testet with 3 different psu.
    System specs:
    SilenX 460w 0 dBA Luxurae PSU
    Intel Core 2 Duo T7200 2.0GHz PC667, 4MB BOXED
    MSI 945GT-Speedster-A4R, I945GT, m-ATX Socket-479, SATAII, Intel ViiV, PCI-Ex16
    Crucial DDR2 PC5300 2048MB CL5 Kit w/two matched DDR2 PC5300 1024MB CL5

  • MSI 945GT Speedster A4R Audio Output Jack Detection Problem

    Motherboard: 945GT Speedster A4R (609-9632-01S)
    CPU: T2400 1.83GHz Core 2 Duo
    RAM: 2x 1GB Nanya PC5300 DDR2 667MHz
    Hello,
    I've been trying to get two new computers running using these Mobile Core 2 Duo motherboards.  I have had 2 of 3 motherboards exhibit the same problem with detecting audio jack activity - when no activity is actually happening.
    In the first failure, the board never worked at all.  It never detected that a jack was plugged in.  In this second one, it worked right for about 2 hours, then flashed some messages saying "Audio Jack has been unplugged", and then it has never worked since.
    The Realtek Audio configuration tool now indicates no jack is plugged in when I insert a speaker plug into the light green colored jack.  Conversely, the one board of the three that is working correctly highlights this jack in the software app when it detects the plug.
    I hate to keep sending these boards back to the seller, but it looks like I have to send another one back.  Are these boards prone to having audio jack problems?  Is there an easy fix for this?  Is it just a connector problem?
    Thanks,
    James

    To reproduce the problem, I just have to leave the machine on for an hour or so.  After the driver is installed, a Realtek Audio applet is constantly running, shown in the bottom right corner of the task bar.  This applet automatically pops up a windows when it detects any jack activity.
    Unfortunately, it just pops up (rapidly, about five times in a row) detecting random jack unplugging and plugging in, when I'm not even touching the machine and not running anything (Windows idle).  As soon as I acknowledge the event by clicking 'OK', it pops up another window, and another, until it has finally decided that a jack is not present.  Then the sound no longer functions because it thinks no plug is inserted into the analog output jack.
    Thanks,
    James

  • In search of msi 945gt speedster-a4r (MS-9632) or low power consumption

    When and where can I find the msi 945gt speedster-a4r or MS-9632?
    Although this board has been announced, appears on the website with specifications, and has been exhibited at tech shows, I can not find it in the USA.     Update:  MSI, itself, did not return any of my calls or email but one of their distributors, ASI, was very nice and said this board would appear in the USA at end of May 2006.      New update:  ASI now says end of April. 
    I want a system that consumes low power yet will run a controller board in a pci-e slot at x4, 8, or 16,
    this MSI board looks like the thing: it runs a core duo yonah type processor and has a pci-e x4 slot.
    So far, the 975x boards like Aopen have dual pci-e x16 slots but they appear only to work only with graphics boards.   
    I want to put a raid controller areca arc-1230 into the slot.  Areca was very responsible and actually tested the 975 boards to find out that they did not work at this time.

    I'm afriad that nobody can gives you a definate answer on your question as this concern many factors to say as in production lines, marketing and distribution.

  • 945GT Speedster-A4R unofficial thread

    I just wanted to start a thread every one could share information about your 945GT Speedster-A4R.
    What CPUs have you tried?
    Did you get into any trouble with them?
    What memmory are you using?
    The CPU Support list seems to be missing for this board, and a lots of other information so please post everything you would like to share about your motherboard.

    Just some information for everyone, the 915GM Speedster-FA4 does not have the same socket as  945GT Speedster-A4R.  The 915GM has the so called 479mobile socket, althoug there are 478 pins on the cpu,  the naming system is from Intel.  The 945GT has the socket called 480, it has the same amount of pins as the 479 but they are keyed a little different.  I have been figuring this out for a while there is wery litle information on the web about this and none here on the msi site or on the forum.

  • 945GT Speedster-A4R virtualization support

    Hello,
    Does anyone know if the 945GT Speedster-A4R BIOS supports virtualization (Intel VT-x)?

    Quote from: Bas on 16-December-10, 19:48:13
    Did you check if it did?
    I don't have the board (that is the reason I am asking - I could buy one but I need virtualization to work). I have googled and couldn't find anything for or against it. The BIOS section on the manual does not show anything relating to Vanderpool or Intel VT or VT-x etc. BIOS release notes didn't mention virtualization.
    So, that's why I asked the question here.

  • 945GT Speedster-A4R - and USB 3.0 external drive

    Hello
    I just got a USB 3.0 external drive, which I wish to connect to the 945GT Speedster-A4R board. However when the external drive is connected, the board will not boot, but hang in the post screen right when initialising memory.
    If I connect the external drive after windows log-on, it works fine.
    Anything I can do to be able to boot the board with the external USB 3.0 drive already connected ?
    Br.

    Thanks for the fast reply !
    However I don't see that option in the BIOS.
    I see the following options:
    USB Controller [Enable/Disable]
    USB 2.0 Controller [Enable/Disable]
    USB Keyboard Support [Enable/Disable]
    USB Mouse Support [Enable/Disable]

  • MSI 945GT Speedster will not boot with Authentec Biometric/Fingerprint Reader

    Has anybody else seen POST problems with USB devices attached?  My 945GT Speedster-A4R systems will not POST when Authentec AES2501A Fingerprint readers are attached.  I unplug the devices and the systems work fine.  If I plug the devices in while the system is on, they work fine too and the drivers load.
    For these sensors to be used properly, as user login devices, they really need to be present during startup.  Plugging them in after startup is not really an option.  Any thoughts?
    Thanks,
    James

    First off, I appreciate the responses.  I have some updates, but I still have the problem too...
    MSI Tech Support gave me a beta BIOS to try, and it did not fix the problem (v1.2b5).
    I have not completely pinned out the USB connectors, but I am only using the USB adapter that came with the motherboard.  I am not using any "front panel" USB ports on the chassis.  This motherboard ships with a 4 port USB adapter that takes up a PCI slot in the chassis.  This adapter cables back to the two yellow USB headers on the motherboard.  I would sincerely hope that MSI correctly matched the pinouts of the USB ports to the pinouts on the motherboard - the connectors are keyed and only go on one way.
    I disabled "Boot to Other Devices."  No help.
    I also found another USB device that causes the same hang.  I gave my kids Sandisk Sansa c250 MP3 players for Christmas.  When these devices are plugged in hot, they work fine.  If they are plugged in, and we boot or reboot the system, the machines lock up during POST, just like when the Biometric readers are attached.  It is beggining to look like there is some serious USB compatibility issue with this motherboard.  It is also not just one bad board - I have two systems that behave the same way right now.
    Thanks,
    James

  • Satellite P200-1JR: Display suddenly gets blank only reboot helps.

    Hi,
    I have laptop Toshiba P200-1JR, and I'm satisfied by performances.
    Unfortunately, I have experienced few problems for which I'm not sure if they are hardware (manufacture) or driver (software) problem.
    1. Display sometimes (maybe once a week) suddenly gets blank. Nothing special wasn't done previously, which shpuld be the trigger. Just at once. Only reboot helps.
    2. The same as 1, but previously dislplay just for few second gets crazy. Some side lines (like magnetic interrups) are on screen.
    I've just downloaded bunch of driver updates (haven't applied them yet), but I want to ask before is this problem already known?
    Best Regards,
    Vladimir Stefanovic

    I've applied most of the updates available on Toshiba site for this model, including BIOS update.
    But the problem persists!
    The screen started blinking uncontroled for about 15 seconds, then it become completely blank.
    Then I've pressed Power button [Sleep mode], and again the same button [Wake from sleep], and the machine continued working normaly.
    I'm not sure but I think that previously (before BIOS update) I had to restart the machine in order to get it work again.
    I'm interested if anyone here had similar problem?
    (I ask this because I want to know should I return it to salesman or should I wait for some update)

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

  • 11.0.10 Update Issue -  Problem saving documents - getting message "This document could not be saved.  There was a problem reading this document (21)."  The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

    Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices.  Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved.  There was a problem reading this document (21)."  The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

    Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

    Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
    "Something is wrong
    We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
    Same message if I cut and paste the link.

  • I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

    I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

    I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...

  • I cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

    i cant use the highlight, underline, or strikethrough function in a specific pdf file. The file isnt locked. I used to highlight texts from that file before the latest update. The problem occurs only with that file. Urgent need. Please help. Thanks!

    Chester31,
    Thank you very much for sharing your file with us!  Now that we are able to reproduce the problem at our end, you may stop sharing the file on Acrobat.com.
    Do you know when this problem (for not being able to add new highlight/strikeout/underline) has started?  Did you update your iOS from 7.x to 8.0 recently?
    We will continue investigating the problem and let you know what we find.
    Thank you again for your help.

  • Backup Problem with only Production Server

    Hi all
    Here i have backup problem in only production server. In my tape drive device all schedule backup of Development  server and Quality Server and Production server . In this i get all backup in Development and Quality server, But in Production server backup was fail and not only one all backup is fail from last 2 days . So can u tell me what is the problem with my production server and how can i find it in production.
    And any hardware issue or OS issue is responsible for this.
    Please help me out.
    Thanks
    Keyur

    Hi,
    Can u pls post us the backup log? Also let us know ur product details like OS, SAP, DB version and also the backup tool(if any).
    Regards,
    Varadharajan M

Maybe you are looking for