945GT Speedster-A4R virtualization support

Hello,
Does anyone know if the 945GT Speedster-A4R BIOS supports virtualization (Intel VT-x)?

Quote from: Bas on 16-December-10, 19:48:13
Did you check if it did?
I don't have the board (that is the reason I am asking - I could buy one but I need virtualization to work). I have googled and couldn't find anything for or against it. The BIOS section on the manual does not show anything relating to Vanderpool or Intel VT or VT-x etc. BIOS release notes didn't mention virtualization.
So, that's why I asked the question here.

Similar Messages

  • 945GT Speedster-A4R unofficial thread

    I just wanted to start a thread every one could share information about your 945GT Speedster-A4R.
    What CPUs have you tried?
    Did you get into any trouble with them?
    What memmory are you using?
    The CPU Support list seems to be missing for this board, and a lots of other information so please post everything you would like to share about your motherboard.

    Just some information for everyone, the 915GM Speedster-FA4 does not have the same socket as  945GT Speedster-A4R.  The 915GM has the so called 479mobile socket, althoug there are 478 pins on the cpu,  the naming system is from Intel.  The 945GT has the socket called 480, it has the same amount of pins as the 479 but they are keyed a little different.  I have been figuring this out for a while there is wery litle information on the web about this and none here on the msi site or on the forum.

  • 945GT Speedster-A4R - and USB 3.0 external drive

    Hello
    I just got a USB 3.0 external drive, which I wish to connect to the 945GT Speedster-A4R board. However when the external drive is connected, the board will not boot, but hang in the post screen right when initialising memory.
    If I connect the external drive after windows log-on, it works fine.
    Anything I can do to be able to boot the board with the external USB 3.0 drive already connected ?
    Br.

    Thanks for the fast reply !
    However I don't see that option in the BIOS.
    I see the following options:
    USB Controller [Enable/Disable]
    USB 2.0 Controller [Enable/Disable]
    USB Keyboard Support [Enable/Disable]
    USB Mouse Support [Enable/Disable]

  • In search of msi 945gt speedster-a4r (MS-9632) or low power consumption

    When and where can I find the msi 945gt speedster-a4r or MS-9632?
    Although this board has been announced, appears on the website with specifications, and has been exhibited at tech shows, I can not find it in the USA.     Update:  MSI, itself, did not return any of my calls or email but one of their distributors, ASI, was very nice and said this board would appear in the USA at end of May 2006.      New update:  ASI now says end of April. 
    I want a system that consumes low power yet will run a controller board in a pci-e slot at x4, 8, or 16,
    this MSI board looks like the thing: it runs a core duo yonah type processor and has a pci-e x4 slot.
    So far, the 975x boards like Aopen have dual pci-e x16 slots but they appear only to work only with graphics boards.   
    I want to put a raid controller areca arc-1230 into the slot.  Areca was very responsible and actually tested the 975 boards to find out that they did not work at this time.

    I'm afriad that nobody can gives you a definate answer on your question as this concern many factors to say as in production lines, marketing and distribution.

  • 945GT-Speedster-A4R problem pc only reboots

    i recently bought a 945GT-Speedster-A4R motherboard and Intel core 2 duo processor T7200 (merom, Mobil)
    My system reboots after 3 seconds. I have have also testet with a new motherboard and CPU the exactly the same as mention above. but exactly the same issue.. I have also tried with new ram and new powersupply
    Is the Intel core 2 duo processor T7200 with merom core compatible with 945GT-Speedster-A4R ?
    I'm really frustrated now! can some one help me out?

    Quote from: Frankenputer on 03-February-07, 02:08:36
    Please gives us complete system specs including the PSU brand and the amp specs for each of the rails especially the +12V rail. See my signature as an example. Suggestions on posting and getting better answers.
    Hi,
    I wil give you a complete system specs below, but i don't think there is an powersupply issue becasue i have testet with 3 different psu.
    System specs:
    SilenX 460w 0 dBA Luxurae PSU
    Intel Core 2 Duo T7200 2.0GHz PC667, 4MB BOXED
    MSI 945GT-Speedster-A4R, I945GT, m-ATX Socket-479, SATAII, Intel ViiV, PCI-Ex16
    Crucial DDR2 PC5300 2048MB CL5 Kit w/two matched DDR2 PC5300 1024MB CL5

  • 945GT Speedster-A4R Dual monitor problem

    I have a 945GT Speedster-A4R. I am trying to setup a dual monitor setup. But it is not working. It displays the same monitor on both screens. The monitors are 19 inch KDS with no DVI. The DVI connector on the board has a converter on it. I have setup the video drivers from MSIs website. THe only thing I can find about this is
    http://www.msi.com.tw/program/service/faq/faq/esc_faq_pro_detail.php?L_kind=3&UID=624&NA=945GT%20Speedster-A4R
    But this does not help me. Am I missing something?
    Shawne

    Quote from: Frankenputer on 03-February-07, 02:08:36
    Please gives us complete system specs including the PSU brand and the amp specs for each of the rails especially the +12V rail. See my signature as an example. Suggestions on posting and getting better answers.
    Hi,
    I wil give you a complete system specs below, but i don't think there is an powersupply issue becasue i have testet with 3 different psu.
    System specs:
    SilenX 460w 0 dBA Luxurae PSU
    Intel Core 2 Duo T7200 2.0GHz PC667, 4MB BOXED
    MSI 945GT-Speedster-A4R, I945GT, m-ATX Socket-479, SATAII, Intel ViiV, PCI-Ex16
    Crucial DDR2 PC5300 2048MB CL5 Kit w/two matched DDR2 PC5300 1024MB CL5

  • MSI 945GT Speedster A4R Audio Output Jack Detection Problem

    Motherboard: 945GT Speedster A4R (609-9632-01S)
    CPU: T2400 1.83GHz Core 2 Duo
    RAM: 2x 1GB Nanya PC5300 DDR2 667MHz
    Hello,
    I've been trying to get two new computers running using these Mobile Core 2 Duo motherboards.  I have had 2 of 3 motherboards exhibit the same problem with detecting audio jack activity - when no activity is actually happening.
    In the first failure, the board never worked at all.  It never detected that a jack was plugged in.  In this second one, it worked right for about 2 hours, then flashed some messages saying "Audio Jack has been unplugged", and then it has never worked since.
    The Realtek Audio configuration tool now indicates no jack is plugged in when I insert a speaker plug into the light green colored jack.  Conversely, the one board of the three that is working correctly highlights this jack in the software app when it detects the plug.
    I hate to keep sending these boards back to the seller, but it looks like I have to send another one back.  Are these boards prone to having audio jack problems?  Is there an easy fix for this?  Is it just a connector problem?
    Thanks,
    James

    To reproduce the problem, I just have to leave the machine on for an hour or so.  After the driver is installed, a Realtek Audio applet is constantly running, shown in the bottom right corner of the task bar.  This applet automatically pops up a windows when it detects any jack activity.
    Unfortunately, it just pops up (rapidly, about five times in a row) detecting random jack unplugging and plugging in, when I'm not even touching the machine and not running anything (Windows idle).  As soon as I acknowledge the event by clicking 'OK', it pops up another window, and another, until it has finally decided that a jack is not present.  Then the sound no longer functions because it thinks no plug is inserted into the analog output jack.
    Thanks,
    James

  • MSI 945GT Speedster will not boot with Authentec Biometric/Fingerprint Reader

    Has anybody else seen POST problems with USB devices attached?  My 945GT Speedster-A4R systems will not POST when Authentec AES2501A Fingerprint readers are attached.  I unplug the devices and the systems work fine.  If I plug the devices in while the system is on, they work fine too and the drivers load.
    For these sensors to be used properly, as user login devices, they really need to be present during startup.  Plugging them in after startup is not really an option.  Any thoughts?
    Thanks,
    James

    First off, I appreciate the responses.  I have some updates, but I still have the problem too...
    MSI Tech Support gave me a beta BIOS to try, and it did not fix the problem (v1.2b5).
    I have not completely pinned out the USB connectors, but I am only using the USB adapter that came with the motherboard.  I am not using any "front panel" USB ports on the chassis.  This motherboard ships with a 4 port USB adapter that takes up a PCI slot in the chassis.  This adapter cables back to the two yellow USB headers on the motherboard.  I would sincerely hope that MSI correctly matched the pinouts of the USB ports to the pinouts on the motherboard - the connectors are keyed and only go on one way.
    I disabled "Boot to Other Devices."  No help.
    I also found another USB device that causes the same hang.  I gave my kids Sandisk Sansa c250 MP3 players for Christmas.  When these devices are plugged in hot, they work fine.  If they are plugged in, and we boot or reboot the system, the machines lock up during POST, just like when the Biometric readers are attached.  It is beggining to look like there is some serious USB compatibility issue with this motherboard.  It is also not just one bad board - I have two systems that behave the same way right now.
    Thanks,
    James

  • Virtualization support is disabled on your Mac

    Installed new OS and now Pararells 8 will not open Windows 7 I get a message that "virtualization support is disabled on your Mac".  Pararells 8 worked great before I installed the new OS.  Have tried uninstalling and reinstalling Pararells 8 with the update, but still can't get into Windows 7

    Information.
    http://kb.parallels.com/113964

  • Virtualization support in Sun middleware

    Check out a new SDN article, "Virtualization Support in Sun Middleware," at http://java.sun.com/developer/technicalArticles/tools/support-vrtlzn.html. It answers the question "Can I deploy Sun Java Enterprise System in the various virtualization environments?" and features Q&As of interest.

    No,
    S1AS7.0 does not support the JMX for user applications. JMX 1.0 is only an internal implementation feature of S1AS7.0.

  • K8N Neo4 Platinum - Is Hardware Virtualization supported?

    K8N Neo4 Platinum - Is Hardware Virtualization supported? If so, where can I find the setting in the BIOS.

    Nevermind, discovered Socket 939 processors do not have/support AMD-V.

  • 945GT Speedster

    I see Newegg now has the 945GT in stock.
     Has anyone seen a review or know if there are any oc'ing options in the bios?
    Will the bios support Merom?

    Quote from: Maesus on 26-May-06, 10:04:08
    Core Duo is not yet Merom, but Yonah. Merom should be "Core 2 Duo"?? I'm not yet confirmed.
    Right, Yonah is Core Duo and Merom is Core 2 Duo. I've had the Aopen mb for a couple of months with a Yonah. I have an Antec micro case and was thinking about putting a Speedster in it with the Yonah I have or getting a Merom ES. If there are zero oc'ing options then I would more then likely pass and get this MSI board: http://www.xtremesystems.org/forums/showthread.php?t=100587 and a Conroe.

  • How to upgrade Compaq 620 Energy Star from non virtualization to virtualization support?

    Dear HP community,
    My Compaq 620 Energy Star notebook with CPU Pentium(R) Dual-Core CPU T4500, not support virtualization. For supporting virtualization, I want to upgrade it, e.g. upgrade motherboard (if necessary), upgrade BIOS, upgrade CPU etc. Please recommend the correct and compatible version/model of parts to be upgraded to enable virtualization in this notebook.
    It is said it is not easy to upgrade the notebook, but I think with the correct tools and approaches, it shouldn't be difficult to upgrade the notebook.
    Thank you very much for your help !

    qiubosu wrote:
    Dear HP community,
    My Compaq 620 Energy Star notebook with CPU Pentium(R) Dual-Core CPU T4500, not support virtualization. For supporting virtualization, I want to upgrade it, e.g. upgrade motherboard (if necessary), upgrade BIOS, upgrade CPU etc..
    Hi,
    Given all those plus labor cost. My suggestion: buy a new machine, a lot cheaper.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • KVM Virtualization support on UCS C-Series

    We have a few UCS-C220-M3 servers, for some reason we don't see that KVM Virtualization running on it.
    UCS-C220-M3S, CIMC FW: 1.5(1b), BIOS: 1.5.1c.0 (Build Date: 01/31/2013)
    I tried to start manually and following error shows up:
    root@QvPC-SI:~# modprobe kvm_intel
    ERROR: could not insert 'kvm_intel': Operation not supported
    Looks like the module is loaded properly:
    root@QvPC-SI:~# lsmod | grep kvm
    kvm                     431315  0
    Then check dmesg output to see if there was any problem:
    root@QvPC-SI:~# dmesg | grep kvm
    [84496.551175] kvm: no hardware support

    Hi Ahmed
    The 2TB limit is due to a VMware 5.0 limitation. If you are deploying a VSM 7.2 ova, then you should be following the below guide as it uses Redhat for the OS as apposed to Suse for VSM 6.3:
    http://www.cisco.com/en/US/docs/security/physical_security/video_surveillance/network/vsm/7_0_1/vm/VSM_7_0_1_Deploy_vm_UCS.pdf
    Cheers,
    Edward

  • Tecra S4 with intel Virtualization support (vt)

    Hi there!
    I just upgraded my BIOS from 1.2 to 3.2 in hope to gain access to those neat intel virtualization feature because I want them to be used with xen so I can run Windows on Xen.
    Unfortunately they aren't available and there is no BIOS option to enable them.
    Anybody able to help? Do I need an special BIOS or something? Can I enable them by an secret code? (had that one on an Gigabyte board :D)
    Big thanks for your help.
    mmm64

    Hmm what CPU do you have?
    The Intel Core 2 Duo CPU *T7* series support the Intel VT but some CPUs of the Intel *T5* series dont support the VT!
    So if you CPU supports the VT then you should find the VT option in the BIOS!
    Best regards

Maybe you are looking for

  • Availability Check at Multiple Plants for the Sales Order line Item.

    Hi Friends, We are having two plants, Plant A and Plant B. Plant A is used to issue the orders to the vendors and stock them, while Plant B is used to manufacture the Product and Stock. When we create the sales order, we want to check the Current Sto

  • ESata on Satellite L550-ST5702

    I just purchased an external eSata hardrive and when I transfer files to it the transfer rate is only as fast (or even slower) than when I use USB. I am using Windows 7 Professional x86. Am I missing drivers or something? How can I increase the speed

  • Can't access mapped drives on network with 2008 Server.

    Hi, I got two servers, 2003 and 2008, the 2003 is now a data and application server, it's roles was migrated on the 2008. While the 2003 is able to map drives on the network, the 2008 can only access drives while Deep Agent 9 Antivirus is disabled. T

  • How can I download a movie onto my iPad without the iTunes extras or in  SD?

    I have been trying to download or transfer some of my movies to my iPad, but with all the new iTunes extras some of the movies are 5GB or more now which is crazy. Is there a way to transfer the movies without these features, so that I have more space

  • 3rd party battries & recall

    Hi, Does anybody know if any third party batteries are implicated in the recent recall? Brand names would be appreciated. Thanks, b.