9500 viewing backed up data
My 9500 is now to be replaced. Does anyone know a way to view the data held in my backup other than restoring it to the phone. I couldn't make the Sync work so I just have the backup file in PC Suite.
I don't think there is a way of browsing modern PC Suite backups. There used to be a way, while the format was essentially a huge ZIP file....
In terms of things you need to restore/backup in general, I've put up a check list at http://3lib.ukonline.co.uk/9500afresh.htm, which may be helpful to someone.
If there's some critical piece of info you need, I suppose you could always ask another 9500 owner to restore your backup and then pick out the files, but that's very messy!
Steve Litchfield
3-Lib (Tips/resources/Info for Nokia smartphones and Communicators) plus All About Symbian
Similar Messages
-
How to Block Viewing Back Dated Data
Dear All,
Please help in the following scenario :
Requirement : To Block Viewing of Back Dated Data.
For Eg : from 2012-2013 we have had data, but management wanted from 2014 April 1st
on wards viewing of data for 2012-2013 year should be blocked except for management
and not for employees or middle level guys.
Suppose if we open FBL3N, this tcode should only allow viewing of 2014 April 1st onward data
and not back dated. I mean to say not only for tcode FBL3N but across all tcodes.
I was thinking of validation @ company code level and date range, but not getting how to proceed.
Abstract Logic :
if company code = '1000' and Date <= '31-3-2013' , do not display data for any tcode and throw error msg "your are not authorized to view data"
Your help will be highly appreciated.
Thank you,
Regards,
MaheshHi,
You can do following :
1. Go to transaction code FBL1N
Enter Company code
Enter Date you want to restrict
2. Click on Save
3. Next Screen
Select Protect field option for posting date
4. Click n Save
5. FBL1N Screen
h
You can see that Posting date has became non editable.
6. Use function module RS_ABAPVARIANT_AUTH. and pass Variant name and User ID.
We hope your problem will get resolved by this methodology.
Regards,
Tejas -
How to view backed up iPhone 3G Data on a Mac Laptop
I've backed up data from a damaged iPhone and now want to view it on my Mac Book. I'm told by Apple that there are some third party software solutions to this. Can any one help?
Thanks in advance!*Wjosten - you're being incredibly helpful thank you!*
I was able to extract the data but now I see files that are clearly messages (most of them with an associated image) but I'm unable to open them. Is there a decoding step Im missing? Or an app that will read these files? Files I see include "message.plist or 7696-0-preview - this last one says its a plain text file but text edit just give me code - not readable text. I have a feeling I'm missing a step.
I feel like a dummy - so thanks for your patience... -
Viewing backed up Blackberry data
This is going to be areally stupid question I know. BUT! I have backed up FULL from my blackberry bold 9700 to my laptop, using the blackberry desktop software. It tells me it has backed it up to Documents\Blackberry etc etc. The reason for doing this is that my 16 month old 9700 has just developed what I understand to be the 'White screen of death' and providing blackberry the company don't try and tell me that I've dropped the phone (which I most certainly haven't) I am hopeful of getting it sorted under the 2 year guarantee that the guy from 02 has just informed me that I have. (I haven't taken out insurance). The question I have is that I had a number of items in the memo section of my blackberry that I would quite like to retrieve but they don't seem to have backed up! bearing in mind that I can't see anything at all on my 9700 screen (apart from white of course) is there anyway I can get at or back up my 'Memo notes'???????
Hello,
Here is your other thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Viewing-backed-up-Blackberry-data/m-p...
This post will be moved there. To find any of your threads, just click on your username...it's a link...and there will be a list of all of your posts.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to view the key mapping when viewing Hierarchy in Data Manager
Hi! I previously posted a question on doing value mapping using the hierarchy code rather than the name. I have got that working now using concept of remote key. When I first loaded the hierarchy with remote key and check in Data Manager, I can see the hierarchy structure with the key mappings. However, when I subsequently went back to the hierarchy to have a second look, the keys are gone. Does anyone know how I can view hierarchy in Data Manager with the key mappings?
Cheers!
SFHi,
Go to Record mode, and open Hierarchy table. Now to select click on any hierarchy node record and then right click and select "Edit Key Mappings". This will show you existing keys as well as allow you to manually modify keys. You can only Check Remote keys on hierarchy in Record mode and in Hierarchy Mode "Edit Key Mappings" option will be disabled.
Please revert if you face any issue.
Regards,
Shiv -
My Dear Friends,
Would you let me know how to back up data?
I am working on data management especially for custom & LIS tables.
I would like to know how to backup data, and also in which cases, data can not be backup, what is the reason for deleting without backup and so on.
I appreciate it if you give the answer in detail.
Warm Regards,
Hari.MDear Reddy,
Client his requirement is to delete few fields in tables in Developement, Quality& Production system?
I giving following his requirement pls analyse & guide me Reddy.Pls read under.
Archive Project: Backup table Z8413 BSEG and delete table entries from it
Per our archive project, please help to backup table Z8413 BSEG and then delete table entries from it.
I have checked with Fujitsu team and find out we cannot do it from the Basis point of view.
Hence, please help to delete table s entries using a ABAP code.
Here is a simple code which I created before, just for you reference.
ABAP to delete Table Entries
REPORT ZDT006A.
TABLE T006A.
DELETE FROM T006A CLIENT SPECIFIED WHERE MANDT = 070 AND
SPRAS = F .
COMMIT WORK.
Please do it in TDW/910, 510; TCW/910 and TPW/910 -
View criteria with date field in ADF
Hi ADF Experts,
I have a requirement like.I have a VO with query let say "Select * from Employee"
I have created viewCriteria in that VO like "HireDate between 'abc' and 'XYZ'.
In AMImpl class I have written, one fuction to apply viewcriteria on VO and execute query.
Expose that function as service method, and execution form backing bean.
It is working properly for all other column except the date field.(May be beause of date format, as we cannot apply To_Char, or ToDate in view criterai for date format)
Tried all possible combination but no luck
Please helpHi,
The below link might be helpful for you
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/59-table-filter-by-data-range-176653.pdf
Thanks
Prabhat -
10.1 AC Remediation View Says No Data Found while Business View Shows Plenty
We are upgrading to AC 10.1 from 10.0. We configured gateway connection and I am using Chrome browser. Not sure why user risk analysis in remediation view comes back "No Data Found" while in business view there are plenty of risks. Any ideas? -Thanks so much.
Hi Joerg
Below note can fix your issue.
http://service.sap.com/sap/support/notes/2035538
Thanks
Mani -
How to view forums by date, not "Trending Questions"
I used to be able to view forums by date, now they appear in order of "Trending Questions" so that a discussion that has been inactive for three months now appears before a discussion from a day ago.
Is there a way to get back to the way it should be (by date), or must I live with this poorly conceived "upgrade?" I searched in my preferences and profile, but can't find a way to change this.That's completely counter to the ethos behind the forums. Our goal is to build up as many previously-answered questions as possible, so as to reduce the need to ask the same thing over and over (which is immensely annoying for those who have to keep answering it!). In a perfect world, searching via Google, Community Help or the forums tool itself should always bring up an answer to any customer's questions regarding the use of Adobe products.
For info, the current database size in Jive is not an issue in terms of the user experience - the SQL queries run by a typical user/page session execute many times faster than the data itself can be sent across the networks.
Phillip Jones wrote:
Yes I do. I think it’s a dumb idea designed by someone twiddling their thumbs with nothing to do. If there is no activity on a Subject within two weeks it should moved to a Archive. Then deleted. the less stuff you have to deal with the faster Forums will be. If the subject needs to be covered again bring it up again.
Some postscripts for previous replies in this thread:
"Trending" was taken from Twitter, where it refers to hashtags with high levels of recent use.
The "Trending" pod on the overview page for a discussions space is not identical to the first items in the 'discussions' tab, as it includes activity on the other content panels (documents, ideas, polls, etc.) where those are present. If we sent everyone to the discussions tab, users would never know there's a new document posted (e.g. an FAQ) and would have no way to reach it.
If you prefer a different layout of your set of regular forums, try the Personalized Homepage feature (using the "Your View" button on the forums homepage). -
Viewing the updated date in Address Book
Does anybody know a consistent way to view the "updated date" on an Address Book card if you have lengthy notes for every contact?
In Apple's desire to keep things beautiful instead of functional, they have placed a very light "updated date" status in the lower right-hand corner of each contact card in the Address Book.
However, if you have lengthy notes for that contact, you CAN'T SEE the updated date at all, because the notes obscure the updated date! The ONLY way that we have been able to figure out how to see the updated date is to select all of our notes for the card, CUT the notes to our clipboard, look at the updated date, and then PASTE the notes back into the contact card again.
Ridiculous, right?!
Any ideas on this? ALSO -- while we're on the topic -- does anybody know of a way to show the updated TIME in conjunction with the date?
Thanks,
ScottDoes anybody know a consistent way to view the "updated date" on an Address Book card if you have lengthy notes for every contact?
Other than expanding the size of the Address Book window, there is no way to accomplish that.
does anybody know of a way to show the updated TIME in conjunction with the date?
That cannot be done at the present time, though it's possible that Apple may add that feature or option in the future.
Mulder -
HT1349 How do I view backed up iPhone info through iTunes?
How do I view backed up iPhone info through iTunes without my iPhone being connected to my computer/iTunes?
I am trying to save/back-up the data on my phone (pics, contacts, etc) before I get a new phone. I was told at the store that they can only transfer my contacts to my new phone. I do not want to lose all of the other data on my phone.
-
Can not view 24 hours data in Websphere performance page
We configured EM 10.2.0.5 to monitor Websphere 6.1 on AIX.
Now we can see current data in the performance page.
But when we switch to 24 hours view, there is not any data shown in the page.
Does EM 10.2.0.5 support viewing Websphere historical data?This issue is solved.
The OMR parameter job_queue_processes is set to 0.
It should be 10 or above. -
Hi,
I have loaded the data into an ODS from an External Flat file and executed the job. Can anyone guide me how to view the loaded data in the ODS ?
ThanksHi Madhu,
You can simply Goto Transaction LISTCUBE and give the ODS name -> Execute.
Regards
Hemant -
How do I use Display Dialog to get back a date?
Can anyone tell me how to use Display Dialog to get back a date?
I am using the following code that does not work. It does not accept anything. And I have searched high and low for an answer to my question and found nothing.
repeat
display dialog "When should I remind you (date)?" default answer ""
try
if the text returned of the result is not "" then
set the requested_text to the date returned of the result as date
exit repeat
end if
on error
beep
end try
endrepeat
display dialog requested_text
The code is based on what I found in AppleScript 1-2-3 (page 300). It shows examples for getting text and numbers but not one for dates.
For what it is worth, my goal is to create a script that will convert an email from Evernote into an iCal Reminder. To do so, I want to ask the user (myself) for the reminder's date and time. I am assuming I need to ask for each separately. I also assume that once I get the date and time for the reminder, it should be relatively straightforward to 'make' a 'todo' with an alarm.
Thanks in advance.
-DavidHi David,
Try this:
repeat
set theCurrentDate to current date
display dialog "When should I remind you (date)?" default answer (date string of theCurrentDate & space & time string of theCurrentDate)
set theText to text returned of result
try
if theText is not "" then
set theDate to date theText -- a date object
exit repeat
end if
on error
beep
end try
end repeat
display dialog (date string of theDate & space & time string of theDate)
You might also have a look at this page of the AppleScript Language Guide.
Message was edited by: Pierre L. -
TM backup: can I use two drives to back up data on two other drives?
Hi to all!
I have with me a 1 TB/ Thunderbolt EHD [external hard drive], a Lacie 2 TB/FW, EHD, a Seagate 2 TB/ 2 USB, EHD, a Seagate 3 TB/ 2 USB, EHD and [to be purchased] a Seagate 2 TB/ 2 USB, EHD.
I mainly use my Mac for making HD videos using FCPX.
I am planning to use these drives in the following manner as indicated by the table below:
Drive:
a
1 TB,
Thunderbolt,
Buffalo
b
2 TB/ FW
LaCie
c
2 TB/ 2 usb
Seagate
d
3 TB/ 2 usb
Seagate
e
2 TB/ 2 usb
Seagate backup
[to be purchased]
f
500 GB, internal
Macintosh HD
Partitions
1
1
1
2
1
USAGE:
editing videos, one
active project at a time
mainly for camera
archives, music files,
FCP events, projects
and exported movies
same as the LaCie,
as a backup of data
intend to have 2
partitions of 1.5 TB each;
one partition for personal
data and the other partition
to back up data on the
Thunderbolt [current project]
intend to use this for
TM back up of my
Mac's internal HD
applications, documents etc.
backed up by:
one partition of 'd'
by the 2 TB Seagate
backup 'e'
I would like to know whether I could do these things:
Can I use the TM backup feature in this manner of using 2 separate drive/partition [e/d] to back up data on 2 other drives [f and a]?
Further, I am manually copying files from 'b' drive to 'c' drive; without incurring further expense, can I ensure that whatever I write onto the LaCie [b] gets copied to the 'c' drive automatically?
Any thoughts, suggestions and instructions in these matters are welcome.EXT. DRIVES:
a
1 TB
Thunderbolt
b
2 TB/FW
[LaCie]
c
2 TB/ USB
[Seagate]
d
3 TB/USB
[Seagate]
e
2 TB/USB
[Seagate]
USAGE:
scratch disk
[planning to have
only one active
project at a time]
camera footage
FCPX events, projects
and completed movies
Same as the LaCie,
as it's backup
To be used as TM
backup for my Mac's
internal and also to
the scratch disk.
Planning to have it in
2 partitions: to have
a 'secondary' copy of
my Mac's IHD on one
partition and to have
personal 'net retrievable'
data on the other partition.
'MY
OBSERVATIONS'
my projects are usually
less than 10 minutes
and hence I trust that
work would be fast and in
case of drive failure, I
would be losing only
one project.
I am importing camera footage
primarily into this drive and
being FW, data transfer is
fast.
Am manually copying
files from the LaCie
onto this.
This drive is not a
brand new one, but
has been given to me
by the company's
agent as a replacement
to my earlier 2 TB drive
which had failed.Hope
this also will not fail!
Because of the 'uncertain'
performance of the
3 TB Seagate, I intend
to have a copy of my
Mac's IHD in one
partition. I intend to place only
such data upon the other
partition that I will not be
greatly affected should the
drive fail.
If you can analyse this plan and give your insight upon this matter, I will be immensely happy.
Further, if this proposed use of the 3 TB Seagate is okay with you, I need to know how to remove the Thunderbolt from doing it's temporary role of TM backup and how to coronate the 3TB Seagate as its successor.
FYI, I would be switching off TM from functioning whenever I am editing video; I would be switching it on only after a full editing session.
Another question on my mind is this: do I need to partition the drive 'e' at all?
Message was edited by: somanna
Maybe you are looking for
-
Trouble downloading itunes, error mssg keeps appearing.
Hiya, Just brought a brand spanking new Ipod Video 30gb. As there is no installation cd I had to go online and download itunes. However, everytime I try to download i keep getting a message as follows - "Could not open key: HKEYLOCALMACHINES\Software
-
Has anyone found a lightning to 30 pin adapter where the lightning end is the same size as the cable that comes with the phone? I know there have been some non-apple versions, but I can't tell if they are the same as the Apple versions where the lig
-
HT2905 How do you display duplicates in iTunes 11? I cannot find it.
I downloaded the latest iTunes version, 11, and now can't find "display duplicates" anywhere.
-
Unknown error #2630 comes up and nothing happens when I try to burn a cd. I need help please.
-
How to make WS-I compliant Web Services
What is Oracle's recommended way to develop Web Services that fully conform to the WS-I standards using PRODUCTION RELEASES of Oracle's software (JDeveloper 10G and OracleAS 10G)? This is for a production site and it needs to be supported from Oracle