9500 will not make calls

WHEN I TRY TO MAKE A CALL THE PHONE SWITCHES OFF.
I GET A MESSAGE SAYING "PROGRAM CLOSED",
PROGRAM : TELEPHONE
REASON CODE : PHONE APP
REASON NUMBER : 45
THIS HAPPENS WHEN I USE MY SIM CARD FOR GHANA (I WORK OVERSEAS) IN EITHER OF MY NOKIA 9500s (I HAVE 2) BUT TWO ALTERNATIVE SIM CARDS WORK OK.
I HAVE REPLACED THE AFFECTED SIM CARD WITH A NEW ONE, BUT THE SAME THINGS HAPPEN WITH THE NEW ONE.
HAS ANYONE ANY IDEA WHATS UP?

THANKS A LOT FOR THE TIP, FILED FOR USE IN CASE THIS COMES UP AGAIN. I GOT IT SORTED AT A DEALER (PROBABY DID THE SAME THING)AND IT COST ME $50!! THANKS AGAIN

Similar Messages

  • My phone will not make or receive calls since i did the update to 6.0

    help, my phone will not make calls and i can not recieve calls since the updates

    I updated the IOS 6 a month ago and now the issue arises just today. I can make outgoing calls but unable to receive incoming calls and text messages. When someone try to call me it always says no network coverage area, but eventually the signal bar is full. And I realised that when I'm making an outgoing call, and I used another device to call my phone and it able to receive. But when I'm not calling out, the call unable to receive and it says that Out of Network Coverage Area.
    Please help me...

  • When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    When I get a phone call or text message it will not make the sound. Just vibrate. But the switch is on normal. When I change it to vibrate the volume thing will not show. Nor will my up volume up key work. Is there any way to fix it?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Galaxy S4 will not make or receive calls or texts while connected to home wifi?

    Recently, My Galaxy S4 will not make or receive calls or texts while connected to my home WIFI. The status bar WIFI icon is highlighted and the Connection Bar icon has 0 bars. When I check the WIFI connection in "settings" the status is connected and shows very strong strength. Any time I try to make a call or send a text I get a "no network error message" and basically I am dead in the water as far as cell phone use is concerned. My S4 is my primary phone for home and business use and is very inconvenient when I am missing calls, etc. I have done a phone reset and removed SIM Card as well as a rest. Please advise.

        jlrwillis, I know this would concern me just the same and we definitely want to figure this out for you. How long has this been going on? Since you started experiencing the issue have there been any changes to the device? Software updates, application downloads, or damage to the device? If WiFi is off while at home do you see that you are connected to cellular service? Are you able to make a call that way?
    AdamG_VZW
    Follow us on Twitter @VZWSupport

  • I have problem with concoction i can not make call or sms

    I have problem with my i phone 5 i can not make call and sms do please help me

    I think you don't understand the purpose of this forum. This is a user-to-user support forum. You're not talking to Apple. You're not talking to your cellular carrier.
    One last time and then I'm done:
    You need to call your cellular carrier and get this sorted out. No one here can help you.

  • SPA112 - Can receive but not make calls

    I have just setup an SPA112 at home behind a NAT router and have configured it to a state where I can receive but not make calls.
    It registers fine and remains registered.
    The Line 1 Status indicates a State of "invalid" and a Tone of "reorder" when the call fails.
    I believe I have fiddled with the dial plan sufficient to ensure that the number is not being rejected based on it. My current dial plan is as follows:
         (*xx|000S0|0[2-9][69]xxxxxxxS0|[69]xxxxxxxS0|04xxxxxxxxS0|xxxxxxxxxxxx.)
    I have tried with and without an outbound proxy.
    I have attempted to debug the issue, enabling full DEBUG level logging and setting "SIP debug option" to "full", but all I get in the log when making a failed call is the following:
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 18 and str G.729/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 8 and str PCMA/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 0 and str PCMU/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 2 and str G.726/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 100 and str NSE/8000  chan 0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.112000]  In cordless Driver Codec 112 and str encaprtp/8000  chan 0
         Jul 23 21:35:29 SPA112 daemon.notice msgswitchd[310]:   MSGSWD RTCP Reqt len 12 Data 2,17,7304,0
         Jul 23 21:35:29 SPA112 kern.warning [17339229.268000] 
         Jul 23 21:35:29 SPA112 kern.warning [17339229.268000]  #### RTP STOP Flag set in this channel break ####
         Jul 23 21:35:29 SPA112 kern.warning [17339229.272000]  ###### sock_sendmsg return 172
    I have been unable to find any information about these warnings on th net.
    I can successfully make calls with soft phones configured with similar settings behind the same router.
    What am I missing?
    Any suggestions appreciated, thanks.

    Thanks for the post.
    To clarify, I have been testing the connection by attempting calls to and from my mobile phone. If I use my mobile to call the number linked to the VOIP account that the SPA112 connects to, the call is received fine and the call works perfectly; I can hear voice at both ends fine.
    If I attempt to call the mobile from the phone behind the SPA112 I immediately get a reorder tone as soon as the number is dialed by the SPA112 (i.e. immediately if it matches a number in the dial plan followed by S0 or after the short wait period otherwise etc.)
    On the other hand, if I use a softphone (I've tried MicroSIP and Blink) I can place calls to the same mobile through the same VOIP account from the same LAN behind the same NAT as the SPA112, and the calls are received and bidirectional voice comms works just fine.
    I'm not sure if I can make calls internal to my LAN with this setup... I only have the one VOIP account, and have no SIP server on the LAN (if that's the right terminology, I'm new to this).
    Unfortunately I'm not sure what you're refering to when you talk about ACL and COR. The topology is very straight forward: the SPA112 (along with a couple of PCs) on a LAN behind a NAT router with an internet connection on the other side. The SPA112 is configured as a DMZ, though I don't believed this had any impact for better or worse. In no test for either SPA112 or softphone have I forwarded any ports or changed any router configuration at all (with the exception of the DMZ).
    So the question is why the softphone can place calls fine, but the SPA112 can only receive calls. The dial plan is an obvious answer, but I'm fairly certain I've ruled this out.
    If someone can tell me how to get more detailed logging out of the SPA112 that would be very useful as well.

  • Dell C1765 printer will not make multiple copies in Yosemite

    I have installed Yosemite on my mac mini.  My Dell C1765 color laser printer will not make multiple  copies in Yosemite.  It will do so in Windows.  Any suggestions?

    PS: I forgot to add that my computer is using Windows 7

  • My iphone 4 did not make call. It can receive calls, send and receive sms, internet is working. How can I solve this problem?

    My iphone 4 did not make calls but I receive calls, send and receive sms, emails, etc. How may I solve it?

    I am having the same problem with ios 4.3.5

  • Hp office jet wireless 6500 will not make a copy has been working fine until today.

    operating system imac has nothing to do with this I am just trying to make a copy.
    Just changed the ink today when the problem started. It still will not make a copy I just get a blank page.
    No changes of any kind.
    no error message.
    Thank you.
    This question was solved.
    View Solution.

    I searched other posts and someone suggested that I go to setup on the front of the printer and then tools. I did a cleaning twice and now it makes copies again. The first time I did the cleaning it still did not work, the second cleaning did it. I would strongly suggest to HP that they address this issue in their troubleshooting docs. They don't even mention not making a copy, they only talk about printing, two diiferent issues. 

  • Why is iPhone 6 able to receive calls but not MAKE calls?

    I can use apps, internet, and text and receive calls.But not make calls. 

    Is this a new phone?
    Are you a new customer?
    Did the phone ever make calls?

  • I have an iPad 2 wifi 3G , living in Iran and can not make call , what i should do?

    Hello , I have an iPad 2 wifi 3G , living in Iran , and can not make call , what i should do?

    If you're trying to FaceTime, you must be connected to a wifi source and the other individual must also have wifi and FaceTime. Like Jonathan said, it can't make calls.

  • 2 1/2 yr old macbook suddenly will not make wireless connection

    macbook, two and a half yrs old suddenly will not make wireless connection unless I am sitting directly in front of router. Any ideas?

    Hi bluefatdogs2, and a warm welcome to the forums!
    Probably a loose antenna cable, or the Airport card is dying. but I'd check the first, up under the Battery I think.

  • My iPhone 4s will not make any sound! & Siri gone!

    My iPhone will not make any sound. No ringers, alerts, or even music from my library! I did a reset of all settings thinking it would fix the problem, however all that did was lose my Siri! Very frustrated. All the settings in my phone are correct, and the side button is in the up position. I am able to talk on the phone with no problems, but my speaker phone will not work. Its almost as if my speaker wont make noise?
    Not sure if anyone else has had this problem? If so how did you fix it?!

    Hi megmathieu,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Best of luck,
    Mario

  • Can not make call on face time

    Can not make call on Face time. Mac book pro with mountain lion. Camera ok, face time starts fine, validates apple id ok. Showes list of contacts. when I select one nothing happens!! Face time is on, apple id is ok wi fi is fine (verified with lion macbook pro), also can not access face time preferences, it shows grey????

    try posting in macbook pro forum. or ML

  • "Hello, I bought an iphone from Japan but I can not make calls fom him, his number is 012417004140945. Please help me."

    Hello, I bought an iphone from Japan but I can not make calls fom him, his number is 012417004140945. Please help me."

    Get SIM from the carrier who sold the iPhone.
    Or Get it unlocked from them if they offer unlocking service.
    If it is from SoftBank, they don't.

Maybe you are looking for