9600Pro ATI and KT6

I just did a clean install of XP-SP1 to my 2500+ KT6 board with an ATI 9600PRO video card. All the bios settings for AGB are default. If I install the 3.8 drivers for my card, the machine locks up, displays wacko colors, corrupt test boxes, ets. Just real bad. If I put in the 3.4 drivers from theCD that came with the card, it works fine. Has anybody else had this, or heard of a fix?
All board drivers had been installed prior to the video driver. VIA4.49.
Matt

yes- i've heard a LOT about it. i own a 9600 pro and spent a considerable amount of time getting it to work. i am running Cat 3.7 drivers. turning off fast writes and the smartgart fix was what solved all my problems. regarding your discovery - the latest indication is that some people have had to go back to 3.2 Catalyst drivers to get there 9600 pro to work with stability. the real acid test is to see if you can play c&c generals or other games. if you want to try the 3.2 driver:
http://www.btinternet.com/~a.patel1/driver/mod_cat32/2kxp.zip
also, you can view the huge number of posts regarding 9600 pro problems and fixes at:
http://www.hardwareanalysis.com/content/topic/8596/?o=100

Similar Messages

White Screen: xf86-video-ati and Compiz After Trying fglrx? [SOLVED]

I have an ATI Radeon X1200 graphics card. I recently tired the ATI proprietary catalyst driver (and catalyst-utils) from the AUR. They did not work well for me, so I uninstalled them. I had run "aticonfig -initial" but, after removing catalyst and catalyst-utils I restored my old xorg.conf. For some reason, with xf86-video-ati set up again, compiz starts, but goes to a white screen. I can see and move my cursor. Everything functions normally, I just can't see anything. I right clicked my desktop and created folders as a test. When I rebooted without compiz, the clicks had been received and folders had been created. How can I fix this? I'm using Gnome (if that means anything). Here's my /etc/X11/xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "drm"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "freetype"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "SHP"
ModelName "13ce"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
Option "AGPFastWrite" "yes"
Option "EXAVSync" "yes"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS690M [Radeon X1200 Series]"
BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by hank863 (2009-03-29 03:15:26)

Fixed It!! I had to reinstall xorg, mesa, libgl, xf86-video-ati, and ati-dri for some reason.

[solved] Radeon/Ati and Xorg 1.9

Hi,
since I've upgradede my ati driver (xf86-video-ati) and X to X 1.9 I cannot start my X session, because of the following issue:
Failed to map cursor buffer memory
Fatal server error:
failed to map pixmap -22
XIO fatal IO error 11 (Resource temporarily unavailable) on X server 0:0
In the very beginning after having upgraded, I obtained in addition the error of unknown synaptic devices (mouse and touchpad), but in one of the forum threads it was solved and thus I could fix it.(sry link is missing)
But the one error above is still unsolved, and hinders me starting X. Mr. Google couldn't help enymore.
Downgrading is not possible, because of the missing packages...
I hope one of you can help me get X on the screen.
best,
L-K
[EDIT]
I compiled from git and now xf86-video-ati-git works well. maybe the version in [extra] differs from that git-version in AUR.
Ty for reading.
Last edited by linux-ka (2010-10-26 18:07:35)

The kind people from the IRC channel suggested I add this bit at the very end of the "/etc/X11/xorg.conf" file (instead of "/etc/X11/xorg.conf.d/10-evdev.conf" - tho it would've probably worked that way too):
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us, ro"
Option "XkbVariant" "std"
Option "XkbOptions" "grp:caps_toggle, grp_led:scroll"
EndSection
Apparently it works. I just have to hold AltGr and press s, q , a, i, t, etc to type ș â ă î ț etc. But how do I set it to ; { } ] ' ", etc, like the default behaviour in Windows... ? I would like them to correspond to this layout.
Because this is not the "standard" ("std") version...
I may have to edit the "/usr/share/X11/xkb/symbols/ro" file to map them.
Unless there's a better way ?
Last edited by DSpider (2010-12-11 13:19:16)

Driver for nvidia, ati and intel

Hi,
I have successfully installed archlinux on a usb drive.
It works on every computer with ati or intel graphics card but when I know want to install the nvidia driver it complains about a dependencie of the ati and intel one.
So I have the choice between nvdia or intel and ati. Is there a way to make the usb stick work on ati, intel and nvidia?
Regards

archer42 wrote:How does as example ubuntu solve this issue?
They don't. They use nouveau. You can tell the installer to install the nvidia driver from their "restricted" repository, but you do so at the expense of the intel and ati drivers, just like in Arch.
There's one thing... if you don't care about 3d acceleration, you can simply force-uninstall libgl, intel-dri, ati-dri. Then you can have nvdia, intel and ati at the same time. But 3d accel will only work on nvidia, of course.
Gentoo is (I think) the only one with a full solution - their eselect mechanism. Their mesa and nvidia-drivers ebuilds install GL libs in different places, so they don't conflict. Then eselect switches around some symlinks and plays with the LD_LIBRARY_PATH variable. You still have to manually use eselect ("eselect opengl set nvidia" or "eselect opengl set xorg-x11"), but at least you can have all packages installed at the same time.
Last edited by Gusar (2012-01-18 15:55:50)

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Adobe Acrobat Pro X - Canadian ATI and Privacy Act Redaction Code Sets

Hi,
Could anyone tell me if there are any redaction code sets for the Canadian ATI and Privacy Acts, like the U.S. FOIA and U.S. Pricacy Act code sets?
Thank you.
D.

Hi Dominic ,
Please be informed that by default Acrobat supports the following two redaction code sets .
1.U.S.FOIA
2.U.S.Privacy Act .
Regards
Sukrit Dhingra

FX5500 and KT6

Hi, i have problems with this configuration, FX5500 and KT6, when i install the nvidia drivers, i can't see the video properties because the screen flash and when i try to play somehting the system crash and reboot, when the system star again a message appears and say something about Display Drivers ERROR nv4_disp.dll.
Thanks...

A64 3400+ will kill any Dual Channel K7 mobo.
Hell, the A64 3700+ will stomp, but it only uses single channel RAM as well.
Soooooo, whats the point, save up for an A64, you can transfer all your goodies straight into the A64 mobo, even generic PC3200 RAM.
Plus, with Dual Channel, ya really do have to buy Twin packages of RAM.
A64 is the way, damn, i was even saving up to get one, but oh well, just start saving again!!!!!!!!

ATI and blackscreen death...

community,
I have a HD4250 IGP (R620) w/ athlon 2 x4.
Yesterday, before turning off the pc I've pacmaned Syu, thus making my system inoperable today. I'm using proprietary catalyst drivers, the latest I could find.
Symptoms are : black screen, no keyboard. When I've added acpi=off while doing a manual boot from grub, I've got a screen with dmesg's and a keyboard-unresponsive box.
I'm not able to edit any of the configuration files as of right now, I don't have an optical drive to run a livecd. I've also tried to create an arch-usb to run live, but to no success. I've tried to access the partition w/ windows 7, but the darn thing doesnt recognize ext2/ext3 even though I have the proper tools installed... (when it comes to writing things. reading was easy w/ diskinternals or whatnot....)
Thus, I'm stuck with win7. Help?
Xorg.0.log, grub [acpi=off]:
[ 163.958]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 164.025] X Protocol Version 11, Revision 0
[ 164.025] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 164.025] Current Operating System: Linux p1ohost 2.6.38-ARCH #1 SMP PREEMPT Mon Jun 6 22:49:29 CEST 2011 x86_64
[ 164.025] Kernel command line: root=/dev/disk/by-label/Root ro acpi=off
[ 164.025] Build Date: 30 May 2011 08:18:15AM
[ 164.025]
[ 164.025] Current version of pixman: 0.22.0
[ 164.025] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 164.025] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 164.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 10 09:18:46 2011
[ 164.039] (==) Using config file: "/etc/X11/xorg.conf"
[ 164.039] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 164.072] (==) ServerLayout "aticonfig Layout"
[ 164.072] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 164.072] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 164.072] (**) | |-->Device "aticonfig-Device[0]-0"
[ 164.072] (==) Automatically adding devices
[ 164.072] (==) Automatically enabling devices
[ 164.096] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 164.096] Entry deleted from font path.
[ 164.103] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 164.103] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 164.103] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 164.103] (II) Loader magic: 0x7d3440
[ 164.103] (II) Module ABI versions:
[ 164.103] X.Org ANSI C Emulation: 0.4
[ 164.103] X.Org Video Driver: 10.0
[ 164.103] X.Org XInput driver : 12.2
[ 164.103] X.Org Server Extension : 5.0
[ 164.104] (--) PCI:*(0:1:5:0) 1002:9715:1043:843e rev 0, Mem @ 0xd0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000d000/256
[ 164.104] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 164.104] (II) "extmod" will be loaded by default.
[ 164.104] (II) "dbe" will be loaded by default.
[ 164.104] (II) "glx" will be loaded by default.
[ 164.104] (II) "record" will be loaded by default.
[ 164.104] (II) "dri" will be loaded by default.
[ 164.104] (II) "dri2" will be loaded by default.
[ 164.104] (II) LoadModule: "extmod"
[ 164.136] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 164.146] (II) Module extmod: vendor="X.Org Foundation"
[ 164.146] compiled for 1.10.2, module version = 1.0.0
[ 164.146] Module class: X.Org Server Extension
[ 164.146] ABI class: X.Org Server Extension, version 5.0
[ 164.146] (II) Loading extension MIT-SCREEN-SAVER
[ 164.146] (II) Loading extension XFree86-VidModeExtension
[ 164.146] (II) Loading extension XFree86-DGA
[ 164.146] (II) Loading extension DPMS
[ 164.146] (II) Loading extension XVideo
[ 164.146] (II) Loading extension XVideo-MotionCompensation
[ 164.146] (II) Loading extension X-Resource
[ 164.146] (II) LoadModule: "dbe"
[ 164.146] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 164.147] (II) Module dbe: vendor="X.Org Foundation"
[ 164.147] compiled for 1.10.2, module version = 1.0.0
[ 164.147] Module class: X.Org Server Extension
[ 164.147] ABI class: X.Org Server Extension, version 5.0
[ 164.147] (II) Loading extension DOUBLE-BUFFER
[ 164.147] (II) LoadModule: "glx"
[ 164.147] (II) Loading /usr/lib/xorg/modules/extensions/fglrx/libglx.so
[ 164.166] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 164.166] compiled for 6.9.0, module version = 1.0.0
[ 164.166] (II) Loading extension GLX
[ 164.166] (II) LoadModule: "record"
[ 164.167] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 164.167] (II) Module record: vendor="X.Org Foundation"
[ 164.167] compiled for 1.10.2, module version = 1.13.0
[ 164.167] Module class: X.Org Server Extension
[ 164.167] ABI class: X.Org Server Extension, version 5.0
[ 164.167] (II) Loading extension RECORD
[ 164.167] (II) LoadModule: "dri"
[ 164.167] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 164.178] (II) Module dri: vendor="X.Org Foundation"
[ 164.178] compiled for 1.10.2, module version = 1.0.0
[ 164.178] ABI class: X.Org Server Extension, version 5.0
[ 164.178] (II) Loading extension XFree86-DRI
[ 164.178] (II) LoadModule: "dri2"
[ 164.178] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 164.179] (II) Module dri2: vendor="X.Org Foundation"
[ 164.179] compiled for 1.10.2, module version = 1.2.0
[ 164.179] ABI class: X.Org Server Extension, version 5.0
[ 164.179] (II) Loading extension DRI2
[ 164.179] (II) LoadModule: "fglrx"
[ 164.179] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 164.331] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 164.336] compiled for 1.4.99.906, module version = 8.84.5
[ 164.336] Module class: X.Org Video Driver
[ 164.337] (II) Loading sub module "fglrxdrm"
[ 164.337] (II) LoadModule: "fglrxdrm"
[ 164.337] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 164.351] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 164.351] compiled for 1.4.99.906, module version = 8.84.5
[ 164.351] (II) ATI Proprietary Linux Driver Version Identifier:8.84.5
[ 164.351] (II) ATI Proprietary Linux Driver Release Identifier: 8.841
[ 164.351] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2011 21:43:54
[ 164.351] (++) using VT number 7
[ 164.366] (WW) Falling back to old probe method for fglrx
[ 164.413] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 164.421] (--) Chipset Supported AMD Graphics Processor (0x9715) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 164.423] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 164.424] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 164.424] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 164.424] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 164.424] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 164.424] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 164.424] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 164.424] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 164.424] (II) AMD Video driver is signed
[ 164.424] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 164.424] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 164.424] (II) fglrx(0): pEnt->device->identifier=0x1543c40
[ 164.424] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 164.424] (II) Loading sub module "vgahw"
[ 164.424] (II) LoadModule: "vgahw"
[ 164.424] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 164.437] (II) Module vgahw: vendor="X.Org Foundation"
[ 164.437] compiled for 1.10.2, module version = 0.1.0
[ 164.437] ABI class: X.Org Video Driver, version 10.0
[ 164.437] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 164.437] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 164.437] (==) fglrx(0): Default visual is TrueColor
[ 164.437] (**) fglrx(0): Option "DPMS" "true"
[ 164.437] (==) fglrx(0): RGB weight 888
[ 164.437] (II) fglrx(0): Using 8 bits per RGB
[ 164.437] (==) fglrx(0): Buffer Tiling is ON
[ 164.438] (II) Loading sub module "fglrxdrm"
[ 164.438] (II) LoadModule: "fglrxdrm"
[ 164.438] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 164.438] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 164.438] compiled for 1.4.99.906, module version = 8.84.5
[ 164.449] ukiDynamicMajor: failed to open /proc/ati/major
[ 164.449] ukiDynamicMajor: failed to open /proc/ati/major
[ 164.449] (==) fglrx(0): NoAccel = NO
[ 164.449] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 164.449] (--) fglrx(0): Chipset: "ATI Radeon HD 4250 " (Chipset = 0x9715)
[ 164.449] (--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x843e)
[ 164.449] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 164.449] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 164.449] (--) fglrx(0): MMIO registers at 0xfe9f0000
[ 164.449] (--) fglrx(0): I/O port at 0x0000d000
[ 164.449] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 164.462] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 164.463] (EE) fglrx(0): ACPI: DRM connection failed
[ 164.509] (II) Loading sub module "vbe"
[ 164.509] (II) LoadModule: "vbe"
[ 164.510] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 164.510] (II) Module vbe: vendor="X.Org Foundation"
[ 164.510] compiled for 1.10.2, module version = 1.1.0
[ 164.510] ABI class: X.Org Video Driver, version 10.0
[ 164.510] (II) fglrx(0): VESA BIOS detected
[ 164.510] (II) fglrx(0): VESA VBE Version 3.0
[ 164.510] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 164.510] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 164.510] (II) fglrx(0): VESA VBE OEM Software Rev: 10.94
[ 164.510] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 164.510] (II) fglrx(0): VESA VBE OEM Product: RS880
[ 164.510] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 164.518] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 164.518] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
[ 164.518] (II) fglrx(0): PCIE card detected
[ 164.518] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 164.518] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 164.518] (EE) fglrx(0): ACPI: DRM connection failed
[ 164.518] (WW) fglrx(0): Hasn't establisted DRM connection
[ 164.518] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 164.518] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 164.518] (II) fglrx(0): RandR 1.2 support is enabled!
[ 164.518] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 164.518] (==) fglrx(0): Center Mode is disabled
[ 164.518] (II) Loading sub module "fb"
[ 164.518] (II) LoadModule: "fb"
[ 164.518] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 164.531] (II) Module fb: vendor="X.Org Foundation"
[ 164.531] compiled for 1.10.2, module version = 1.0.0
[ 164.531] ABI class: X.Org ANSI C Emulation, version 0.4
[ 164.531] (II) Loading sub module "ddc"
[ 164.531] (II) LoadModule: "ddc"
[ 164.531] (II) Module "ddc" already built-in
[ 164.764] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 164.764] (II) fglrx(0): Output CRT1 has no monitor section
[ 164.764] (II) Loading sub module "ddc"
[ 164.764] (II) LoadModule: "ddc"
[ 164.764] (II) Module "ddc" already built-in
[ 164.764] (II) fglrx(0): Connected Display0: DFP1
[ 164.764] (II) fglrx(0): Display0 EDID data ---------------------------
[ 164.764] (II) fglrx(0): Manufacturer: GSM Model: 5637 Serial#: 16485
[ 164.764] (II) fglrx(0): Year: 2008 Week: 1
[ 164.764] (II) fglrx(0): EDID Version: 1.3
[ 164.764] (II) fglrx(0): Digital Display Input
[ 164.764] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 29
[ 164.764] (II) fglrx(0): Gamma: 2.20
[ 164.764] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 164.765] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 164.765] (II) fglrx(0): First detailed timing is preferred mode
[ 164.765] (II) fglrx(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.605
[ 164.765] (II) fglrx(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 164.765] (II) fglrx(0): Supported established timings:
[ 164.765] (II) fglrx(0): 720x400@70Hz
[ 164.765] (II) fglrx(0): 640x480@60Hz
[ 164.765] (II) fglrx(0): 640x480@75Hz
[ 164.765] (II) fglrx(0): 800x600@56Hz
[ 164.765] (II) fglrx(0): 800x600@60Hz
[ 164.765] (II) fglrx(0): 800x600@75Hz
[ 164.765] (II) fglrx(0): 832x624@75Hz
[ 164.765] (II) fglrx(0): 1024x768@60Hz
[ 164.765] (II) fglrx(0): 1024x768@75Hz
[ 164.765] (II) fglrx(0): 1280x1024@75Hz
[ 164.765] (II) fglrx(0): 1152x864@75Hz
[ 164.765] (II) fglrx(0): Manufacturer's mask: 0
[ 164.765] (II) fglrx(0): Supported standard timings:
[ 164.765] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 164.765] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 164.765] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 164.765] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 164.765] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 164.765] (II) fglrx(0): Supported detailed timing:
[ 164.765] (II) fglrx(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 164.765] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 164.765] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 164.765] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz
[ 164.765] (II) fglrx(0): Monitor name: L226WA
[ 164.765] (II) fglrx(0): Supported detailed timing:
[ 164.765] (II) fglrx(0): clock: 119.0 MHz Image Size: 473 x 296 mm
[ 164.765] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 164.765] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 164.765] (II) fglrx(0): EDID (in hex):
[ 164.765] (II) fglrx(0): 00ffffffffffff001e6d375665400000
[ 164.765] (II) fglrx(0): 01120103ea2f1d78ead425a455499b27
[ 164.765] (II) fglrx(0): 135054a76b80950f950081808140714f
[ 164.765] (II) fglrx(0): 01010101010121399030621a274068b0
[ 164.765] (II) fglrx(0): 3600d9281100001c000000fd00384b1c
[ 164.765] (II) fglrx(0): 530f000a202020202020000000fc004c
[ 164.765] (II) fglrx(0): 32323657410a2020202020207c2e90a0
[ 164.765] (II) fglrx(0): 601a1e4030203600d9281100001a00aa
[ 164.765] (II) fglrx(0): End of Display0 EDID data --------------------
[ 164.795] (II) fglrx(0): EDID for output DFP1
[ 164.795] (II) fglrx(0): Manufacturer: GSM Model: 5637 Serial#: 16485
[ 164.795] (II) fglrx(0): Year: 2008 Week: 1
[ 164.795] (II) fglrx(0): EDID Version: 1.3
[ 164.795] (II) fglrx(0): Digital Display Input
[ 164.795] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 29
[ 164.795] (II) fglrx(0): Gamma: 2.20
[ 164.795] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 164.795] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 164.795] (II) fglrx(0): First detailed timing is preferred mode
[ 164.795] (II) fglrx(0): redX: 0.644 redY: 0.333 greenX: 0.286 greenY: 0.605
[ 164.795] (II) fglrx(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 164.795] (II) fglrx(0): Supported established timings:
[ 164.795] (II) fglrx(0): 720x400@70Hz
[ 164.795] (II) fglrx(0): 640x480@60Hz
[ 164.795] (II) fglrx(0): 640x480@75Hz
[ 164.795] (II) fglrx(0): 800x600@56Hz
[ 164.795] (II) fglrx(0): 800x600@60Hz
[ 164.795] (II) fglrx(0): 800x600@75Hz
[ 164.795] (II) fglrx(0): 832x624@75Hz
[ 164.795] (II) fglrx(0): 1024x768@60Hz
[ 164.795] (II) fglrx(0): 1024x768@75Hz
[ 164.795] (II) fglrx(0): 1280x1024@75Hz
[ 164.795] (II) fglrx(0): 1152x864@75Hz
[ 164.795] (II) fglrx(0): Manufacturer's mask: 0
[ 164.795] (II) fglrx(0): Supported standard timings:
[ 164.795] (II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 164.795] (II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 164.795] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 164.795] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 164.795] (II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 164.795] (II) fglrx(0): Supported detailed timing:
[ 164.795] (II) fglrx(0): clock: 146.2 MHz Image Size: 473 x 296 mm
[ 164.795] (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 164.795] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 164.795] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 kHz, PixClock max 155 MHz
[ 164.795] (II) fglrx(0): Monitor name: L226WA
[ 164.795] (II) fglrx(0): Supported detailed timing:
[ 164.795] (II) fglrx(0): clock: 119.0 MHz Image Size: 473 x 296 mm
[ 164.795] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 164.795] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 164.795] (II) fglrx(0): EDID (in hex):
[ 164.795] (II) fglrx(0): 00000000000000003a20537570706f72
[ 164.795] (II) fglrx(0): 7465642064657461696c65642074696d
[ 164.795] (II) fglrx(0): 696e673a0a00003a0a0081808140714f
[ 164.795] (II) fglrx(0): 01010101010121396100000000000000
[ 164.795] (II) fglrx(0): 00000000000000003a20765f61637469
[ 164.795] (II) fglrx(0): 76653a2025692020765f73796e633a20
[ 164.795] (II) fglrx(0): 25692020765f73796e635f656e642025
[ 164.795] (II) fglrx(0): 6920765f626c616e6b696e673a202569
[ 164.795] (II) fglrx(0): EDID vendor "GSM", prod id 22071
[ 164.795] (II) fglrx(0): Using EDID range info for horizontal sync
[ 164.795] (II) fglrx(0): Using EDID range info for vertical refresh
[ 164.795] (II) fglrx(0): Printing DDC gathered Modelines:
[ 164.795] (II) fglrx(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 164.795] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 164.795] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 164.795] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 164.795] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 164.795] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 164.795] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 164.795] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 164.795] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 164.795] (II) fglrx(0): Printing probed modes for output DFP1
[ 164.795] (II) fglrx(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync (65.3 kHz)
[ 164.795] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 164.795] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1366x768"x60.0 85.76 1366 1438 1582 1800 768 769 772 795 +hsync -vsync (47.6 kHz)
[ 164.795] (II) fglrx(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 -hsync -vsync (47.7 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 164.795] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 164.795] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 164.795] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 164.795] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 164.795] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 164.795] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 164.795] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 164.795] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 164.795] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 164.795] (II) fglrx(0): EDID for output CRT1
[ 164.795] (II) fglrx(0): Output DFP1 connected
[ 164.795] (II) fglrx(0): Output CRT1 disconnected
[ 164.795] (II) fglrx(0): Using exact sizes for initial modes
[ 164.795] (II) fglrx(0): Output DFP1 using initial mode 1680x1050
[ 164.796] (II) fglrx(0): Display dimensions: (470, 290) mm
[ 164.796] (II) fglrx(0): DPI set to (91, 91)
[ 164.796] (II) fglrx(0): Adapter ATI Radeon HD 4250 has 2 configurable heads and 1 displays connected.
[ 164.796] (==) fglrx(0): PseudoColor visuals disabled
[ 164.796] (II) Loading sub module "ramdac"
[ 164.796] (II) LoadModule: "ramdac"
[ 164.796] (II) Module "ramdac" already built-in
[ 164.796] (==) fglrx(0): NoDRI = NO
[ 164.796] (==) fglrx(0): Capabilities: 0x00000000
[ 164.796] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 164.796] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 164.796] (==) fglrx(0): UseFastTLS=0
[ 164.796] (==) fglrx(0): BlockSignalsOnLock=1
[ 164.796] (--) Depth 24 pixmap format is 32 bpp
[ 164.796] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
[ 164.796] (WW) fglrx(0): ***********************************************************
[ 164.796] (WW) fglrx(0): * DRI initialization failed *
[ 164.796] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 164.796] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 164.796] (WW) fglrx(0): ***********************************************************
[ 164.796] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
[ 164.828] (II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
[ 164.828] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1680) (front color buffer - assumption)
[ 164.828] (II) fglrx(0): Largest offscreen area available: 1728 x 6511
[ 164.832] (==) fglrx(0): Backing store disabled
[ 164.832] (II) Loading extension FGLRXEXTENSION
[ 164.832] (**) fglrx(0): DPMS enabled
[ 164.832] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 164.832] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 164.832] (II) LoadModule: "glesx"
[ 164.832] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 164.964] (II) Module glesx: vendor="X.Org Foundation"
[ 164.964] compiled for 1.4.99.906, module version = 1.0.0
[ 164.964] (II) Loading extension GLESX
[ 164.964] (II) fglrx(0): GLESX enableFlags = 512
[ 164.965] (II) LoadModule: "amdxmm"
[ 164.965] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 164.974] (II) Module amdxmm: vendor="X.Org Foundation"
[ 164.974] compiled for 1.4.99.906, module version = 2.0.0
[ 164.974] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 164.974] (EE) fglrx(0): XMM failed to initialize
[ 164.974] (WW) fglrx(0): No XV video playback available
[ 164.974] (II) fglrx(0): Enable composite support successfully
[ 164.974] (WW) fglrx(0): Option "VendorName" is not used
[ 164.974] (WW) fglrx(0): Option "ModelName" is not used
[ 164.974] (==) fglrx(0): Silken mouse enabled
[ 164.974] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 164.974] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 165.038] (--) RandR disabled
[ 165.038] (II) Initializing built-in extension Generic Event Extension
[ 165.038] (II) Initializing built-in extension SHAPE
[ 165.038] (II) Initializing built-in extension MIT-SHM
[ 165.038] (II) Initializing built-in extension XInputExtension
[ 165.038] (II) Initializing built-in extension XTEST
[ 165.038] (II) Initializing built-in extension BIG-REQUESTS
[ 165.038] (II) Initializing built-in extension SYNC
[ 165.038] (II) Initializing built-in extension XKEYBOARD
[ 165.038] (II) Initializing built-in extension XC-MISC
[ 165.038] (II) Initializing built-in extension SECURITY
[ 165.038] (II) Initializing built-in extension XINERAMA
[ 165.038] (II) Initializing built-in extension XFIXES
[ 165.038] (II) Initializing built-in extension RENDER
[ 165.038] (II) Initializing built-in extension RANDR
[ 165.038] (II) Initializing built-in extension COMPOSITE
[ 165.038] (II) Initializing built-in extension DAMAGE
[ 165.040]
Backtrace:
[ 165.046] 0: /usr/bin/X (xorg_backtrace+0x26) [0x49f556]
[ 165.046] 1: /usr/bin/X (0x400000+0x60cf9) [0x460cf9]
[ 165.046] 2: /lib/libpthread.so.0 (0x7faffabc5000+0xf750) [0x7faffabd4750]
[ 165.046] 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_swlDriOpenConnection+0x3a) [0x7faff77d38ea]
[ 165.046] 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDriOpenConnection+0xd) [0x7faff76c920d]
[ 165.046] 5: /usr/lib/xorg/modules/extensions/fglrx/libglx.so (0x7faff8a3e000+0x1be84) [0x7faff8a59e84]
[ 165.046] 6: /usr/lib/xorg/modules/extensions/fglrx/libglx.so (0x7faff8a3e000+0x1e185) [0x7faff8a5c185]
[ 165.046] 7: /usr/bin/X (InitExtensions+0x99) [0x484b79]
[ 165.046] 8: /usr/bin/X (0x400000+0x229db) [0x4229db]
[ 165.046] 9: /lib/libc.so.6 (__libc_start_main+0xed) [0x7faff9b45f6d]
[ 165.046] 10: /usr/bin/X (0x400000+0x22e6d) [0x422e6d]
[ 165.046] Segmentation fault at address 0xa0
[ 165.046]
Fatal server error:
[ 165.046] Caught signal 11 (Segmentation fault). Server aborting
[ 165.046]
[ 165.046]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 165.046] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 165.046]
[ 172.048] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
Xorg.0.log.old , acpi not off
[ 19.540]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 19.550] X Protocol Version 11, Revision 0
[ 19.550] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 19.550] Current Operating System: Linux p1ohost 2.6.38-ARCH #1 SMP PREEMPT Mon Jun 6 22:49:29 CEST 2011 x86_64
[ 19.550] Kernel command line: root=/dev/disk/by-label/Root ro
[ 19.550] Build Date: 30 May 2011 08:18:15AM
[ 19.550]
[ 19.550] Current version of pixman: 0.22.0
[ 19.550] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19.550] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.550] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 10 08:04:51 2011
[ 19.604] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.604] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 19.614] (==) ServerLayout "aticonfig Layout"
[ 19.614] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 19.614] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 19.614] (**) | |-->Device "aticonfig-Device[0]-0"
[ 19.614] (==) Automatically adding devices
[ 19.614] (==) Automatically enabling devices
[ 19.662] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 19.662] Entry deleted from font path.
[ 19.710] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 19.710] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.710] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.710] (II) Loader magic: 0x7d3440
[ 19.710] (II) Module ABI versions:
[ 19.710] X.Org ANSI C Emulation: 0.4
[ 19.710] X.Org Video Driver: 10.0
[ 19.710] X.Org XInput driver : 12.2
[ 19.710] X.Org Server Extension : 5.0
[ 19.711] (--) PCI:*(0:1:5:0) 1002:9715:1043:843e rev 0, Mem @ 0xd0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000d000/256
[ 19.711] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 19.711] (II) "extmod" will be loaded by default.
[ 19.711] (II) "dbe" will be loaded by default.
[ 19.711] (II) "glx" will be loaded by default.
[ 19.711] (II) "record" will be loaded by default.
[ 19.711] (II) "dri" will be loaded by default.
[ 19.711] (II) "dri2" will be loaded by default.
[ 19.711] (II) LoadModule: "extmod"
[ 19.761] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19.770] (II) Module extmod: vendor="X.Org Foundation"
[ 19.770] compiled for 1.10.2, module version = 1.0.0
[ 19.770] Module class: X.Org Server Extension
[ 19.770] ABI class: X.Org Server Extension, version 5.0
[ 19.770] (II) Loading extension MIT-SCREEN-SAVER
[ 19.770] (II) Loading extension XFree86-VidModeExtension
[ 19.770] (II) Loading extension XFree86-DGA
[ 19.770] (II) Loading extension DPMS
[ 19.770] (II) Loading extension XVideo
[ 19.770] (II) Loading extension XVideo-MotionCompensation
[ 19.770] (II) Loading extension X-Resource
[ 19.770] (II) LoadModule: "dbe"
[ 19.770] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19.770] (II) Module dbe: vendor="X.Org Foundation"
[ 19.770] compiled for 1.10.2, module version = 1.0.0
[ 19.770] Module class: X.Org Server Extension
[ 19.770] ABI class: X.Org Server Extension, version 5.0
[ 19.770] (II) Loading extension DOUBLE-BUFFER
[ 19.770] (II) LoadModule: "glx"
[ 19.770] (II) Loading /usr/lib/xorg/modules/extensions/fglrx/libglx.so
[ 19.790] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 19.790] compiled for 6.9.0, module version = 1.0.0
[ 19.790] (II) Loading extension GLX
[ 19.790] (II) LoadModule: "record"
[ 19.790] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19.791] (II) Module record: vendor="X.Org Foundation"
[ 19.791] compiled for 1.10.2, module version = 1.13.0
[ 19.791] Module class: X.Org Server Extension
[ 19.791] ABI class: X.Org Server Extension, version 5.0
[ 19.791] (II) Loading extension RECORD
[ 19.791] (II) LoadModule: "dri"
[ 19.791] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19.810] (II) Module dri: vendor="X.Org Foundation"
[ 19.810] compiled for 1.10.2, module version = 1.0.0
[ 19.810] ABI class: X.Org Server Extension, version 5.0
[ 19.810] (II) Loading extension XFree86-DRI
[ 19.810] (II) LoadModule: "dri2"
[ 19.810] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19.811] (II) Module dri2: vendor="X.Org Foundation"
[ 19.811] compiled for 1.10.2, module version = 1.2.0
[ 19.811] ABI class: X.Org Server Extension, version 5.0
[ 19.811] (II) Loading extension DRI2
[ 19.811] (II) LoadModule: "fglrx"
[ 19.811] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 19.963] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 19.968] compiled for 1.4.99.906, module version = 8.84.5
[ 19.968] Module class: X.Org Video Driver
[ 19.969] (II) Loading sub module "fglrxdrm"
[ 19.969] (II) LoadModule: "fglrxdrm"
[ 19.969] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 19.983] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 19.983] compiled for 1.4.99.906, module version = 8.84.5
[ 19.983] (II) ATI Proprietary Linux Driver Version Identifier:8.84.5
[ 19.983] (II) ATI Proprietary Linux Driver Release Identifier: 8.841
[ 19.983] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2011 21:43:54
[ 19.983] (++) using VT number 7
[ 19.984] (WW) Falling back to old probe method for fglrx
[ 20.028] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 20.036] (--) Chipset Supported AMD Graphics Processor (0x9715) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 20.037] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
[ 20.037] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 20.037] (II) AMD Video driver is signed
[ 20.038] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 20.038] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.038] (II) fglrx(0): pEnt->device->identifier=0x1539c40
[ 20.038] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 20.038] (II) Loading sub module "vgahw"
[ 20.038] (II) LoadModule: "vgahw"
[ 20.038] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 20.044] (II) Module vgahw: vendor="X.Org Foundation"
[ 20.044] compiled for 1.10.2, module version = 0.1.0
[ 20.044] ABI class: X.Org Video Driver, version 10.0
[ 20.044] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 20.044] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 20.044] (==) fglrx(0): Default visual is TrueColor
[ 20.044] (**) fglrx(0): Option "DPMS" "true"
[ 20.044] (==) fglrx(0): RGB weight 888
[ 20.044] (II) fglrx(0): Using 8 bits per RGB
[ 20.044] (==) fglrx(0): Buffer Tiling is ON
[ 20.045] (II) Loading sub module "fglrxdrm"
[ 20.045] (II) LoadModule: "fglrxdrm"
[ 20.045] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 20.045] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 20.045] compiled for 1.4.99.906, module version = 8.84.5
[ 20.046] ukiDynamicMajor: found major device number 252
[ 20.046] ukiDynamicMajor: found major device number 252
[ 20.046] ukiOpenByBusid: Searching for BusID PCI:1:5:0
[ 20.046] ukiOpenDevice: node name is /dev/ati/card0

I have the exact same problem, new Arch system working for 8 days, now X wont start.
I've booted to init 3, and if I manually type startx all I get is a black screen with a single underscore, keyboard does
not respond, neither does ctrl-alt_F1. I cant kill X server with ctrl-alt-backspace so have to reboot.
In my case Xorg.log is empty but posting from another linux system I have found this in /var/log/messages
--snip--
Jun 10 09:08:32 localhost kernel: [ 14.107767] Pid: 1365, comm: X Tainted: P 2.6.38-ARCH #1 Gigabyte Technology Co., Ltd. P55A-UD3/P55A-UD3
Jun 10 09:08:32 localhost kernel: [ 14.107771] EIP: 0060:[<f96b71fa>] EFLAGS: 00013293 CPU: 0
Jun 10 09:08:32 localhost kernel: [ 14.107786] EIP is at firegl_stub_open+0x9a/0x2b0 [fglrx]
Jun 10 09:08:32 localhost kernel: [ 14.107787] EAX: f360f620 EBX: ffffffed ECX: 0000000f EDX: f97e7e60
Jun 10 09:08:32 localhost kernel: [ 14.107788] ESI: 00000000 EDI: f98c0b00 EBP: f3677e0c ESP: f3677dd0
Jun 10 09:08:32 localhost kernel: [ 14.107790] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Jun 10 09:08:32 localhost kernel: [ 14.107793] 0000000f 00000000 f97c084a 000002c3 00000000 f97cb9fa 000000fc f24be368
Jun 10 09:08:32 localhost kernel: [ 14.107797] f97e7e60 f2c51540 c11155d0 00000000 00000000 00000000 f31da1c0 f3677e38
Jun 10 09:08:32 localhost kernel: [ 14.107800] c1115f8b f2c51548 f2c51540 f3677e38 f24be368 f98c0b00 00000000 f2c51540
Jun 10 09:08:32 localhost kernel: [ 14.107808] [<c11155d0>] ? exact_match+0x0/0x10
Jun 10 09:08:32 localhost kernel: [ 14.107810] [<c1115f8b>] chrdev_open+0x15b/0x250
Jun 10 09:08:32 localhost kernel: [ 14.107813] [<c111056b>] __dentry_open+0xeb/0x300
Jun 10 09:08:32 localhost kernel: [ 14.107815] [<c111195e>] nameidata_to_filp+0x6e/0x80
Jun 10 09:08:32 localhost kernel: [ 14.107817] [<c1115e30>] ? chrdev_open+0x0/0x250
Jun 10 09:08:32 localhost kernel: [ 14.107819] [<c111ef4f>] finish_open+0xaf/0x1a0
Jun 10 09:08:32 localhost kernel: [ 14.107821] [<c111dd08>] ? do_path_lookup+0x58/0xe0
Jun 10 09:08:32 localhost kernel: [ 14.107823] [<c111f550>] do_filp_open+0x1e0/0x6a0
Jun 10 09:08:32 localhost kernel: [ 14.107826] [<c1129904>] ? setattr_copy+0x74/0x120
Jun 10 09:08:32 localhost kernel: [ 14.107829] [<c10ddef8>] ? shmem_notify_change+0x68/0x150
Jun 10 09:08:32 localhost kernel: [ 14.107832] [<c112c338>] ? mntput+0x18/0x30
Jun 10 09:08:32 localhost kernel: [ 14.107834] [<c11119ca>] do_sys_open+0x5a/0x100
Jun 10 09:08:32 localhost kernel: [ 14.107836] [<c112c338>] ? mntput+0x18/0x30
Jun 10 09:08:32 localhost kernel: [ 14.107838] [<c1111a9e>] sys_open+0x2e/0x40
Jun 10 09:08:32 localhost kernel: [ 14.107841] [<c100389f>] sysenter_do_call+0x12/0x28
Jun 10 09:08:32 localhost kernel: [ 14.107877] ---[ end trace 064c0ec360503309 ]---
Jun 10 09:08:32 localhost kernel: [ 14.107878] note: X[1365] exited with preempt_count 1
--snip--
Not sure what this means, but last line states graphics system exited.
I am using ATI HD5770 with proprietary catalyst driver which I have tried reinstalling and
running
aticonfig --initial
This has not fixed the problem.
In addition I boot with grub legacy and watch kernel messages scroll. I used to get
four "Arch" symbols, now I see four "penguins representing each core.
Other hardware
Intel i5 750
ATI HD5770
Gigabyte GA-P55A-UD3
4G DDR3
Prior to this blackscreen Arch was running smoothly and although I have started at
console and tried pacman -Syu I cannot resolve this problem.
I will try open source ATI drivers next, see if this helps.
( To mods I hope I have not hijacked piotroxp' s post if so please move this post).

Ati and xorg

I have some warnings, how correct it?
Use Open-Source driver
WW:
[zy@ysq ~]$ egrep WW\|EE /var/log/Xorg.0.log
Current Operating System: Linux ysq 2.6.23-ARCH #1 SMP PREEMPT Mon Nov 26 21:15:02 UTC 2007 i686
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Loading extension MIT-SCREEN-SAVER
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) RADEON(0): No crtc mode list for crtc 1,continuing with desired mode
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xf87ff800
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
xorg.conf
# xorg.conf by zy
Section "ServerFlags"
Option "DefaultServerLayout" "Monitor"
EndSection
# Files, Modules, and Input
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "dri"
Load "drm"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us,ru(winkeys)"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "Auto"
Option "ZAxisMapping" "4 5"
Option "emulate3Buttons" "no"
EndSection
# Monitor section
Section "Monitor"
Identifier "LG T710PH"
ModelName "LG T710PH"
Option "DPMS"
HorizSync 30-80
VertRefresh 50-80
DisplaySize 336 269
EndSection
# Graphics device section
Section "Device"
Identifier "ATI Radeon"
Driver "radeon"
Option "AGPMode" "8"
Option "XAANoOffscreenPixmaps" "true"
Option "AccelMethod" "EXA"
Option "EnablePageFlip" "on"
EndSection
# Screen sections
Section "Screen"
Identifier "ATI Screen"
Device "ATI Radeon"
Monitor "LG T710PH"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
Section "ServerLayout"
Identifier "Monitor"
Screen 0 "ATI Screen" 0 0
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "dri"
Mode 0666
EndSection
Last edited by zy (2007-12-12 14:42:01)

I don't think the warnings do you any harm. It could be that you did hit freedesktop bug 6689 or freedesktop bug 6624. For bug 6689 there is a mesa patch in the bug report (not sure if it is not yet included in the repo version of mesa).
Though I wouldn't mind that much because the only thing the patch does is not show the warnings.

ATI and TVout plus games problems

Hi,
So I really hate ATI by now but since switching to nvidia ain't and option atm I might as well ask for user input on couple of problems:
1st: Tvout, I guess to get working tvout i must use fglrx? Tvout works as clone atm but is it possible to get same extended desktop and videos playing in fullscreen tv-overlay as in windows? or atleast how to change the clone-tv-out resolution? any working configs would be appreciated.
2nd: While fglrx seems to have better fps than opensource ones, why the hell do games (nexuiz, true-combat, flightgear for one) go from 60+ fps to a crawl as soon as some otherplayer/cpu moves at screen?
Atleast tremulous works just fine.
Using amd3000 and radeon9600pro with ck kernel and usually resolution off 1680x1050 (although lowering res. doesn't seem to help at all)
Anyone else experiencing these?
PS. I could just switch to opensource ati drivers and get compiz and play in windows but then I'd still loose tvout rite? (big minus and ATI really sucks)

Mikko777 wrote:
1st: Tvout, I guess to get working tvout i must use fglrx? Tvout works as clone atm but is it possible to get same extended desktop and videos playing in fullscreen tv-overlay as in windows? or atleast how to change the clone-tv-out resolution? any working configs would be appreciated.
2nd: While fglrx seems to have better fps than opensource ones, why the hell do games (nexuiz, true-combat, flightgear for one) go from 60+ fps to a crawl as soon as some otherplayer/cpu moves at screen?
Atleast tremulous works just fine.
Well nevermind my ranting, The more i use linux the more angry i get that things ain't up to windows level
Answering myself:
1st: for tvout must use fglrx or opensource drivers with crappy apps like atitvout or gatos. so basically its fglrx only and even that ain't too shabby.
2nd: No idea, just a crappy driver I think.
3rd: No compiz without xgl and xgl just plain sux (xfreezes, kernel panicks with opengl apps, not possible to spawn another x screen?)
So in short buy nvidia / intel.

How to get ati and madwifi to work with custom kernel??

Hi. I just built emission-sources from aur package. How do I get ati-fglrx and madwifi to build against this custom kernel using pacman?
any ideas?

Cerebral wrote:Grab the PKGBUILD files for ati-fglrx or madwifi from abs (or cvs), change the name (to, say, ati-fglrx-emission and madwifi-emission) and change the kernel version variable (_kernver I think) to the output of uname -r when you're running the emission kernel. Then run makepkg, and you've got a shiny new package.
damn. thats sweet and easy.
thanks.

Can the ATI and NVIDIA coexist?

Hi everyone,
I recently installed a new ATI Radeon 5770 into my 1st gen MacPro 2006. I moved the original Nvidia GeForce 7300GT into slot #3.
I installed Snow Leopard 6.0 into a new upgraded HDD to tests out the new OS X. My other HDDs are still running Tiger and Leopard.
The problem now is that when I plug my monitor into the DVI of the ATI card, I get a black monitor. When I plug the Monitor cord into the Nvidia's DVI output, I get my normal screen.
How can I get my new ATI working?
I planned on using my old Nividia card for my 2nd monitor since the ATI is not equipped with dual DVI outputs.
What am I missing?
Rio

Hi Grant,
I did notice the possibility of using adapters for the card to support multiple monitors but I don't want to spend more money byuing them. The ATI card already cost a small fortune. I also somewhat failed to notice that the ATI 5770 only supports 10.6.x and up. I have other HDDs running on Tiger and Leopard for testing and software issues. I think I will most likely return this card and opt to find an Nvidia GeForce 8800GT wich may solve all my "issues". We'll what happens.
Regardless, thanks for "chiming" in.
Rio

ATI and NVidia Card in MacPro - Setting primary GPU

Hi
I have a ATI 5870 (offiical, from apple store) in slot 1 and a NVidia GT120 (came with purchase) in slot 2, I want the computer to do the processing with the faster, bigger, better, I-paid-lot-of-money-for-this 5870, but things like Cinema 4D seem to want to use the GT120. I'm no expert on the technical side of thing, I just look at the cinebench and OpenGL info which all say GT120...
Any tips on how to mane the 5870 the "main GPU" card, I commonly use more than 3 displays in the area of work I'm in so would prefer not to have to keep putting in / taking out the card.
OS X 10.6.8
Mac Pro 4.1
8 Core 2.26gHz
ATI 5870 - Slot 1
NVidia GT120 - Slot 2
Thanks,
Ryan

Thanks,
By defualt my main 2 screen run into the 5870, but when I view the OpenGL info in C4D it shows that the GT120 is doing the GPU work, and there is no sign of the 5870, but when the GT120 is removes it uses the 5870...

ATI and multiple cards (Radeon 4850)

I'm looking to set up a triple/quad monitor configuration using my 2 ATI radeon 4850s and arch (64 bit) I was pleasantly suprised that simply installing the xf86-video-ati driver was sufficient to get 2 of my 4 monitors working with apparently-acceptable 2d and 3d support right out of the box! Is there any hope, however, of getting my other two monitors working in a similar fashion, or am I stuck with my 2-monitor configuration? I had a 4 monitor setup under OpenSUSE and the ATI catalyst proprietary driver, but I'm beginning to believe it a lost cause under arch. Any thoughts or experiences to the contrary?

the open source driver should be working for you, you have probably to create a xorg.conf and specify the "BusID" option in your "device" section. Check this site for an exapmple.
good luck,
matse

ATI and Nvidia cards together?

Is it possible to run an Nvidia card with an ATI card simultaneously? I have a 2007 mac pro with the stock 7300gt. I need another graphics card for a third monitor and would like to purchase the new ATI 3870. Does anyone here have an Nvidia and ATI card running together? Are there any issues? Thanks.

Hi Ashuta,
With respect, I think you confused it. I replied to dualrecto's question. As I didn't want to assume what he meant, I took the opportunity to answer to it in relation to both OS X and Windows. His question concerned the 7300 and the 3870, not the latter and 8800.
I haven't seen any info that the 8800 and the 3870 could run together in OS X. However, as was written in the Macnn post that I linked to in the second of the two Apple Discussions links you included, the "no-mixing of video card rule" apparently doesn't apply to the newer Mac Pros. Since the ATi 2600 and the nVidia 7300 work simultaneously under OS X perhaps the 8800 and the 3870 will also work under OS X (and saying that, perhaps it will be possible to run also the combo dualrecto is seeking).
Whether you should switch to the 3870: I guess it depends on what you want to use the cards for. The 8800 is superior in 3D rendering provided the application can take advantage of it's OpenGL functions. Which is why it does well as a gaming card. If not, it seems the 3870 is a better bet: http://www.xlr8yourmac.com/Graphics/ATI3870_Mac_PC_review/radeonhd3870review.html.
Good luck!
/p

9600Pro ATI and KT6

Similar Messages

Maybe you are looking for