-9672 - do you know this error?

Hey I just got a new Airport Extreme Base Station and everything except the printer is working well. I use an HP c3100 all-in-one printer and whenever I try to add the printer I get an error message that just says, "An error occurred while trying to add printer -9672" Does anyone know what 9672 means? Thanks.

I was setting up two laptops (a PowerBook G4 and an iBook G4) to print with an HP PSC 1400 series printer, and on one of the laptops (the PowerBook), I was able to add it through the printer utility just fine, and with the other laptop (the iBook, which had a more recent driver even), it gave me the 9672 error.
Since I couldn't figure out where the printer drivers were stored on the PowerBook to try and see if using the older driver would fix the problem, I discovered something in this thread:
http://discussions.apple.com/thread.jspa?threadID=1157470
...which pointed at the following page, which gives a step-by-step process for setting it up (but for a different model than mine):
http://tech.ifelix.net/1300.html
I did everything they said on this page, but my printer was not in the resulting list (on the last instruction, where it says "Select the relevant HPIJS or Gimp-Print Printer Model."). The problem was that I didn't have the relevant HPIJS files installed.
I had to go to:
http://www.linux-foundation.org/en/OpenPrinting/MacOSX/hpijs
and download the file linked to on that page named:
hpijs-2.7.10.dmg
This is the file for OS X 10.5.x, 10.4.x and 10.3.x. If you're using 10.2.x, select the file below this one.
This file requires "Foomatic-RIP" and "ESP Ghostscript" packages before it will install, but you can download both of those from the very same page, right below the HPIJS links.
Once I installed those three things, I went through the process on:
http://tech.ifelix.net/1300.html
...and it worked like a charm! The only problem is that with this driver, the only quality level I seem to be able to print with is high, so it takes a long time and uses plenty of toner.
I hope this helps!
Message was edited by: iamcrispydammit

Similar Messages

Do you know this error message in iphoto?

I created an album yesterday in iphoto. I then made a slideshow, which i put music from my itunes to. Everything worked fine until today, after I added more photos to it (supplied by a friend on CD).... Now I keep getting a pop up error message regarding various jpegs:
The volume for “IMG_0169.JPG” cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.
Can't seem to get rid of this pop up and i don't know what it means... and i want to be able to burn the slideshow to a DVD-R for a presentation tomorrow... Please help! Thanks!

Hi there. I did the Import to Library, but still am getting error message with some of the images... So I give up on using those particular images. Part of the problem, I think, is that some of them (but not all) were on a Read-Only CD.... the images that I dragged and dropped show up in my iphoto, but can't be used....
Moving on to the next step, I have created my iphoto slideshow, with music, and now I need to be able to copy to DVD-R for others.... can I burn the disc right out of the iphoto program, or do I have to transport to iDVD (which someone else told me to do)?
THanks for your help on all of this! I really appreciate it. I am in over my head on this!

Do anyone know this error?

do anyone know this error?it start sometimes when Im manteining or creating a measure, dimension...
thank you for your time!
aitzi
Fallo de la acción BUILDDATABASE en el objeto GLOBAL.I02_STAR
oracle.AWXML.AWException: Fallo de la acción BUILDDATABASE en el objeto GLOBAL.I02_STAR
at oracle.AWAction.BuildDatabase.Execute(BuildDatabase.java:737)
at oracle.olap.awm.wizard.awbuild.BuildWizardHelper$1.construct(BuildWizardHelper.java:184)
at oracle.olap.awm.ui.SwingWorker$2.run(SwingWorker.java:109)
at java.lang.Thread.run(Unknown Source)
Caused by: oracle.AWXML.AWException: ***Error Occured in BUILD_DRIVER: In __XML_SEQUENTIAL_LOADER: In __XML_UNIT_LOADER: In __XML_LOAD_MEAS_RC_LPRT_ITEM: In __XML_SET_LOAD_STATUS: In ___XML_LOAD_TEMPPRG: (AW$XML) AW$XML
at oracle.AWAction.BuildDatabase.Execute(BuildDatabase.java:731)
... 3 more

JJohnsenDK wrote:
if you want to make private do it in the start of your class...Well...think about that a bit before doing it.
As a local variable, it has even tighter access restrictions (basically) than a private field. It's ONLY accessible within the method. If you make the local variable into a private field, you're actually loosening control over your data.
Now, if that variable expresses the state of your object -- if it expresses data that meaningfully differentiates that object from other objects -- then it might make a lot of sense to turn it into a private field. But don't turn it into a field just if you want to make things private. It's more than private now.

Did you know this was up on FB?

Did you know this was up on FB? https://www.facebook.com/events/1590846764481403/1593647247534688

You are absolutely right, it is good business practice to check out the offerings from a company before you show or give it to your customers.
I guess I just assumed that there would be a cut-out on the front cover of the Aperture books, since the soft cover books I ordered from iPhoto did have the front cover cut-out.
My question, however, is where in the description of the Aperture hard cover book does it state that the cover photo is pasted on ? It is difficult to tell how the front cover is constructed from the photos on the Aperture web site.
...... I may have missed it.
A lesson learned!
Thanks for your comments.

Drawing attention to an FP object DId YOU know this?

Often when we are walking a user through filling out some required information we want to direct their attention to a particular control. The traditional wasy of oing this is to use "key focus" and if more "help" is required maybe change a string control with instruction saying "please fill in your name!". If you really want to get fancy you may even change the background color.
There is now a new approach available but I am not going to tell you what it is (yet). Instead I'll show you!
Run the attached VI (in LV 8.6) and press the highlight button.
The approach I used is in the code but I hid it so you can first ask yourself "how would I have done that?"
So did YOU know this?
Ben
PS To find the answer in the code, please rember that I don't use sequence structes unless I have a reason.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Solved!
Go to Solution.
Attachments:
Highlight.vi ‏9 KB

sth wrote:
From reading between Darren's lines, the method existed previously and thus if Ben saves a copy for previous versions it will work and the method can be cut and pasted to VIs and used in other versions. Ben, can you save a version 8.5 of this and see if it works and then post it? It would be a nice tool and some of us are stuck at 8.5 until further notice.
Oww you are sharp Scott!
Here it is saved as a invoke node. I did not test it since my 8.5 and 8.6 machines are unique boots of the same machine. If it works we may be able to go bak fartehr than 8.5.
Let me know if it works!
Ben
Message Edited by Ben on 01-29-2009 07:56 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Highlight.vi ‏6 KB

How do you fix this error? Can't access photos Your photo library is either in use by another application or has become unreadable

How do you fix this error? Can't access photos----" Your photo library is either in use by another application or has become unreadable"

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create and use a new library then your current library is damaged.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Using the Sony CX550VE to import 1080p-Files the right channel it louder then the left channel. Using iMovie everything is fine. Do you know this problem?

FinalCutProx 10.03 (test version): Using the Sony CX550VE to import 1080p-Files the right channel is louder then the left channel. Using iMovie everything is fine, both channels are leveled correctly. Do you know this problem?

Thanks Tom, that did the trick. Appreciate your help and love your DVD and style. Cheers.

Do you know this messages ?

Hi...everyone !
I finded this messages in my devies log file.
but, I don't know what is mean it.
*Mar 2 06:10:32 UTC: %RCMD-4-RSHPORTATTEMPT: Attempted to connect to RSHELL from x.x.x.x
do you know this messages ?
I wait your answer.
thank you.

That message means that someone is attempting to make an rshell (remote shell) connection to your device.
Someone is possibly trying to exploit an rshell vulnerability but I'm pretty sure that the message means that the router is not configured as a rsh server. So you should not have anything to worry about...
Hope that helps - pls rate the post if it does.
Paresh

Do you know this?

Do you know this http://www.alrit.net
search to find macbook

If you scroll down on that page, to the black boxes with the pictures of the MBP, you will see that the seller states the MBP sustained "minor water damage" and won't turn on. It then said that he sent it to apple when he realized it wouldn't turn on, and they told him it was because of the liquids. If you want to deal with getting it fixed, its up to you, but I figure the trouble you would go through trying to get it fixed might be more than you want to deal with. Its up to you though, but I wasn't sure if you had seen that yet.

Anyone knows this error ? getpwuid("305") failed ?

Anyone knows what this error message means in Console messages ?
This is a copy/paste of the same messages that appears continuously:
09-09-08 2:40:11 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[490]) getpwuid("305") failed
09-09-08 2:40:11 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[490]) Exited with exit code: 1
09-09-08 2:40:11 AM com.apple.launchd[1] (com.apple.launchd.peruser.305) Throttling respawn: Will start in 10 seconds
09-09-08 2:40:21 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[493]) getpwuid("305") failed
09-09-08 2:40:21 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[493]) Exited with exit code: 1
09-09-08 2:40:21 AM com.apple.launchd[1] (com.apple.launchd.peruser.305) Throttling respawn: Will start in 10 seconds
09-09-08 2:40:31 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[496]) getpwuid("305") failed
09-09-08 2:40:31 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[496]) Exited with exit code: 1
09-09-08 2:40:31 AM com.apple.launchd[1] (com.apple.launchd.peruser.305) Throttling respawn: Will start in 10 seconds
09-09-08 2:40:41 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[499]) getpwuid("305") failed
09-09-08 2:40:41 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[499]) Exited with exit code: 1
09-09-08 2:40:41 AM com.apple.launchd[1] (com.apple.launchd.peruser.305) Throttling respawn: Will start in 10 seconds
09-09-08 2:40:51 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[502]) getpwuid("305") failed
09-09-08 2:40:51 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[502]) Exited with exit code: 1
09-09-08 2:40:51 AM com.apple.launchd[1] (com.apple.launchd.peruser.305) Throttling respawn: Will start in 10 seconds
09-09-08 2:41:01 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[503]) getpwuid("305") failed
09-09-08 2:41:01 AM com.apple.launchd[1] (com.apple.launchd.peruser.305[503]) Exited with exit code: 1

HI,
If you have any peripherals connected to the MacBook, disconnect and reboot. See if Console still reports those messages.
Boot from your install disk and run Disk Utility.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
Carolyn

Did you know this about bridge?

I'm just curious if I'm the only one who is this slow... :p
But did you know you could use Bridge to search your computer for images by dimensions? Man, I spent sooo much time this morning trying to find a way to 'trick' Windows into giving me a search by dimensions option. :D
Afterwards, I wasted even
more time googling for utilities or tools with that feature. :\ Then it hit me: I remembered seeing all kinds of neat bits of image information in Bridge last time I used it.
And there it was, in the "find" menu... lol

You are absolutely right, it is good business practice to check out the offerings from a company before you show or give it to your customers.
I guess I just assumed that there would be a cut-out on the front cover of the Aperture books, since the soft cover books I ordered from iPhoto did have the front cover cut-out.
My question, however, is where in the description of the Aperture hard cover book does it state that the cover photo is pasted on ? It is difficult to tell how the front cover is constructed from the photos on the Aperture web site.
...... I may have missed it.
A lesson learned!
Thanks for your comments.

Does anyone know this error? (Attempt to unguard stack red zone failed)

Java SDK: 1.4.1_01
Linux Kernel: 2.4.9-31
Memory: 2GB
I received this error after increasing my thread (POSIX and pthread) limits in the glibc library (local_lim.h) and ran a thread program (shown below) to test the thread limit. Will someone explain exactly what this error is and if there is a way to fix it?
TIA.
Here is the error:
Java HotSpot(TM) Client VM warning: Attempt to unguard stack red zone failed.
An irrecoverable stack overflow has occurred.
Exception in thread "main" Java HotSpot(TM) Client VM warning: Attempt to unguard stack red zone failed.
An irrecoverable stack overflow has occurred.
Here is the program:
import java.util.Timer;
import java.util.TimerTask;
public class Reminder {
Timer timer;
static int cnt;
static int index;
public Reminder(int seconds) {
timer = new Timer();
timer.schedule(new RemindTask(), seconds*1000);
class RemindTask extends TimerTask {
public void run() {
System.out.println("Time's up!");
timer.cancel(); //Terminate the timer thread
public static void main(String args[]) {
System.out.println("About to schedule task.");
cnt = 0;
while (true) {
new Reminder(90);
System.out.println("Thread #" + ++cnt + " scheduled.");

There might be some inherent limits which you can not simply avoid just by hacking the headers. It was recently posted to another topic:
http://www.ussg.iu.edu/hypermail/linux/kernel/0203.3/0175.html
Bill Davidsen wrote:
There is another limit creeping in: pthread mmap()s 2 MB of stack for each thread. So you run out of address space on 32 bit systems with threads > 1024 (and smaller)

Error explaining ???? Don't know this error?mythtv/open-sasc/HVR4000

Hey guys!
I got some Hauppauge HVR4000 in my mythtv - setup !
Using these settings:
Kernel 2.6.31
MythTV 0.22
Drivers to HVR4000: s2-liplianin-hg
Firmware: FW version 1.23.86.1
OpenSasc-ng from AUR(build with this kernel) - but allso build without the solutipn for opensasc??? --Could this be the problem
But getting these errors:
Messages:
Jan 1 22:21:59 MainCore kernel: cx24116_load_firmware: FW version 1.23.86.1
Jan 1 22:21:59 MainCore kernel: cx24116_firmware_ondemand: Firmware upload complete
Jan 1 22:40:22 MainCore kernel: cx8802_start_dma() Failed. Unsupported value in .mpeg (0x00000001)
Jan 1 22:41:43 MainCore kernel: dvblb_fake_ioctl interrupted: 2150133582
Jan 1 22:41:44 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:45 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:47 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:48 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:49 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:50 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:52 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:53 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:54 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:55 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
Jan 1 22:41:57 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774277
Jan 1 22:41:58 MainCore kernel: dvblb_fake_ioctl interrupted: 2147643207
Jan 1 22:41:59 MainCore kernel: dvblb_fake_ioctl interrupted: 2147643208
Jan 1 22:42:00 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774278
Jan 1 22:42:01 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774281
Jan 1 22:42:02 MainCore kernel: dvblb_fake_ioctl interrupted: 2147774277
Jan 1 22:42:03 MainCore kernel: dvblb_fake_ioctl interrupted: 2147643207
Jan 1 22:42:17 MainCore kernel: dvblb_fake_ioctl interrupted: 2150133582
Jan 1 22:42:18 MainCore kernel: dvblb_fake_ioctl interrupted: 28482
(same error in dmesg)
In mythTV Getting this error?
2010-01-01 22:42:01.836 TVRec(4): Changing from Watching WatchingLiveTV to None
2010-01-01 22:42:03.878 Finished recording Robotboy: channel 2402
2010-01-01 22:42:03.992 MainServer, Warning: Unknown socket closing MythSocket(0x7fbf4800b170)
2010-01-01 22:42:04.058 MythSocket(7fbf4800b170:-1): writeStringList: Error, No data written on writeBlock (1 errors)
2010-01-01 22:42:03.995 MainServer::ANN Monitor
2010-01-01 22:42:03.992 MainServer, Warning: Unknown socket closing MythSocket(0x2474e00)
2010-01-01 22:42:04.223 adding: sove as a client (events: 0)
2010-01-01 22:42:04.309 MythSocket(2474e00:-1): writeStringList: Error, socket went unconnected.
We wrote 0 of 9 bytes with 1 errors
2010-01-01 22:42:11.413 MainServer::ANN Monitor
2010-01-01 22:42:11.491 adding: sove as a client (events: 0)
2010-01-01 22:42:16.363 MainServer::ANN Playback
2010-01-01 22:42:16.451 adding: sove as a client (events: 0)
2010-01-01 22:42:16.529 TVRec(4): Changing from None to Watching WatchingLiveTV
2010-01-01 22:42:16.613 TVRec(4): HW Tuner: 4->4
2010-01-01 22:42:16.705 DVBChan(4:/dev/dvb/adapter3/frontend0) Warning: Your frequency setting (11309000) is out of range. (min/max:950000/2150000)
2010-01-01 22:42:22.607 Expiring 10 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:22.705 autoexpire: Expiring Program: Expiring 10 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:22.779 Expiring 0 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:22.863 autoexpire: Expiring Program: Expiring 0 MBytes for 2402 @ fre jan 1 22:40:00 2010 => Robotboy
2010-01-01 22:42:30.277 DiSEqCDevTree, Error: FE_SET_TONE failed
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:31.893 DVBSM(/dev/dvb/adapter3/frontend0), Error: Can not read DVB status
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:32.983 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not measure Signal Strength
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:34.090 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not measure S/N
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:35.183 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not measure Bit Error Rate
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:36.263 DVBSM(/dev/dvb/adapter3/frontend0), Warning: Can not count Uncorrected Blocks
eno: Operationen er ikke tilladt (1)
2010-01-01 22:42:36.379 TVRec(4): Changing from Watching WatchingLiveTV to None
2010-01-01 22:42:38.425 Finished recording Robotboy: channel 2402
2010-01-01 22:42:38.565 MainServer, Warning: Unknown socket closing MythSocket(0x7fbf4800b3f0)
2010-01-01 22:42:38.565 AutoExpire: CalcParams(): Max required Free Space: 1.0 GB w/freq: 15 min
2010-01-01 22:42:38.637 MythSocket(7fbf4800b3f0:-1): writeStringList: Error, No data written on writeBlock (1 errors)
Can some one Please explain what goes wrong here and perhaps the solution

See this for the 0xE error.
http://support.apple.com/kb/TS3221

Anybody knows this error - "FUN_INTER_BSV_NOT_ASSIGNED"

hi
need ur help regarding this error.
thanks
emgee

R12 The Bank Account Transfers for the Same Company Ends Invalid [ID 473212.1]
Solution
1. Go into the responsibility: Cash Management Responsibility
2. Go to Setup / Miscellaneous / Accounting Setup Manager, and select Accounting Setups.
3. Go to the Legal Entities tab.
4. Query up the legal entity
5. Select the Update option on the Legal Entity line.
6. Select the Balancing Segments tab.
7. Set up a balancing segment for the legal entity.
8. Retest the issue.
9. Migrate the solution as appropriate to other environments.

Does anyone know this error?

I run the command "java" and got the following error:
Error occurred during initialization of VM
java/lang/ClassFormatError: Unknown constant tag 103 in class file java/lang/Error

I have installed JRE in my system correctly. Java applications can be run on it. I copied the JRE from the local directory to a removable disk. This error will be produced when I run the JRE from the removable disk. I just wander why this happen.

-9672 - do you know this error?

Similar Messages

Maybe you are looking for