97 Firmware uppdate problems

Hi all,
I have a N97 wich i have uppdated to the latest Eu Firmware uppdate, Now the problem is that i Reinstaled the firmware with same version cause my phone where going slow du to lots of program installnings!
So i úppdated the phone, But my Programs where still there after the firmware uppdate!
So i Hard resteted the phone by pressing *#7370# and it did a hard restet!
Now the problem is that my phone where still crashing a lot after the instaltion, Without installing any additional software it was verey unstable! so i did a new Reinstalation again! But But This time it did not Download the Firmware, it did the instalation directly, (The firmware where downloaded the first time by the nokia software uppdater)
I Thought the Firmware where then downloaded to my pc, so i did the Re instalation in a nother Pc!
But But The Firmware seems to be on the phone ..
So The Nokia Software uppdater Downloads the firmware to the phone, Then it installs it from there. I think there is some thing wrong with my firmware wich it installs it from!
But i cant Get a Clean Instalation
Any Tips How to Do A Factory Instalation ? 100% Clean ! ???
N97
N95 8GB
5800

Thanks for the fast response and answer
Hopefully they fix these bugs, cause its annoying to have a 7500 swedish kr phone doing this
i have now reinstaled it more than 6 times in 1 day ..
Dose the Code *#7370# Formats the C: or Only removes user data ?
i think the best way whould have been if Pc Suite Formats the C: every time (If u like to, an seperat Option) or remain with the Upd.
and by formating it would be a 100% fresh start
Hopefully it would be possible in the future
N97
N95 8GB
5800

Similar Messages

Firmware update problem solved after Win XP SP3 -upd

I'm one of the numerous victims of ZEN firmware updating problem. At the start I had Win XP SP2 and WMP. My player is ZEN Micro 5gb and after trying to update firmware it had firmware problem and stayed in the recovery mode. Firmware updater and ZEN Media Explorer couldn't recognize the player. So that's how I got it work again:
1. Rolled back WMP to WMP9, updated it to WMP0.
2. Removed ZEN Media Explorer and Jukebox driver (all Creative stuff) from Add/Remove programs in Control Panel.
It didn't solve the problem. I also tried my player with couple of other computers, but it didn't help either.
3. Installed Win XP SP3 -update.
4. Reinstalled driver for ZEN Micro in Control Panel.
5. Ran the firmware updater and this time it did recognize the player.
(6. Updated WMP back to version and the player's still working.)
Hope this will help you too.

I can start the upgrading process, but at around 95% it stops, and says "firmware upgrade failed." I didn't uninstall WMP though, because I have Vista, and I hae no idea how to do it. I can only get my computer to recognize my 6G Zen when I go into recovery mode and choose 'reload firmware' then I connect it to the computer and I can start trying to upgrade it. If I dont go into recovery mode, its just a blank screen, the computer doesnt recognize it, and I can't even turn it off without reseting.
?I've tried so much, now when I try to upgrade, it loads a little bit and jumos to the end quckly and says "firmware upgrade fails" and nothing works. Do I have to try to do all the things you listed to fix this?

Xcode and firmware update problem

Hi all,
i've been working on my app for a few month now and i have about two more weeks until i finally submit it. everything went very good during development.. untill -
by ACCIDENT i've upgraded my firmware to 3.1.2
since my OS is 10.5.7, as i understand, i must install xcode 3.2.1. but this version also needs mac OS 10.6
so it's realy frustrating for me...
do i need now to upgrade/purchase OS 10.6 and also my xcode environment in order to continue working ?
can't i make a rollback to other firmware version supported by my current 3.1.2 xcode ?
i've searched the net endlessly and just couldn't find anyway to downgrade my firmware (i have a 5.11.7 baseband and 6.2 bootloader)
please...
any help ?

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Zen 8G This device cannot start code 10 and firmware update problem

I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
Welcome to Creative forums!
Try booting the player in the recovery mode.
. While the ZEN is off, press and hold down the play/pause button.
2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

Can't configure personal cloud after firmware uppdate

I recently bought in ix2-device. I uppdated the firmware to version 4.1.108.32627 with the result that I now can't configure a personal cloud.
When I try, the browser opens the domain https://portal.iomegacloud.com with an error message saying the page can't be displayed.
Something must have gone wrong at the uppdating for the firmware. But what? And how do I fix this?

Hello all,
If you are experiencing problems setting up or using personal cloud, please double check that port forwarding is in place and shown as open if using a port checking utility. (80, 443 for remote web browser access, 50500-50599 for LSM/basic cloud functions) How do I set up my router for Personal Cloud?
At that point please contact LenovoEMC support to create a support incident and troubleshoot for your specific circumstance.
Lenovo Contact Information is region specific. Please click the correct link then access the Contact Us at
the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

After firmware upgrade problem CP1025NW

I am trying to upgrade the firmware on my CP1025NW printer. I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
Exist some kind of special software for an force firmware update ? or how can I restore it ?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are we running the update from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

10.6.8 Macbook Pro firmware update problem

I installed a couple of updates for my MBP 10.6.8. One was Safari, the other was brand new, released within the last week, I think it was a firmware update, and now the machine will not boot into OSX. I have a Bootcamp Windows 7 partition that starts fine. But if I let it boot, or select the Mac partition, it shows the apple logo, then a little progress bar below it that gets to maybe 5-10%, then starts over, then the computer powers down.
I have tried clearing the flash by holding option+command+P+S. Didnt work.
Is there a way I can boot to a command prompt and clear this update out or something? Or anyway to fix this myself? From the Windows partition maybe?

So...fixed my issue and it was not related to the updates, it was just coincidence.
What I finally did was take a video of the startup screen and was able to see that what was happening was fsck was failing, and then the system just halted. This info presumably makes it to dmesg, but not to system.log (huge oversight IMO). So its not easily discerned.
Once I figured that out I googled around and this guy's page helped me fix the problem:
http://blog.jbheren.com/post/2011/02/09/repair-hfs-volume-on-osx
Specifically I had to boot into single user (command+S at the startup sound)
and issue:
fsck_hfs -ypr /dev/rdisk0s2
Then I did
reboot
and here we are

**SPA2102 FIRMWARE UPGRADE PROBLEM WITH 5.2.12

I'm having problems loading firmware 5.2.12 onto my SP2102-R ATA. I have my laptop PC running Windows 7 directly with an ethernet cable from my laptop to the ethernet connection on the back of the SPA2102. I run the .bin file and In order to get the software to the upgrade stage I have to enter ****, 73738 1# to move to the next stage. I have now been waiting for 1/2 hour waiting for firmware download request from SPA. IT DOESN'T GET PASS THIS STAGE.......CAN SOMEONE PLEASE TELL WHAT I'M DOING WRONG OR WHAT I NEED TO DO DIFFERENT?
Thanks......

Based on my experience with the SPA2102-NA, it is not necessary to do a factory reset (*73738) in order to perform a firmware upgrade/downgrade.
However, now that you have done so, any and all previous user settings will have been reset to the original factory settings (including user set passwords - assuming your ATA is an un-locked SPA2102-NA).
If you think the firmware 5.2.12 is faulty, then repeat the upgrade/downgrade process by downgrading back to an earlier version:
http://www.cisco.com/cisco/software/release.html?mdfid=282414111&softwareid=282463187&release=5.2.12&relind=AVAILABLE&rellifecycle=&reltype=latest
If you are still having problems, see if this tutorial will reveal any procedural issues:
http://blog.cqvoip.net/2009/12/linksys-cisco-spa2102-updating-firmware.html
Regards,
Jeff - cqvoip.net

5800 V40 Firmware: Calendar Problem

Yesterday I updated my firmware to version v40
This moring I had a reminder in my Calendar of my nokia 5800, when a reminder is show the screen it is different then before, Only one problem the touchscreen won't react, when i push stop nothing happens, when I push silence nothing happens, the reminders keeps going and the sounds keeps playing, I have to push the button to turn off my phone and then he comes back to the home screen.
Does anyone have the same problem? or a solution to this problem?
Solved!
Go to Solution.

Have u tried taking the battery and sim card out for 5 mins. Or reinstalling the firmware.
If not than try backing up your phone and reformat.
n97.

Firmware & connectivity problem in ZEN MicroPh

I really need some help...i bought yesterday a zen microphoto and i spent a lot of ours to configure it but i failed.Some months ago i had i zen micro so i'm not completely irrelevant with the subject.My Zen micro worked fine.But zen microPhoto does not!My computer recognizes it as a removable dri've but not as Zen player.Windows also recognizes it as a MTP player,but when i choose to organize it with media source,it says to connect my player even if is connected. I've tried to fix it in many ways:install-uninstall the device and the drivers,restart again and again my pc,put in and out the battery but nothing. Then i thought to get it in recovery mode and choose the 'reload firmware' option.(Maybe it was a wrong choice,but i could'n find anything else to do). The firmware was deleted and when i tried to run the new one,the window of the 'Plays for sure firmware update' prompted my to connect the player with my PC(even if it was recognized by windows).Now i have a useless zen device without a firmware.What can i do?Try another PC maybe?
I would appreciate any help... Thanx!
p.s. When i had the Zen micro,i didn't have these kind of problems.When i was connecting it,media source automatically recognized it and prompted my to organised it. I had no prompt from Windows for MTP player etc.

maybe i did the same thing i don't know..... i never ever got my damm microphoto to connect to my computer so a friend let me borrow her laptop, and?i took the advantage of ripping a large part of my cd collection onto my zen... awesome?so i was deleting some of the photos that come with it, when it froze... i took the battery out, and put it back in.... and waited for the library to rebuild.... now the screen says "select music to play from music library"... but there are absolutely no songs or albums, in my zen now wtf? no pictures either.... i go into system information and it says that there's "85MB free space"... so my songs are still in here and not deleted.... and now i keep connecting it to the usb, and the media explorer says "device not connected".... arrgghh i'm getting so frustrated someone help me please what happened? i've just about had it with this piece of junk so many problems with it from day one... i don't know why i didn't return it when i had the chance.....

Upgrading a iMac G3 from OS9.2 to OSX. Firmware upgrade problem.

I am having trouble updating the firmware on my iMac G3 400mhz computer. I am running 9.2 but there seems to be a sleep problem. The computer shuts off, after holding the programmer's button, during start up. So, the 4.1.1 update doesn't take. As well as when trying to start the system up fresh the screen stays black and only when I manually innitiate sleep and start up again does the screen come back on. I am at a loss.

Now, here is what I did from the very beginning.
I replaced the battery, set the power management button, booted up the computer, the computer starts up in sleep mode ( Screen is off and won't come back on till I manually press the power button to put the system to sleep. I then press it again to wake it up, only then will the screen come back on). I then shut down the system to install the firmwarre update. I held down the programmers button, system tones then the computer shuts down before starting up. I then start it up again and the computer tones 2 times as if it were resetting the PRAM. After start up a message sayes that the firmware was not installed.
I am getting rather confused.

Airport Extreme 7.1 Firmware Upgrade - problems with Airdisk

I recently upgraded the Airport Extreme firmware from 7.0 to 7.1 but have experienced several problems.
After the initial upgrade, I encountered a double NAT warning, which was fixed by switching into Bridge mode, followed by an invalid IP address warning. I rebooted the AE and the warning disappeared.
Connecting to the wireless network is ok, except that it can never remember my connection (which is a closed WPA2 Personal network) and I have to manually re-connect every time I switch on the nac - with my previous Airport Express this would remember the network and re-connected automatically.
Worst of all however is that I can no longer see my AirDisk - a LaCie 500 GB USB HD connected to the AE.
The disk name is simply upper case ASCII and so I cannot understand why this is occurring. It worked perfectly using version 7.0. Has anyone else had these problems or aware of a workaround?
MacBook Pro (Core 2 Duo) Mac OS X (10.4.9)

The 7.1 update has caused problems for many many people.
What I did to solve problems was to revert back to 7.0. here's a link to a post I made over at jmacrumors.com explaining how to do it:
http://forums.macrumors.com/showthread.php?p=3690572&posted=1#post3690572

7905G firmware change problem

Hi,
i have a 7905 phone with SIP firmware. I want to use this phone with our call manager as SCCP. I have changed tftp server adress on 7905, but it coulnd't download it's own firmware. it's still working with sip firmware. call manager can access to phone (with ping) there is no problem.
How can i change this firmware to SCCP??

For "Converting an In-Use Phone from SIP to SCCP," instead of following the steps provided in the administration guide, follow the steps below:
1. In Cisco Unified Callmanager Administration, choose Device > Phone.
2. Click on the existing SIP phone that you want to convert to SCCP.
3. In Phone Configuration page, enter the SCCP image name for the phone model in the Phone Load Name field.
Note You can view a list of the default image names for all phone models by choosing Device > Device Settings > Device Defaults in Cisco Unified CallManager Administration.
4. Click Save.
Note A pop-up window will tell you to reset the phone for the changes to apply.
5. Click Reset.
6. In the Device Reset page, click Reset, then click Close.
Note The phone will reboot and upgrade to the SCCP image. When the phone completes the reboot process, the message "Registration Rejected" appears. Do not proceed until this message appears.
7. Click Delete to remove the SIP phone configuration from Cisco Unified CallManager.
8. Perform a factory reset on the phone:
8a. Press the MENU button.
8b. Press **2
8c. When you receive the prompt: "Do you want to reset all system settings to default values?", press the Yes softkey.
Karzazi
Remember to rate all helpful posts

Firmware update problem-- my macbook pro will not start

I think I took my finger off the power button and then put another finger down which turned my macbook pro off when I was installing some kind of firmware update... all I get now is a blank screen but the power button is on and it "feels" like something is going on inside but nothing... can some help? Thanks

I did explain how long to hold down the 'C' key in a previous post. Anyway, you should hold it down until you see the start up screen.
You could have a dirty or even a bad install DVD. If you could try it in another machine that would let you rule that out as a suspect. It's also possible that your DVD drive is damaged or bad. At this point it sounds like a trip to an Apple Store is in order.
Good Luck!! And please post back with your outcome, it might help someone in the same situation.
Edit: Did a little more checking around and found that this may be a common problem as in this other post...
http://discussions.apple.com/thread.jspa?threadID=963645&tstart=330
Could also be related to this...
http://www.retrodata.co.uk/noticeapple_seagatedrives.php
Either way, like I said above it sounds like a service call is in order.
Again, Good Luck!

Nokia E90 firmware battery problem

Hi! I updated last week my E90 to the latest firmware. Until then, my battery lasted for more than 3 days. Now, my battery lasts for only 18-20 hours when I do not make any phone call. I do not have any bluetooth or WI-FI scanner activated. I do not know what is happened. I think it is a firmware problem. Are you going to fix it?

Hi David,
I had the same problem too: after installing the new firmware my battery lasted for max 24 hours, even when in standby and no calls made.
I reinstalled the firmware 48 hours ago after a full charge and the battery still is full now!!
What you need to do, in order to be able to reinstall the firmware, is downloading the latest Nokia Software Updater software. This enables you, after the message from the updater that you already have the latest firmware, to reinstall it. As I noticed already, it worked for me.
regards, kuzibri

97 Firmware uppdate problems

Similar Messages

Maybe you are looking for