9700 Pro / SIS 648 MAX /Games Issues

Hi Everybody!
Everything seem to be find with my PC, but everytime I play a game, I'm sent back to the desktop eventuelly. I have a fresh Install PC with XP SP1, latest driver from ATI (Catalyst version 3.0) directx 9 install, BY the way my mobo is a SIS 648 MAX from MSI with the lastest AGP and IDE Drivers installed (for this motherboard of course) and I have the latest version of the bios. here the description of my Machine.
Intel 2.4 P4 533 northwood
1024 gig of DDR 333
Ati 9700 pro AGP 8X
SB Audigy
120 Gig HD Seagate
With Windows XP SP1 Installed
Any suggestion!??? all my game do this

Try stepping down (underclocking) your RAM tp run @ 266.. There is a huge issue that hasnt been addressed by MSI or ATI at this point. Its a latency issue.
It could be solved by ATI with a new driver that decreases the AGP latency or MSI could update a BIOS that could be flashed that allowed to reduce AGP slot latency manually.
Let me know if it helps you!

Similar Messages

SIS 648 max w/ATI AIW 9800 pro issue

Hey all... I am trying to install a new Ati AIW 9800 pro in to my PC. The Motherboard is a MSI 648 Max-L....... Every time I install the old or new Driver set for the Ati card it kills my network connection I cannot connect to the internet or other PC in my network... I cant even ping my router. I have to restore my PC back to the time before the install and all is fine even with the card still in the PC with no drivers loaded. Hers the kicker I can install just the ati display drivers an all is fine but as soon as I install the Multimedia drivers I lose all network connection and have to do a restore to get it back. Even if I delete the drivers and reboot the PC my network connection is gone, have to do a restore to get it back.
Any ideas on this issue????
MB: MSI 648 Max-L
Ram: 512 Kingston 2700
using Mobo onboard: sound and lan
WD hard drive 80 gig
thanks

Here is a copy of my Conflicts and sharing...... it doesent list the multimedia devices that ATI installed as a IRQ conflict. Tehe Multimedia drivers get installed in the sound/video and game controllers..... the sound still works fine.... Hope this may give you some idea of the problem
Thanks
Conflicts/Sharing
Resource Device
I/O Port 0x00000000-0x00000CF7   PCI bus
I/O Port 0x00000000-0x00000CF7   Direct memory access controller
I/O Port 0x000003C0-0x000003DF   SiS Accelerated Graphics Port
I/O Port 0x000003C0-0x000003DF   ALL-IN-WONDER 9800 SERIES
IRQ 18    Realtek AC'97 Audio
IRQ 18    Broadcom 440x 10/100 Integrated Controller
Memory Address 0xA0000-0xBFFFF   PCI bus
Memory Address 0xA0000-0xBFFFF   SiS Accelerated Graphics Port
Memory Address 0xA0000-0xBFFFF   ALL-IN-WONDER 9800 SERIES
I/O Port 0x000003B0-0x000003BB   SiS Accelerated Graphics Port
I/O Port 0x000003B0-0x000003BB   ALL-IN-WONDER 9800 SERIES

Help for SIS 648 MAX-L Startup Problem

I just bought an MSI-648MAX-L, a 2.4GHz cpu and a Jaton GeForce4 TI4200 card. Installed all of the above + PC2700 512 MB RAM and a WD 80GB hard drive, floppy and CD. Turn on the power and my screen flickers all four of the diagnostic leds light up green and then nothing. I hear the hard drive spinning and the CPU fan and video card fan but nothing else. Tried one other AGP video card and a PCI video card but nothing on the screen. Seems like the BIOS is not loading. So I turn the computer off and set the BIOS reset jumper. Turn it back on again and still nothing. Checked all the connections, the seating of the CPU and tried again, still nothing. Any idea what might be wrong?? I hope I don't have to buy another MotherBoard and also I hate the idea of removing my CPU once installed. ;(
Thanks for your help..
Kumar.

What kind of video card is it?
If it's a radeon 9700 pro, look in one of the other threads on this site to figure out what revision you have, rev 1.1 or 1.2 9700 pros will not work on some 648 max boards ( well for me it was 648 max L im not sure about the 648 max but im assuming it has the same problem.
What happens with radeon is since the mobo sets the agp automatically, and there is the 8x bug the system doesnt boot. But the card will work fine on machines that have 4x, In this case RMA the card to radeon and make sure to specifiy that you get a 1.3 rev.
Otherwise you stated you have tried other processors and memory that were "known" to be good.
DDR 400 or DDR 333 memory?

SiS 648 MAX problem!

Hello!
I have a very annoying problem with my MSI 648 MAX board.
The computer freezes and reboots when i put in another DIMM in it.
I have two identical TwinMos 256mb PC3200 DDR modules.
They both work fine when they arent used together.
When i put in the other one, the sympthoms i described above happen.
I have formatted c: and tryed with both WinXP and Win2000.
I'm using the latest SiS AGP & IDE drivers.
Nothing in the system is overclocked.
I have upgraded with the latest bios.
Other system speccs:
P4 2.0 (400mhz).
ASUS GF4 Ti4200.
80gb Seagate.
350W "Noname" Powersupply.
Is this a known problem and will I just have to face the fact that this won't work? :(

It's a JNC Power Supply 350W.
The amps are:
+3.3V = 24A
+5V = 35A
+12V = 12A
-12V = 0.8A
-5V = 0.5A
It has worked fine with this board before and with another board (Abit th7 II raid).
The problem itself is getting worse, windows freezes with just 1 memory-stick now :(
Formatted once again and tried WinXP and Win2k without any success..
The Memory / GFX works fine in another computer.

Sis 648 max (ms 6585) display problem

whenever im rebooting or reseting, my display does not return. i cannot see the post or anything and i dont think it boots up into windows. i have shut the computer off completely wait for 6 secs and then turn it on. its a hassle when i restart. i flashed the bios 1.1 to 1.4. im using a 9700 Pro on it i heard theres an issue with the card. any solutions? i used live update to flash and the manual bios flash file is confusing, says its missing a file when i try to flash. please help!

o yea of course ive tried that... but its actually just not loading. a more detailed descript, its not only during restart. if the computer is coming on from a cold boot and this is the first time its booting up this happens. i must kill the power supply, wait 10 secs then try it. if i shut it off or restart it does not do post or do anything making me turn off the psu and waiting and starting again.
and another problem, my HD light is not working. the store i bought it from said it was fine but i dont see it... im a little lazy to go even though its a 5 min walk... any suggestions?

SIS 648 MAX Sound

I have a 648 MAX motherboard with onboard sound. I also have an S-Bracket fitted and use this to connect to a TEAC PowerMax 950 Digital 5.1 sound system using digital coax.
I am using the latest version of the AC97 sound driver under windows XP Pro. (5.10.0.5320)
When pressing the test button on the sound system, all 6 speakers are heard and work OK. When I use the AC97 Sound Effect Manager from within control panel, this fails to test anything other than the front left and front right speakers.
Any ideas please?

Do you have any real problems when it comes to gaming, watching DVDs/VCDs or listening to MP3s and CDs?
If you are not encountering problems with the daily usage, then you can don't bother about the 2nd party software for the testings.
I personnally don't use any programs to tests my Altec XA3051 5.1 DDS speakers as long as they work normally with all the correct programs and apps.
You can also try updating your WinXP to SP1.

[SIS Series] SIS 648 Max-L MS-6585 mobo probs. please help.

I have been having tons of issues with this mobo. First off when playing a simple game such as starcraft, it will either restart randomly, or perform an illegal operation. It has massive probs playing any games more complex than that, which is sad. I also had alot of problems with installation of win xp pro. some files failed to copy. Install finally worked but after many tries. some help would be great. thanks.
it had a 2.0ghz 400mhz fsb intel celeron processor but was changed out with a 2.26ghz p4 proc
so heres the specs on this computer
power supply
tigerpro 350 watts
vid card
Abit siluro gf4mx-se
hard drive
80gb western digital wd800
Hitachi 8x dvd rom drive
generic firewire card
s-braket installed
d-braket installed
2.26ghz 533fsb 512k l2 pentium 4 proc w/ stock heatsink+fan
memory
spectek select 512mb which worked in 2 other systems flawlessly
OS
presently a dual boot system with win xp pro and suse linux
oringinally had just winxp pro and had same issues as stated before

see i dont kno. its a 350w psu, and it seems almost as if the ram bank is bad, ie the slot where the ddr mem goes. i change it to a diff bank and it works. starts up fine. but the next restart, will not run. see this is what happens.
1 turn on the computer. it will just sit there with no cmos/post beep and no bios for the mobo or vid card appears on screen. hdd and dvd rom get power as well as the fans
2 the d-bracket 4 leds read all green, signifying that the cpu or heatsink is bad or not installed properly.
sometimes ill release the tension on the heatsink and move it around(the heatsink) then turn it on with the tension loose, and seems to do better like that. plus it will boot. also, another time and pretty much every time since my first post, it seems to start up all the devices, but no boot. I initially thought it was the cpu so i changed that out with another that was known good. then it worked marvelously, but after another restart, refused to start at all. Then after reading the other moderators post i realized it could be the ram. I had the same issue with this board before, before it was RMAed mind you, where it wouldnt work, so i moved the ram to a diff slot and it worked. same case with this new mobo. it started up fine. then same prob arose, but this time, no matter what would not start until i put the new kingston ram in. then i ran that memtest prog. finished, got to 100%, and kept counting, but couldnt stop it or reboot from the menu, so i hit the reset button, prolly not the best idea, but i didnt have a choice. im not quite sure if the ram passed or not, but immediatly after gave me tons of probs. boots runs Suse linux, but wont run windows. As soon as it loads it instantly restarts. this happend even in safe mode. this mobo was originally in the computer i have now, and i think its the same wattage and amperage as the one in the msi mobo case. the reason y i dont see it being the psu is bc im currently runnin a 3.0ghz p4 1 sata 2 eide ok vid card a dvdburner and a cdrw. alot more than this system, but never gave me any probs. but who knows i could be wrong. I appologize for the long post. but i am totally stumped on this one. but it just seems to me like this mobo series (648max-l) is just way buggy. i have had issues with this mobo from day one. as well as the one(exact model) before it. If i have to put anymore money into this mobo, it jsut isnt worth it to me anymore. i will prolly just buy a diff mobo all together. as always any help or suggestions are very much appreciated. once again i appologize for the lengthyness, but i hope this will aid you in your diagnostic. thanks again!

SIS 648 Max RAM speed

How can i set RAM speed? Plz give me step by step exp
I have 512 DDR 400 ram, will it work? I didnt find any 512 ram in tested hardware on this board.
Tom

Hi Tommen,
I can not give no a step by step guide, for that I know to little. Under the "Frequency/Voltage Control" you can set the CPU/DRAM ratio. When you change the ratio you can see the DRAM freq. just below. For DDR400 it should say 200MHz.
In the "Advanced chipset.." you can set CAS latency, timing and command rate. These settings are depending on what kind of RAM you have, and would also effect the RAM speed.
But if you have read this forum a bit you probably have seen that a lot of us using DDR400 in this MB have had problems.
In addition MSI has the program "Fuzzy Logic" but few of us (if any) has been able to use it with success for this MB.
I'm intresting to here how your DDR 400 is working?
My 512 DDR400 was working perfectly except from when rebooting I had to turn off og on the PS. To get it working as it should I had to set it as DDR333 (shown as 167MHz in bios), and set timing to Normal.
Everyone else....please feel free to correct me..

SiS 648 Max and Memory, still having pb

OK, I still can't use 3x512Mo of Corsair DDR 400 Mhz! I've tried all kind of settings in the bios, all kind os speed of ratio, it's always the same, it works perfectly with only one memory chip !
So my question is: what memory should I use to be sure that 2 or 3 chips will be OK ?
What if I use 3 x 512 Mo of SEC K4H560838C-TCB3 PC2700 DDR Ram ? They say it has been tested ... am I guarantee that will work normally ??
Did some of you have 1 Go or 1.5 Go of DDR something with this mother board, without any problem for configuration ??
Please, tell me !!
Thanks

Quote
Originally posted by EricUSA
I've tried all these combination, using only slot 1, or 2 , or 3, putting 2 chips, or 2. No way, it only works with 1 chip.
By the way, I didn't try to change the settings in the bios (speed, voltage, ...) because I'm not really familiar with that, and because I assumed that if it works fine with one, it should work fine with 2 or 3 ...
What kind of bios setting would you guys suggest ??
I've found that with this board, if you change the memory you may have to change the BIOS settings. Try setting the Timings to Normal. After that, try manually setting the CAS# Latency. Try it at 2 and 2.5. At each CAS# setting, also try changing the MA Select setting. The easiest way is to get memtest86 and run it after changing each setting. If you change a setting and it won't post, reset the cmos. If you get it working, then try setting the timings faster.
Edited:BTW I guess I should ask. On your first post, when you say it wont boot. Can you still get into the BIOS?

NEED AN EXPERT MSI 648 Max

Need advice. Present computer specs: P4 2.4GHZ 533 FB, Samsung 2700DDR 512, Radeon 9700 Pro, MSI 648 Max Board . Problem Im having is after booting up puter, after about 3 min. cursor arrow changes into a 1 " square. Then screen goes black and puter freezes up. Ive checked out the processor, video card, in another computer. No problems incountered. Do I have a Bad board???

There is a compatibility issue between 648 Max and Radeon 9X00. There are many threads about this issue in this forum. Have you tried updating your BIOS because it should solve some issues?

MSI 648 Max with AGP X8 - BIOS update

I have replaced my old AGP card with Radeon 9550 256MB for use with my new Dell 20" WS monitor.
Every time, after starting or during 3DMark03, it crashed back to desktop and sometimes retarting my pc. I try ram settings, aperature etc with no luck. My pc has TrueBlue 480 watt PSU and the voltage reading is good.
In the end, I searched this forum and found out it was the problem with AGP X8 so I changed it to AGP X4 via ATI control panel, my pc went through 3Dmark03 with no problems at all. AGP X4 works flawless.
Regarding BIOS - my motherboard is SIS 648 MAX-L HT ready (Hyper-threading) and its latest BIOS version is v3.1. I'm just wondering that is my board exactly the same as non-HT 648 MAX board physically? Since they use same chipset with same layout and also because I noticed the BIOS update for non-HT version is different with v1.5 and has the fix for Radeon 9700 problem which could be related to my problem. Since I'm using Pentium 4 2.53Ghz, Hyper-threading is a useless feature, could I flash my board with this BIOS?
Thanks in advance

Quote from: Stu on 23-September-06, 05:23:39
then leave it at that then. the actual real-life performance difference between 4X and 8X is negligible
Thanks, just asking...I guess I answered my own question!

655max: video CRASH with agp 8x RADEON 9700 pro

Hi I own a 655max mobo and a radeon 9700 pro. I play games direct3d OK with agp 8x, but when I play Quake 3 Arena for about 15 to 30 min my video crash. I changed the agp 8x to 4x and everything works fine, but the framerate slow down seriously.
My system:
P4 2.6 @ 2.8
1024 MB DDR400 samsung Memory
WD 80 GB ATA100 7200 RPM
Ati Radeon 9700 pro
Sound Blaster Audigy 2
Please help !

ok i just tried to do that kaigon and the strangest thing happened, my system will not respond or start up with radeon in now... it will however if i leave the supplemental power plug off of the radeon, it starts, then gives me the error telling em to connect it, then when i connect it and hit power...nothing. pop in my old gf2 and fires right up, i dont understand this at all especially because the first time i turned my system on was with the radeon, with supplemental poower plugged in. i tried everything i could think of in the BIOS to straighten this out, but nothing, any more help would be awesome! thanks.

648 max + 9700 boot issues - help

hi
i have a radeon 9700 (rev 1.3) and the 648 max - L and everything is working fine when i am in windows but sometimes when i cold boot i get no screen and it doesnt sound like i am booting up. i do see some hard drive activity but thats about it. i try reset and sometimes it will work and others not, also when i install a program that needs to reboot sometimes it wont - basicaly the same problem as cold boot.
i have a enermax 430 and so i doubt it is a psu problem, also like i said when i am in xp i have been able to play 3d games and run 3dmark and have yet to have any crashes.
anyone have any solutions or suggestions as to what the problem is and how to fix it?

Ok MSI called me back finally, I explained situation and told him that i have read other people with 0209 boards have had the same issues.
He is cross shipping me a new 648max-L board I asked about it being backordered because of reading this thread and he said it should be shipped today or tomorrow so maybe they got boards in? Or maybe they modified a board that they are going to send me?
He originally wanted me to send mine back and they would send me out a new one but i told him that i have no place to store the processor for that long of a time and i would be without a computer so he took my credit card number and put a hold of 100 dollars on it, once they receive my old one i will be credited.
So all in all, i will be getting a new mobo and rev 1.3 radeon 9700 pro and i should be ready to go.
Here is an email i received from MSI for those of you that are worried about resolving these issues.
Dear Paul,
I've just confirmed this with my collegue and he said that the first shipments need to be reworked. Please send the board over to me directly and I'll take care of it for you. Please include your address and make sure you get a tracking number for the package.
Attention: Peter Hong
MSI Computer
901 Canada Court
City of Industry, CA 91748
Sincerely,
Peter Hong
http://www.msicomputer.com
MSI is your TOP choice for DDR Solutions!
E-mail: [email protected]
1.626.913.0828
1.626.581.7721 Fax

Wierd issues with 648 MAX-L

I recently put a system together with the 648 Max-L mobo.
P4 2.4
Maxtor ATA133
Windows XP
1 Gig PC2700 Crucial
Radeon 9700 (non-pro)
Philips Seismic Edge (was Aureal Superquad)
Having some weird issues;
1) Occasional crashes -I ran Goldmemory tests and the ram failed.....so I am RMA'g the ram but......ran Memtest 86 and it passed! ????????? So I think maybe it's good ram and the mobo is having a compatibility issue.
2) When I turn the PC off, the drives light up! Namely the operting lights actually come on and burn steady when I turn off the PC....I have to hit the main kill switch to shut them off. Really weird.
3) Maxtor has bad sector, but I am going to do a low end format that Maxtor says will fix that.
Anyone have any ideas? Once I do everything else, the next step is to get a new mobo....but this one works good other then the above issues, and I hate to waste the $75.00 I paid for what should be a good mobo. I could get another board and RMA this one....but if it IS the board I doubt I will buy the same one.
Anyone have any similar issues or ideas?

Oh, It also is in a mid tower ATX case with a 400W Mustang power supply.

Radeon 9700 pro problem with Far Cry game

When I playing far cry at High Deatils, after 5 minutes game will crashing, and i got graphic error message
I have Last update of official ati driver , and i tried OMEGA unofficial driver;
but problem still running.
Sys. Spcs.
Mobo MSI 865 Neo 2 P
CPU P4 3GHz HT
RAM 4x256 dual channel
Graphic Card Radeon 9700 pro 128MB/128Bit
PSU 480 Watt.

Game crashing could be caused by few problems, could be software or hardware. Assuming we're looking into hardware, I suggest you run MEMTEST for your RAM and see if your RAM is defected. Other than that, I can't think of any reason than power supply. But you stated you have a 480 W which should be sufficient. It could be a known problem with ATI on Far Cry? But if this's the case, ATI should be able to deal with it via Driver Update.
If it's software, this is broad. Does Far Cry have any patch?

9700 Pro / SIS 648 MAX /Games Issues

Similar Messages

Maybe you are looking for