[970A-G45 & 970A-G46] Beta UEFI/BIOS Releases [E7693AMS.1xx versions]

E7693AMS.1B1
1. Improve system stability when use G-SKILL F3-14900CL10D-16GBXL memory and DRAM ratio is 1866MHz.
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

E7693AMS.1C1
1.Update USB module to 24.
2.Fix below USB KB can¡¦t enter bios by del button Always.
a:Roccat ISKU Keyboard;
b.Rapoo v6 USB Keyboard.
3.Fix the issue:Rapoo v6 USB keyboard under DOS mode, when typing one letter,appears two letters.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

Similar Messages

[X79MA-GD45 & X79MA-SD40 (MS-7738 v1.0)] BETA UEFI/BIOS Releases [E7738IMS.1xx ]

E7738IMS.172 ==> E7738IMS.173
1.Support CPU ratio keyin function.
2.X79 support MRC cold boot fast function.
3.If plug 2 different XMP dram, auto gray XMP item.
4.Fix system can be wakeup from S4/S5 by PS2 keyboard when "Resume From S3/S4/S5 by PS2 Mouse" is set to enable and "Resume From S3/S4/S5 by PS2 keyboard" is set to disable.(vice versa)
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7676IMS.163 --> E7676IMS.164
* Adjust Lowest GT Ratio for different CPU.
* Fix OC menu can't select down(when OC Genie Button Operation Enabled).
* Fixed clear CMOS POST1 CPU Speed:0*31=0MHz.
* Fixed Intel SNB Q0 CPU (Q1CX/QAQC) can't boot & S3/S4 fail.
E7676IMS.164 --> E7676IMS.165
* Update Memory Initialize Reference Code to version:1.2.2.00
* Add U-key function support USB3.0
* Fix the issue when Onboard LAN controller is set to Disabled then PCI LAN option rom does not appear under DOS mode.
* Hide the item "Super IO Chip".
E7676IMS.165 --> E7676IMS.166
* Remove USB3.0 Legacy Mode Support item.
* Fix Resume From S3/S4/S5 by PS/2 Mouse/KB issue.
E7676IMS.166 --> E7676IMS.160
* Release MP BIOS.
E7676IMS.160 --> E7676IMS.171
* Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* Fixed UKEY compatible issue.
E7676IMS.171 --> E7676IMS.172
* Fixed default DRAM voltage incorrect issue when used low voltage memory.
* In order to unify the spec, Change String "CPU Min.Fan Speed(%)" to "CPU Min.Fan Speed" and change its values(ex: 62.5 -> 62.5%).
* Remove extra Solution for Fixed with Intel RAID mode built in HDD larger than 2.2TB can't finish Win7 installation issue.
* CPU ratio shows 60/61/62/63 in BIOS info area, if "Adjust CPU ratio in OS" is enabled.
E7676IMS.172 --> E7676IMS.173
* Fix factory INT15 tool test Hang issue.
* Fixed the BIOS Setup Green Power group volt information show N/A issue when use User Password.
* Fixed OS device manager USB 3.0 device show yellow exclamation point when disable USB controller item.
* Fixed the motherboard needs clear cmos after just can normal boot when under the S3 mode and turn off the Power.
* Fixed the pcie gen2 speed change to pcie gen1 issue when the S3 resume after.
Please note that flashing this release occurs entirely at your own risk! >>>Use the MSI HQ Forum USB Flasher<<<
Do Not use the BIOS/UEFI integrated M-Flash Routine.

[890GXM-G65 / MS-7642] BETA BIOS Releases [A7642AMS.1xx version]

A7642AMS.1B0 ---> A7642AMS.1C6
- Fix the issue about system boot failure upon using R5970-P2D2G(ATI) when onchip VGA is set to Disabled under BIOS mode.
- Fix Cmos Password issue.
- Update Agesa module to OrochiPI_0.0.7.5-1.
- Update AGESAMSI Orochi to v008.
- Fix can't install linux.
- Fix the current CPU frequency information incorrect in Cell Menu group when update to AGESA Orochi 0.0.7.5.
- Fix ADX640WFK42GR adjust cpu ratio error.
- Fix ADX640WFK42GR and AM3+ CPU ratio error under CPU-Z infomation.
- Fixed Adjust PCI-E Frequency no function.
- Update to AMD AGESA Orochi 1.1.0.0 and AMI 8.00.16_CPU-OrochiPI_1.1.0.0-1.
- Fixed AM3+ CPU L2 cache size error.
- Fixed AM3+ CPU stepping show N/A.
- Support "Core C6 State" item in CPU Feature group.
- Fixed "Adjusted HT Link Frequency" information incorrect issue and remove HT CPUNB ratio item link function code when use AM3+ CPU.
- Patch AM3 Plus CPU CPU-NB and HT Frequency error.
- Update RAID option rom to 3.3.1540.14.
- Set C6 state default as disabled and hide the item.
- Fix if plug two memorys,system will hang at 'd2' when wake up from S3.
- Display Core C6 State item when use am3+ CPU.
- Fixed it always hang '5d' issue.
Please note that flashing this release occurs entirely at your own risk! >>Use the MSI HQ Forum USB flasher<<, Method II for best results. Do NOT use the BIOS/UEFI integrated M-Flash Routine.

Quote from: saint12 on 15-January-12, 14:10:32
is this newer then 7642.1c or v1.12 is there going to be an official release?
nope, 7642.1c / v1.12 is official and newer than this 1C6

[H61M-P20/ S20 (G3) Beta UEFI Bios [E7788IMS.1xx Releases]

E7788IMS.190 ==> E7788IMS.1A1 Beta UEFI Bios
Add UpdateBiosAndME function error message issue.
Set ME Setting "M3 Power Rails Availability" as false.
Fixed Avexir 2400(patched before) S3 wakeup failed.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7788IMS.190 ==> E7788IMS.1A1 Beta UEFI Bios
Add UpdateBiosAndME function error message issue.
Set ME Setting "M3 Power Rails Availability" as false.
Fixed Avexir 2400(patched before) S3 wakeup failed.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

Msi 970a g46 stuck inside bios menu.

I got my 970a g46 just a few days back. I can boot into windows, everything in windows works fine. But when I enter the bios menu and click on anything it just freezes up. The mouse does not move, keyboard does not respond etc. I have tried changing the ram, hdd etc. Can someone please tell me whats wrong. I have not updated the bios or anything.
I Overclocked only my CPU, but its absolutely stable when I get into windows, passes prime blend, can play BF3 whole day etc
I can go into the bios and everything seems fine but as soon as I click on anything it just freezes up, I cant change any settings.
My specs are:
AMD phenom II x2 560 OCed to 3.8 ghz, (224 x17)
Corsair vengeance DDR3 4gb 1600mhz
Nvidia GTS 250
Seagate 500GB HDD
Cooler Master 600watt PSU

Clear CMOS and retry: >>Clear CMOS Guide<<

970a-g46 overheating after bios update to 2.4

my pc components: fx-8150 (3.6ghz no turbo boost) msi-970a-g46 bios v1.11 sapphire hd6870 550watt power. cpu was 38 degree. when i updated bios version 1.11 to 2.4 cpu degree is increased 38 to 50 degree.i didn't overclocked cpu. i noticed that vrm cooler is very hot too.my case is cooler master rc-690 with 5 fans.i checked cpu voltage by cpu-z, nothing channged.Still 1.328v. any idea? is it bug new bios?

the temp is fine, most probably the temp reading is fixed in the new bios update.

[H77MA-G43 /S40] Official and Beta Bios Releases 7756IMS.1xx

7756IMS.190 ===> 7756IMS.1A0 Official
190-1A0:
01.Fix Replace SATA port automatically shutdown when in WIN8 64 bit OS the shutdown Issue.
02.Update Reltek lan GOP to 2.017.
03.Fix NV's GOP crad will lag & freeze in setup when win8 Enable
04.Fix press DEL key can't entry BIOS Setup when fast boot enabled after
05.Update BIOS Setup F12 key function
06.Modify watchdog timer function code.
07.Fix 'OC Retry Count' Function error when overclock BCLK.
01.Set Fast boot to Disabled when Windows 8 Feature is Disabled.
02.Fix OC retry count always one more time then require.
03.Remove".Fix 'OC Retry Count' Function error when overclock BCLK."
04.Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
05.Fix SATA Devices Support function error issue.
06.Fix ps2 keyboard can't use in os when msi fast boot enabled.
07.Modify OC Genie Description.
08.Add the usb setup item and usbpolicyprotocol to enable or disable the usb mass storage driver.
01.Add GOP hot-plug solution
02.Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear
03.Fix 'OC Retry Count' Function issue.
04.Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
05.Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system
06.Modify BIOS Setup USB Support item
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

7756IMS.190 ===> 7756IMS.1A0 Official
190-1A0:
01.Fix Replace SATA port automatically shutdown when in WIN8 64 bit OS the shutdown Issue.
02.Update Reltek lan GOP to 2.017.
03.Fix NV's GOP crad will lag & freeze in setup when win8 Enable
04.Fix press DEL key can't entry BIOS Setup when fast boot enabled after
05.Update BIOS Setup F12 key function
06.Modify watchdog timer function code.
07.Fix 'OC Retry Count' Function error when overclock BCLK.
01.Set Fast boot to Disabled when Windows 8 Feature is Disabled.
02.Fix OC retry count always one more time then require.
03.Remove".Fix 'OC Retry Count' Function error when overclock BCLK."
04.Add to switch T1,T2 orT3 Mode To Thermistor for fintek.
05.Fix SATA Devices Support function error issue.
06.Fix ps2 keyboard can't use in os when msi fast boot enabled.
07.Modify OC Genie Description.
08.Add the usb setup item and usbpolicyprotocol to enable or disable the usb mass storage driver.
01.Add GOP hot-plug solution
02.Fix the issue that hot plug usb device will clear screeen when cpu memory changed OR oc fail message appear
03.Fix 'OC Retry Count' Function issue.
04.Fix WIN7 64 Bit OS S4 resume fail issue when BIOS Setup install password and password check set boot mode.
05.Fix USB mouse cannot be use under UEFI bios setup issue if you plug the mouse after booting up the system
06.Modify BIOS Setup USB Support item
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

P67A-GD65/P67A-GD55/P67A-GD53 Beta UEFI Bios [E7681IMS.4xx]

This has bricked my board. Now what?
My board is P67-GD53 b3.

My first plan(?) is,
I am waiting arrival of air blow soldering rework station.
As soon as I receive, I will replace preprogrammed 4.37 BIOS chip.
I ordered two, but first I will replace PRIMARY one and try it.
If problem to update SECONDARY, I will replace SECONDARY with preprogrammed one.
My second plan is,
1. Waiting arrival of SPI programmer and SOP8 to DIP8 adapter.
2. Waiting arrival of 10 Macronix MX25L6445EM2I-10G1 BIOS chip.
3. Learn how to Program to the BIOS chip with SPI programmer, it's easier than expected.
I am engagaed in PLC & Inverter for commercial dry cleaning machine.
To support my customer, I will continuously using Windows 7x64 for Omron and Yaskawa, XPx32 for Mitsubishi with multibooting.
That's why I should keep Two P67A-GD65 Desktop and Two Lenovo E520 Laptop in good working condition.
One is main use and other one is just backup.
The reason is Windows 8 PC has some restriction to install other OS, because of Secure Boot.
That's it.
PS: The official 4.20 BIOS is just BETA level BIOS.
I have PC experience during PC-XT, before PC I used NEC5200/05 PTOS(Personal Technology Oriented System).
I never had problem with BIOS flash with MSDOS, it was successful, but boot failure.

MSI 970A-G46 and posting Bios

Okay a little background,
i recently built this platform that is in my signature. it would randomly shutdown so i attempted to update the bios and wound up bricking it. after speaking with people at MSI they had me mail it to them than sent me a swapped out one. it worked well for the first couple days than started to randomly shutdown. now it will not post everything turns on but i get no video on my monitor and the usb mouse and keyboard will not light up. i have been doing some swapping around with another computer to test thing and i believe i have 2 possible scenarios of what is wrong. currently i have 4 sticks (4x4) 16 GB of patriot PGV316G1333ELQK sector 5 memory (http://www.newegg.com/Product/Product.aspx?Item=N82E16820220435) i have some (2x4) 8GB of Patriot PSD38G1600KK memory out of my sons computer that i swapped out of it to see if that was my problem and it will post and start up (possibly with only 2 sticks in not drawing as much power). so i am thinking that it is either my PSU bad or that my memory is simply incompatible. one thing i noticed is that i accidently forgot to plug in the 8 pin ATX power connector for the MB from my PSU and it acted the same way and would not post bios or show any video or light up my mouse or keyboard. so i guess my question is whether or not my PSU is bad or if its my memory. evidently the memory is 1.65v and 9-9-9-24 so is my memory drawing to much power from the MB and the PSU cant keep up? or is the memory just unusable. i have tried to understand from some of the posts here about memory and evidently XMP but i guess i am a little old used to be ddr2 etc fit amd or intel but alot has changed. any help on any suggestions on my problem would be appreciated. i cannot use my sons power supply as it only has 4 pin connector for the ATX on the MB
sincerely
heath delashmit

Quote
so i need to do some research and find a better power supply than what are some things i should look for in a quality one?
Look for a single rail psu of around 450W. At 450W it should offer at least 34A on +12v. To be on the safe side go for a quality brand psu like Corsair.
Quote
instead of getting 4 sticks of 4 gb each i should get 2 sticks of 8 gb? i am sorry i didnt understand. even though there are 4 slots only use 2?
Using two sticks is ideal and reduces the stress for the mem controller in the cpu. The more sticks you are using the more stress. Because of that e.g. ram can not be run at the speed/timings it would work with in two stick configuration. At least it is a dual channel setup meant for two sticks. Still four sticks can be used but mostly at lower speed. If the four sticks are already at their limit (like ddr3 1333 1.65v sticks) compatibility issues are guaranteed.
Two sticks of 8 GB would be ideal if that would be a matched dual channel kit and not mixing separatly bought sticks..

970A G46 bricked by bios udpate.

Try to update BIOS to the latest one.

Quote from: halftonehero on 09-December-14, 01:31:29I have my G3258 sitting at 4.2 on the H81I right now. The BIOS is counter intuitive. You would assume that values not surrounded in brackets are not changeable. They ar...

[Z77A-GD45 GAMING] UEFI Bios Releases [E77525.Hxx]

E7752.H00 Release Bios
01.Switch to PLL mode for clock buffer.
This is a Released Bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Intel Management Engine Driver>>>
Please note that flashing this release occurs entirely at your own risk!

E7752.H00 ===> E7752IMS.H11 BETA BIOS
Me Firmware: 8.1.20.1336 ===> 8.1.40.1416
VGA BIos: 2137
GOP: SNB (2.0.36.1019) + IVY (3.0.15.1016)
Raid Rom: 11.5.0.1207
Lan OptionRom: 2.1.1.5/ UEFI:1.1.0.4
01.Fix clear cmos after boot option priorities show error issue.
   02.Update 7752 OEM Gaming series Logo;
   03.Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
     "Secondary Plane Turbo Power Limit" range to 4096.
   04.Fix it will show error characters in Boot device priority after disable some boot options.
   05.Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   06.Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
     to patch some NV's graphics card capability issue.
   07.Fix some monitor hang B2 issue.
   08.Change French language error in the option "Load Overclocking Profile x".
09.Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
   10.Fix can't detect LSI 9270-8i RAID card.
   11.Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
     but the option has display garbled.
   12.Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
   13.Improve OC memory(2600Mhz+) capability for Intel 7 series project.
14.Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
   15.Modify the PCH Sata Aggressive LPM Support item default value.
   16.Update ME 8.1.40.1416.
This is a Released Bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Intel Management Engine Driver>>>
Please note that flashing this release occurs entirely at your own risk!
[/quote]

[X79A-GD65 (8D)] BETA UEFI Releases [E7760IMS.1xx versions]

E7760IMS.186 ==> E7760IMS.187
1.When use not K series CPU ,don't auto disable C-state when manual set CPU ratio > 4 core turbo ratio + overclockbin.
2.Disable Power button when NVRAM writing.
3.Add AMP Memory support.
4.Fixed X79 MRC Boot time too long.
5.Fix system random hang and can't boot to OS issue when use AMD Patriot AP38G1608U2K memory.
6.Patch after update GSE,some item can't be adjusted.
7.Fix XMP memory Dram voltage error.
8.Add OC Retry Counter Item.
9.Add Gigadevice 25Q64BSIG SPI ROM support. Change SMLink1 Thermal Reporting Select to true.
10.Fix E5 2665 CPU hang "5A".
11.Patch CORSAIR CMZ8GXM3M2A1866C9 enable XMP can't boot issue.
12.Fix tRTL & tXP always show 0 after update RC code to 4.6.4.1_Intel_SandyBridgeE_18
13.Patch new CPU 3970X "adjust CPU ratio in OS" function error.
14.Fix sometimes system will hang up in the shutdown process after idle it for some time.
15.Set CPUEnergyReadEnable & CPUTempReadEnable default to disabled.
16.Fix Keyin function.
17.Add the solution about " windows boot manger".
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

E7760IMS.431 ====> E7760IMS.432 Beta Bios
ME Version : CPT_PBG_1.5M_8.1.30.1350
RAID ROM    : 11.6.0.1702
Intel LAN OptionRom : 1.3.81
Asmedia OptionRom : 106N0951
1.Fix NVidia VGA card can't run 3DMark Vantange when OC CPU Ratio.
   2.Fix XMP can't boot because of timing error.
   3.Modify "Adjusted DRAM Frequency" function for IVB-E CPU.
   4.Modify some turn around timing for IVB-E CPU
   5.Fix K serial CPU cpu ratio can't set to more than 42.
   6.Temp solution to disable mrc fast boot for IVB-E CPU.
   7.Add IVB-E CPU adjust CPU ratio in OS support.
   8.Fix intel 3820 CPU can only OC to 42 instead of 43 when update crb15.
   9.Patch XMP1.3 Dram timing error.
   10.Patch XMP Dram tRFC error.
   11.Add XMP dram Memory-Z support.
   12.Fix IVB-E CPU can't turn dowm CPU ratio.
   13.Add Secure Boot Control a decision for Windows 8 Configuration disable.
   14.Fix ivy-e cpu s3 fail.
   15.Update CRB16 support IVY-E.
   16.Fix oemint15 function error.
   17.Fix memanuf test fail.
   18.Patch SNB-E CPU can't OC more than 46 cpu ratio.
   19.Fix SNB-E CPU Turbo mode issue because of Turbo power can't write correctly.
   20.Patch IVB-E CPU can't run ddr3-2400.
   21.Modify the PCH SATA Aggressive LPM Support item default value.
   22.Fix PCIE device cannot resume form S4.
   23.Fix MyCFG_CSTATE can't adjust to enable.
   24.Fix when opern CPUZ in OS ,then reset will hang"0xB0".
   25.Fix IVB-E CPU MSR0x194 can't be write issue.
   26.Fix IVB-E CPU turbo ratio can't be adjust isse.
27.Fix SNB-E CPU hang "0x9A" after add solution MSIOOC_jackyzhou20130604_2(SNB-E can't read msr0x1AE).
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<< => Mode 1: Point to archive file!
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.
https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577]>>Use the MSI HQ Forum USB flasher<<[/url]
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
The ME drivers on the x79's website will NOT work after the flash.
Please note that flashing this release occurs entirely at your own risk!

[FM2-A55M-E33] BETA UEFI BIOS [E7721AMS.Axx]

E7721AMS.A12
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

E7721AMS.A12 ==> E7721AMS.A21
01. Add the new solution of "some MB hang at 0x10".
1. Remove eModule - Trinity-AGESAPI_FM2;4.6.5.1_TrinityPI_019
2. Remove eChipset - AMD Trinity-Hudson / Richland-Bolton;4.6.5.1_RL_002_SB_018
3. Remove Flavor - Trinity-AGESAMSI;
4. Remove eModule - MsiOc - Trinity;
5. Add eModule - Trinity-AGESAPI_FM2;4.6.5.1_TrinityPI_020
6. Add eChipset - AMD Trinity-Hudson / Richland-Bolton;4.6.5.1_RL_005_SB_021
7. Add Flavor - Trinity-AGESAMSI; 4.6.5.1_Trinity_AGESAMSI_020-2
8. Add eModule - MsiOc-Trinity; MsiOc_Trinity_123
9. Clear case state if AC loss ocurrs.
10. Change PEG setting, auto disable onabord VGA.
1. Release MP BIOS.
1. Update DRAM Voltage coding.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

[FM2-A75IA-E53] BETA UEFI BIOS [E7792AMS.1xx]

E7792AMS.10K
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

E7792AMS.10L ==> E7792AMS.112
01. Support win8 function.
02. Updated Trinity-AGESAPI_FM2 to 4.6.5.1_TrinityPI_021.
03. Updated AMD Trinity-Hudson / Richland-Bolton to 4.6.5.1_RL_005_SB_022.
04. Update Trinity-AGESAMSI;4.6.5.1_Trinity-AGESAMSI_021-1.
05. Update MsiOc - AMD Trinity;MsiOc_Trinity_124.
01. Fix bluetooth and wifi whql test fail issue.
02. Adjust "CPU Base Frequency" default as 103 when choose OC Geine mode.
03. Add module Hardware Signature Management.
Please note that flashing this release occurs entirely at your own risk!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Make sure you unplug your PSU from A/C power and properly >>Clear CMOS Guide<< after flashing.

[FM2-A85XA-G65] BETA UEFI BIOS [E7793AMS.1xx]

E7793AMS.125
Warning! BIOS update is risky, proceed at your own risks!
For BIOS Update >>Use the MSI HQ Forum USB flasher<<
*NOTE: Please unplug the power cord from PSU, or switch it off completely and >>Clear CMOS Guide<< after flashing.

Changes:
E7793AMS.110 ==> E7793AMS.125
01. win8 solution.
01. Add solution for OCZ PCI-E SSD card & Star tech TV card.
02. Add solution for Geforce GTX295 HANG 33.
01.Fix the Corsair CMZ32GX3M4X1866C10 memory show wrong XMPinformation in setup.
1. Remove eModule - Trinity-AGESAPI_FM2;4.6.5.1_TrinityPI_019
2. Remove eChipset - AMD Trinity-Hudson / Richland-Bolton;4.6.5.1_RL_002_SB_018
3. Remove Flavor - Trinity-AGESAMSI;
4. Remove eModule - MsiOc - Trinity;
5. Add eModule - Trinity-AGESAPI_FM2;4.6.5.1_TrinityPI_020
6. Add eChipset - AMD Trinity-Hudson / Richland-Bolton;4.6.5.1_RL_005_SB_021
7. Add Flavor - Trinity-AGESAMSI; 4.6.5.1_Trinity_AGESAMSI_020-1
8. Add eModule - MsiOc-Trinity; MsiOc_Trinity_122
1. Fix OCG button GPU Freq setting.

[970A-G45 & 970A-G46] Beta UEFI/BIOS Releases [E7693AMS.1xx versions]

Similar Messages

Maybe you are looking for