970A-G45 with latest Bios not read correctly By Amd Overdrive

System is as follows
Motherboard: 970A-G45 Bios is now 1.61 all have been tried
CPU: AMD FX 8120
Memory: AMD Performance Edition 1600MHz 8 gbyte
PSU Corsair GX600
problem is that AMD BEMP profiles are grayed out,With this processor and memory the BEMP profile should be available both AMD and Patriot the makers of the memory say the problem is the bios not being read correctly by AMD overdrive.Now how do we get a bios release that will be correctly read by AMD Overdrive.here are pics of cpu-z and AMD overdrive BEMP.
I used the instructions posted here but the image in the instructions doesn't show either
http://img593.imageshack.us/img593/6560/cpuz1x.jpg
http://imageshack.us/content_round.php?page=done&l=img651/1912/cpuz2j.jpg
http://imageshack.us/content_round.php?page=done&l=img41/2338/amdoverdrivebemp.jpg
ok the links work now had to resize images

Does AMD overdrive start and work on your system, besides the BEMP thing: yes!, so that is not the question or problem here.
Do you have the hardware components that are needed to support BEMP: NO!
Quote
AMD Black Edition Memory Profile –feature is available with the following, validated memory modules:
Vendor: Part #: Supported CPU Models:
Corsair CMD4GX3M2B1600C8 965BE (C2), 955BE, 720BE
Corsair CM3X2G1600C6GT 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2A1600C6 965BE (C2), 955BE, 720BE
Corsair CMG4GX3M2B1600C7 965BE (C2), 955BE, 720BE
Mushkin 996657 965BE (C2), 955BE
Mushkin 996601 965BE (C2), 955BE
OCZ OCZ3BE1600LV2G 965BE (C3), 955BE
OCZ OCZ3BE1600C8LV2G 965BE (C3&C2), 955BE
Patriot PGS34G1600LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1600ELKA 965BE (C3&C2), 955BE
Patriot PGS34G1333LLKA 965BE (C3&C2), 955BE
Patriot PGS34G1333ELKA 965BE (C3&C2), 955BE
In addition the system must meet the following requirements in order to enable the Black Edition Memory Profile feature:
790FX, 790GX or 790X AM3 motherboard with BEMP compatible BIOS revision
AMD Phenom™ II AM3 Black Edition CPU
In any case, this is a pointless discussions. I point to the specific parts on the AMD site that have to do with "BEMP" and you ignore that and point to AMD Overdrive stuff, which not necessarely includes BEMP support unless the hardware conditions are properly fullfilled.
Contact:
- AMD Support
- MSI Technical Support
... and Patriot support, this time mentioning that your neither have a "790FX, 790GX or 790X AM3 motherboard" nor an "AMD Phenom™ II AM3 Black Edition CPU".

Similar Messages

The software for communicating with ipod is not installed correctly..

Everything used to work fine on my laptop. I'm fairly sure it was after I had uninstalled Zune crap from my laptop when my iTunes started messing up and saying "the software for communicating with ipod is not installed correctly".
I've searched the whole internet front to back about this error and most things I find are from 2005'ish. I've tried changing the registry permissions, reinstalling itunes, clearing out everything that has to do with itunes, doing all the msconfig things, manually starting the ipodservice.exe.
I still cannot figure it out and I've had this error for like 3 months. Only thing that I notice that MIGHT be odd is that I'll have ipodservice.exe running (from System) and when I open iTunes another ipodservice.exe will open (from my username) and then close after a few seconds and then I plug my ipod up and bam, the error from above comes up. Anyone have any clue? Like I said everything worked fine at one point!
Thanks!

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

D20 memory not reading correctly. Bios sees only 20 gigs lenovo diagnostic sees 24 gigs

Ok i have a d20 with one set of dimms not reading in the bios. I have tried using all combinations and it always disables one channel of one CPU not reading in the bios but if I use the lenovo diagonstic it sees all the memory and can also run the quick memory test with no errors. I would really like to get all of the slots to work anyone got an answer for this. Thanks for you help in advance.
Mike

I'm assuming you're following the correct DIMM install order based on the service label on the inside cover? The DIMM numbering is non-standard with regards to the location.
If you think you've narrowed it down to a specific DIMM slot (or pair of DIMM slots), I'd try booting the system with memory ONLY installed in that slot (or slots). Obviously it's not the recommended fill order or anything, but it could be a good test to see if you possibly have a damaged slot or something.
Also, have you been messing with the CPUs at all? Though unlikely, I would guess it's possible that a specific CPU pin in the socket could be damaged as well.

Clip notes no longer works with latest version of reader.

I understand that a security issue made Adobe upgrade Reader so that clip notes produced in Premiere CS3 would no longer play. This is a known issue. The fix is posted on this forum and it recommends upgrading to Premiere CS4. However I get the same problem as I did in Premiere CS3 i.e. clip notes is blocked by the latest version of Reader This has occured after spending a huge amount on the upgrade. Nice one Adobe what a con! I have tried to contact adobe customer support but I can not speek Punjabe and they can not speek English. What a waste of money!
Does anyone know of a fix.

Aaron,
See if this works for you: Clip Notes Review PrPro CS4

Issue with battery in settings (not reading correctly)

I am very disappointed in battery life but I am getting NO help from the interal battery meter on the. Any solution from Samsung or Google on this? Check out the screen capture to see what I mean... Says Discharging and is showing wrong info...

Turn the device off then plug it into the AC outlet until it shows it's full. Unplug the device then turn it on. Plug it back in and let it charge. Make SURE in the battery settings it is showing up as Charging(AC) and not Charging(USB). If it says Charging(USB) and it's plugged into an outlet then your cable is faulty.
Ironically both my GSM and LTE versions came with bad usb cords.

Problems with Turkish characters not displaying correctly

A user is having problems with certain Turkish characters in particular fonts not displaying correctly (as shown below).
The two fonts (Gill Sans and Helvetica LT CondensedLight) are used for English language marketing material. Ideally, for continuity, the same font would be preferred for our Turkish language marketing material rather than changing it to a similar font.
Helvetica LT CondensedLight
Turkish character “ İ ” does not display correctly in either Word or InDesign.
Gill Sans
Turkish characters “ ş ” and “ ğ ” display correctly in Word but not InDesign.
My questions are:
1. For Gill Sans, why are the characters not displaying in InDesign but are in Word?
2. I've noticed here: http://www.webtype.com/font/gill-sans-family/#glyphs-tab that the required characters are available within the Gill Sans font. Is this because the font is newer and includes the additional characters? Would this work in InDesign?

One of the big differences between InDesign and Word is that Word will happily substitute glyphs without telling you. So, unless your installs of Word and of InDesign are using different versions of Gill Sans (which is possible, BTW) then your s-with-cedilla and your g-with-macron are actually not in Gill Sans but in some other font. I'm guessing Arial.
It's possible that you have more than one Gill Sans installed (e.g. one in your Document Fonts folder and another in your system fonts folder) that have different glyph complements. Gill Sans has been around a long time, and the version I have from the 90s has no Turkish support whatsoever.
As far as the capital-I-with-dot, you can check your glyph coverage in a variety of ways. In both InDesign and Word, you can open up a window that shows you all of the glyphs in a font. In InDesign, find it in Type -> Glyphs. In Word, it's called "Insert Symbol" and you can find it in Word 2010 by going to Insert -> Symbol -> More Symbols. I am guessing that the answer to this question is simply that your cut of Helvetica LT has no cap-I-with-dot. You'd need to pick a font that actually has support for Turkish. On WIndows, I use a very full-featured freebie called BabelMap to check font coverage. They have a Web version here:
http://www.babelstone.co.uk/Unicode/babelmap.html
but I personally prefer the downloadable .exe file.

Not reading correctly?

I just got a 4th Gen Nano for Christmas, etc.
I have another video Nano registered to my computer and don't have a problem with it. However, when I plug this new iPod into the USB to register it, nothing happens except a window pops up with the folders/contents of my E: Drive. Apparently it's not reading it correctly, but how can I fix this so I can use my new iPod?
I have the current version of iTunes installed and I'm running on Windows XP.

The problem has something to do with "iPodService Module has encountered a problem and needs to close". I read another thread somewhere about it, but their problem seemed to be stemming from Norton. I'm using avast! antivirus.
I've tried uninstalling/reinstalling iTunes.
I still had no idea what's wrong. .-.

Abstract classes and methods with dollar.decimal not displaying correctly

Hi, I'm working on a homework assignment and need a little help. I have two classes, 1 abstract class, 1 extends class and 1 program file. When I run the program file, it executes properly, but the stored values are not displaying correctly. I'm trying to get them to display in the dollar format, but it's leaving off the last 0. Can someone please offer some assistance. Here's what I did.
File 1
public abstract class Customer//Using the abstract class for the customer info
private String name;//customer name
private String acctNo;//customer account number
private int branchNumber;//The bank branch number
//The constructor accepts as arguments the name, acctNo, and branchNumber
public Customer(String n, String acct, int b)
    name = n;
    acctNo = acct;
    branchNumber = b;
//toString method
public String toString()
String str;
    str = "Name: " + name + "\nAccount Number: " + acctNo + "\nBranch Number: " + branchNumber;
    return str;
//Using the abstract method for the getCurrentBalance class
public abstract double getCurrentBalance();
}file 2
public class AccountTrans extends Customer //
    private final double
    MONTHLY_DEPOSITS = 100,
    COMPANY_MATCH = 10,
    MONTHLY_INTEREST = 1;
    private double monthlyDeposit,
    coMatch,
    monthlyInt;
    //The constructor accepts as arguments the name, acctNo, and branchNumber
    public AccountTrans(String n, String acct, int b)
        super(n, acct, b);
    //The setMonthlyDeposit accepts the value for the monthly deposit amount
    public void setMonthlyDeposit(double deposit)
        monthlyDeposit = deposit;
    //The setCompanyMatch accepts the value for the monthly company match amount
    public void setCompanyMatch(double match)
        coMatch = match;
    //The setMonthlyInterest accepts the value for the monthly interest amount
    public void setMonthlyInterest(double interest)
        monthlyInt = interest;
    //toString method
    public String toString()
        String str;
        str = super.toString() +
        "\nAccount Type: Hybrid Retirement" +
        "\nDeposits: $" + monthlyDeposit +
        "\nCompany Match: $" + coMatch +
        "\nInterest: $" + monthlyInt;
        return str;
    //Using the getter method for the customer.java fields
    public double getCurrentBalance()
        double currentBalance;
        currentBalance = (monthlyDeposit + coMatch + monthlyInt) * (2);
        return currentBalance;
}File 3
    public static void main(String[] args)
//Creates the AccountTrans object
        AccountTrans acctTrans = new AccountTrans("Jane Smith", "A123ZW", 435);
        //Created to store the values for the MonthlyDeposit,
        //CompanyMatch, MonthlyInterest
        acctTrans.setMonthlyDeposit(100);
        acctTrans.setCompanyMatch(10);
        acctTrans.setMonthlyInterest(5);
        DecimalFormat dollar = new DecimalFormat("#,##0.00");
        //This will display the customer's data
        System.out.println(acctTrans);
        //This will display the current balance times 2 since the current
        //month is February.
        System.out.println("Your current balance is $"
                + dollar.format(acctTrans.getCurrentBalance()));
    }

Get a hair cut!
h1. The Ubiquitous Newbie Tips
* DON'T SHOUT!!!
* Homework dumps will be flamed mercilessly. [Feelin' lucky, punk? Well, do ya'?|http://www.youtube.com/watch?v=1-0BVT4cqGY]
* Have a quick scan through the [Forum FAQ's|http://wikis.sun.com/display/SunForums/Forums.sun.com+FAQ].
h5. Ask a good question
* Don't forget to actually ask a question. No, The subject line doesn't count.
* Don't even talk to me until you've:
    (a) [googled it|http://www.google.com.au/] and
    (b) had a squizzy at the [Java Cheat Sheet|http://mindprod.com/jgloss/jcheat.html] and
    (c) looked it up in [Sun's Java Tutorials|http://java.sun.com/docs/books/tutorial/] and
    (d) read the relevant section of the [API Docs|http://java.sun.com/javase/6/docs/api/index-files/index-1.html] and maybe even
    (e) referred to the JLS for "advanced" questions.
* [Good questions|http://www.catb.org/~esr/faqs/smart-questions.html#intro] get better Answers. It's a fact. Trust me on this one.
    - Lots of regulars on these forums simply don't read badly written questions. It's just too frustrating.
      - FFS spare us the SMS and L33t speak! Pull your pants up, and get a hair cut!
    - Often you discover your own mistake whilst forming a "Good question".
    - Often you discover that you where trying to answer "[the wrong question|http://blog.aisleten.com/2008/11/20/youre-asking-the-wrong-question/]".
    - Many of the regulars on these forums will bend over backwards to help with a "Good question",
      especially to a nuggetty problem, because they're interested in the answer.
* Improve your chances of getting laid tonight by writing an SSCCE
    - For you normal people, That's a: Short Self-Contained Compilable (Correct) Example.
    - Short is sweet: No-one wants to wade through 5000 lines to find your syntax errors!
    - Often you discover your own mistake whilst writing an SSCCE.
    - Often you solve your own problem whilst preparing the SSCCE.
    - Solving your own problem yields a sense of accomplishment, which makes you smarter ;-)
h5. Formatting Matters
* Post your code between a pair of {code} tags
    - That is: {code} ... your code goes here ... {code}
    - This makes your code easier to read by preserving whitespace and highlighting java syntax.
    - Copy&paste your source code directly from your editor. The forum editor basically sucks.
    - The forums tabwidth is 8, as per [the java coding conventions|http://java.sun.com/docs/codeconv/].
      - Indents will go jagged if your tabwidth!=8 and you've mixed tabs and spaces.
      - Indentation is essential to following program code.
      - Long lines (say > 132 chars) should be wrapped.
* Post your error messages between a pair of {code} tags:
    - That is: {code} ... errors here ... {code}
    - OR: [pre]{noformat} ... errors here ... {noformat}[/pre]
    - To make it easier for us to find, Mark the erroneous line(s) in your source-code. For example:
        System.out.println("Your momma!); // <<<< ERROR 1
    - Note that error messages are rendered basically useless if the code has been
      modified AT ALL since the error message was produced.
    - Here's [How to read a stacktrace|http://www.0xcafefeed.com/2004/06/of-thread-dumps-and-stack-traces/].
* The forum editor has a "Preview" pane. Use it.
    - If you're new around here you'll probably find the "Rich Text" view is easier to use.
    - WARNING: Swapping from "Plain Text" view to "Rich Text" scrambles the markup!
    - To see how a posted "special effect" is done, click reply then click the quote button.
If you (the newbie) have covered these bases *you deserve, and can therefore expect, GOOD answers!*
h1. The pledge!
We the New To Java regulars do hereby pledge to refrain from flaming anybody, no matter how gumbyish the question, if the OP has demonstrably tried to cover these bases. The rest are fair game.

The software required for comunicating with ipod is not installed correctly

Hey
I have recently had to reinstall windows xp on my laptop as the moder board crushed
while the installation was done by a professional, since then everytime i plug my 30gb fifth generation ipod to synch with my Itunes library the following message appears:
"The software required for communicating with the ipod is not installed correctly. Please Reinstall Ipod to reinstall the ipod's software."
what does that mean? i thought
I tried to reinstall itunes over twenty times, sometimes deleting it beforehand using the task messenger, but no use.
I have checked to see if my ipod works with other computers and he does, therefore its a problem of the itunes, or my computer.
I am reaching desperation, as i am unable to update and synch my ipod for over a month now.
i need either a solution or a way of maybe installing an older version of itunes, which may work.
can anyone help?
please?

i did the research for you and found the link for the 7.5...
http://www.mydigitallife.info/2007/11/07/direct-download-itunes-75-to-activate-i phone-anywhere-internationally/
Hope that works for ya...

Software required for communicating with ipod is not installed correctly

I got the error message today! 'the software required for communicating with the ipod is not installed correctly'
I have reinstalled itunes and all my music etc. has been saved but I still get the message!? Dont know what to do? HELP!

When you reinstalled, did you just uninstall iTunes, then download it from apple.com/itunes/download?

Thunderbolt EX2 cards working on Asus boards with latest bios

I finally got a chance to test this. The Asus Thunderbolt EX2 cards are working with the latest bios on the X99 Deluxe. Requires some bios settings and bottom slot location but it does work.

No one has this problem at all?
I want to find out for sure if there is a fix before going back to the older drivers.
If i do the test in the spdif out properties panel -> supported formats. When I do the dolby digital test I see the light come on in my receiver and hear sound just thru the front speakers. But when I use power DVD 9 ultra with the latest patch. I don't get the digital light on my receiver. I had this working with the previous drivers released earlier this year.
Message Edited by galvin on 08-7-2009 0:54 [email protected]

I have a problem with a table not resizing correctly in some browsers

Hi,
I am using the fluid grid layout in DW. I have created a table to hold some images and text. I have the table set to 100% instead of a fixed width.
The table and images resize correctly at my smartphone breakpoint in DW and Crome. They do not resize correctly in IE10 or Firefox.
I hope somebody can point out the error of my ways.
Thanks
http://cupcakemary.skeeterz71.com/_cm_mockup/menu.html

Tables do not work well in Fluid Grid Layouts because table width is always going to be determined by combined width of the content inside it. As such it won't re-scale past a certain point no matter what you do. I typically avoid using tables for layouts anyway. But especially in FluidGrids.
If you build your FluidGrid layout correctly from the start, there's little reason to use tables.
LayoutDiv 1 LayoutDiv 2 LayoutDiv 3
float:left float:left float:left
On smaller displays, these divs will naturally stack vertically.
LayoutDiv1
LayoutDiv2
LayoutDiv 3
Nancy O.

Small size file can not read correctly on other linux

Hi, I am running archlinux 0.8 on my laptop, and there is another linux runs kernel version 2.6.20 with root filesystem of debian v3.1.
I wrote a shell script which reads a small, 49 bytes, only 1 line conf file on my archlinux, it works fine.
But if I copy script & conf files to debian, the script can not read conf file with:
while read f;do; echo $f; done < conf
but `cat`,`more` commands can read it. I have to open conf file with vi on debian and do nothing but :wq rewrite it to make script working.
Both arch & debian use ext3 file system. Could anyone tell me why? thanks.

I think your command is wrong: it works with zsh and doesn`t work in bash. Maybe you should remove extra ';'?
while read f;do echo $f; done < conf

Help with indesign epub not appearing correctly on ipad

Can someone please tell me why my epub does not appear correctly when viewed on my ipad? It seems to push like a quarter of my full page image onto the next page. I don't want it to do this! I want it to looks like it does in ibooks on my mac.
See the links to below images that show how it looks on indesign, ibooks and ipad.
https://www.flickr.com/photos/118558552@N02/15536244571"
"https://www.flickr.com/photos/118558552@N02/15352308439"
https://www.flickr.com/photos/118558552@N02/15538941145"
Thankyou for looking, and I hope someone can answer!

Check this thread regarding the same issue and see if some of the suggestions there help you: IMAGES cut off when converting to epub

Help. Tried to flash Z87-G45 to latest bios but now does not load

Hi I tried to update the bios today to latest version for the MSI Z87 G45 mb.
It started erasing the bios and got to about 64% and then said there was an error and rebooted.
Now nothing shows up on the screen. Power is on.
I've reseated the ram.
Reconnected all connectors
Removed battery for about 5-10 minutes.
Tried shorting the clearcomos jumper
Nothing.
Is there anything that I can do?

Quote from: Froggy Gremlin on 04-March-14, 06:37:22
Take it to a shop with an SPI flash programmer device, or send it for warranty RMA to an MSI Service Center.
Next time, use the archive and flash method found here;
https://forum-en.msi.com/index.php?topic=163900.0
How much does one cost or where can I buy one?

970A-G45 with latest Bios not read correctly By Amd Overdrive

Similar Messages

Maybe you are looking for