9800 BB Torch Synchronization Error CRTranRec::GetModifiedInfo : Modified Infor not available

Hi,
Has anyone seen the 9800 BB Torch Synchronization Error, CRTranRec::GetModifiedInfo : Modified Infor not available?
I look forward to your thoughts,
Regards,
Jeffrey

I'm sorry to get back to you so late.
What organizer on your computer are you sychronizing with (Microsoft® Outlook® for example)? Do you get this message specifically when trying to perform a synchronization or a backup?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Error message "iTunes Helper Resources not available" and saving to wrong Drive

I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
Please someone help ...
Thanks.

Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
"Invalid drive X:\" install errors

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days

Hello Vivek here, i was trying to download apps from itunes and i could get the error message as itunes currently not available for past 2 days, is there any problem ideally or, please leave a reply
<Email Edited By Host>

Hi vivekanandanganesan,
Thanks for using Apple Support Communities. This article has some steps you can try if you are unable to connect to the iTunes Store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari

Adobe Acrobat 7.0 Pro PC with Windows 7 - error mess "Adobe PDF Printer - not available" Help?

Just loaded my old Acrobat 7.0 Professional on new PC with Windows 7 - Error message "Adobe PDF Priner not available. Therefore do not have option of Adobe printer when using Word.
Any ideas as to what - if anythjing I can do?

Hi,
Technically acrobat 7 not not designed for windows 7 OS. You can try to install the pdf printer manually but it's not guaranteed :
Click the Windows "Start" menu, select "Control Panel," choose "Hardware and Sound," click the "Add a Printer" link under Devices and Printers.
Click "Next" and select "Local Printer Attached to This Computer."
Remove the check from "Automatically Detect and Install My Plug and Play Printer" and click "Next."
Select "My Documents\\*.pdf (Adobe PDF)" in the port selection drop-down menu and click "Next."
Select the "Have Disk" option and click the "Browse" button to open a dialog box.
Select the "AdobePDF.inf" file located in the AdobePDF folder in your Program Files directory under "Adobe" | "Acrobat 9.0" | "Acrobat" | "Xtras."
Select the first item on the list of Adobe PDF Converter options and click "Next."
Type "Adobe PDF" in the field for a printer name and click "Next."
Wait for two minutes for the system to process the drivers and click "Finish" to close the Add a Printer wizard.
Hope this helps.

Problem by startup Oracle 8i!!And Error Code: ORA 01034-ORACLE not available!!

Hello all!
I need urgent help!!
I'm trying to start Oracle 8.1.6 i on Solaris 8. But there are lot of error:
1. During initialising the database with dbassist, the error Code Error Codes: ORA 01034-"ORACLE not available" and ORA-01012-"not logged on" were shown.
2. I'm trying to start Oracle 8i on Sun Solaris 8 by typing svrmgrl-connect interal-startup. But the following was shown on by screen:
passau% svrmgrl
Oracle Server Manager Release 3.1.6.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
SVRMGR> connect internal
Connected.
SVRMGR> startup
LRM-00109: could not open parameter file '?/dbs/[email protected]'
ORA-01078: failure in processing system parameters
Please help me!!
My e-mail Adress: [email protected]

I am pretty sure this has to do with the SGA..
what you may have to do is adjust you
system file
Here the values for /etc/system file: for more info look under
Oracle specific parameters (documetation) set shmsys:shminfo_shmmax=122496729 set semsys:seminfo_semmap=150 set semsys:seminfo_semopm=100 set semsys:seminfo_semvmx=12767 set semsys:seminfo_semmni=200 set semsys:seminfo_semmns=200 set semsys:seminfo_semmsl=200 set semsys:seminfo_semmnu=200 set semsys:seminfo_semume=100 set shmsys:shminfo_shmmin=100 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=100
good luck
[email protected]
null

Business Package for Assets 50.3.1: Error in Source. Message not available

Hi
Just deployed the Business Package for Assets 50.3.1 on Portal version 7 with SP8, when running the Assets detail, my assets iviews always display: "Error in Source. Message not available."
even all other iviews on the same page still work as expected.
has anyone got the similar problem before? please help!!!
many thanks in advance!
Gang

When logged on to R/3, choose the following from the menu:
System > Status...
In screen area "SAP System data" click on the button next to "Component version".
Look for the component named only "PI", and check wether it exixts and what release it is, it should be at least 2003_1_XXX (where XXX represents your R/3 Appl version).
Also, check that you have the component "WP-PI" installed with the release 600_XXX (where XXX corresponds to your SAP Basis release).
I know I needed to check/install these two when I configured the Assets package.
/Christine

MSS iView Error "Error in Source. Message not available"

After installing MSS 60.1.5 (System = HP-UX 11.11 ORACLE 9.2.0.5. SAP EP 6.0 ON WEB AS 6.20)
and trying to use the the iViews in the MyBudget workset we are getting the following errors:
Using iView Chritical Variance on My cost centers and assets monitor we are getting the error Error in Source. Message not available.
Using iView Critical Line Items on My Cost Centers we are getting the error An error occurred in the SAP system10 The specified SAP system could not be found null SAP_R3_Financials.
We have made system allias for our system oursystem = SAP_R3_Financials and the user we are using have accesse to the portal as well as the backend system.
When creating normal SAP transaction iViews we have no problem accessing the backend system from the Portal.
Any good ideas will be appriciated.
Kurt

Check out this note 790896.

Getting error message ORA-01034: Oracle Not available

Hi
I have a VM Machine with OEL 4.5 and have oracle 11g release 2 installed but do not have database created.
on the command prompt I am getting error message
ORA-01034: Oracle Not available
Process ID: 0
Session ID: 0 Serial Number: 0
is it because I have not created the database... ?
if yes can some one please guide me how I can create database...
**** Sorry for asking these silly questions however I am new to oracle, just want to kick start my carrier in oracle...**** :-)

ParikshitBhandari wrote:
Hi
Welcome to the forum.
Before proceeding, please read the forum FAQ. The link is in the upper right corner of this very page.
I have a VM Machine with OEL 4.5 and have oracle 11g release 2 installed but do not have database created.
on the command prompt I am getting error message
ORA-01034: Oracle Not available
Process ID: 0
Session ID: 0 Serial Number: 0
is it because I have not created the database... ?Yes, it is because you have not created a database.
It is A Good Thing (tm) that you actually copied and pasted the entire error message. Some here seem to think "it doesn't work" is an actionable error message. However, for future reference, error messages are the result of something happening. They are far more meaningful if you were to also copy and paste the command that triggered the error.
if yes can some one please guide me how I can create database...
Easiest way is to use the utility 'dbca' (database configuration assistant).
**** Sorry for asking these silly questions however I am new to oracle, just want to kick start my carrier in oracle...**** :-)=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

CUCIMOC 8.0 Error "Start converstation capability is not available"

I've got a user that I'm trying to setup CUCIMOC 8.0 for. We're using the latest CUCIMOC client release, Office Communicator 2008 R2 at the latest CU level, and Call Manager 7.1. I've got everything setup for the user identically to how other (working) CUCIMOC users on our CM are setup. The user is able to login to the CUCIMOC client, and is able to use his phone to make calls, but when he tries to use the softphone he gets the error message:
"Failed to start converstation. Start conversation capability is not available."
Digging further, when looking at this device in CUCM Admin, the softphone device shows up as Active and Trusted, but doesn't show a registration.
Looking further, in the Core client log from his machine, I get the error below (indicating the softphone isn't able to register):
Any ideas?
2011-04-25 12:41:46,292 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Incoming --- SystemServiceEndpoint - <heartbeat xmlns="http://service.system.v2.soap.uc.cisco.com"><clientId>CUCIMOC-1</clientId></heartbeat>
2011-04-25 12:41:46,293 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Outgoing --- SystemServiceEndpoint - <ns2:heartbeatResponse xmlns:ns2="http://service.system.v2.soap.uc.cisco.com" xmlns:ns3="http://system.v2.soap.uc.cisco.com/types"><ns2:ok>true</ns2:ok></ns2:heartbeatResponse>
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_read_socket : socket error=92011-04-25 12:42:02,911 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-SIP_REG_STATE: 1/51, sip_reg_sm_process_event: SIP_REG_STATE_REGISTERING <- E_SIP_REG_TMR_RETRY2011-04-25 12:42:02,911 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_detach_socket : Invalid socket2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmsub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiLineRegState(119)] - Registration status for line:1 is:false
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.lineNotify(777)] - Registration state not changed
2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (60) is invalid2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (61) is invalid2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmsub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.912 [12bc] SIPCC-UI_API: 1/0, ui_set_sip_registration_state: 02011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiRegAllFailed(138)] - Registration failed for all lines:
2011-04-25 12:42:03,011 ERROR [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.regAllFailed(850)] - All registrations failed.
2011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.updateRegStateAllLines(1073)] - regState = false

Hi,
Try the following-
1) Uninstall local antivirus/firewall
2) disable all network adapters except the one being used
3) update hardware driver such as video and audio
4) uninstall cucimoc and re-install using local admin permission
Also try the latest version cuci-lync 8.5.2 (it is compatible with OCS 2007 R2 and up)
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp64340
http://www.cisco.com/cisco/software/release.html?mdfid=283665631&softwareid=283732952&release=8.5%282%29&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rm
Thanks

Problem in converting word to html- file get error msg 'This command is not available because no document is open'

Hi,
I write the some asp code to save the word file from client machine to server machine , and convert it into the html file.
it working fine when i debug the code into the visual studio but when i deploy code on iis it give me a error 'This command is not available because no document is open' , while i try to save file into html format.
lot of time i try this give all the security full access to iis user and other things .
can any one help me. i fully frustrated from this problem.
my need only upload the word document from client to server machine and convert it into the word document.
only IIS give me the problem, suggest me what setting i need to do in iis
please help me humble request

Hi,
In this forum we mainly discuss questions about Office client questions and feedbacks, issues related to coding are not supported here.
Based on the description, although the question is about converting Word documents, it's more likely to be a permission issue, the question is better to be posted in the IIS.NET forum:
http://forums.iis.net/
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HTTP Status 404 error -- The requested resource is not available.

Hi ,
i am trying to run a sample struts2 program using java1.5 , tomcat5.5 but getting the error ...
* The requested resource (/Struts2Sample/) is not available.*
i am listing my files below.. kindly help...
web.xml -----------------
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>Struts2Sample</display-name>
<filter>
<filter-name>struts</filter-name>
<filter-class>org.apache.struts2.dispatcher.FilterDispatcher</filter-class>
</filter>
<filter-mapping>
<filter-name>struts</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
<servlet>
 <servlet-name>home</servlet-name>
 <jsp-file>HelloWorld.jsp</jsp-file>
</servlet>
<servlet-mapping>
 <servlet-name>home</servlet-name>
 <url-pattern>/home</url-pattern>
</servlet-mapping>
</web-app>
struts.xml ---------------
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE struts PUBLIC
"-//Apache Software Foundation//DTD Struts Configuration 2.0//EN"
"http://struts.apache.org/dtds/struts-2.0.dtd">
<struts>
<package name="example" extends="struts-default" namespace="/">
<action name="HelloWorld" class="example.HelloWorld">
<result>/HelloWorld.jsp</result>
</action>
</package>
</struts>
HelloWorld.jsp ----------------------
<%@ taglib prefix="s" uri="/struts-tags" %>
<html>
<head>
<title>Struts 2 Hello World Application!</title>
</head>
<body>
<h2><s:property value="message" /></h2>
Current date and time is: <s:property value="currentTime" />
</body>
</html>
ExampleSupport.java ---------------------------
package example;
import com.opensymphony.xwork2.ActionSupport;
* Base Action class for the Tutorial package.
public class ExampleSupport extends ActionSupport {
HelloWorld.java --------------------
package example;
public class HelloWorld extends ExampleSupport {
public String execute() throws Exception {
setMessage(getText(MESSAGE));
return SUCCESS;
* Provide default valuie for Message property.
public static final String MESSAGE = "HelloWorld.message";
* Field for Message property.
private String message;
* Return Message property.
* @return Message property
public String getMessage() {
return message;
* Set Message property.
* @param message Text to display on HelloWorld page.
public void setMessage(String message) {
this.message = message;
My directory structure ....
D:\tomcat5.5\webapps\Struts2Sample ---- this has my jsp file.
D:\tomcat5.5\webapps\Struts2Sample\src\example ---- this has both java source files..
D:\tomcat5.5\webapps\Struts2Sample\WEB-INF\classes\example ---- this has compiled class files
D:\tomcat5.5\webapps\Struts2Sample\WEB-INF\classes ---- this has my struts.xml file
D:\tomcat5.5\webapps\Struts2Sample\WEB-INF\lib ---- this has all my jars..
D:\tomcat5.5\webapps\Struts2Sample\WEB-INF --- this has my web.xml file
kindly let me know i am making mistakes if any...
i am using url as : http://localhost:8080/Struts2Sample/
Thanks,
Nads

Hi ,
when iam trying to deploy struts 2 application iam getting 404 error. in tomcat 5.5.23
if u got the solution pls help me
regards
srini

Receiving error - The requested resource is not available

Hi,
I am trying to deploy a new Project (WebApplication1) in NB5.0. I started with a very simple index.jsp and a small NewServlet. NB5.0 builds the project successfully. When I try to run, it opens a URL - http://localhost:8080/WebApplication1/WebApplication1, but then displays an error message - "The requested resource (/WebApplication1/WebApplication1) is not available." When I try to access - http://localhost:8080/WebApplication1/index.jsp, it loads the JSP successfully and also takes me to the servlet. Does anyone know why is the URL - http://localhost:8080/WebApplication1/WebApplication1 not pointing to index.jsp? I have index.jsp as welcome-page in web.xml.
Thanks...

In the Projects tab, right click WebApplication1 and then choose properties in the very end. In the Project Properties window, click the run in the left panel, check the context path in the right panel. Make sure it's /WebApplication1/WebApplication1 (default should be WebApplication1, I think).
Then open web.xml to make sure the welcome page is added as index.jsp.

File2Idoc - Error [EDI: Partner profile inbound not available]

Hi All,
I am executing file to Idoc Scenario, It is picking the file from sender & delivering to Idoc as well (fields) in R/3 system and showing chequered flag SXMB_MONI.
But If go to WE02 in R/3 : It is showing that Partner Profile not availbe , I have already mentioned in We20 - R/3 system.
EDI: Partner profile inbound not available
Diagnosis
An inbound partner profile could not be found with the following key:
I checked in Idoc - Control Segments - > It is shwoing Wrong recipient Partner No & Type
Recipient Information :-
Partner No - CLNT_300              Expecting   100008
Partner Type - LS                       Expecting     LI
Where are to maintain these entries ?
Please do the needful.
Regards,
~Anshul

Sandeep,
I am using simple Idoc Delivery:-
Idoc:DELINF.DELVRY05      Messgae Type u2013 DELINF     Process Code -- DELV
But I am getting error in R/3 - WE02
I checked in all entries in We20
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/PEVCLNT100/LS//DELINF////
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST    test flag
Thanks,
Anshul

Error: "EDI: Partner profile inbound not available"

Hi All,
iam getting the following error while loading the FI related data.
"EDI: Partner profile inbound not available"
Suggestions are appreciated.
thanks
Kiran

Hi,
Refer the link:
Re: EDI: Partner profile not active
With rgdS,
Anil Kumar Sharma .P

9800 BB Torch Synchronization Error CRTranRec::GetModifiedInfo : Modified Infor not available

Similar Messages

Maybe you are looking for