9800 touch screen

A couple of months ago my front panel button to my Torch 9800 which is about a year old fell off. Since my phone was looking a little bit scratched up i decided to purchase a full housing and tool kit so i could disassemble my phone and change it's housing as well as replace the top buttons. The process was very complicated and my dad helped me to do most of it but we used a video tutorial to make sure we are doing everything correctly. Once we were finished it turned out my touch screen had stopped working and my phone's 'handset' speaker was not working so i could only use the speakerphone. If i was go to a repair shop would they be able to disassemble my phone again to try and get the touch screen woring again and possible add a handset speaker to it?
Secondly today my top buttons panel fell off 'again' and while my phone was in my pocket my front button's flex cable broke so not i can no longer use my 'menu' or 'call' button. If i was to go to a repair shop would they be able to fix this and how much do you think it would cost?

Similar Messages

Torch 9800 touch screen only works when slid open.

Hello everyone, this is my 1st post but I've been lurking the forum for some time. I'm running a Torch 9800 on AT&T right now on v6.0.0.600
This is what's happened with my phone: as the subject notes, my touch screen only seems to work when I slide open the phone.
What I've tried so far that doesn't work: rolling back software, rolling the software forward again, hard resets, soft resets, adjusting intervals for the touch screen.
The weird part is that I saw an older thread that had the exact opposite problem(touch screen only worked when the phone was slid closed). I have a level/ruler app for my phone and it's showing that the phone knows when it's tilted/angle/orientation. I've also closed the phone, opened it slightly (about the width of my thumb) and it stays horizontally oriented + I'm able to use the touch keyboard that way.
Anybody have a suggestion as to what I can try next to fix this? I haven't gone so far as to just go and get a 9810 yet, but i'm considering it.

Thanks for the post.
Has it in anyway fallen or pressed hard at any point? It could be the belt, which would just need you to go with it to a certified repair center and get it secured.
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

9800 Touch screen not working

as mentioned in the subject
am having a problem with my 9800 torch that the screen touch sensitivity is not working at all. i tried formating the apps from it but still nothing happened
also it reboots many times automaticaly and thats makes it difficult to do anything to fix the screen problem
please i need your help to fix this issue
Solved!
Go to Solution.

Try a Battery pull please, with the BlackBerry device powered ON, remove the battery 15 seconds and then reinsert the battery to reboot device. This will clear all cache like rebooting a PC. Then try again and see if your problem persists.
What OS are you on? On your device, type in a new message MYVER and a space after to see and report back please.
On device go to Options, Device, Application Management is a great way to see what your apps are doing with your CPU usage on Smartphone. Just slide top bar to CPU and see what is going on. Also touch the CPU menu to see other time variables. I found out that an app was eating away CPU cycles on mine
Disable Compression on media card? go to Options, Device, Storage
using a custom theme? try it for a day the factory default one to rule out your theme
remember the esc key closes most apps, except for GPS and some chat clients. the other apps need to use menu and then exit or close. The farthest key to the right is a home key and does not close any apps per se but will end calls.
If the above does not work then maybe running a new OS is in order.
Manual device OS upgrade instructions:
1. First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Do a backup of your device first, using Desktop Manager > Backup. Close Desktop Manager upon completion and unplug BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/
3. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
4. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
5. This step is not needed unless there is an issue on next steps. Use BBSAK from BBSAK.org and wipe the device (after doing a complete backup) then after you get the error 507 (no OS installed) then proceed to step 6
6. remove internet connection to PC and reboot PC.
7. Plug in BlackBerry and double click on "Loader.exe." It's located in the same place as the above vendor.xml file was in.
8. if you did Step 5, restore from back up. Follow this KB if needed http://www.blackberry.com/btsc/KB10339
Enjoy the new OS.
if after all of this then maybe you have an issue with your device and will need to contact place of purchase if under warranty still.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Torch 9800 touch screen

I have been rebuilding/refurbishing a Torch 9800 and have replaced the LCD, Main Ribbon Flex and touchscreen among other parts. Only the right half of the touchscreen reacts to touch. The left half is non re-active. Any fix?
Solved!
Go to Solution.

I just talked to a friend who repairs BlackBerrys. He says you likely damaged the ribbon that connects the LCD to the main board. He said he did the same thing once himself.
Post back with how you fare on this. I'm curious, is it possible to take out the wobble in the display when touch typing with the device closed? I've never had mine apart but have been considering it to do something about the rattle when I type.
John
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Physical keyboard not working, touch screen not working on Torch 9800

I've had this phone a little over a year. First, my physical keyboard stops working. It is the one I use the most. I wasjust using the virtual keyboard and when I was watching tv, I decided to turn my phone on to check it (as I usually keep it on silent.) I turned it on and the touch screen would not work for me. I opened the physical keyboard, and it is working fine now, as is the track pad, but I cannot use the touch screen by actually touching it. Anyone else have this problem? How do I fix it?
**Edit** I checked my phone right after I posted it and now neither are working.

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there an updated touch screen BB 9500?

I have a touch screen BB Storm 9500 which I love, but it is giving me some problems so I am looking at replacing it with the updated version. But there does not seem to be any new touch screen BB available now in Singapore. Is that correct?

yes there is a Torch 9860 full touch/9850. Theres the Torch 9800/9810 Touch + QWERTY. Bold 9790/99x0 Touch & Type. There is also a Curve 9380 full touch device!
If you have an answer to your question then please click “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit.
BB 8700 -> Bold 9000 -> Curve 8520 -> Bold 9700 -> Curve 9320 -> Bold 9900 -> BlackBerry Z10 + PlayBook 64 GB Wi-Fi

Problem push and hold on a Surface Pro tablet's touch screen

Hi,
I tried posting this before, but I can't find my origional post so I hope I'm not spamming accidentally.
I have a problem with my program on a Windows 8.1 Surface Pro tablet. I programmed a button to be 'push-and-hold', but when I touch the tablet nothing happens until I release my finger. This briefly controls the button. When I connect a USB mouse to the tablet, it responds normally; when I press the left mouse button: the button in my program goes down until I release the mouse button. I tried about every setting in the Touch section of the Windows control panel without any succes.
Does anyone have a suggestion?
Any help would be greatly appreciated.
Chris

Previous Post.
http://forums.ni.com/t5/LabVIEW/Press-and-hold-on-a-Surface-pro-touch-screen/m-p/2816346
If you clicked on your username and looked at your profile, you can see the messages you've created or replied to in the past.

Why did my brand new Ipod 5g 32gb touch screen stop working?

So I got this ipod from the Genius Shop for about a month. A few days ago when IOS 7.1 came out, I updated it. However, the ipod seems to lag a little. Today, I was charging my ipod and for some reason, when I turn it on, the touch screen stop working (the ipod is in perfect condition). The home button, volume button and the on/off button all works fine except for the touch screen. I want to restore everything on my computer, but I can't get pass the lock screen (the touch screen seems to stop working). I just can't do anything on this ipod anymore beside turning it on and off. I can't even power it off because the touch screen is no longer touchable. So how can I restore everything, or do something about this ipod to work again. Can I still take this back to the Genius Shop and get another one without additonal charge?

If the reset does not work try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Has anyone used a touch screen monitor with scxi.I am having video lock ups while using LV and MAX

I have a PCI-MIO-16XE-50 daq card (dev1) connected to a scxi-1000 chassis address 0 ID 1, with a scxi-1102,1163,1163,1162 slots 1,2,3,4 respectively.Cable is connected to daq card to 1102 card .Micro touch screen is used on com2. Have tried other serial ports 1,5. Touch screen works fine with windows until LabView and max is installed .Video lockups,Max failures occur.MAX seems to confict with touch screen.

Max is the NI interface for all the drivers. It may be a specific driver that is causing problems, perhaps NI-VISA. I would try installing things one piece at a time. Might want to start by uninstalling everything so that you start with a clean system. First install LabVIEW with no drivers at all. See if the Micro touch screen still works. Then try installing NI-DAQ. Install each of the drivers you need one at a time. If you don't need something, leave it out.

Touch Screen unresponsive after iOS 8 update

My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

I have the same issue. iPhone 5, 1 year-old, not even a scratch.
Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
Is it really not recommended to downgrade it and have my phone funcionalities back?

IPhone 5S touch screen issues

Hi! I have a lot of issues with the touch screen of my iPhone 5S! the touch screen have areas without response! but not always the sames areas!
each picture represent the different areas without response in the touch screen! are not the same in some cases!
I´m writing from Argentina, so we don´t have apple store here to go to replace the cellphone or repair it! I could buy the whole touch screen and replace it by my self, but I don´t know if is only a problem with the touch screen or maybe an issue with the battery or other hardware components!
Sorry for my English! thank you in advance!

Hi there Psycho_ar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/TS1827
-Griff W.

IPhone 4 touch screen not working

iPhone 4 touch screen not working properly. Sometimes it activates icon itself. After updating to iOS 6.12, it stop working totally.

Good Morning S.GOPINADHAN,
I understand your iPhone screen is black and you are not able to turn it on. The article below will explain what to do when your iPhone is not responsive. I'll also include instructions on how to back up your iPhone when you are able to turn it on.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
https://support.apple.com/en-us/HT201412
iCloud: Back up your iOS device to iCloud
https://support.apple.com/kb/PH12520?locale=en_US
Regards,
- Judy

HELP: iPhone 6 Keyboard/Touch Screen Not Working

Hello.
I recently acquired to an iPhone 6, which has been working properly for the last two weeks. Today, my keyboard/touch screen stopped working properly. When I am typing in iMessage, or trying to compose an email, enter a URL, or anything else that requires my touch keyboard, my "123" button that switches to numbers, punctuation, and special characters does not open. I updated my software to iOS 8.3., which switched to a new and "improved" emoji keyboard, but I did this after my keyboard had already become unresponsive. If I click on the emjoi keyboard icon to switch over, the "ABC" button to swtich back to QWERTY is unresponsive. This is REALLY frustrating! The phone is two weeks old, and I cannot use to for a huge chunk of functionality.
It's not a dead spot on the touch screen. When I am not trying to access the keyboard, that little bottom left corner works fine to open/use my Phone app.
I really don't want to reset my phone. Any other ideas?
I made a Genius Bar appointment for next Wednesday 4/15, but that seems like an eternity from now.
Please help!

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the Touch Screen . If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

HP Spectre 13 touch screen malfunction

The touchscreen on my Ultrabook malfunctions in a seemingly random fashion.
It appears to randomly and independently trigger the touchscreen in a clearly visible vertical line about two thirds of the way across the screen.
The screen reacts as if it has been touched with a finger - but it has not.
Because these 'ghost' touches are so rapid, it completely trashes whatever I am trying to do at the time as the cursor moves to these random locations and it triggers the opening of mutliple additional webpages, changes to font sizes and screen resolution and prevents me from useing the mouse to try and close down webpages etc. The touchscreen malfunction is visible in all applications.
The only way to stop it is to press the power button until the laptop switches off.
I am not aware of a definite trigger, although at times I may have been trying to click on something with the mouse in the area where this 'flaw' appears to be located.
When I first got the laptop I thought it was some really grim virus and spent ages running and re-running scans,until I made the connection with the touch screen.
Then I wondered if it was something to do with particles or dust and spent ages cleaning the screen - but it happens when there is no visible contamination on the screen at all.
Has anyone else experience this?

Hi @Abby501
Welcome to the HP Support Forums!
I understand that you are having some trouble with your touchscreen. I am happy to assist.
It is hard to know, as yet, what the actual problem is: sensitivity, drivers, hardware, other software, etc. Please post the full product number. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
For now, you can see if you can try to adjust the touchscreen settings and see if it helps:
Press the Windows key which brings up the Start Screen
type "touch screen"
Click Settings
Select "Calibrate the screen for pen or touch input"
Select and configure as desired
Let me know if that helped.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How do I turn off the tiny Shuffle-sized iPod Nano (v6 with a touch screen) when not using its iOS?

Hello and happy new year.
I decided to use this used iPod Nano (touch screen) as an eight/8 GB flash disk/storage (FAT32). I can access the files just fine. I can always restore it back to use iOS quickly and easily if needed.
However, it never seems to turn off/sleep. I tried holding down the big button on top right (next to the two volume controls [+ and -]), but it never does anything. Also, it says "OK to disconnect." when disconnected.
So, I restored its iOS v1.2 from an old 15" MacBook Pro (2008; Mac OS X 10.5.8) onto it and can turn off easily. However, I cannot access its drive since it is not a MS FS and Windows XP Pro. SP3 asked me to format. How can I turn it off and still use it as an 8 GB USB flash disk/drive without installing and using iTunes?
Thank you in advance.

Hey,
Holding in the play/pause and the menu (select) button will force the iPod into disk mode. This is the stand by mode you are talking about.
To turn your iPod off properly you will want to hold down the play/pause button until the screen goes blank and then turn the hold switch on. This is cause the iPod to go to the Apple screen when it turns back on.
Hope this helps,
Ms D.

9800 touch screen

Similar Messages

Maybe you are looking for