9860 Bluetooth problems with car hands-free

I have a Torch 9860 that has problems with my new 2012 Hyundai Santa Fe. I can pair it with the bluetooth in the car, and it will sometimes keep the connection on the next trip, but usually I get a 'connection failed' message.
If I revert to the previous OS version, the problem goes away. I had to have the phone replaced recently, though, and the problem is back. It works great with a Jabra earpiece, but not with the car. I could do the same downgrade, but I would prefer not to.
Any ideas, please?
Thanks!
Solved!
Go to Solution.

Another user posted, and it worked for me ... go into the properties of the Bluetooth connection and disable everything except 'handsfree dialing.' You will probably then have to re-pair. You won't get streaming music, but I never use that anyway. Hyunday is supposed to be working on a fix, and gave me a rough date of the end of the month. Good luck!
Dave

Similar Messages

Bluetooth connection to car hands free

i have a motorola car hands free kit installed with my old 6230i the connection was automatic but i now have a 5500 sport this needs to be re-installed every time i get into my van does anyone know why or is the sport a H.O.S

If you try resetting your motorola car kit ( i dont know how) then pair your phone again this should work. also in your phone bluetooth settings see if you can change the motorola kit to automatically authuorise connections. It sound like the kit is still looking for your 6230i which needs to be deleted.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Bluetooth connection with my hands-free device

Hello,
Several days ago the operation system of my Q10 was updated by 10.3.1.1779 release and now I have a problem with bluetooth communication with the built-in hands-free device in my car. My contacts app alredy is not recognized, so I cannot dial numbers from my contact's list and couldn't recognize a number who is calling. Also the numbers dialed haven't been memorizing...
Could you suggest any decision?

Hi had a same problem, after upgrading to 5.0.2 on my D6633 with my Honda. I have reset the phone and as well deleted all other devices I use at home (MAP-S1, SRS-X9) plus uninstalled SongPal application that controls them and all working now. This THROW function is usless only cosing problems

Not allowing bluetooth connection to car hands free

Hi
I have a blackberry curve 8520 and a Bury hands free kit.
Normally as soon as the car is switched on the Bury comes on and starts searching for the blackberry and finds it immediately over the bluetooth and connects without any trouble.
Recently it no longer does this. Now I have to stop the Bury auto searching, turn off the blackberry bluetooth and then turn it back on for the bluetooth to connect.
If I allow for the Bury to keep searching you can see in the wireless networks screen that if briefly connects for a second and then disconnects and continues to do this.
I have restored the Bury to factory reset and it is not the Bury device because my Blackberry Pearl connects fine without any problem, it is my other phone that won't connect.
I have deleted it out of devices, played around with encryption settings and tried every setting I can see.
What is going on? why is my curve not allowing a connection to be made? I don't understand what can have happened for it to suddenly not work.
Any help would be great.
Thanks

as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

Bluetooth problem with car deck ...

I bought both myself and my wife an iPhone 4 (iOS4.1) this fall (altho mine is ~6 weeks older -- she wanted white ...<g>...), and then bought us each a Pioneer DEH-P6200BT for each of our cars. I had hers installed first, and it continues to work and connect perfectly. Mine, on the other hand, works but I need to force the connection every time I get into the car. I can either use the deck to select the device and initiated the pairing, or I can use the iPhone's bluetooth settings to request the pairing (neither involving the PIN - I just need to give each device a manual poke).
Relative to my wife's working properly, mine should as well -- it's almost as if there's a switch somewhere that I've overlooked. One difference between mine an hers however, is that I have 2 devices listed for my iPhone, a Plantronics bluetooth headset and the Pioneer deck, whereas her iPhone has only the deck. Has anyone noticed automatic pairing problems when more than one device are on the iPhone's list? Is this normal? Please advise ...
TIA & Holidays' cheerios from the Avalon Peninsula

After the ios 4.2 jailbreak today I finally solved 2 of my most annoying problems between iphone4 and the Pioneer BT200.
1) +Always had to manually initate the connection.+ If you drill down into settings, general, bluetooth, connect up the device... then KILL settings (which leaves your phone in a discoverable mode) If jailbroken you can use SBsettings to kill the process. If not jailbroken, you might get lucky by switching apps then toggling off settings in the multitask bar. This will work until you power off the phone, but many people don't bother for weeks at a time.
2)+I use a USB dock cable for ipod, pandora, app interface, but once the bluetooth connected, bluetooth AUDIO took over and killed the docked audio streams.+ A free jailbreak app called Bluetooth profiler allowed me to turn of A2DP (the streaming audio part) per device. Now the dock is free to handle all of the audio and hands free works perfectly.
I'm posting this because googling for WEEKS did not solve both of these issues. Good luck to others. It seems pointless that we need to find cobbled work arounds in 2011 for what should be basic connection options.

Bluetooth problem with car system -- HELP PLEASE!

New IPhone owner. Want to/have to use Bluetooth for hands free driving. Efforts to "pair" phone with car's system unsuccessful so far. Help would be appreciated.
Specs: IPhone 8gb purchased yesterday. Running Version 1.1.3. Vehicle is 2008 BWM X5.
Advised by BMW Bluetooth techs to try to get download of version 1.1.2 because vehicle's system may not recogize 1.1.3.
OK, how do I get 1.1.2? If I get it, will it erase 1.1.3 on IPhone? How do I speak to an Apple/Bluetooth/vehicle expert?
Thanks in advance.

Did you call Apple Care? They could at least walk you thru the sync. Mine took a few attemps to sync with my Landrover's bluetooth.

HT204387 Bluetooth problems with car sync

I did the latest update on my iphone 5. Since the update, I keep having problems while trying to listen to my audiobook via bluetooth in my car. It is "Skipping" constantly. I did not do that before. What can I do to fix that?

unfortunately theyre's not much you can do, it's a connection thing.. just try clearing some memory and simple thimgs like that

Iphone bluetooth problem with car stereo

I bought a third party bluetooth adapter for my car stereo. Hooking it up with any other device ( other mp3 players, my husband's windows phone ) all work and stream music. Pairing it with my iphone 5 causes constant crackling and static like blown speakers. Same with the ipod touch. Is there a setting in the phone that will fix this?
Thanks

I had same issue on iPhone 4 using "ebay" type adapter but improved it
with Blackberry bluetooth receiver
I however now have iPhone 5 wired in for perfect results

Bluetooth problems with car and iOS 8

Since I uploaded the new iOS 8 on my iPhone 5s I can't get the bluetooth connection working anymore in my Volvo XC60. It pairs but then it doesn't work. Can't receive calls, can't make calls. Nothing happens! It just says "Calling" and the number shows, but nothing happens. I tried also to pair my old iPhone 4 which has iOS 7.1.2 and that works great, just as my iPhone 5S did before with the iOS 7.1.2 version. So this really seems like an iOS 8 issue, unless something has happened with the bluetooth hardware in my iPhone 5S... Any ideas?

Hello,
I have an iPhone 4 and iPhone 4S under 7.1.2 and they work perfectly with my car bluetooth (Land-Rover).
I have now an iPhone 5S, that was delivered with iOS 7.1.2 and after updating in OTA mode to iOS 8, it worked fine also with my car.
BUT I preferred to make a clean install of iOS 8 on the 5S (bad idea ...), and now it does not work anymore, I can pair and connect the phone with the car, but it is impossible to send or receive a call and the car says "no signal" (for GSM network).
After resetting network preferences, the car sees the GSM network again (but impossible to send or receive a call ...), and after rebooting the phone, the car says "no signal" again (and of course no call).
I have tried to unpair, pair again, reset again network preference, but no succes.
I think that obvioulsly iOS 8 is faulty, and Apple guys, if you read me, I think it is really a pitty from Apple to deliver this OS with such bug without giving possibility to downgrade !!! (if possible, I would immediatly come back to iOS 7.1.2, waiting for the fix).
I HOPE it will be fixed quickly now !!!

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

Having trouble using my 9720 connecting to car hands free kit

Hi, i am utterly frustrated with my company blackberry 9720 phone. The trouble i am having is with the car hands free kit, my skoda superb uses the bluetooth premium and cannot use the normal hands free setting like with my Iphone. The problem i am having is firstly connecting, i can only use the bluetooth premuim, which completly changes all the setting on the phone i.e turns the network off on the phone and then a screen pops up saying running SAP mode (must use an ittenna in car?), which in turn stops emails from coming in, i can stupidly write texts messages on my dash board and receive them and read them on my dash board while driving. So when i remove the keys from the ignition the phone does not put the phone back to its normal working settings, it keeps the network switched off i have to go to settings and turn the network on. Thirdly when i turn the car on the phone will not connect automatically it says cannot connect to mobile, but if i switch the phone off and on it automatically connects, but if by the grace of god it does connect an second time the phone crashes and resets and then connects five minutes later after reseting. forthly this is not an phone issue it is definatly software as i have been given an second 9720 and the fault is present on both phones.
can anyone help

as I believe it a car bluetooth hands free can only be paired to one device . ie if you wish to pair with another device you would have to reset back to default and search again.... so does the cuve work if you reset the bury and pair again but then your other phone does not work with it ... this is logical as if we drove down a motorway we would pick up loadsa phones.... therefor we can only pair to one device

HT204387 how to use synched phone in a car hands free

Hi,
I can't use my 4S phone in my car hands free, it is synched but when I actually talk on phone I have to use the phone in my ear, somehow my setting is changed and I can't get to use the phone hands free, the bluetooth is on, don't know what else to to.

That would be interesting to see an app that's able to do all this and be able to have a keypad to dial a number. Alot of consumers see the iPad as a replacement stereo, if you really look at the features and price between haveing a high-end double din stereo with GPS vs. an iPad/Mini. The high-end stereo w/gps,bluetooth,usb for media storage and all the bells & whistles will cost you well over $1000; As for the iPad.... the iPad already does most of the features that a car stereo can do and alot more, with the exeption of not being able to make a bluetooth calls, but with a price well under $1000 depending on storage space. I have seen that the iPad,& iPad mini has made an impact in the caraudio scene ever since the very first iPad was released. If seeing is believing.... I would suggest to do a search on the web and youtube "ipad in car".

Help 5800 bluetooth problem with tomtom & vauxhall...

my 5800 wont auto connect to my tom tom i have to connect manually any ideas ????
also i cant down load my phone book or see any call list in my car ( 2008 vauxhall zafira (uhp) factory fitted hands free ) please help

did you authorize your tomtom in the bluetooth settings for automatic connection?
My dad also drives the zafira with the hands free and i can tell you phonebook downloading is only supported via cable-connection (cradle).
But my carkit installer says its a normal thing with opel/vauxhall handsfree

HT204387 Can't find my car hands-free kit

Hi, With iphone 5 I can't find my cars hands-free kit when searching bloutooth, but I can find it and pair it easily with my iPhone 3GS. My car is Cadillac SRX 2012

Try unpairing the iPhone 3GS from your Cadillac, then try pairing the iPhone 5 again.
You can find more troubleshooting info in this Apple doc -> iOS: Troubleshooting car stereo connections
Also, iOS 6 uses AVRCP 1.4 so you may need to update the reciever in the car to make it compatible with with all versions of ACRCP.

Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?

Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav? I don't care about the HondaLink- just the hands free phone call/receive.

My 5 starting doing this today....constant rebooting and or shutting off even after restoring to new phone. Would love some impu!!

9860 Bluetooth problems with car hands-free

Similar Messages

Maybe you are looking for