9860 tourch the media is not supported suddenly

The BB having the problem with media, device memory as well as media card is not supporting when load something in the phone exmple snapping, music, video, etc. Also exsting data not showing. pl. hepl me out from this issue. rupesh

Hi and Welcome to the Community!
Anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Good luck!

Similar Messages

I cannot get a dvd to play. The error message says "media type not supported". I think it is a .m2ts. Any idea on how I can get it to play?

I cannot get a dvd to play on my computer. The error message says in iDVD is "media type not supported".
The DVD was produced with a video camera and is in HD format. I think the the format is .m2ts?
Any ideas on how to get this to play?

Check out > Mac App Store - Free MTS M2TS Converter
and/or others at > playing .m2ts format in OS X - Google Search

Hp the system recovery media does not support this computer, WIN7 GS72 Notebook

HProduct: GS-B66US (17" I3 notebook)
OS: Win7
Bios Rev: F.47
Error message: "hp the system recovery media does not support this computer. You are not able to restore this system"
Changes made to system: Updated bios (I think).
Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios). After booting from the first recovery disk I get the following message
"hp the system recovery media does not support this computer. You are not able to restore this system with the media"
The computer still boots with the old hard drive (with drive failure imminent messages) I do see support assistant offering another bios update but I did not install it with the hard drive problem
PLEASE HELP
TIA

Hi,
I think there could be two possible reason. wrong media or systemboard is changed.
did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
media created on some other computer (same model) may not work on your computer.
you can order the media from hp.com here.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
hope it helps
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (.m4v). I have not touched the file in any way (no trimming, clipping or other editing)

I get the error message in QuickTime "operation stopped the operation is not supported for this media" most times when I try and export an .AVI file as something else (e.g. .m4v). I have not touched the file in any way (no trimming, clipping or other editing), all I want QuickTime to do is export the file in a compressed format. Bizzarely, if I shutdown and open QuickTime many times I can occasionally export a clip as another format (maybe one in 10 times). I have seen that other users have had a similar problem after clipping files in QuickTime but this seems to be a slightly different bug in that all I do is open the file and then try and export the file as is - either way, this is a very annoying bug

@Z_B-B, thank you for taking the time to respond to my cry for help. However, the link you supplied does not address the problem: I am not trying to export from Final Cut Pro to QuickTime, I am trying to export from QuickTime to the rest of the world (like people's iPhones and Ipads) in .m4v format (so I am not emailing my freinds such huge files).
If I were to spend hundreds of Dollars on a copy of Final Pro I could export directly from there and not have to bother with QuickTime, but I do not take enough video clips to justify the cost. I must say that I never had any of these problems before I decided to switch from Snow Leopard to Mountai Lion.

Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file

Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file
How do I fix this?

That would probably be a question best taken up in on a site for Windows support questions. Not knowing anything about the movie you're trying to play, all I can suggest is to confirm that the format of the movie you wish to play is supported in your version of WMP. If it isn't, you'll either need to convert the movie or use some other player software.
Regards.

System Recovery media does not support the computer. HELP!!!

Ok problem here the recovery discs that were created do not work. And this is where I'm stuck.
First the details. It's a DV7-6163CL Laptop with windows 7. The discs were created shortly after we got the computer. The reason we have to try and recover the computer is hard drive #1 failed and failed hard. Hard drive was replaced. Now after trying to use the recovery discs we get the error message after a few windows loading screens in Recovery Manger.
"The system recovery media does not support this computer. You are not able to restore this computer with the media."
Well Hp doesn't support his platform anymore due to its age.
Is there anything I can do next to formatting the computer and getting a new OS?

Many times this error is caused by missing info in BIOS. Can you enter BIOS-F10 at power on- and check for serial number,etc?
Sometimes a new hdd requires prepping with Cyberlink Utility cd first. Download and Save the file. Once download is complete, put a blank cd in your drive and click the file to create a boot cd. Boot with this cd and wait until you get a green check mark indicating hdd is ready. Remove the cd , insert first Recovery Disk and restart the laptop.
http://ftp.hp.com/pub/softlib/software11/COL32372/pv-80183-1/sp44645.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

WhatsApp Media/App not supported n8 Anna

Hello,
I upgraded to the latest version of WhatsApp (which is AWESOME)
But when I go to share a link and choose WhatsApp I get this error:
WhatsApp Media/App not supported
I emailed their support and they said get the latest version - which I did. But the error still appears.
Anyone else getting this?
Any solutions?
Thanks,
V
Nokia 3395
Nokia 6600
Nokia N95 8GB
Nokia N8 (Anna)
Nokia Lumia 930

Hi VeePee,
Thanks for your post.
Please uninstall and reinstall the app. If issue persists, i advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345. If the issue still persists, perform a hard reset. First of all, back up your data using Nokia Suite (Tools > Back up). Once your data is fully backed up, type *#7370# on the keypad.
Alternatively, you may also check for updates on Nokia Suite (by going to Tools > Updates). If no new update is available for your device, reinstall the current version.
For further support, please contact the developer again:
http://www.whatsapp.com/faq/ | [email protected]
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Getting the message ' The sim is not supported" onFactory Unlock Activation

My friend bought Iphone 4 from Apple store canada as factory unlock and pay the full price but during activation its giving me an error as The Sim is not supported contact your carrier..... " is this because the set is Locked or there may be chance that my micro sim is not trimmed properly ...??? Plz HELPP im worried paid so much amount and yet its not working....What should i Do ?????

Can i return the phone after 60 days of purchase as the friend who brought this from canada is going back after a month and its already a month he had purchased it..as i believe that the Iphone has 1 year warranty...Plz correct me if i am wrong...And also please tell me if he had lost the reciept..is there any way he can still return it and get the new one...???

My iPod Classic is not syncing to my Mac. When I plug it in, it tells me the servers do not support it or something along those lines. It is an iPod Classic 8g, and I bought it used for 30. Any help????

Today I bought an iPod Classic 8gb for 30 quid. When I bought it (used) of of a friends, it played music fine, I could listen to it, and it worked ok. So I go home to reset it so I can put my account on it, and sync it with all my music I have (I want to use it when I hit the gym instead of using my iPhone), but when I plugges it in and restored it, it finished the restoration but NOW it wont let me sync all of my stuff on to it, and the iPod is completely black. I restored it to Factory settings, it shouldnt be doing this???? When I plug it in , I get an error that says
"The iPod software update server could not be contacted. The server does not support this version of iTunes."
Makes me pretty ticked off, like honestly how ******* old is this ******* iPod???
Im also running version 10.9 on my MacBook Pro
Picture: http://imgur.com/nTeiJzO

Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

The Organizer does not support the color space in the file

I just purchased and installed PSE 8 as an upgrade to PSE 6. My catalog correctly shows all of my existing images. However, when I try to import photos into the Organizer, I get a message that nothing was imported. The reason given is that "The Organizer does not support the color space in the file." This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS. Any suggestions?
Here is my system information:
Elements Organizer 8.0.0.0
Core Version: 8.0 (20090905.r.605812)
Language Version: 8.0 (20090905.r.605812)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
Catalog Size: 83.9MB
Catalog Cache Size: 459.8MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 2GB
Free Memory: 829MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.65
Adobe Reader Version: 9.2
Adobe Acrobat Version: Not installed
CD and DVD drives:
J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Encore CS5: The software that's used to decode the media is not available on this system...

Hi guys, I am needing assistance with this matter. I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something. Can anyboy please assist me?
Here's the background:
OS: Windows 7 64-bit.
Video footage format: AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4).
Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore. The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link. (This is the way I have been operating countless times in CS4. However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again.
So I tried the other way around. I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice. This time around, i don't get a crash out of Encore, instead I get the following message:
"The software that's used to decode the media is not available on this system.
Installing the correct decoders for the files you are working with may help to correct the problem."
So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009). I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up. Can anybody help?
Many Thanks,
Matt

I am having the same problem however I end up having hardware error "Sense code 52102"
My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
I have wasted over 20 DVD's trying different things.
OS: Windows 7 64-bit.
Video footage format: HD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

Creation of a refurbishment order from the notification is not supported

Hello All,
I would like to know whether we can create Refurbishment Order directly from Refurbish. Request Notification.
Currently when trying to do that I'm getting error message saying that 'Creation of a refurbishment order from the notification is not supported'.
SAP doesn't support that kind of scenario or I'm missing some configuration?
Thanks in advance
G.

Hello again,
Thanks for your answer but I would like to get some more clarification.
What I would like to do is create Refurbishment Order from the notification directly by clicking create button which seats just next to order field or from the menu Notification -> Create -> Direct.
I'm getting pop up window where Order Type is filled in automatically because of the config I made. Then I just fill in Main Work Center field and hit continue. Afterwards message 'Creation of a refurbishment order from the notification is not supported' appears.
Can you confirm that above described scenario is not supported by SAP.
Thanks in advance.
G.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

After my friend locked me out of my iPhone with too many wrong passwords I restored my iPhone and now it is showing that picture of a cable leading towards itunes and itunes says the sim is not supported but it is the original sim. How do I fix this?

After my friend locked me out of my iPhone with too many wrong password attempts I restored my iPhone via recovery mode and now it is showing that picture of a cable leading towards itunes, and itunes says the sim is not supported but it is the original sim. How do I fix this?

Something went wrong with the update, this can and does happen with every version of iOS.
There is nothing wrong with the update.
Simply restore the device via iTunes on the computer.
If iTunes is stating it will take hours to update, that indicates an extremely slow Internet connection and is likely the reason the OTA update failed.

9860 tourch the media is not supported suddenly

Similar Messages

Maybe you are looking for