99 slides on the wall

So - I created my first DVD on iDVD which included a nice slideshow, movies, etc. When I watched it in my DVD player - the slideshow portion has one small issue. There are about 500 slides in the show, and every time the counter on my DVD player reaches 99 - the music pauses, the slide jogs,then continues on. Is there any way to correct this?

Welcome to the Apple Discussions. You can minimize the pause by using top grade media, Verbatim, Taiyo Yuden or Maxell -R are the most recommended brands in this forum, and burning at the slowest speed possible. Still, as Glo H mentioned, it will occur and some players will be more affected than others. To me it appears like the pause I get in commercial movie DVDs when it changes from one layer to another. Noticeable but not objectionable.
If you want to create the slideshow in another application and want greater control over the added audio use iMovie HD 6. It's been made available to iLife 08 users and gives you total control:
Click to view full size
Or if you want to add some pizzaz to the slideshow you could use PhotoPresenter which has over 25 animated themes like these examples in this demo page. I've used the Apple TV Intro theme to create a brief intro clip that I added to iMovie HD. Worked very nicely.
OT

Similar Messages

  • I want the projected image on the wall to just be the full screen of the slide

    when I plug my mac air into my projector, Keynote display on the wall has Current slide: 1 of 85.  How do i make this go away on the projected image?  This also decreases the size of the image on the wall.  It's not full screen on the wall.

    You may have your primary and secondary displays swapped since what you are seeing on the wall is the Presenter's View which would normally be the one visible to you on your MacBook Air.
    Check your Keynote Preferences Slideshow Settings. At the bottom of the settings list are options to switch the displays.
    Also, some MacBooks have a Function Key that allows the displays to be swapped from the keyboard; on my MacBook Pro it is F7, but that may differ between models. Look for a Function Key with two overlapping rectangles. It is a toggle key for displays.
    Good Luck.

  • Why does my iPhone not charge with the wall charger?

    i have recently purchased an iphone 4 (within the last month). it has charged via the wall charger at first but now, the wall charger does not work. it does charge by connecting the USB cable to my computer. is there any way i can get my wall charger working? or will i have to get a new one? thanks.

    Try a different wall socket - if you haven't already and/or try this.... reset the iPad
    Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears - ignore the red slider - let go of the buttons. then try again.
    You could also try updating your software as I have no idea which version you are running on your iPad.
    Message was edited by: Demo

  • We cannot get our Ipad Air to charge.  We have tried the wall plug and the computer plug in.  It just gives us a message saying it's not charging.

    We cannot get our iPad Air to charge.  We have tried the wall plug and the computer plug in.  It just gives a message saying it's not charging.

    Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • The part of the power cable between the converter and the wall

    I just bought a new MacBook in Malaysia... it has the big three pronged UK wall plug, both the little one (that makes you stay close to the wall), and the long cord one.
    It also came with a US plug, but only the little, short one that just slides right on and makes you stay close to the wall or the outlet, not one with a cord.
    I am going back to the US and want more distance and was wondering if I could use my old iBook cord... only the part between the converter and the wall, so that I can have a longer reach. I have looked and looked at wattage and voltage and can't tell if that will matter on this part. It doesnt' seem like it should, because it is before the conversion to the right voltage and wattage, but I don't want to plug in and explode anything.
    Thanks so much.

    The iBook cord should work fine. There are no electronics in the tail piece of the cord, as it's just a wire, so there is no problem using them. Also, apple wouldn't allow the plugs to plugin if they weren't compatible.
    As a side note, I keep that cord from my deceased iBook plugged in at my lab so I can easily plug my laptop in there and at home. The two plugs are identical.
    Phil

  • How do I connect my Time Capsule directly to the internet cable from the wall?

    My Time Capsule only works if I connect it to my wireless router with a LAN cable. But, when I plug the cable from the wall directly into the Time Capsule, it just blinks orange. What am I not doing right?

    There is no modem in the TC.. you need a modem.. your wireless router is actually a modem router.. not just a modem.. so it could be replaced with a straight modem.. sometimes.. it can be bridged .. sometimes..
    But you still haven't told us enough.. what broadband do you have?
    What model is the existing modem router? How does it authenticate to the ISP?
    Once we know those things we can suggest further options.

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • Connecting the coax cable (from the wall) to my tv instead of box?

    I was told this:
    Though I though in order for the set top box to work you need the coax plugged into the box?
    Please wait for a Samsung Agent to respond.
    Please wait for a Samsung Agent to respond.
    You are now chatting with 'Danice'. There will be a brief survey at the end of our chat to share feedback on my performance today.
    {edited for privacy}
    Danice: Hi, thank you for reaching out to Samsung technical support. How may I assist you?
    David: Hi the UN40F6400AFXZA tv how do I use the tv function? I have the HDMI cable in the tv to the set top box but when I hit the tv option on source using my remote all I get is "white snow"?
    Danice: I would be happy to assist you with the instructions to change the source on the TV.
    Danice: What are the devices connected to the TV?
    David: no I think you mis understand me.
    David: Hi the UN40F6400AFXZA tv how do I use the tv function? I have the HDMI cable in the tv to the set top box but when I hit the tv option on source using my remote all I get is "white snow"?
    David: am I talking to a robot or a real person?
    Danice: I am sorry for the confusion.
    Danice: You are chatting with a Live Person.
    Danice: I would be happy to assist you with the information about the TV source on the TV.
    David: ok
    Danice: The TV source on the TV is nothing but the cable from the wall or antenna connected to the coaxial port on the TV.
    Danice: You should connect an antenna or cable from the wall to this port and perform the auto programming through Menu options to get the display.
    David: oh the cable from the wall goes to the cable box though?
    Danice: No, this port is only for the cable from the wall directly to the coaxial port on the TV.
    David: I'm confused cause my cable provider says the cable from the wall goes into the coax on the set top box? So how would the set top box work without the coax plugged in?
    Danice: I will clarify that for you.
    Danice: The Coaxial port on the TV will work only for the air channels like Antenna or cable from the wall and this is not applicable for the cable by the service provider you are referring to.
    David: ok
    David: also my other question is UN40F6400AFXZA dose it support Audio Return HDMI?
    Danice: I will check that for you.
    Danice: Yes, the HDMI 2 is the ARC port on the TV.
    David: awesome how do I set it up?
    Danice: Yes, follow the instructions mentioned in the link below to use the ARC feature:
    Danice: http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx=469179&modelname=UN4...
    Danice: Are you able to access the link?
    David: yes thank you

    The Verizon signal is delivered via coas to the set-top box which allows you to get all of the channels you subscribe to.  You then hook the STB your TV (recommended via HDMI in your case since you have an HD set with HDMI inputs).  The coax signal must be supplied to both your STB and your router. 
    If you plug your coax directly into you TV and do a channel scan, you will only recieve local channels (and a couple of others) because all other channels are encrypted and require an STB (or a cable card with an appropriate device) to decode.

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How can I pause a slide until the user clicks a button?

    I wish to pause a slide until the user clicks a button (which I've created out of a Smartshape). The thing is that I haven't added a click box object over the smartshape but have only set the smartshape properties to "Use as Button". If I were to add a clickbox object, I would get a "Pause project until user clicks" in the options section of the properties. However in using a smartshape as a button, I cannot find this option. I am using Captivate 6. Seems strange as I would have expected to see the same checkbox option even if I were to use a smartshape as a button but I dont. Can't someone help me and let me know if I'm missing something.
    Of course I could use a clickbox over my smartshape to achieve what I want, but I want to avoid thsi for two reason:
    I want to avoid adding another object when I dont need it.
    My smartshape is a right arrow (indicating "Begin"), and I dont want a squarish click box sitting on top of a triangle because that just shows the hand pointer even if the cursor isn't exactly over the arrow button because it enter the clickbox area.
    Thanks,
    Sean

    Select the Smart Shape button , go to Properties > Timing accordion > Pause After and set the number of seconds from the beginning of the slide for it to pause.

  • On the Wall Street Journal website, I am not able to print out of the print format. Never had a problem before with this.

    I click on the print icon under an article in the Wall Street Journal. A new window opens with the article in print format. When I print, I get blank paginated pages equaling the length of the article. On the top left hand corner of the page will appear the title of the article; on the top right hand corner will appear the web address of the article; on the bottom left hand corner will appear the pagination; and on the bottom right hand corner will be the date and time of the printing. This is just how any article would print; the only difference being that I'm not getting the content of the article printed.
    This has only started a couple of days ago. I do not have this issue with any other publication, yet this problem doesn't exist with other browsers.

    I don't have a WSJ account to test... Here is some general advice:
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    orange Firefox button (or Tools menu) > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    This will open a window listing the site's cookies, which you can remove individually.
    Then try reloading the page and logging back in. Does that help?

  • Ipod Touch 3rd gen not chargin anywhere else that it isn't my macbook pro and only works on one of the USB ports the other one doesnt recognize it... I use the same USB cord to charge it on the wall for some time now it wont even charge on the wall

    i have an ipod touch 3rd gen this is my second ipod touch my fist one the battery died after 4 years so then a bought this one (ipod touch 3gen) and it works perfectlybut for some time know it wont charge anywhere else thats not my macbook pro and the thing is the only charges and its recognized only on one of the USB porst of the laptop i have a windows 7 computer but it wont charge there have a linux (ubuntu) machine and doesnt work either, the wall charger with the same cable i use on the laptop and wont charge either i plug it on my sisters car and wont charge my char wont charge anyways i wont charge anywhere else thats not my macbook pro only with 1 of the 2 USB pork that the MBP has..... any help? can someone ewlp me? i really doubt its the battery cause it charges fine on my MBP :/.... oh now i recently upgrade to OSX Lioin but the problem perssist I did the recent update but the problem persists :/

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • Why does the Amount slider on the Detail Panel reset to 0 when saving the file as a Smart Object?

    Whenever I open a Smart Object PSD file to adjust previous settings in RAW, I have noticed that the Amount slider in the Detail panel has reset to 0. Does this reduce the files sharpening? Is this a normal behavior? Can this be prevented?
    I use a Mac running 10.6.8 and Photoshop CS6, version 13.0.5 x 64.

    This behavior happens only on Mac desktop computer, not on my Mac laptop running the same CS6.
    After I've edited an ACR file (including sharpening in the Detail panel), I change the file into a PSD Smart Object to complete my edit by clicking on "Open Object". I immediately notice this PSD file is not sharp. If I click on the bottom right of the image icon to return to the RAW file, I find the Amount slider in the Detail Panel has changed from the sharpening amount I gave it, to 0.
    If I do the exact same thing on my laptop (running a duplicate of the same Photoshop CS6), this behaviour does not happen. The image remains sharp as a PSD file, and if I check by returning to ACR, the Amount slider has maintained its setting.
    Anything more you need?

  • HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

    My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

    Update: It seems as though the phone will charge if I plug it in and then turn it off.  It will not charge while the phone is on.  Also iTunes will not recognize it, so I can't sync or anything.  I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

  • I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

    I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?  I edit the presentation depending on the audience to which I am presenting.

    If you add a new  slide with just a text box (therefore a very small amount of data),  to an existing presentation then save,  Keynote will only save the new content to the file,  it wont save  pre-existing content as its already included in the file.
    The time  taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

Maybe you are looking for