990 FXA GD 65 VRM Temp and load voltage problem

Hi sorry my bad english
I have 990 fxa gd 65 and Fx 8320 cpu my motherboard is VRM heat and voltage under load has dropped ı use occt test program and 1.4 voltage 4.2 ghz 1 gives an error in the minutes I see that the voltage drop and the heat from the VRM s.VRMs the default settings Astor exceeds 90 degrees of stress tests
How can I solve it?
Bios verion photo:http://i.hizliresim.com/n7ozEB.jpg

What are the ambient temperatures in your room? How many case fans does you case have? What kind of CPU cooler are you using?
More air flow in the case = cooler running components.

Similar Messages

Numbers Import and Load Performance Problems

Some initial results of converting a single 1.9MB Excel spreadsheet to Numbers:
_Results using Numbers v1.0_
Import 1.9MB Excel spreadsheet into Numbers: 7 minutes 3.5 seconds
Load (saved) Numbers spreadsheet (2.4MB): 5 minutes 11.7 seconds
_Results using Numbers v1.0.1_
Import 1.9MB Excel spreadsheet into Numbers: 6 minutes 36.1 seconds
Load (saved) Numbers spreadsheet (2.4MB): 5 minutes 5.8 seconds
_Comparison to Excel_
Excel loads the original 1.9MB spreadsheet in 4.2 seconds.
Summary
Numbers v1.0 and v1.0.1 exhibit severe performance problems with loading (of it's own files) and importing of Excel V.x files.

Hello
It seems that you missed a detail.
When a Numbers document is 1.9MB on disk, it may be a 7 or 8 MB file to load.
A Numbers document s not a file but a package which is a disguised folder.
The document itself is described in an WML extremely verbose file stored in a gzip archive.
Opening such a document starts with an unpack sequence which is a fast one (except maybe if the space available on the support is short).
The unpacked file may easily be 10 times larger than the packed one.
Just an example, the xml.gz file containing the report of my bank operations for 2007 is a 300Kb one but the expanded one, the one which Numers must read, is a 4 MB one, yes 13,3 times the original.
And, loading it is not sufficient, this huge file must be "interpreted" to build the display.
As it is very long, Apple treats it as the TRUE description of the document and so, each time it must display something, it must work as the interpreters that old users like me knew when they used the Basic available in Apple // machines.
Addind a supplemetary stage would have add time to the opening sequence but would have fasten the usage of the document.
Of course, it would also had added a supplementary stage duringthe save it process.
I hope that they will adopt this scheme but of course I don't know if they will do that.
Of course, the problem is quite the same when we import a document from Excel or from AppleWorks.
The app reads the original which is stored in a compact shape then it deciphers it to create the XML code. Optimisation would perhaps reduce a bit these tasks but it will continue to be a time consuming one.
Yvan KOENIG (from FRANCE dimanche 27 janvier 2008 16:46:12)

MBP Fan Speed/Temp and one extra problem.

My 17" MBP fan is almost constantly running at the max speed (6000 rpm). The temp is at 75 C as well. Since i'm in school the loud fan speed it very annoying and I would like to know if I have a problem with either my temp sensors, logic board or fans.
My other problem is that I get two error messages saying that a usb port is drawing too much power and will be deactivated. I have 3 usb ports my two left ones do not work and only my right one functions.
Any help would be great.
~ Justin

One thing to do is to run the extended version of the Apple Hardware Test and see if anything shows up in the form of an error code. If you get an error code with "SNS" in it, that would indicate that a thermal sensor is either not working or possibly not plugged in. If a sensor is not working, the fans will run all out by default.
Another thing to check is Activity Monitor for an out of control process which is hogging the CPU. Open Activity Monitor and select "All Processes" at the top and "CPU" on the bottom bar. Then peruse the CPU column for any process hat is running amok. If you find one, then highlight it and quit it and see if that takes care of the problem. Sometimes a printer process will hang up and hog the CPU, but it could actually be almost anything.
Regarding the USB ports, you can try to reset them. Power down and remove both the power adaptor and the battery for 15-20 minutes. Then power up again and see if they work. If your USB devices are drawing too much power from your USB ports, you may want to try a powered USB hub.
Good luck!

Remove all duplicate records and load into temp table

Hi
I have a table contains data like this.
Emp No Designation location
1111 SE CA
1111 DE CT
3456 WE NJ
4523 TY GH
We found that there are two duplicate records for emp no: 1111. I want to delete all duplicate records (in this case two records for emp no:1111) and load into the temp table.
Please advice me how to do it.

Oh look, you can search the forums...
http://forums.oracle.com/forums/search.jspa?threadID=&q=delete+duplicates&objID=f75&dateRange=all&userID=&numResults=30

990 fxa-gd65 and nvidia gtx support?

Hi all,
I just got the last of the parts for my new build and it should be bamf'n . Anyway, I spent the last two days tracking down the b2 error code. So I swapped out the Galaxy GTX 760 gpu with my old Radeon (I don't remember what it is but it's in the system now so I can't read it...) and low and behold, the system boots and i've got Window's installed and Fedora on the way.
Anyway, My question is this, Tiger Direct has already exchanged the Galaxy GTX 760 for another galaxy GTX 760 but that presented the same issue. I'm unfamiliar with MSI's resources and therefore I must ask: Are there any known issues with the 990 fxa-gd65 and NVidia cards? GTX cards? Galaxy Cards?
Would I be better off exchanging this video card for a amd or another geforce?...
The only other thing I can figure it *might* be is that the psu doesn't supply enough power for that beastly graphics card...
I'm at a loss here. I've never heard of any issue this specific to compatibility to two pieces of Hardware and this isn't my first Rodeo.
Here's the Hardware I have in there:
AMD Unlocked 8 Core 4.0 GHz with water cooing unit
990 fxa-gd65 Mobo
Thermaltake Smart M750W PSU
Galaxy GTX 760 (does not work)
2x8GB HyperX 1600MHz RAM
Toshiba 2TB 7200 RPM HDD
Thermaltake Chaser MK-I

Quote from: flobelix on 10-July-13, 03:00:02
You had various GTX760 that won't work so seems to have something to do with the rest of the system... Just try it else you will never know.
I disagree. The card seems to be the issue because it is the only thing that we swapped out that resolved the issue. While I agree that this is a good next step, it occurs to me that if a different card would also resolve the issue I would be willing to accept that path to resolution instead of taking the intermediary step of updating the bios. (which to be honest is not a very mature solution on MSI's part considering the board has no integrated graphics. So therefor if this is MSI's official stance on the issue then what you're asking of you customers that are builbing new systems is that they have another card on hand to update the bios with before installing the gtx card. That may not be much for veteran system builders like me, but many people that are building their first system or even those whos graphics have died or had integrated graphics on their last system, will get hit by this.) I say all this not to be confrontational just to point out the catch 22 that MSI is putting it's customers in.
What I want to know is if we can be sure enough that this is going to resolve the issue that I can be assured that when I get off work and home and try this (after tiger direct closes) I won't have to wait until tomorrow to go return the part.
Basically, if you're sure then that's good enough for me.
Also, on your link I do not see windows 8 support for the driver. This does work in Windows 8 correct?

Multiple Convert/Dump and Load tasks in a single SSIS package?

I'd appreciate some input. We have a single data file that has about 1,000,000 rows of data spanning 28 time periods in the columns across each row. The file is too large to import at one time, and so we have created 9 different transformation files to pull subsets of the timeperiods using MVAL. The end user does not want to have to break apart the file and/or schedule 9 separate imports to bring this file in each time. So, I've attempted to create a single SSIS package that runs each of the 9 required component imports, but I'm running into the following error any time that I try to run more than one import at once:
An error occurred while running a packageException of type 'System.OutOfMemoryException' was thrown.
I've tried using a ForEach loop to simply loop through each of the transformation files and run an import for each transformation file it finds. But, I understand that SSIS doesn't release memory until the end of the ForEach loop, which would explain an out of memory issue. I then broke it out and specified 9 distinct Convert task and 9 distinct Dump and Load tasks in the package with an order of Convert 1 --> Dump and Load 1 --> Convert 2 --> Dump and Load 2, etc. This results in the same out of memory issue any time I enable it to run more than 1 convert/dump & load task in the package - they are not running simultaneously, but rather sequentially. I don't understand this. In looking at the logs, it looks like it's creating the temp files for the first import and adding them into BPC, and then creating the temp files for the second import but then fails prior to the second load. This will work for a smaller data file, but shouldn't the memory be released after the task and allow subsequent tasks to complete? Any recommendations on how to address this and automate this load?

Quick update - I created unique ssis packages for the distinct imports and called those packages from within the initial package that is kicked off through Data Manager, and I ran into the same out of memory issue. Any ideas, suggestions, or help would be greatly appreciated.
Thanks!
Josh

Why does my Mac Mini running on Mavericks so slow to start and load apps?

Why does my Mac Mini running on Mavericks take so long to start and load apps?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

5850 max VRM temps?

Basically what the title says. Ive heard varying opinions on what the safe max temps are for the VRM.
I hit 1000MHz on the core and it's perfectly stable in GPUTool.
But when I run Furmak even though the core temp never gets above 72-73, VRM temps get up to 85C after a couple minutes. This is with the fan @ 100% so I shut it down.
I actually have some aftermarket cooling on the way but I still need this info.
TIA...

Quote from: torquejunky on 20-March-10, 01:29:12
I guess that would help huh?
It's a MSI R5850 OC edition.
R5850-PM2D1G-OC
Yep, do you have a good ventilation inside your PC case?
test VGA with MSI Kombustor http://event.msi.com/vga/afterburner/images/MSIAfterburnerSetup151.zip
See if the system is stable and check VGA temp reported

CPU Temp Idle/Load Difference

need a few second opinions here. below are my cpu temps (using speedfan, MBM5, and prime95):
w/o CnQ:
idle: 35-37
load: 50-52
with CnQ, w/o SmartFan:
idle: 35
load: 53-54
with CnQ & SmartFan (target 40%, tolerance 5):
idle: 31-32
load: 51-52
as you can see the only difference CnQ has made is in my idle temp, which seems pretty good to me, and is actually in the lower range of most of the quotes i have read on here. my question is, should my temp on load be as high as it is? that's a 20 degree difference, and it usually shoots up to the high 40s within a matter of 3-4 seconds and thankfully doesn't go TOO much further. should the difference between idle/temp really be so great? i would have expected my load temp to be a little less than that, maybe the high-40s, maybe even the mid-40s. there's no overclocking here, folks. not a whole lot of tweaking going on.
i've checked to make sure CnQ is functioning correctly, all signs point to yes. i made sure i applied a correct amount of AS5 - i read enough stories about people applying too much so i kept that in mind when using it. i can't imagine that i may have still needed even less than that. besides, my idle temp would have been way higher if i had misapplied, right? my only problem is with the load temps. i've tried several of the recent bios revisions but disappointingly i see very little difference if any in temps i am getting through bios or speedfan. besides, my bios usually reads 41-44 degrees (that should be idle right?) so i don't even pay attention to it.
is my load temp something to be worried about? if not, is it something that could be improved upon? should i get some kind of temp sensor and give it a manual test that way? not sure how to go about doing that or where to pick up a temp sensor. also, my NB/sys temp is usually hovering in the low-mid 40s but that's because i never thought to get a chipset cooler, which i have subsequently ordered from compUSA (i hear compUSA's FMI chipset cooler is recommended). could taking down the chipset temp a few degrees affect the CPU temp by chance? are there some other BIOS switches i should check out and experiment with? i am not a newbie to computers generally, but i AM more of a newbie tweak-wise.
with the purchase of my new system, my first one put together from scratch (and hey, everything's working fine so i must've done a decent-enough job right?), i have really had to take some crash courses in BIOS issues, upgrading, the whole CPU fan and thermale compound market, which i never even knew existed. my previous system is a 400mhz p2 so you can imagine i pretty much had to get an update on the entire industry as it stands to know what i was doing! hey, i even got a BIOS savior to shield me against corruption, etc. nifty little piece of tech stuff.
all suggestions and recommendations would be greatly appreciated. i would optimally like to get my load temp down to mid/high 40s range. perhaps i'm expecting too much here?
thanks,
kevin

The short answer is that cnq will not affect your load temps, since when loaded, it is effectively running exactly as it would without CNQ.
Yes, the temp will "shoot up" more when you go from non-loaded to loaded with CNQ, simply because it is starting from a lower temp to begin with.
You will learn not to trust corecenter readings eventually - they are by no means guaranteed accurate.
If you put your finger on your cpu heatsink when under load - if it's fairly warm, that's ok - if you can't hold it there for 10 seconds without burning, it's too hot.
Edit: I see you were using speedfan - same comment about accuracy applies.

CPU Temp and Fan Speed

Hi
According to SMC Fan Control and iStat my CPU is running at 74C currently and often 90C under light load with associated fan speed of 6200 rpm. I have checked activity monitor and very little load on CPU jsut safari and Activity Monitor have any significant usage ( 10% ish). Is this a 'normal' CPU temp and if not are there any ways to check cooling or in crease cooling, ultimately to keep the fan low and noise down,battery life up??
many thanks

thanks for the response.
'All processes' is selected - showing 50-70% CPU idle. MacBook has good ventilation, sitting on a hard table. I upgraded the HD a while ago, to a 7200 rpm 320GB unit, would this make a difference?

HELP - Temp and Fan speed (3500???) questions

I have 3 questions:
1) What should be the "normal" CPU temps (idle and loaded), lets say for room temp around 25 C and a normal case, with 1 fan
2) Can I trust the temperature readings of the mailboard (in Windows)
3) What should be the normal CPU fan speed, with all Cooln'quiet features off?
Thanks! Help!

Quote
Originally posted by ppeccin
I have 3 questions:
1) What should be the "normal" CPU temps (idle and loaded), lets say for room temp around 25 C and a normal case, with 1 fan
2) Can I trust the temperature readings of the mailboard (in Windows)
3) What should be the normal CPU fan speed, with all Cooln'quiet features off?
Thanks! Help!
1) around 40-55 for load and 28-45 for idle
2) sometimes, about 70-80 per cent is accurate
3) about 1000-2000rpm

I am using FCP 7.0.3.on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

I am using FCP 7.0.3 on my Mac Pro. I bought a new mac book pro and loaded the software on to the lap top but the software is 6.0.3. How do i get the update to the lap top?

.. and by the way, the jump from FCP 6.0.3 to FCP 7.0 (or higher) isn't an "update" It's a full version "upgrade" that has to be done using the install discs (or disc images).
-DH

Hi, I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while." I rebooted and it didn't fix the problem. I just got

Hi,
I'm in Nova Scotia, Canada and when I try to use Siri it loads and loads and then says, "I'm really sorry about this, but I can't take any requests right now. Please try again in a little while."
I rebooted and it didn't fix the problem. I just got my iPhone 4s (unlocked right from Apple) several weeks ago.

Siri has been a bit more erratic than usual in the last week or so. Apple has announced a major announcement for 9/12. Conclusions are left to the reader.
Best of luck.
(Occasionally from Lower Economy, Colchester County).

Firefox is taking a long time to open and load my home page, didn't happen while the old version. Also stops responding frequently.

Hello there,
I have been a loyal user of Firefox since 2005 and have never had and issue with this browser. It has been my top choice when it comes to using it in my devices along with suggesting to other people. The problem I have recently began to experience happened after updating to the newer version...4 or 5, not sure which. My Adobe Flash player is up to date and have no add-ons running that are not part of the default browser.
When I click the icon it takes a long time for the window to show up and a good minute before the homepage shows up and is functional to use. I never had this issues with previous versions so I am assuming there might be some bug causing this particular problem. Also, when I am playing games Firefox decided to stop responding and I have to force quit so my games don't suddenly slow down. I am running Mac OS X 10.6.7; I also tested opening Safari and it opened and loaded the homepage is about 3 seconds, I don't wanna have to switch unless I have to. Any help is appreciated, thanks. :)

Hi Donekes,
First off I need a little more information to help with troubleshooting. You say that an error occurs when you "try to re-open the same problem app before the old session completely exits". Does the error have an error code or dialog display? It may also be possible to receive an error log. Here is a knowledge base that explains how to retrieve error logs.
http://digital.ni.com/public.nsf/websearch/54E361E3FF477EC186256C320068184F?OpenDocument
If you are able to get that information then please post. Have a good day.
Brian K.

Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

990 FXA GD 65 VRM Temp and load voltage problem

Similar Messages

Maybe you are looking for