990FXA-GD65 AMD 970 BE CPU Ratio Only working on one core

Pretty much cut & paste of the "990FXA-GD80 AMD 955 BE CPU Ratio Only working on one core" thread.
I have overclocked this AMD 970 BE previously on a asus m3n72-d without issue. Always changing the multiplier to achieve the desired frequency while leaving the FSB at 200. But, after setting up everything on my new 900fxa-gd65 the CPU ratio change to 19x with a fsb of 200 only changes one core to 3.8 ghz and leaves the others at 3.5 ghz (17.5x 200).
full size img link: https://picasaweb.google.com/lh/photo/2lSWaps0s4Gk0fKwdh90bQ?feat=directlink
Already contacted MSI tech support, for whatever good it does me.
Just thought I'd make a new thread to seperate the issue between the two MSI boards.
-d

For what its worth, the problem should be fixed in the latest BETA UEFI/BIOS Release:
--> https://forum-en.msi.com/index.php?topic=151619.msg1122364#msg1122364
Quote
- Fix only Core-0 work with the ratio which value we set.

Similar Messages

MSI 990FXA-GD65 + AMD FX-6300 + 16GB 1866MHz RAM Won't Boot

Hello,
Today I received parts for my new gaming system (sans water cooler, using the stock heatsink+fan until then), however I'm experiencing problems with the setup. The specs are as follows:
- MSI 990FXA-GD65
- AMD FX-6300 CPU
- GSKILL 16GB (2x8GB) 1866MHz DDR3 RAM
- Kingston SSDNow V300 120GB SSD
- 2x MSI GeForce GTX 660 Ti
- EVGA NEX750B1 PSU
- BitFenix Comrade case
Upon powering on (after assembly), the Phase Indicator only has the first two LEDs lit up (Phase 2 Power Mode, according to the manual). No output is displayed on screen. I've tried removing and re-inserting the CPU and removing one of the graphics cards, to no avail.
I would appreciate any help/advise that could be offered, that I might get this system up and running!
Kind Regards

Try to run this system out of the case on non conductive area (e.g. plain cardboard) with 1 stick of RAM only, 1 GPU (try without any graphics cards too), single HDD/SSD, PSU of course, CPU+cooler and monitor+keyboard and mouse. When booting spam Delete and it should take you to the BIOS where you have to change timings of RAM suggested in the post about GSkill memory.
If possible, borrow different brand of RAM to test your PC with.
Make sure that if you're running single GPU, that video cable is connected to the card. If no GPU, then to the motherboard.

HT204053 I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

View only works in one direction,will not change when I turn the phone

view only works in one direction,will not change when I turn the phone

Is the rotate lock on?
http://appletoolbox.com/2013/03/iphone-ipad-or-ipod-screen-will-not-rotate-fix/

Flash only works for one user

Using IE7. I have three users on my computer. All
have Administrator level access. Flash only works for one of them.
When attempting to play a video on YouTube for example it says "You
either have JavaScrip turned off or an old version of Adobe Flash
Player."
JS is turned on and the current version of Flash Player is
installed.
So does anyone know what is going on here?
Thanks

I was able to fix my problem of Flash only working on user
account. I did the following two steps to correct the problem:
1. First uninstall the Adobe Flash Player plug-in and ActiveX
control by following the instructions stated in
tn_14157.
2. Second Download SubInACL from Microsoft to fix permission
issues that prevent the Flash Player installation by following the
instructions stated in
fb1634cb.
Following the above two steps, fixed my problem of only
having Flash run on only one user account. Now it runs on all four
user accounts.
As a side note: The Flash Player plug-in and ActiveX control
would not run in user accounts with Limited access. But when I set
the permission of the user account to administrative, then Flash
would work.
Regards,
Bob

Mouse Track Ball only working in one direction

Hello,
My Mighty Mouse is 3 months old and now the track ball is only working in one dircetion.
When I move the ball forward I hear the distinct sound and the scroll bar on e.g. Safari moves, but when I reverse there is no movement on the screen.
I don't hear the same sound as when I move the track ball forward.
I have tried to reboot but no improvement.
Have someone seen teh same issue? Is the solution to simply replace the mouse?
Thanks / Christer

Use the instructions in this article to clean the mouse.
(15069)

Nokia 6600 only works from one cell tower

I have this weird problem with my phone where it will only work off one cell tower. Once I leave the coverage of that cell tower it will not work anywhere else.
It started a few months ago and i'm not to sure why?
The funny thing is it's the cell tower on top of my building at work, so when i'm at work it will work (calls/txt/etc) but as soon as I go home or even go to another city it will not.
Any ideas?

The first thing I'd recommend you do is to reset your phone, but I can't tell from the 6600's webpage what OS you're running so I can't give you instructions on how to do this.
Have a look through your menus to see if you can find an option to reset to factory defaults, but please remember that doing so will wipe ALL data from your phone.
If you wish to backup your data you can do so using the PC Suite application which you can find here :
http://www.nokia.com/pcsuite
Hope this helps.
Regards,
Edward

Google iPad Sync Microsoft Exchange - Sync only works in One Direction

I have setup my iPad to sync with Google calendar using Microsoft Exchange, which supposes to work bidirectionally.
I found that it only works in one direction such that anything in my Google calendar (includes all the subscribed calendars in Google) got sync to my iPad. After I add a new event in my Google calendar, it is pushed to my iPad.
On the other hand, any new event I add to my iPad calendar is not updated and shown in my Google calendar. This means the sync works only in one direction:
Google Calendar Event --- sync ---> iPad (works perfectly and the event is pushed almost pushed instantly)
iPad Calendar Event. --- sync ---> Google Calendar << FAILED >> (Event entered to my iPad never shows in the Google Calendar)
Sync works unidirectionally but not bidirectionally
Anyone has encounter this problem and is there any solution?
iPad iOS 3.1 PC Windows 7 / using Google & iPad Calendar

I am having the same problem. Would be good to have a solution.

Google iPhone Sync Microsoft Exchange - Sync only works in One Direction

I have setup my iPhone to sync with Google calendar using Microsoft Exchange, which supposes to work bidirectionally.
I found that it only works in one direction such that anything in my Google calendar (includes all the subscribed calendars in Google) got sync to my iPhone. After I add a new event in my Google calendar, it is pushed to my iPhone.
On the other hand, any new event I add to my iPhone calendar is not updated and shown in my Google calendar. This means the sync works only in one direction:
Google Calendar Event --- sync ---> iPhone (works perfectly and the event is pushed almost pushed instantly)
iPhone Calendar Event. --- sync ---> Google Calendar << FAILED >> (Event entered to my iPhone never shows in the Google Calendar)
Sync works unidirectionally but not bidirectionally
Anyone has encounter this problem and is there any solution?
Message was edited by: Stanley Wong
Message was edited by: Stanley Wong

I don't think the solutions here are for the question that's posed.
I have an Exchange account set up on my iPhone 4. I want my Exchange calendar to sync with my Google calendar. I set up Google Sync, and I can see both calendars. However, there doesn't seem to be a way to get the two calendars to sync with each other. i.e., if I create an event on my iPhone, it doesn't push to both calendars. I have to pick one or the other.
The solution Stanley Wong suggested only sets Google as your default calendar; it doesn't actually sync the calendar events between the Exchange and the Google calendars. Unless I missed something?
Is there a solution for actually syncing the two calendars with each other? It seems like we should be able to create an event on the iPhone and have it sync to both phones without having to have Outlook open on a PC and using Google Calendar Sync to do that.

Problem: Bookmark sync only works in one direction

I have 2 computer, computer A has vista and computer B is a netbook with XP. The problem is that the bookmark sycn only works in one direction.
For example: both my computer has the same book marks (previously sync with X-mark which is now disabled). I decided to do some clean up on computer B. If Y sync computer A, nothing happens, but when I sync computer B, all the cleanup I made has been undone since computer A override all the changes I made to B.
In other words, the changes I made to B can never be applied to A.

When you're doing a "clean-up" like that you need to use '''Reset Sync''' in Tools > Options > Sync - Current Account = Manage Account and use the ''' ''Replace all other devices with this computer's data'' ''' option. See the attached screenshot - use the third option.

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

My flashdrive only works on one of the usb port. the other usb works with my iphone charger, but not my usb. any suggestions? should i take it in? its a brand new laptop.

My flashdrive only works on one of the usb port. it will not work on the other usb port. however, the other usb works with my iphone charger.
any suggestions? should i take it in? its a brand new laptop.

Reset the SMC and PRAM
SMC Reset:
Shut down the MacBook Pro.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM:
Shut down the MacBook Pro.
Locate the following keys on the keyboard: Command, Option, P, and R.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Ipod only works in one ear. PLEASE HELP!!!!!!

My first generation ipod touch only works in one headphone. I've tried 10 different pairs of headphones but with all of them the sound only plays in the left ear. It works in both speakers when i plug it into the speaker that connects to its wider slot (the opening on the ipod next to where the headphones are plugged in) but when i use a cord that connects to the headphone slot that lets me play my ipod on my cars speakers it only works on the left side speaker.
I don't know what's wrong with it and i really need your help, so PLEASE HELP ME!!!!!!!

This exact thing happened to my first gen touch. Sadly, I don't have good news for you. First side of the earphone jack stopped working. A few weeks later the headphone jack wouldn't work at all. (Using the docking slot along the bottom still worked fine the whole time, just as you said.) Unfortunately it's not possible to replace the headphone jack without replacing other major components inside the touch so it's very expensive to repair. I could not fix the problem and had to buy a new touch.

Ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

ill.CS3 - Why can I only work with one sheet on the desktop? I want to design a multi page document...

Use this ancient work-around:
Create mutli-page PDF | Illustrator

990FXA-GD65 AMD 970 BE CPU Ratio Only working on one core

Similar Messages

Maybe you are looking for