990FXA-GD65V2-all plugs going to the motherboard-help me out!!!
Hello again,
Its been a little since my last post....took a little break from building the monsters. Here is the specs I will have on this board...
FX 8150
990FXA-GD65V2
PCS HD7870 GHZ version
240gb HP SSD v300a
RX-850AE-Modular Power supply with a 80 Plus Gold
ZALMAN Z11
H80I cosair Water loop
My question this time. I have used this board in the past-maybe it wasn't the GD65. But I noticed when looking at the pics. It has an Extra 6 pin plug for the board. So along with the 8 pin and the 24 pin. Do you have to plug in the 6 pin too, even if your Video card already has 2 of the 6 pins?
Do I plug a 6 pin in the board----And Plug the 2 six pins in the Video Card. Is the 6 pin that goes into the board the same plug as the 6 pin that goes into the card? I have not recieved the board yet....But I would like to figure this out before it gets here.
Thanks all for the answers and help.......
So all the updates are complete...Superfast...Way better than the 890 ECS board I had in this...But I have a few questions..
Live update---Is saying I need to update my chipset. So I downloaded the newest chipset...all good...But when I re run Live update it says the same thing...Cpu-z say Chipset RD9x0 southbridge SB910/950 LpCIO F71889A....
Everything is running fine and great---But I also noticed....In CC I see Overdrive for the Card....But I don't see the amd overdrive for the CPU...Kind weird.....I had it on the 980ecs board--But it don't show up here.......I even went to amd site...download the latest driver for the 7870 and the chipset........Just weird Live update is still saying I need to update-The chipset.......
Next question-I decided to use the DDR3 1600 Ram I had with the Cas7......But when I went into Bios....I set the ram to auto-- 1600....I believe I set to link---and than it let me set the timing----But when I put in the timing 7-8-7-24 and left the rest on auto.....It would not post to bios and I had to reset......When I went back....I only set the ram to 1600...and did not change anything else....Booted fine....Ram is Fast....But timing is 9-11-11-29....I will probably leave it alone....If it aint broke don't fix it........But wondering if I did something wrong-Ram is G.skill Ripjaw X." I have decided to save the 4x4 gb 2133 for my next I7 3770k build next week or so"
So far Updates went Great....Did not take to long....Cpu score higher on this board.....I got a 7.7 cpu---7.7 memory--7.9--aero-gaming-Hard drive........On the ecs board I got 7.6--7.6....and 7.9 on the rest..........Temps are awesome with new H80I-----16 and under on idle"we know that bulldozer use Hex decimal below 45c".....and on load around 45c......Thermal paste....I just used Cosair......Cosair link on silent....
Any Idea on the chipset and the timing ?????
>>>>Do you think it has to do with control center?<<<<<<<<<<<I also noticed-In Bios there was no pci-e options....I know that this board does not have on board video. But I am pretty sure boards I have had in the past-still had the option...Not a big deal-Just wondering...
>>>Sorry for making this so long<<<<
Another thing I noticed-or a few things.....The FX 8150 and a few other amd 8 core cpus-When booting, like to pause before getting to the bios screen-Before the little numbers on the btm. Before it get to any parts of the bios before boot. I have built about 10 of these bulldozer beast. Different boards-Brand new Processors-all purchased from the start to now. Every single build-I have had the same issue. 15 to 10 second pause-blank screen, computer on with fans-Than the little numbers-bios screen and windows. Once it gets to the little numbers-it take 15 sec to boot. total boot time-30 seconds....If it would work normal-I would get a 15 second boot....Do you happen to know why?
I also noticed-because now I have one click bios 2 in windows. Temps are way way off. any windows monitor tool is reading in the low teens...But Bios give the right temp. Figured out-You can not use any hardware monitor tool for the cpu temp----of course till it hits 45c or higher....But I did find it on Hardware Monitor-TMPIN----Mine is 0......Not sure what other boards might be....But I was able to compare both and they go up in temp together and the same with down....TMPIN0 is my Bios core temp....Just wish there was a program that could pull the bios temp and put it on desktop-My corsair Link is wrong--But You can watch the Temp of the pump--Hardware monitor-speccy-and core temp when it don't freeze the 8150's..."whole diff. Issues there.".
These are the only issues-and Things I figured out with this build.
Thanks again for all your time and trouble.......
Similar Messages
-
I have a new iPod touch. It shows a picture of a USB plug going into the iTunes logo. Can't get it to do anything. What do I do?
You really need to repair your computer.
Please read Chapter 2.
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
How do I keep iMessage from going to the upper right and out of sight?
Imessage in Mavericks at random, on sleep, and when minimized, goes to upper right on the screen and I cant get it back. Even Mission control can not access it. I have close iMessage and restart. How do I keep it from going to the upper right and out of sight?
Hi,
I think a Screen Shot will help.
Use the CMD+shift+4 and then decribe around the area when you see the cross hairs.
To Post here use the Camera icon in the reply screen and then select/navigate to the Screen Shot (normally on your Desktop) and select it.
Then use the Insert Image button.
I don't use Sleep so I can't speak to that.
Minimise should put it in the DOCK.
Do you mean coming out of Minimise ?
Actually where is your DOCK (mine is at the bottom and I nearly forgot other people have it in different places)
If it is on the right is the Finder icon top of the icons ?
If the windows of an App are minimised then it does not appear in Mission Control (some of this is mixed with normal behaviour).
9:56 pm Tuesday; May 20, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I have updated all plug-ins, cleared download history, deleted sessionstore files but this still happens regularly - every few minutes.
I think that I have found a solution: [ha ha ha ha ha h a]
I am running XP SP3
1 - uninstall Firefox - whatever version you have
2 - search for ANY file related to 'Mozilla' that is left behind BECAUSE much crap is left & DELETE it
3 - then search & DELETE every 'Mozilla' entry in the registry - DELETE THEM
4 - then reinstall the latest VSN without any add-ons or plug-ins - only install them when they are asked for - like Flasplayer etc
seems to have worked for me
whew -
Can't download update 5.0.1 to my iPad2. I disabled all security items in fact have deleted them from computer, but the download still times out advising check settings but all is set right? Can any one help with this matter?
I'm still experiencing this problem. I went to settings, general, software and it says Install now. But when I try, I get an error message.
-
A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help
Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous. -
Importing all my music to iTunes(Please help me out)
Hello,
I just purchased a 20gb ipod today and am havintg some trouble importing all of my music. I have complete music library's in "RealPlayer" "Winamp" and "Windows Media Player", it doesnt matter which one of these i import from(whatevers easier i guess). I have tried the add folder option on "Documents and settings", "my documents" and "program files" and it has only imported around 600 of the 3600 songs in my music library.
Also, i have read pages and pages on this board trying to find an answer. I saw one post which talked about this very issue but it was never resolved. It confronted importing from windows media to iTunes and the answer was to highlight all the music and drag it over to iTunes. This Does Not Work. I highlight all my song, hold down on the mouse and move it over to the iTunes box. However once i leave the Windows media box the arrow from my mouse turns into a circle w/a line acrosse, not allowing me to drag it.
Please Give me an answer on how I can import all my music to iTunes. If you do I will kiss your feet and applaud your genious.
Please help me out.
JoshHi,
No. I never found a solution to the problem to import my music libary from Realplayer to itunes.
I have exhausted everything that I know and have read as tips from this and other posts.
Please come back to post an answer if you find a solution and I will do the same.
I am going to go ahead and just synch to Realplayer to fill up my ipod. Then I will see if I can switch to itunes for all future synching and hope that I can find a way not to lose the music on my ipod that came from Realplayer. If this doesn't work, I will have to stick with Realplayer as my main music interface and synching for ipod.
Jeff -
Help!
Since I downloaded the latest software for my iphone I can't play my music. The screen just shows the album cover pictures whizzing across and I can't select an album, a song or anything....................... no sound whatsovererDelete your music and re-sync from iTunes
-
Flash 10, Windows 7 and all browsers = crash of the browser HELP
I have Win 7 Ultimate edition, did a clean install last night. I have tried Flash with IE8 32 & 64 versions, Fire Fox and Safari all with similar results.
I am trying to complete Flash Based learning lessons for work to give you an idea of what I am trying to accomplish.
the problems are as follows:
IE8- Both Versions- I can run through the entire presentation but once I click finish to close out the browser crahes and the flags are Browser and Flash
stopped working I tried the remedies windows produced for me with no results.
FireFox- Problem- The window opens and I can see the presentation but the navigation buttons have no button just the words INVALID
Safari- Problem- The presentation shows up with all navigation buttons but I am not able to click any of them, the only option that works is the windows close button
I have tried reinstalling by downloading from each different browser, I have tried a system restore to last night right after my windos install, I have tried stopping the processes in msconfig (which was a soltuion in another thread) and a few other things (nothing too technical). I asked one of the IT guys in the office about it and of course didn't have time to toubleshoot it for me before he went to lunch, his responce was dam thats wierd.
Any help from the forum would be greatly appreciated.We've been fighting this problem FOREVER!!
Why doesn't Adobe simply come out with a "Troubleshooter/Personal Settings" Inspector Program?
That way, I would start that program & it would analyze my op system, browser & version, current flashplayer being used
, and tell me the changes needed. If Adobe REALLY wanted to do it right, that program would make necessary changes "FOR US"! But, *WILL* THEY? Knowing Adobe, I DOUBT it.
If changes need to be made, it simply tells me what they are & give me links to accomplish all of it?
IS THAT SO DIFFICULT? -
I can't get my phone to connect to itunes when i plug it into the computer, help?
iTunes doesn't pop up when i plug my phone in and it doesn't show that my phone is connected, so i can't put any music on my phone now! help please!
Hello Kayla,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in this article to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Hi this has become a big problem for me. iWork doesn't work eaither. Please hel me to solve this proble. Thank you.
Sounds like a Windows installer. Does it say Mac on the disk? When you open the dmg, does it say Office:Mac?
-
My E-Mail is going off the screen, Help!
I have a MacMini with Mail Version 2.1 (752/752.2)
Very recently my e-mail both mine outgoing and my incoming mail have gone off the screen and I cannot read.
Suggestions? Questions for me?
Please help.Didn't you change the display?
You can drag the mail window in a way you can reach
the bottom right. Them you can recise.
You can also click on the green (top left).
The green at the top left was what cured my problem. So very basic and yet I never had paid any attention to it. Thanks so much. I do know about shrinking the window size, but the other problems was pushing me over the edge.
Thanks again for your assistance! -
Will not include all my topics in the compiled help file
I've been rebuilding my project, because it seems like my
file were too big and so the project was no longer compiling
successfully.
Now I have spilt some of the contents of the larger word
file, into two smaller word files and included the topics from
these into the TOC and bascially rebuilt most of the project.
However, now, the compiled version of the file only includes the
topics and books from the first smaller file and ignores that
contents in the second file.
How do I solve this? I have selected to include both these
files into the compiled file, but it still does not work.I've been rebuilding my project, because it seems like my
file were too big and so the project was no longer compiling
successfully.
Now I have spilt some of the contents of the larger word
file, into two smaller word files and included the topics from
these into the TOC and bascially rebuilt most of the project.
However, now, the compiled version of the file only includes the
topics and books from the first smaller file and ignores that
contents in the second file.
How do I solve this? I have selected to include both these
files into the compiled file, but it still does not work. -
MSI P7N SLI PLATINUM OVERCLOCKING THE Q6600 HELP ME OUT!!!
This is my build
MSI P7N 750I PLAT
Q6600
ZALMAN 120MM COPPER
PC 6400 - 2X2G 4-4-4-12
650W PSU
9800GTX
I cannot overclock the processor what so ever, it wont even let me go from 800mhz fsb to 815 without it crashing. I NEED PLEASE someone to help me with this, what settings to i put it at along with the voltages.
im about to return this peice of crap board and njever buy an msi ever again i fi kant solve this issue, i want to get it running, please help!Quote from: Langnasen on 13-May-08, 01:02:23
You do not want to see them going over 60c really.
You can go over 60C without any problems, just keep it under ~70C under full load.
If you want your cores below 60C you cant oc very far even with a great cooler, or you'll need watercooling or a dozen fans @high speed
I've seen many people with stress temps of around ~68C and I know someone who has it running 24/7, with cores at ~65C at peak moments for a few hours.
His system has been fine for almost 2 yrs now .
And what about the summer?
It has been 27C here in Holland and my cores ran sometimes over ~61C for a couple of hours (lotta decoding/encoding done) and all is still working fine
Below 60C with a decent oc on air cooler,in summers is a nono as far as i know.
Unless like you, you like a lot of fans spinning at high speed ( must sound terrible ) to cool things down. -
MOVED: MSI P7N SLI PLATINUM OVERCLOCKING THE Q6600 HELP ME OUT!!!
This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=116949.0Quote from: Langnasen on 13-May-08, 01:02:23
You do not want to see them going over 60c really.
You can go over 60C without any problems, just keep it under ~70C under full load.
If you want your cores below 60C you cant oc very far even with a great cooler, or you'll need watercooling or a dozen fans @high speed
I've seen many people with stress temps of around ~68C and I know someone who has it running 24/7, with cores at ~65C at peak moments for a few hours.
His system has been fine for almost 2 yrs now .
And what about the summer?
It has been 27C here in Holland and my cores ran sometimes over ~61C for a couple of hours (lotta decoding/encoding done) and all is still working fine
Below 60C with a decent oc on air cooler,in summers is a nono as far as i know.
Unless like you, you like a lot of fans spinning at high speed ( must sound terrible ) to cool things down.
Maybe you are looking for
-
XML Publisher report output in RTF format does not display full page
Hi, We have one XML Publisher report, the output of report in RTF format is not getting displayed in Full Page in normal way (MS Word -->View menu --> Print layout) but we can see full page display when we do MS Word -->View menu --> Outline. Appreci
-
JPEG subfolder after using "Image Processor" ...
Hi, I use "Photoshop->Image Processor" to resize my photos and I get always a JPEg subfolder in my target dirtory, I don''t want to. In the "Image Processor" I selected the option "Save in Same Location" and under "File Type" the option "Save as JPEG
-
HELP !!!Everything deleted itself off my 80gb ipod,CAN I GET IT BACK? HELP!
I am hoping someone can help me,i am very stressed!!!I have an 80gb ipod i bought 15 months ago.No problems. I bought a new ipod touch 2 weeks ago as well.uploaded stuff fine.Went to update all my podcasts on my old one last week,everything has gone!
-
Imy ipad is disabled and I can not remember passcode
-
I want to make a word in all caps without having to use arrow on each letter
I want to make a word in all caps but not have to use the arrow on each letter. how can i do it?