990FXA-GD65v2 and New SSD

I'm starting to pull my hair out over this because I'm not sure what's going on!
My system includes the 990FXA-GD65v2 on BIOS version 19.9, which it came with. I have two (2) x 2TB HDDs in a RAID 1 configuration for redundant data storage, and a single Samsung 840 Pro 250GB with the OS on it. I recently purchased a new Samsung 850 EVO 500GB to replace the 840 Pro that was constantly running low on space. With no requirement to retain the existing Windows 8.1 Pro operating system, I opted to load the operating system fresh. After installing the new SSD in place of the old one, I was able to see it in BIOS, as well as in the RAID controller (though it is set as a "Single Disk" like the previous SSD). However, I'm not able to see it in the Windows 8.1 Pro installation DVD.
Curious, I replaced my original SSD, and hooked the new SSD into another SATA port. Once booted into my original OS, I was unable to see the new SSD in device manager.
I also attempted to clone the old SSD to the new SSD using Acronis 2014 on a boot CD. The clone was successful, but on restart, the computer was not able to boot to the new SSD.
Both new and old SSDs are on the latest firmware. I attempted to provide the RAID driver for the board while trying to install Windows, even though the RAID 1 configuration shows up already, but the new SSD still does not show up.
Help me!
Thank you so much in advance for any replies.

Quote from: Funki on 05-June-15, 23:04:31
k.4 the version of the 990FXA-GD65 is compatible with the 990FXA-GD65V2?
the 990FXA-GD65 and 990FXA-GD65V2 are exactly the same the only difference is the V2 version shipped with a newer version of the VBIOS back when the FX CPU's first hit the market as the normal ones did not have a BIOS that supported them!
In essence they are the exact same product and use the exact same BIOS versions as each other the V2 just points out it will support a FX processor out the box!

Similar Messages

I need help with my Iphone, Itunes, and new SSD and other SATA harddrive where old Itunes files are kept. I cannot sync up new albums I ripped to itunes.

I recently bought a new SSD and installed windows and all major files to it including Itunes. My old 500GB SATA harddrive is still connected and accessible to Itunes, but I cannot get any new album I download to Itunes to sync up with my 64 GB Iphone 5.
Please help me as I am going raving mad over this.
P

Follow the directions here:
https://discussions.apple.com/docs/DOC-3141

Help With MAC Mini Server and New SSD

Hey Guys,
I just got a Mac Mini Server. I swapped out one HD for a new SSD. A Crucial One.
I am booting in recovery mode and it only sees one HD and says it is 1.5 TB, (1 tb regular and the new SSD is 512)
I just want to run osx on the SDD .. help

I'm unsure of the proper procedure as I'm not experienced dealing with Fusion Drive setups. If Disk Utility shows you have a 1.5 TB drive, then what do you see when you boot the computer and check disk drive space using Get Info? I know you can revert the volume you have back to standard format if you don't mind using the Terminal in your Utilities folder:
Open the Terminal and paste or enter the following at the prompt:
diskutil list
Press RETURN. This will list for you the device information for your HDD. Here is an example of the output:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Yosemite                119.2 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
You want what you see at the top left - /dev/diskn, where n is the integer number. Then enter or paste at the prompt:
sudo diskutil cs revert /dev/diskn ; replace the n with the integer number found above.
Press RETURN and enter your admin password when prompted. It will not echo to the screen, so be careful typing. Press RETURN again. Wait until it completes the process which is when the prompt returns.
Given the potential danger when using the Terminal in this way, please be sure you have first made a reliable backup. Better safe than sorry.

T430s mSATA SSD cache and new SSD?

I just ordered a new T430s with a 500GB drive and the 16GB mSATA SSD cache. A friend has now talked me in to replacing the 500GB drive with a Samsung 840 Pro 512GB SSD, though nothing has been purchased just yet.
My question is: obviously its dumb to have a 16GB SSD cache sitting in front of another SSD, yes? So, what are my options? Can I repurpose the mSATA SSD for something else? Should I just pull it out?
(And, yes, I should have thought of this before I placed my order. Hindsight, right?)
Thanks for your ideas/help/instructions!
Best regards,
Charles

Hello and welcome,
You'll get a bunch of different opionions on this
If you're going with a big SSD, you might as well just remove the mSATA device.
I've taken a different approach with my T420. Left the HDD in and installed a 256GB mSATA SSD. The SSD holds the OS and the stuff that I want to be fast. The HDD has less-frequently accessed data - and a backup of the SSD.
The HDD is set to spin down when inactive. Saves power and noise. Mostly the machine just runs off the SSD.
My $.02,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across. However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro. I'm finding that it doesn't run as quickly as it used to.
A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library. Keep all documents, pictures, music etc on the current hard drive.
I would be grateful if someone could help me with:
1) installing OSX on the SSD without copying across data from the current hard drive
2) transferring applications, system and library folders across to the SSD so that they still function
3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
If anyone could help with this, it would be much appreciated.

If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
Clinton

My mid-2009 MacBook Pro's hard drive is near death. I want to install a new SSD and work from scratch. Please help.

Recently, my mid-2009 MacBook Pro has been crashing when I close the screen ("it's having a problem recognizing when the screen is closed/open and deciding what to do, error overload etc."). It wasn't an SMC issue so I took it to an Apple Store, ran some tests, and decided my hard-drive is failing.
Not wanting to spend an insane amount of money on some "official apple hard-drive," I want to install a new 256GB SSD instead. Hoping to squeeze as much life out of this computer as possible (in January I upgraded from 4 GB RAM to 8 GB), I would like to try and start from scratch, i.e. back-up important folders, music, photos etc. and only take that to the new hard-drive. If someone could explain all the steps I need to take to safely complete this task (or point me in the direction of a guide) I'd appreciate it.
Potentially Important info:
     Model:                mid-2009 13'' MacBook Pro
     Processor:          2.53 GHz Intel Core 2 Duo
     Memory:             4 GB 1067 MHz DDR3
     Software:            OS X 10.8.4
Some additional questions I have...
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing. The batter was replaced in March, the RAM was upgraded to 8 GB in January. When the battery was swapped, the trackpad went           nuts so that's new too. Only other issues are a slightly loose audio jack and the left side of the screen being slightly wobbly (hinge is worn I'm told).

cwgonzalez1192
     Should I be concerned with making a fully bootable back-up (not sure what that is called) as well? If so, what program should I use to create it?
     How much more life should I try and push out of this computer? I'm an engineering student and really only use it for web-surfing, music, and
          word-processing.
Well there is no "official Apple HD / SSD" in any regard, no worries there.
If as you say youre only using same for surfing and word processing, why the need for a SSD? You would not notice any speed diff. in use on either of those,....in boot times yes, but in word or surfing, not.
You can push it likely a few more years, for mere surfing and word processing,...many many years.   Up TO the point that any major fixes become unrealistic relative to getting a new(ER) machine.
Concerned with a boot clone? yes and no. Its an ideal immediate recovery, since you cannot boot from Time Machine, ....in case of HD crash, recovery takes seconds from boot, or 20 mins or so from removing old and installing a clone. All the prosumers and pros have at least one updated clone of their prime machines.
You can do a "fresh install" if you choose, however if your current drive is FINE, why not merely clone it and save yourself some headache?...., but that is your prerogative of course.    Ideally 2 drives, one to backup your data (you need that regardless of installing a new drive for sake of a backup/archive,...ideally 2 actually, not merely one).
You could clone internal to NEW SSD/HD , ...then offload unnecessary files to an external to free up space and clutter and run off the clone, and this would only take a couple hours......the clone itself takes approx. 40+ mins.
CLONE Apps :
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working.

I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.

Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.

I got a new SSD and I cannot put anything onto my iPhone 4S through the SSD, but I can on my old HDD. How can I fix this issue?

So recently I purchased a 250g SSD for my new build, while still keeping my old 1TB HDD. Whenver I try to use iTunes (the latest), I cannot transfer ANYTHING onto my iPhone 4S. There is no "Add to" button, nor can I drag and drop. However, I can do both on my old HDD. I also own an iPad 4, which I can easily use on both drives. This is quite annoying because I have to restart my computer just to add music or videos, etc. I do not want to sync because I will lose all of my music, or whatever else it takes, and I do not want that.
So how can I enable file transferring on my new SSD?

Move the ENTIRE iTunes folder from the old computer to the new computer, or drives in this case.
iDevices are designed to only sync to one library (computer). Attempts to sync with a new library will require removing all media from the device and replacing with media from the new library.

My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

My hard drive crashed on my Imac 24" 2009, I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

Can I switch out a hard drive for an SSD without having to clone the existing hard drive, and then install Yosemite from an USB Boot Drive onto the new SSD?

Can I simply replace a hard drive with a new SSD and just install Yosemite from a USB boot drive onto the SSD? I recently bought a used MBP and it has absolutely no files on it except for the OS, and so I'm assuming I don't need to clone the current hard drive as I can just reinstall the OS onto the new SSD.

Honey_Revenge wrote:
Thanks.
Just a quick follow up question, is formatting the SSD with HFS+ done in Disk Utility?...
It's possible that the SSD will be set up for use on a PC, which means it will have a Master Boot Record partition table rather than a GUID Partition Table, which is what Yosemite needs. In Disk Utility, select the SSD and click the Partition button. Create a new Partition Layout and click the Options... button at the bottom. You'll likely see MBR is selected. Choose GUID instead and Mac OS Extended (Journaled) for the Format.

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

Mountain Lion and Mavericks with new SSD

I tried Yosemite on my MBA (mid-2011) and lost my hard drive. Apple replaced it with an SSD at no charge
since my Apple Care had only recently expired. Now I need to find my 2013 tax return on my Seagate
external hard drive but cannot find it on Time Machine backups. Can you help me?
The lost hard drive was using Mountain Lion. The new SSD has Mavericks.

Well, the only place for your records would be on your backup(s). The hard drive was replaced, so there is nothing there unless Apple restored all your data from your old drive to the new one after the replacement. If they didn't, then your only hope is your backup.

Upgraded hardware, and went from XP to Win7 - how do I transfer/install CS5 onto new SSD hard drive?

I recently upgraded all my computer internals; new mobo, Samsung SSD (solid state drive), CPU and ram. Also went from XP Pro to Win 7 Pro, with Win 7 Pro now residing on the new solid state drive. I still have the old 1TB Serial ATA hard drive connected as a storage device, and this is where CS5 resides. But of course, my CS5 applications are now unusable.
Can someone please give me some guidance as to how to transfer the CS5 installation from the old HD (XP Pro) to the new SSD (Win 7 Pro)? I started doing some research, and read about first "deactivating" CS5, but I cannot open any of my CS5 applications to "deactivate". So I am stumped. I am reticent to attempt a new install from my CS5 disks until I learn the proper process..........
Any advice would be greatly appreciated.
Dave F. in Rhode Island

don't transfer, reinstall.
if you need to reset your activation count, contact adobe support - http://helpx.adobe.com/x-productkb/global/service1.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Best way to migrate to a new SSD drive for performance and reliabilility

Hello all,
My 2011 15" MacBook Pro is about 3 weeks old and my new OCZ Vertex 3 120GB SSD is coming in tomorrow.
What is the best way to move my system over to the new drive? I have Time Machine backups on my external Firewire drive as well as complete drive images made with CCC. I have read where some have had problems cloning to a new SSD using a drive image.
My plan is to format the drive and install the OS with the cd then move my applications and files over with Time Machine but it would be much easier to just clone the existing drive image but I don't want any problems down the road. What is the best practice?
Thanks.

Follow this outline:
+Step One+: Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Quit and shutdown.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
+Step Two+: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who are also a good vendor for drives.
+Step Three+: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
+Step Four+: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
+Step Five+: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive.
Source means the old external drive.
+Step Six+: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Installing new SSD into older MacBook Pro and Organization Questions!!?

Hello,
I am about to pull the trigger on a new Samsung 840 Pro 512gb ssd for my older Macbook Pro 5,3 with 2.66 Intel Core 2 Duo.
I need some advice or at least point me in the direction of where I can read up to date info on properly executing the install of my new ssd.
A little background:
I have a Seagate 500gb external hdd that has many older pictures/videos on it as well as my "just about full" 320gb hdd on this computer that will be getting the 512ssd.
Any comments/suggestions a to how I can organize all of this and have it in one accessable place? (I was planning on installing the 512ssd on this computer, putting everything on the 512ssd and then wiping the external drive and using it as a backup periodically in case something went wrong with the new ssd I would be installing on this computer. Follow me? Any help/advice would be greatly appreciated.
I've been telling my wife that we NEED to replace this drive before we lose many of our important pictures and other items on it. We have used 319gb of which 45gb is still available. I am nervous as this hdd is about 6-7 years old?
The pictures/videos are the most important to us and do not want to lose them. Thanks, in advance, for your help!

How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu.
You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

990FXA-GD65v2 and New SSD

Similar Messages

Maybe you are looking for