990xa-gd55 cpu smart fan control doesn't work?

Hello, i purchased this MB few days ago, and I have a problem stated above. I set the target temperature at 40 C, and cpu fan min. speed at 75%, but my fan (Cooler Master Excallibur 2000rpm which has 4 pins) slows at 650 rpm, and no matter what I do (play a game, run linx or prime 95) it doesn't speed up. I flashed BIOS to the newest version. Anybody else having this problem, or possibly a solution?
P.S. Sorry for my bad English.

I don't like CoolerMaster stuff, so I bet it is loud as ... by design. 
It is important to have the motherboard out of the case when seating the processor. Otherwise you can't be sure you did a good job.
Page 3-16 in the manual I find here (all old King's English version) http://se.msi.com/service/download/manual-17394.html
"Important
To ensure that Cool’n’Quiet function is activated and will be working properly, it is
required to double confirm that:
Run BIOS Setup, and select Cell Menu. Under Cell Menu, find AMD Cool’n’Quiet,
and set this item to “Enabled”.
Enter Windows, and select [Start]->[Settings]->[Control Panel]->[Power Options].
Enter Power Options Properties tag, and select Minimal Power Management under
Power schemes."
Some kind of changes, like overclock, may take away the Cool'nQuiet feature.
Not enabled it wont work.    If it was a BIOS bug I don't think SpeedFan would be more successful, but I am not 100% sure.

Similar Messages

  • MSI Z97-G45 Smart fan control Bios v2.0 vs Bios v2.3

    Hello
    I have an MSI Z97-G45 Gaming motherboard in my new setup with 4ghz i7 4790k and 16gb of ram and so on that i bought a few weeks ago. At first the motherboard had v2.0 Bios and everything worked just fine but as i like maximum compatability and other fixes i upgraded the bios to the latest one v2.3.
    In my setup i use the bios smart fan control for both system and CPU fan, i set it at a curve where the fans instantly will rise the fan speed when doing tests like Prime95 and Aida64. When doing the tests the fan rised from idle 800rpm to neded fanspeed for the correct cooling for my CPU and reached maximum 1500rpm in a matter of seconds to keep the CPU cool. This worked perfectly with Bios v2.0 but after i upgraded the bios to v2.3 the smart fan control changed fanspeed extremely slowly, it took almost 50sec for the fan to speed up from 800rpm to 1500rpm when stressing the CPU at 100%. When i stoped the stress test the fans slowed down to idle 800rpm very fast with bios v2.0 but with bios 2.3 i took a looong time to slow down to idle speed again from 1500rpm.
    Because of the slow changing fanspeed in bios v2.3 i downgraded to v2.0 again and then my fans works just as i want them to do.
    What is the reason for this problem/change in bios v2.3 and will this be fixed in future versions? Is this a known problem with newest bios?
    When people will buy this MB and it has v2.3 from factory the smart fan control will not work properly and buyers will not know how good it can acctually be. I think the Smart fan control in v2.0 is super great 
    //Eson

    Hello,
    reflash this bios .241:
    https://dl.dropboxusercontent.com/u/40094917/E7821IMS241.rar
    then retest

  • CPU Smart Fan Not working

    Hi! I am using the Z97 Gaming 7 with a H55 Corsair Water Cooler. Somehow when I tried to use the smart fan control it doesnt work on my system. The fan keeps spinning at 100% although I the temperature is at 30+ Celcius only. The smart setting is the fan is only supposed to spin at about 20% speed when it's 30+ Celcius. However the System Fan Smart Control seems to be working as the speed actually follows the temperature of the system. Why is this happening? Is there something wrong with the motherboard or the cpu smart fan control.

    Quote from: fabho on 28-September-14, 02:28:46
    Hi! I am using the Z97 Gaming 7 with a H55 Corsair Water Cooler. Somehow when I tried to use the smart fan control it doesnt work on my system. The fan keeps spinning at 100% although I the temperature is at 30+ Celcius only. The smart setting is the fan is only supposed to spin at about 20% speed when it's 30+ Celcius. However the System Fan Smart Control seems to be working as the speed actually follows the temperature of the system. Why is this happening? Is there something wrong with the motherboard or the cpu smart fan control.
    Sorry let me rephrase my question as I was typing half asleep last night  .
    Actually in the MSI Command Center, the smart fan control was setup in a way that the fan should be spinning at 20 to 30% of the max speed while the CPU temperature is at 30+ Celcius but in my case the fan was still spinning at 100%. In the setting the fan should only spin at 100% if only the CPU reach 80 Celcius but in my case it's already reaching max speed. I tried to manually control the speed of the fan thru the Command Center using the manual mode and it fails as well the speed is still at 100%. As for the System Fans, I am able to control the speed thru the smart fan control whereby the speed of the fans will adjust accordingly to the temperature of the system. Looking forward to getting some feedback here. Thanks.

  • Replay video in Muse (some controls doesn't work)

    Hello colleagues,
    Can't understand what is happening. I put a video in the Animate and assign controls for buttons (for example, replay video from 0:00 sec). For stage and video autoplay function are disabled.
    Then I export the oam-file and insert it into the Muse with a Scroll Effect "Edge Animate" (Autoplay) to play the video at a certain point. Video starts correctly, but some controls doesn'n work, for example, "replay video". Along with this function "Toggle video play/pause" works correcly.
    Actually, I want to loop video playback but it doesn't work in the Muse (Loop function for a video).
    Can anybody recommend a solution?
    Thanks!

    Hello Joe,
    This is very interesting, but when I upload the project from Muse to my FTP-server, everything is working properly in all of browsers, all of controls and loop for the video clip. I found it by accident when I lost all hope. In other words, the problem is only when previewing the page in a browser (via the built-in local server). Maybe this is a question for the team Muse? Anyway I can send it in PM.
    Thanks for your reply,
    Alexander

  • I upgraded my iMac to 10.9.4.  Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work.  How do I fix this?

    I upgraded my iMac to 10.9.4.  Now the feature where you can go to 4 diff. screens (Command+Control) doesn't work. 
    How do I fix this?

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Smart Web Printing doesn't work in IE9

    Smart Web Printing doesn't work in IE9...
    This question was solved.
    View Solution.

    IE9 has not yet been released in final form, it is still in Beta.  I do not know if HP has any plans to support the Web Printing application on IE9, but if they do I would not expect them to release anything before the official IE9 release.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5

    My beats studio 2013 work fine on my ipad but the mic/ volume control doesn't work on my iphone 5. Can anyone help me?

    Thanks, daniel.early79!
    I have an iPhone5 bought in late Dec 2012.
    I've noticed on rare occassions that the volume down button some times would not respond.
    Starting yesterday, the volume down button would not respond more consistently.
    Sometimes a reset would fix it, sometimes a reset network would fix it, but the problem would come back.
    Came across this thread, and pressing gently on the upper right hand corner fixed it!
    I remember seeing some video on Youtube or iFixit that shows how to replace the power button. It appears that the volume buttons and the power buttons are tied in together on the same piece of connector. I supposed taking the iphone in and out of cases may have warped or twisted the connector inside the case ever so slightly that the sensor for the down volume button got shifted.
    The down volume button works now, after doing the trick you suggested. I'll wait and see if it comes back before taking it in for warranty repair.

  • Volume control doesn´t work with iphone 3gs

    Hi, the volume control doesn´t work with my ihpone 3gs, i´m using the apple headset, any suggestions???

    ´Till the moment it is, i just recently received a notification with a software update, but i tried with another 3gs with the same characteristics and it worked.

  • With new os 5.1 for iPhone, the headphone controls doesn't work

    i've noticed that with new release of os 5.1, the headphone controls doesn't work. no volumes controls neither the central control.
    with ipad the same headphones works well.

    I'm having the same issue, but without having upgraded to iOS 6.1 - it just started out of the blue last night.
    Timeline:
    It suddenly heated up, I turned it off. Battery at 87%
    After maybe 45 minutes, I turned it on again. Battery at 45%. It would not charge at this point.
    I tried MANY things, including turning off WiFi, mobile data, location services, Gmail sync (though not Exchange sync, which had given no problems before. I'd recently changed some Gmail settings, so I reverted them).
    I tried to restore, but my crappy internet was unable to download the iOS 6.1 file.
    I looked it up on the internet and performed a hard reset, after which the phone began to charge, to my delight.
    I charged it to nearly full (92%) then lay in bed using Twitter and iBooks for some time, after which battery was at 65%.
    After sleeping for around 7 hours, the battery lies dead. Attempts to charge it (both from the wall adapter, which is a standard India 220V charger, and from my laptop) are making it flash the Apple logo for around 4 seconds before the screen turns off; this repeats ad infinitum.
    What do? The nearest Apple Store is three hours away and I have exams on; can't get away before Saturday at the earliest, so I'd like to have some use out of the phone in the near future.

  • Earbuds remote control doesn't work anymore!

    Hi!
    I've had an iPhone 4 since September 2010, and I've always used the earbuds that came with him.They used to work great until this week.
    Now, it's buillt-in remote control doesn't work anymore.By that I mean I can not skip, pause or even use voice control through the earbuds.
    And this probably isn't an iPhone problem, because I tested these earbuds in my iPad 2 and the remote control still doesn't work.
    I noticed that the rubber that used to cover the cable itself is coming off, especially near the remote control area.
    Is there a fix for these unresponsive controls?
    Or what Apple email I should reach in order to ask them about this issue?
    Thanks!
    My iPhone 4 is running iOS 5.0 and so is my iPad 2.

    Is your phone locked in portrait orientation? I've found that for some reason my controls will not work when my portrait orientation is locked.
    Try double-clicking the main button, and then sliding your thumb right. You should get some controls at the bottom of your screen, and the button on the far left is the Portrait Lock button. Try unlocking your phone, and see if your earbuds will then work.
    Hope that might help!
    -Dave

  • When I insert headphones and then I remove them, volume control doesn't works.

    When I insert headphones and then I remove them, volume control doesn't work more, and I have to operate on system preferences=>sound=>output volume. Whay does it happens and  how can I fix it?

        Yes, I am using 09 with out issues.  Just have to remember to use "open with 09" or open pages 09 first then my document.
      I create some amazing cards and posters with 09 that when on a PC I would have to use both Word and Publisher to create.  Flipping back and forth. 
      Apple if you're  listening please, give us back our layout options and even add a few more design options like beveled and 3D text.

  • Volume control doesn't work

    Had 2 kernel panics recently, and been noticing a string of strange issues, one of which is that the Volume control doesn't work, or specifically, it doesn't affect many applications.
    For example, when using Chrome, if I want to use the volume control to icrease or decrease volume on a movie (YouTube etc), the hardware controller keys (F10 - F12) do not have any affect on volume, but I am able to change it using the software interface of the current player.
    Something has gone haywire with my laptop... disks are unmounting as well (USB & FireWire 800), major settings seem to have returned to default (trackpad and other), and installed software seems to have disappeared (eg, Paragon NTFS). I am concerned!
    Help, please!
    I am still using 10.6.8.
    Peter

    I am having the exact same problem. I just did a complete re-install of max os x and did all of the updates..my hard drive had crashed so i had to replace it. lot's of fun.. and after the last upgrade i can't use my sound at all.. the sound shows that it's all the way up but it has the "no Smoking" sign as well..
    i have tried to restart.. change options and whatever else i could .. i did notice that when i enable the option to show the sound icon on the main bar that there is just a blank spot where it should be.. and i can't change it form there either because it just doesn't show..
    any one seen this before.. ?
    all my other Mac's work fine..
    please help..

  • Volume control doesn't work on AOL radio

    The Volume control doesn't work on AOL radio. I does work in iTunes and with music. Is there a way to reset AOL radio?

    To be honest Im not quite sure why this volume indicator is not visible on the screen but in my opinion its really not a serious issue
    I mean the sound is working properly and this is only a indicator which shows you a current sound level
    However, I think its something wrong with an process which cannot be started or a registry issue

  • Volume control doesn't work with headphones plugged in

    When I connect headphones the volume control doesn't work correctly. It should play only through the headphones, but it doesn't. In fact the volume control will bounce back and forth between operating correctly and not working correctly ... And will eventually stop the music. Frustrating!

    ´Till the moment it is, i just recently received a notification with a software update, but i tried with another 3gs with the same characteristics and it worked.

  • I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

    I just downloaded ios 7 and when I'm recording video the camera screen goes black and doesn't record anything. Also in control centre music control doesn't work sometimes. It's been three days.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

Maybe you are looking for