9951 and settings password
Hi,
I had a 9951 on a callmanager 9.1.2 and I always could get in the administration settings menu of the phone.
The same phone is now registered on a CME 10 and suddenly there is this password to access the administrating settings menu.
In the CME I don't use any password in the SIP configuration (uses MAC for security)
I tried 'cisco' but it doesn't work.
Is there a default password, and how can I disable this password.
Using SCCP phones you can use the "service phone" command
Is there something similar for Cisco SIP phones?
Thanks,
JH
Hello Karthik,
Thank you for your quick reply.
Yes this is working, thanks.
Can I have the settings menu without password?
It is not really a big problem, just would like to know.
It seems that in CME (10) the default is that the administration menu is password protected, when I reregister the phone on callmanager 9, I can access the menu without password.
Thanks,
Jan
Similar Messages
-
How do I erase all the content and settings on my 8GB ipod touch without the password or the original computer? This is very frustrating and I think I have it in the DFU mode. I can't seem to figure out how to completely restore this ipod touch. Please help.
Did you get a message in iTunes that said iTunes found an iPod in recovery mode? If not then you might have not gotten the iPod in recovery mode. Try using this program to get the iPod in recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode -
Copying wireless router password and settings to a new Powerbook
I recently bought a second 15" powerbook after my girlfriend bought my former one.
I bought a Lynksys WRT54G Wireless G Router and after some configuration, I successfully connected her powerbook to my DSL connection wirelessly. However I now am having trouble connecting my new PB wirelessly. I am a bit apprehensive about messing with setting a new password, etc, since I might mess up her wireless connection. I remember it took some time to set the router properly.
Is there a way to copy, and or see, ALL of the settings that I configured in her powerbook for this Lynksys Router, so I can copy them correctly to mine?
When I tried before, I had something screwed up because I kept getting different errors as I tried different settings.
So I need to retrieve the PASSWORD and SETTINGS for the Lynksys Router from her BP and copy them to mine.
Can anyone help with this?
Thanks,
Richard
15" Powerbook DL Mac OS X (10.4.3) 1.5 Gigs Ram
G5 dual 2 gigThanks for that info.
I will post this to the Airport section.
The problem is that even after copying all of the settings from my girlfriends PB, including a long password starting with a $, my airport won't connect to the Lynksys wireless network. Airport is turned on (on my powerbook), and 'Ive chosen the proper wireless network with the proper password in network settings. I also added my PB Mac address to the Lynksys router when I was hooked up via an ethernet cable, but I still can't connect the the wireless network. I have both Powerbooks side by side. Hers connects wirelessly and mine doesn't.
I'm missing a setting somewhere, I believe.
Thanks,
Richard
PB 15 DL Mac OS X (10.4.3) 1.5 GIGS RAM
PB 15" DL Mac OS X (10.4.3)
G5 dual 2 gig -
I have a password problem. After importing data and settings from one MacBook Pro to a new one, I have to put my iCloud password in when re-starting the new computer, but the password from the old computer in when waking the computer from sleep. I want to use my iCloud password on both computers consistently. How can I fix this?
The only other place to change a password for the computer login is in Users & Groups preferences. But I don't really know enough here to fix your problem. You can try fixing the keychain:
iCloud- Frequently asked questions about iCloud Keychain
Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com. -
Everytime I close firefox it loses my passwords and settings
everytime I close firefox it loses my passwords and settings, I went and took the tick out of the box so that when I clean my cache they should not be deleted. I have even uninstalled and reinstalled firefox, and it still will not remember passwords etc. I am running windows 7, plenty of ram and gigs to spare. This time I installed mozilla firefox yahoo!7 edition yahooauk-1.8 it says it is up to date
Go to Options -> Advanced -> General and turn off hardware acceleration.
-
I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?
I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others. -
HT201274 When I go to erase all content and settings my phone ask for a password
When I go to erase all content and settings the phone ask for a password.
The same password, you use to unlock your phone, use that passcode.
-
Trying to delete all data and settings off iPad - when it says to type in password, it is then saying it is incorrect although the password is working fine on all other devices.
The answer is here...
http://discussions.apple.com/thread.jspa?threadID=2765287&tstart=0
Thanks to Allan Sampson who has taken time to give me a detailled answer -
How to erase all content and settings when I forgot my password
How do I erase all content and settings on my iPhone 3Gs when I dont remember my Apple ID password and I haven't installed Find my iPhone app on the phone? Thanks!
gomike! wrote:
when I dont remember my Apple ID password
It should be the same AppleID and password you use to log in here.
I haven't installed Find my iPhone app on the phone?
Installing the app will simply allow you to locate a different iDevice.
You don’t need to use it to locate the iPhone in your hands. If it’s not in your hands, you cannot use the app on that device... -
How to erase all content and settings when ipad requests password
How to erase all content and settings when ipad requests password?
gomike! wrote:
when I dont remember my Apple ID password
It should be the same AppleID and password you use to log in here.
I haven't installed Find my iPhone app on the phone?
Installing the app will simply allow you to locate a different iDevice.
You don’t need to use it to locate the iPhone in your hands. If it’s not in your hands, you cannot use the app on that device... -
Currently running Firefox 3.6.23 on Windows Vista
No it will not. Your settings, passwords, bookmarks and other data are stored in another location so they won't be harmed.
As a precaution, you can Backup your Profile before installing Firefox 7
* [[Backing up your information]]
Latest Firefox version is not being currently offered to Firefox 3.6 users. If you would like to upgrade to the latest Firefox version, you can manually Download it from one of these links:
* http://www.mozilla.com/en-US/firefox/new/
* http://www.mozilla.com/en-US/firefox/central/
* http://www.mozilla.com/en-US/firefox/fx/
* http://www.mozilla.com/en-US/firefox/all.html
-> [[Installing Firefox]]
Check and tell if its working. -
I just upgraded to an i5 and am unable to send emails. I can receive them however every time I try to send an email I get an error message saying my username and or password is incorrect. My settings are exactly the same as they were on my old phone... Any ideas?
Contact your email provider and verify you have the correct settings
-
HT5661 What is the password when I want to erase all content and settings?
I am trying to erase all my content and settings and keep getting asked for a password. My initial login 4 numbers do not work - any ideas? I have tried 0000
It's the same code you use to unlock the phone
-
I am trying to erase all content and settings but i forgot my password how do i retrieve it
I am trying to erase all content and settings but i forgot the password. What can i do. How can i retrieve the password
Place the iPod in recovery mode and then connect to your computer and restore to factory defaults/new iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
How can I erase all content and settings without password
I just bought this iPad from my friend, when I try to erase all content and settings, it asked me about the password of his Apple ID password. But he already forgot it! So how can I erase everything back to the factory setting, like a brand new iPad, has nothing in it. Please help and thank you very much.
That is activation lock and cannot be bypassed. He will have to remember his password, or reset it so you can continue with the restore. There's no way around this as it is an anti theft feature to prevent thieves from being able to use the device. It would be pointless if you could bypass it.
Maybe you are looking for
-
My ipod is now recognized on a new computer after old one crashed. I installed itunes on the new computer, and have painstakenly restored all songs and playlists. I also purchased several new songs from the itunes stores. Now my ipod will not sync
-
How to add a html file into JEditorPane
Hi I am doing an aplication on swing.But I don't know how to add a html file to the JeditorPane keeping the html file on the source code. i.e my html file is in my source code.Then how to add this html file to Jeditor pane. Thanks Srikant
-
! Error when copying song from Purchased to IPod play list. How to fix?
! Error when copying song from Purchased to IPod play list. How to fix?
-
Mail.app default account
I've reluctantly reverted back to my GMail account from iCloud as I'm fed up of my iCloud emails disappearing with no explanation from Apple as to why it's happening. How can I set Gmail as the default account in my Mail app?
-
Will not show user information
I created a login page and a user page in DW 8. The login page validates the username and password and takes you the user page correctly. When I create a recordset query on the user page to show information from the access database it works fine, but