9i and 9ias installation on SuSE linux 7.3

Hi,
Are there any known issues involved in installation of 9i
and 9ias on SuSE linux 7.3 ??
Also please let me know what are the workarounds for those
problems and where the patches may be downloaded from ??
I am asking this question because SuSE 7.3 is not yet
certified by oracle.
Thanks,

For the database, look at
http://www.suse.com/en/support/oracle/db/9i_73.html

Similar Messages

Linux and 9iAS Installation - Some Effort Finding The Easy Way

I'm reading forums and documention for days. During the past 12 months, I spent more time as administrator of 'my versions' of Portal and 9iAS then in development process. Now, I'm ready to start clean instalation on Linux, reather then another upgrade.
I found that 9iAS 1.0.2.2.x is certified with 9i Database, but... Always there is some but...
Also, I expirienced problems with diferent distributions / versions of Linux.
Try start with hypotesis that:
1. I have not any prefered LINUX distribution or version.
2. Database 8.1.7.1 or 9i - no prejudice.
What combination can satisfy one simple criteria - clean and quick instalation - no tricks, no cheating. Just simple StepByStep guide.
Is RedHat7.2 + 9i + 9iAS 1.0.2.2.1 OK.?
Or RedHat6.2 + 8.1.7 + 1.0.2.2.1 ?
Or some Suse + ... ?
... anything that works ;)
ciao
''''Srdjan

OK. We made some progress :)
It looks like Suse is more Oracle friendly than RH :)
Damir, thanks for useful link.
In this moment, we can assume that:
- >>Suse7.2 + 9iAS 1.0.2.2.1<< will work fine.
- >>9i database + RH or Suse 7.x<<, too (according to link provided by Damir, there is acceptable procedure to get these things together).
BUT, what is with combination
9iAS 1.0.2.2.1 + 9i Database (9.0.1)<<?Is there real compatibility within these two products, or there is just casual sharing of small italic i and some numbers in their names :)
ciao
Srdjan

Oracle 8i installation on SUSE Linux 7.0 and 8.0

I have not been able to install Oracle 8i (8.1.6) on SUSE linux 8.0 as well as 7.0. The Universal installer starts but stops after showing a lot of messages. Any suggestion/help?

The configuration of my machine is: Intel P3 733 MHz on Intel 815 original motherboard, 256MB RAM, 40 GB Harddisk

Oracle9i Installation on SuSe Linux 7.3 Professional Edition

Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"
But after the Linux insalltion I found that only make executable is present and other doesn't. My doubt is, if I continue with the Oracle Installtion without these files does the installer cause any problems? If so how do I get these executables, as these executables doesn't exist in the "Software Installation" listing of SuSe 7.3 Professional edition?
Another doubt is, Does SuSe 7.3 Professional edition suitable for Oracle 9i Database server? I checked the Kernal version, it seems to be OK.
Please help.
Thanks in advance
Sriram Subbiah

Hi,
I'm trying to Install Oracle 9i Database server on SuSe Linux 7.3 Professional Edition. I have gone throgh the Oracle 9i release notes for the Linux version. In the release notes document, in the OS Software Requirement section ( the following statement is mentioned as below ):
"The following executables must present in the /usr/bin directory : make, ar, ld, nm"Thats compiler, linker and linktool, install "binutils"!
Sincerly,
Christine

R12 EBS Installation on Suse Linux 9.0

Dear Friends,
I am doing a dual installation of oracle 12 ebiz on suse linux 9.0 and i my installation hangs on with the following message , having checked metalink, forum notes , i have run the autoconfig and the autoconfig on the application tier
fails (i have pasted the below this )
Login Page
checking URL = http://bhmlx40.uat.itvplc.ads:8010/OA_HTML/AppsLogin
RW-50016: Error: - {0} was not created:
File = {1}
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL=''
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : shmlx43
sDbDomain : uat.plc.ads
sDbPort : 1531
sDbSid : PROD
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@shmlx43.uat.plc.ads:1531:PROD
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shmlx43.uat.plc.ads)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=PROD)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=shmlx43.uat.plc.ads)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=PROD.uat.plc.ads)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
Can you please help me to resolve the above problem , if someone has come across this problem
Thanks in advance
Kind regards
Sri

Thanks John, hsawwan
The problem was actually , i was doing a dual node installation , i didnt have valid entry of my database server on the application server , i mean the fully qualified domain name , i have changed it and the installation went fine . I am having another problem now . I cant login to the user login page from my windows box
as it ends up with page not displayed message . Once the installation was done
I had an option of connecting to the URL directly from the installation page itself which went fine but i cant connect the same URL from my windows box , i have made valid entry under hosts file on the window box and i believe it should work
I am not sure why its not working . I am sure that Apache is up Can one of you help me with this problem
kind regards
Sri

Unable to continue the installation in suse linux

hi,
this sudheer
my system environment as follows;
operating system:open suse11.0
Java devloper kit:jdk1.6.0 for linux
processor:amd 64
hard disk:250 gb
DBMS:maxdb 7.6
1.i have extraced the file of IBMjava2-JRE-1.4.2_12 amd64.tgz into opt folder.
   but i used default jdk 1.6.0 which is came from the open suse11.0.
2. i have decalred the environment variables as follows;
   for java
   export JAVA_HOME=/usr/lib/jvm/java-1.6.0
   export PATH=/usr/lib/jvm/java-1.6.0/bin
   for SAP Installation master
   export SAPINST_JRE_HOME=/usr/lib/jvm/java-1.6.0/jre
   export DISPLAY=water:0.0
3.i have created sapmnt folder in /
4. but during the third phase of instalation(unarchived files) solution manager
    it is unable to continue
regards
sudheer koppala

Hi Sudheer,
I am sorry but I guess you are using the wrong versions here
SAP does not support SUSE11 and also Java version should be 1.4.2.....
SAP only supports SUSE Linux Enterprise Server 10,SUSE Linux Enterprise Server 9,SUSE Linux Enterprise Server 8
Refer to SAP notes 171356 for SAP on Linux
1172419 for Java versions
These are highly useful
Let me know if you need any other info.
Rohit

Steps on ecc6 installation in suse linux

hi sir/madams
i am new in ecc6 installation on linux systesm please provide a sap installation steps on suse linux...and thankul to all
regads
suresh

Check the install guide as above for ECC/ERP 6.0 and also be sure to check the following SAP notes:
Note 171356 - SAP software on Linux: Essential information
Note 1275776 - Linux: Preparing SLES for SAP environments
Depending on the version you running:
Note 1310037 - SUSE LINUX Enterprise Server 11: Installation notes
Note 958253 - SUSE LINUX Enterprise Server 10: Installation notes
Nelis

Content server installation on susi linux 9

Hi friends
this is first time i am installing content server on linux system . and i facing too many problems as iam really not aware of linux
anway can provide me step by step details to install and configure content server on linux operating system

Hello!
I presume (taking the name of this forum) the original question was about SAP ContentServer?
This would be a rough description how to configure a SAP CS/CSC for FileSystemStorage
0) if linux is not your platform of choice (it would be mine) - take a different platform
1) read and understand SAP notes, especially 664384, 586895 and related
2) make sure you are using an enterprise linux (cf. service.sap.com/PAM)
3) your linux installation should (amongst others) contain
    a) gcc (GNU c-compiler)
    b) gdbm-devel
    c) libexpat
in general this would be described as a development (with regard to software building) system by some linux distro's
4) retrieve the apache 2.0.x (for allowed x: cf service.sap.com/PAM) source code to build your own apache
5) be root user
6) create group sapsys
7) create user csadmin, primary group: sapsys
8) you may want to create an own filesystem for content, e.g. /SAP
9) as user csadmin build apache with option (amongst others) --prefix=/home/csadmin (presuming this is csadmin's HOME)
10) if you also need the cache server (you will as soon as you have more than 1 location, repeat 6, 7 and 9 for user cscadmin
11) as root (make sure you have X), execute sapinst from the installation master
12) installation almost as under Windoze - don't use AdminSecurity as it will not work with modern UNIXes (ContentServer wrongly assumes that /etc/passwd contains the crypted passwords and there's a note proposing to put it there - security alert in my humble opinion) - better to protect transaction csadmin
13) you should be all set
I hope I didn't forget anything - this was from memory.
Contact me if you have problems.
Good luck and best regards, Markus

Ecc 6.0 installation on suse linux 10 server

can anyone plz send me the step by step procedure of installing ecc 6.0 on suse linux 10

srjn_123 wrote:
can anyone plz send me the step by step procedure of installing ecc 6.0 on suse linux 10
Inappropriate Question.
If you have SAP OSS access, then please browse through service.sap.com/instguides --> SAP Business Suite --> ERP --> ERP 6.0
Read the Guides.
Thanks

9iAS installation Error on Linux(Red Hat)

Friends,
We are trying to install 9iAS(9.0.2...) on Linux and after 6% of installation the system gets hanged with out any error message,attaching the contents of the log file generated in OracleInventory/logs:
Calling action unixActions2.1.0.8.0 createLink
     source = /home/oracle/jre/1.3.1/bin/.java_wrapper
     destination = /home/oracle/jre/1.3.1/bin/java
     overwriteExistingLink = true
Kindly Help
Thanks in Advance
Sameer M
[email protected]

You might want to post this question in the Linux or Application Server forum for an appropriate response:
Linux forum: Generic Linux
or Application Server forum: Oracle Application Server - General
Regards,
OTN

Oracle 9i Installation on SuSE Linux 9.0

I am trying to install Oracle 9iR2 on SuSE 9.0
All pre-Installation Setup was done like i saw on Suse web pages (create Oracle-User, oinstall-usergroup etc.)
I login as root-user on the system and open a shell session (localy) as oracle user with :: sux oracle :: command.
I started runIstaller and got the welcome windows from oracle Installer. i can click on each button but the button next is not reacting so that i could go to the next window. Can you please tell me why the installer is not properly working?

you have to unlock the numpad key on your keyboard.

Forms Services and 9iAS Installation iisues

I need to use 9iAS and Forms and Report services only for my application. IS Portal a requirement for this. Is there a way that I could install the 9iAS core edition and then selectively install only Forms and Report Service?
Any help would be welcome.
Thanks
Arul

I need to use 9iAS and Forms and Report services only for my application. IS Portal a requirement for this. Is there a way that I could install the 9iAS core edition and then selectively install only Forms and Report Service?
Any help would be welcome.
Thanks
Arul Arul,
No, you cannot just install Forms and Reports without Portal and Wireless. You can however, stop the services that you don't need to use after installation.
HTH,
Ashesh Parekh
Oracle9iAS Product Management

SUSE Linux 8.0 + 9iAS r2 = Success

Hi PPL, just reporting success and performance inscrease under Suse Linux 8.0:
I can say that Oracle 9iAS under Linux for me performs at least 25-30% faster than Windows. I've installed IAS and INFRA in only one machine:
Pentium 4 1.8Ghz
1 GB RAM
1 SCSI 15kRPM IB DISK
Adaptec Ultra 160 controller
2 GB SWAP
I use PORTAL, FORMS, REPORTS and WIRELESS... I've installed the BUNDLED INTER-OPERABILITY PATCH Version of 9iAS r2, so i did not had to apply that patch. I've just applied today one CORE patch that was released in September for Linux/Unix versions and yesterday for Windows versions (patch 2542920)
I've used SUSE 8.0, installed the Korn Shell package (KSH) and followed instruction on this VERY USEFULL whitepaper at htis site : www.stute.net !
Remember to change SHMMAX parameters for the kernel as explained in www.puschitz.com !
My last installation was made in 3 hours (SUSE installation included)
Other tricks was i had to execute: xhost + as root to let oracle set DISPLAY and runInstaller! The linking errors were easily solved as explained in www.stute.net whitepaper.
I've created a script to startup the INFRA database, but i couldnt start up automatically all services (OC4J's, HTTP, WEBCACHE), so i start them manually in OEM site http://mysite:1810
I'm not a Linux GURU, but now i feels satisfied with performance and with stability.
More... in Linux i can compile my FORMS files (FMX) even when they are used by someone user in a forms session.
And even better is that PATCHS for Linux/Solaris usually are on "street" 1 month before Windows versions.
Of course, I go crazy everytime i found bugs, but usually they are not plataform related.
Joao Oliveira
PS: If anyone needs help, i can give help online yusing ICQ messenger. My number is 23234761

Hi
I installed on SUSE Linux 8.0 the 9iAS R2, only the option A - J2EE and WebChache. Now I have following problems.
1. Some configuration tools (OC4J, OPMN, DCM)were not initialized in the end of the installation. I read other postings with the same problems, but i never read a solution of these problems.
2. After installation, i want to start the http server manually (dctml start -ct ohs) , but it doesn't work. I got the error message ADMN 100999, i dont know why !
If i want to start the http-server with enterprise manager (EM worked partically) I got an EMException.
I have no idea to resolve the problems, perhaps you
Thank You

MiniSAP WAS 6.10 and JAVA 1.4.1 (SUSE Linux 9.0)

Hello all!
I have some problems with the MiniSAP installation under
SUSE Linux 9.0.
I use the MiniSAP WAS 6.10, SAP DB 7.3 and the SAP Gui for the JE 6.10.
The Problem comes with the Java 1.4.1. In the documentation from the SAP CDs is the version IBMJava2-JRE-1.3-45 required.
If I try to run the SapGui i get many errors from Java (I think).
Anybody has a idea ?
Regards
René
e-mail: [email protected]

Hello René,
I think you should download the latest SAP GUI for JAVA at: ftp://ftp.sap.com/pub/sapgui/java/630r4/PlatinGUI-Linux-630r4.jar
Regards
Gregor

JDK & Suse Linux - cannot use JMF or run JMSTUDIO

Hi
I have tried using JMF and running jmstudio with SuSE linux 10.0
Every time I try and run jmstudio I get the following error:
Exception in thread "main" java.lang.NullPointerException
at sun.awt.X11.XMenuPeer.repaintMenuItem(XMenuPeer.java:363)
at sun.awt.X11.XMenuItemPeer.setEnabled(XMenuItemPeer.java:71)
at sun.awt.X11.XMenuItemPeer.disable(XMenuItemPeer.java:93)
at java.awt.MenuItem.disable(MenuItem.java:280)
at java.awt.MenuItem.enable(MenuItem.java:267)
at java.awt.MenuItem.setEnabled(MenuItem.java:242)
at JMStudio.updateMenu(JMStudio.java:1274)
at JMStudio.<init>(JMStudio.java:119)
at JMStudio.createNewFrame(JMStudio.java:1412)
at JMStudio.main(JMStudio.java:1401)
Please can someone tell me if this is a problem with environment variables?
I have tried to set up my .bashrc but if someone has a working configuration file I would gladly try it
I am a final year student and am using JMF for my project and DESPERATELY need to get JMF running
Any help would be gratefully received
Regards
Uri

In NetBeans using JDK1_5, all you have to do is :
step 1.) tools -> library manager.
step 2.) Click on New Library.
step 3.) Name the Library Name JMF (or whatever).
step 4.) Leave Library Type as Class Libraries.
step 5.) Click OK.
step 6.) Select the library you just made in the
listbox on the left.
step 7.) In the center of the form you are in, you should
see a white box with three tabs on top (Classpath, Sources, Javadoc).
Make sure Classpath is selected.
step 8.) On the right , click on the Add Jar/Folder... button.
step 9.) A dialogue box will pop up. Select the directory where your
you put JMF. Add the .jar files from the JMF's lib directory and
click the Add Jar/Folder for that dialog box. Repeat step 8.
When finnished, you should have three .jar files in your newly
created library(I called mine JMF). The files should be jmf.jar,
mediaplayer.jar, and multiplayer.jar.
step 10.) Create a project.
step 11.) In the Projects pane, expand Libraries which you will see
whatever JDK you are using and any other libraries you
happen to be using. Right Click on Libraries there and
click Add Library. A popup window displaying libraries
will show and the one you just created should be in there.
step 12.) Highlight the library you made and click its Add library
button.
You should now be able to use JMF in your apps! I assume you
know about importing the packages in your sourcefiles!!!! ;-)
Have fun whichever way you do! Please don't email me with
dumb questions. Seeya!

9i and 9ias installation on SuSE linux 7.3

Similar Messages

Maybe you are looking for