9i AS on Red Hat 7.0

has anyone here been able to install 9i AS on
Red Hat Linux 7.0?
i can't even open the universal installer! all
i get is a SIGSEGV error upon runnign runInstaller! anybody know how to solve this
problem?

Let me add to the earlier post, there is a fix available for the glibc version conflict. RH7.0 uses v2.2 and Oracle expects v2.1. The kernel archives has a fix available at ftp://ftp.kernel.org/pub/software/libs/glibc/hjl/ - as far as I know it is not supported by Oracle at all. I have not tried it, but if you are stuck on RH7.0, then it may be worth your time to try it.

Similar Messages

Oracle 8.1.5 on red hat 6.1

hi,
i am trying to install oracle 8.1.5 on red hat 6.1, i entcountered the when i am trying to run runInstaller.
initializing java virtual machine from
/usr/local/jre/bin/jre please wait.....
error in createOUIProcess(): -1
:permission denied.
I have installed jre1.1.6 v5 downloaded from
blackdown.org as a root user.
I am unable to understand why this permission denied problem is coming.
please help out.
thanks
rajneesh
null

You need JDK. the same version of jre that u used.
then export CLASSPATH to point to classes.zip of the jdk.
Thanks

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

Classes not found when compiling for jdk1.3.1_01 on red hat 7.2

I have just installed jdk1.3.1_01 (rpm) on linux red hat 7.2
I have written a small program to test, however, the compiler isn't able to locate the classes.
import javax.swing.*;
public class JTest {
public static void main( String args[] )
JOptionPane.showMessageDialog( null, "Hello", "Test Dialog",
JOptionPane.INFORMATION_MESSAGE );
System.exit( 0 );
When compiled it generates the error:
JTest.java:10: error:Variable "JOptionPane" is not defined in current context
I have the path and classpath set to what I think are the correct directory paths.
Any advice would be much appreciated!
Thanks..

Sorry, typo in the classpath... but now when I compile
I get error: "segmentation fault" then nothing else.
This also happens when I execute a precompiled app (eg
"java OldApp").This is to do with GLIBC-2.2, I believe. :/ (Pointed out by Niteen. :)
"ulimit -s 2048" should fix this. Adding this line to /etc/profile or your ~/.profile shall automatically run this command every log in.
Bhav

Installation Problem Oracle 9.2.0.4 on Red Hat Linux 5

I have installed Red Hat Enterprise Linux 5. I want to install Oracle 9i (9.2.0.4) Server.
I have created oracle user and set oracle home directory in the .bash_profile.After that i run runinstaller file but the message comes as below..
'The user is root. Oracle Universal Installer cannot continue installation if the user is root. No such file or directory.
Please tell me the actual solution.
- Prasanta

First of all, as pointed out by Hans, make sure you perform the installation with the oracle user, not root.
Next, you should be aware that installing Ora9iR2 on RHEL5 is neither supported nor planned, so you must be aware you will be on your own. There is no official procedure to install 9i on RHEL5, however, considering you will use this for personal purposes, not production, you can attempt the procedure provided by Ivan Kartik --> Oracle 9i on RHEL 5.
~ Madrid
http://hrivera99.blogspot.com

Oracle 8.1.7 installation problem on ( linux) red hat 7.1

HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Hi,
My name is Fridirick REMBEAUX and I have the same problem. ;))
I did not understand the first point after :
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
At which url can I get this script ?
I think that maybe it's not the same problem because the installer and so the jre
still executed but nothing else appears.
And I'm also lost. When did the oracle products work well ??
I think I damned.
Hi
I get same Problem on Rh7.3 !But when i execute 2 Step will be OK!
1. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
2. export LD_ASSUME_KENERL=2.2.5
HI,
I AM TRYING TO INSTALL ORACLE 8.1.7 ON LINUX RED HAT(7.1).
AFTER DOING ALL THE STEPS WHEN I RUN(./runInstaller) I am getting message
"Initializing java virtual machine from ../stage/components/oracle.swd.jre/1.1.8/1/datafiles/Expanded/Linux/bin/jre. please wait" and the execution terminates.
PLEAE HELP ME please help me !!!!!!
Also let me know which file to untar in the CD (linux81701.tar & glibc-2.1.3-stubbs.tar) also installed JDK1.1.8.
Please help Me..

Do you have oracle9i relink problem on Red Hat 7.1? READ THIS!

Red Hat 7.1 ld program has problem.
because that is applied elf_i386_glibc21 emulation patch for oracle8i.
downgrade binutils package or rebuild excluding glibc21 emulation patch.
and relink all :)
ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/RedHat/RPMS/binutils-2.10.0.18-1.i386.rpm
ftp://ftp.redhat.com/pub/redhat/redhat-7.1-en/os/i386/SRPMS/binutils-2.10.91.0.2-3.src.rpm

What about instead the java tools like
netasst and dbca (or also srvconfig srvctl:
I used the oracm config without using those tools for configuring rac).
Anyone found how to have them running on rh 7.1? I tried some suggestions from the list
but none works.
Bye,
Gianluca

Install Problem on Red Hat 7.1

When I try to install Oracle 8.1.7 on Red Hat 7.1, and run the
runInstaller, but nothing happens. Even no Welcome Page is
displayed.
[oracle@localhost Disk1]$ ./runInstaller
Initializing Java Virtual Machine
from ../stage/Components/oracle.swd.jre/1.1.8/1/DataFiles/Expande
d/linux/bin/jre. Please wait..
[oracle@localhost Disk1]$
I have create the group and user for installation, install Java
SDK 1.3.1 and set the path. Can anyone show me some directions
about what is the problem and how to solve the problem?

Thanks Olaf Tiemann,
I have not installed those packages yet and try the installation
again.
Finally I install the Oracle successfully and get the DB
running, though there are still 2 minor errors.
1. Error in invoking target relink of
makefile /oracle/OraHome/ctx/lib/ins_ctx.mk, the patch glibc-
2.1.3-stubs.tar.gz seems does not relink/replace this .mk file
2. Error when running the Root.sh, there are 2 sytnax errors at
the beginning of the script
It will be perfect to get rid of these 2 errors.
Anyway, my DB gets running.

Oracle Forms (11.1.2.2.0) is supported on RED HAT 7

Hi, all...
I need know if Oracle Forms (11.1.2.2.0) is supported on RED HAT 7, in certmatrix, the RED HAT 6 is supported, if I install in RED HAT 7, Oracle supports the product?
Thank you.

This forum is dedicated to support the Oracle Maven Repository and related Maven functionality and therefore, are unlikely to find answers to your Oracle Forms-related questions here. However, if the certification matrix does not explicitly list RHEL 7, that means that it has not been certified to run on RHEL 7.

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Problem with Javamail in Red Hat

Good afternoon.
I have a problem with javamail in Red Hat.
When i send a email in windows with my application, works well. But in Red Hat no works.
Gives the following error:
Java.lang.ClassCastException .... gnu.mail.handler.TextPlain
Does anyone know that happens?

You have much to learn. This is the wrong forum for most of it.
You should be able to use the package manager in Linux to
uninstall the Gnu version. Then read this:
[http://java.sun.com/products/javamail/FAQ.html#install|http://java.sun.com/products/javamail/FAQ.html#install]

Recovery failed during homognuos System copy maxdb 7.7 red hat 5.4 ECC 6.0

Hi all,
         *Actully i have one Development Server with ECC 6.0.. + maxdb 7.7 database    OS Red Hat 5.4.
Please help us to what username and password we can give....i am from oracle backgroud so i am a newbie in maxdb.
Source System
ECC 6.0
OS Redhat 5.4
SAPSID   WIA
Target system
ECC 6.0
OS Redhat   5.4
SAPSID    WID
Now i am going to Create Quality Server for my landscape using homogenoues system copy ....option in target machine... and I have taken database backup (offline backup) also...
But during system copy it is asking for Database recovery . For recovery i am using DATABASE MANAGER TOOL (DBMGUI 7.6 maxdb) but it is asking for IP ,DBname username and password.
I have given the IP and DB Name but dont know the username and password for the target Machine SAPSID
Because at the time of system copy it asked for database recovery before creating the database users phase .
I checked with xuser list from command line it is showing no values.
Tried with the username and password given at OS level and the password for Source system but no luck.
So what to do.....
Please help

Hi,
thanks for your reply.
I am sahil garg and amkum82 user we both are working on the same issue.
We both are from oracle backgroud.Newbie in maxdb.
We have are following the 129352 note for homogenous system copy.
      2. Target system:
            b) Restore:
            Before the restore, you must initialize the target instance. This initialization formats the log area. Data volumes are only formatted if they are not configured as raw devices and are not available in the configured size.
            We dont know how to create instancefor tarhet system in maxdb for homogenues system copy.Could you please help us out what steps needed to be executed for this.
Thanks Regards,
Sahil

Using Linux/Red Hat/Intel for Sun ONE/Java Directory Server

Anybody have any experience of this? We're looking to get off AIX, and Total Cost of Ownership for using Solaris/Sparc versus Linux/Intel is very similar.
The decider will be if no-one is using Linux as a platform for Sun ONE/Java Directory Server....
Any feedback would be appreciated....

We run Directory 5.1 in production on Solaris/Sparc, but I've tried it with sucess on Red Hat 7.2 on Intel. We have not been able to get it to work on Red Hat Enterprise 2.1 or 3.0. The main problem has been that the administration server fails on startup. Obvious the lack of support for the latest enterprise class Linux is a huge drawback. At this point I've decided to stay on Solaris/Sparc until Red Hat comes out with its own release of Netscape's Directory. When that happens we're going to evaluate whether to move the whole environment to Red Hat. The Sun and Netscape servers are almost identical in terms of features and performance, but having an open source version that can run on less expensive hardware would be a terrific win for us.

Error connecting to Oracle on Red Hat 7.2 with WL 7.0

I able not able to connect to Oracle on Red Hat 7.2. I have tried both 9.0.1 and 9.2.0.
I am able to use a very similar configuration and W2k and it works.
Here is the situation:
I have installed Weblogic 7.0.0.1 on Redhat 7.2. It works fine in generic form.
I have also installed Oracle 9.2.0 client files. I have verified connectivity with
a remote database using the Oracle tnsping tool. I have modified the startWLS.sh
file so that the oci901_8 libraries are used by Weblogic. I have added the following
line to startWeblogic.sh:
------ BEGIN code snippet ---
# --- Setup Oracle ---
LD_LIBRARY_PATH=${ORACLE_HOME}/lib
POST_PATH=${WL_HOME}/server/bin/oci901_8:${ORACLE_HOME}/bin:
------ END code snippet ---
My config.xml file has this entry (which works on NT)
---------- BEGIN config.xml snippet ------------
<JDBCConnectionPool DriverName="weblogic.jdbc.oci.Driver"
Name="wamiPool-Oracle"
Properties="user=bomb;password=wami;server=WAMI_DB"
Targets="myserver" TestTableName="Country" URL="jdbc:weblogic:oracle"/>
--------- END config.xml snippet ------------
On startup I get this error:
------- BEGIN Error -----------------
####<Jul 11, 2002 8:20:08 PM GMT> <Error> <JDBC> <appbox> <myserver> <Thread-1> <kernel
identity> <> <001060> <Cannot startup connection pool "wamiPool-Oracle" weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Error while trying to retrieve text for error ORA-24327 -
(bomb/********@WAMI_DB)
at weblogic.db.oci.OciConnection.getLDAException(Compiled Code)@b8dbe80
at weblogic.jdbc.oci.Driver.connect(Compiled Code)@b8d7910
---------- END ERROR -------
I have also tried using the Weblogic dbping utility. When I use this I get this
error:
---------- BEING ERROR from dbping ------
Starting Loading jDriver/Oracle .....
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0x4d6b88a1
Function name=snauca_check_adapter
Library=/opt/oracle/product/9.2.0/lib/libclntsh.so.9.0
Current Java thread:
at weblogic.db.oci.OciConnection.native_loginwithblock(Native Method)
at weblogic.db.oci.OciConnection.login(OciConnection.java:190)
at weblogic.jdbc.oci.Driver.connect(Driver.java:126)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:175)
---------- END ERROR -------
Any ideas?
David

Hi David,
The driver for 9.2.0 is not yet out. You may want to use the thin driver.
You can also request this driver by filling a support case.
sree
"David Kinsfather" <[email protected]> wrote in message
news:[email protected]...
>
ORACLE_HOME is set to
ORACLE_HOME=/opt/oracle/product/9.2.0
and LD_LIBRARY_PATH is set to
LD_LIBRARY_PATH=${ORACLE_HOME}/lib
These are same values I used for the tnsping which does work.
Any other ideas?
Joseph Weinstein <[email protected]> wrote:
David Kinsfather wrote:
I able not able to connect to Oracle on Red Hat 7.2. I have tried both9.0.1 and 9.2.0.
I am able to use a very similar configuration and W2k and it works.
Here is the situation:
I have installed Weblogic 7.0.0.1 on Redhat 7.2. It works fine in
generic
form.
I have also installed Oracle 9.2.0 client files. I have verified
connectivity
with
a remote database using the Oracle tnsping tool. I have modified thestartWLS.sh
file so that the oci901_8 libraries are used by Weblogic. I have addedthe following
line to startWeblogic.sh:
------ BEGIN code snippet ---
# --- Setup Oracle ---
LD_LIBRARY_PATH=${ORACLE_HOME}/lib
POST_PATH=${WL_HOME}/server/bin/oci901_8:${ORACLE_HOME}/bin:
------ END code snippet ---
My config.xml file has this entry (which works on NT)
---------- BEGIN config.xml snippet ------------
<JDBCConnectionPool DriverName="weblogic.jdbc.oci.Driver"
Name="wamiPool-Oracle"
Properties="user=bomb;password=wami;server=WAMI_DB"
Targets="myserver" TestTableName="Country"
URL="jdbc:weblogic:oracle"/>
--------- END config.xml snippet ------------
On startup I get this error:
------- BEGIN Error -----------------
####<Jul 11, 2002 8:20:08 PM GMT> <Error> <JDBC> <appbox> <myserver><Thread-1>
<kernel
identity> <> <001060> <Cannot startup connection pool "wamiPool-Oracle"weblogic.common.ResourceException:
weblogic.common.ResourceException:
Could not create pool connection. The DBMS driver exception was:
java.sql.SQLException: Error while trying to retrieve text for error
ORA-24327
(bomb/********@WAMI_DB)This usually means that the environment variable ORACLE_HOME is not set,
or set incorrectly.
at weblogic.db.oci.OciConnection.getLDAException(Compiled
Code)@b8dbe80
at weblogic.jdbc.oci.Driver.connect(Compiled Code)@b8d7910
---------- END ERROR -------
I have also tried using the Weblogic dbping utility. When I use thisI get this
error:
---------- BEING ERROR from dbping ------
Starting Loading jDriver/Oracle .....
An unexpected exception has been detected in native code outside the
VM.
Unexpected Signal : 11 occurred at PC=0x4d6b88a1
Function name=snauca_check_adapter
Library=/opt/oracle/product/9.2.0/lib/libclntsh.so.9.0
Current Java thread:
at weblogic.db.oci.OciConnection.native_loginwithblock(NativeMethod)
at weblogic.db.oci.OciConnection.login(OciConnection.java:190)
at weblogic.jdbc.oci.Driver.connect(Driver.java:126)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:146)
at utils.dbping.main(dbping.java:175)
---------- END ERROR -------
Any ideas?
David

Problem with activesync provisioning user from ldap to red hat

hello,
i am using activesync to provision the user from ldap to red hat linux . i am getting the following error message
An error occurred adding user '#########' to resource 'Red Hat Linux'.
Script failed waiting for " PASSWORD:" in response "passwd: Only one user name may be specified.
_,)#+(:"
Script processor timed out with nothing to read and the following unprocessed text: "passwd: Only one user name may be specified.
_,)#+(:".
when to try to assign redhat resource to a user from the idm the user is getting provisioned to redhat successfully .active sync form is working for all the other resource except the redhat.
can anyone give me solution for the above problem
thanks in advance.

Have you set the xhost as ROOT (xhost +hostname), and then as the ORACLE user type "export DISPLAY:0.0" (without the quotes of course) ? This needs to be done prior to running the installer. Try this site for further information - http://www.puschitz.com/OracleOnLinux.shtml

Error while installing Oracle 9.0.1 on Linux Red Hat.

I am trying to install Oracle 9.0.1 on Linux Red Hat (Enterprise Edt), and getting this long error---
"Initializing Java Virtual Machine From /tmp/OraInstall0/jre/bin/jre. Please wait...
:symbol errno. version GLIBC-2.0 not defined in gile libc.so.6 with link reference (libzip.so) unable to initialize thread: cannot find class java/lang/thread
Could not create Java VM."
Any workaround for the above error.

try execute: export LD_ASSUME_KERNEL=2.4.1 before you run ./runInstaller
Btw try look at http://www.puschitz.com for installation guide.

9i AS on Red Hat 7.0

Similar Messages

Maybe you are looking for